Adobe X Pro "Scanner was not found"

Conguration:
Win-7 64 bit; Adobe X Pro; Canon MF4350 printer/scanner; Canon MF4350 64-bit drivers and Toolbox installed.
Issue:
This configuration used to work fine for scanning from Adobe, but for some reason now stopped, giving the following error:
"Error while interacting with scanner: the selected scanner was not found."
If I login to Windows as Administrator or another user, it works fine.
If I scan from another program it works fine (eg, the Canon scan utility).
Adobe X Pro has the MF4350 in the dropdown list of scanners.
Windows Device Manager has the scanner listed without any problems.
I have tried various things found in the following link:
http://forums.adobe.com/message/3397818#3397818
I have done System Restore to a point before the problem began.
I have tried copying the Administrator Adobe directories from the Admin User to my User under Windows directory.
Still, the error persists.  HELP PLEASE !!!!!!!!!!  The Adobe X Pro scan/append feature is critical to our workflow.  Thank you.

Solution is to install TWAIN drivers for your scanner. I think HP stopped providing TWAIN Drivers for 10.7 and 10.8. You can try downloading the drivers from:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4082&lc=en&cc=us&dlc=en&sw_lang=&pr oduct=391153#N181
Select your OS as 10.6, download and install the .dmg. I think they should work on 10.8 too
Thanks
Varinder

Similar Messages

  • Selected Scanner Was Not Found

    I am running Windows 7 Pro 64 bit, and Acrobat 9 pro. I have a HP Scanjet 7650 on my desk, hooked up to my laptop via usb cable.  I have been scanning for over a year, no problem.  Today, when I got to work, I tried to scan something and it gives me this error: Error while interacting with the scanner; the selected scanner was not found.  I have tried the Twain, WIA, Native Interface, non native interface, presets, custom. every option and combination and it gives me the same error.  I unplugged the cables, reinstalled HP drivers, I reinstalled Acrobat.  It works fine if I right click on the scanner from the devices/printers box and click on 'scan'. it just won't work with Acrobat.

    I deleted and reinstalled the twain drivers two or three times and it finally started working today with acrobat 9

  • An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Get this error when trying to install Logic patch 9.1.4 to my machine.
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Thx, but i had already read that and tried it: did not work.
    Got it fixed now by reinstalling Logic Studio 9 from DVD.
    That indeed creates the Logic Pro folder in Applications - something I had tried earlier by simply moving my existing Logic folder. This means the Logic 9.1.5 update does not simply check a folder name: there must be another entry/registry entry it checks. Reinstalling Logic Studio from scratch solved it for me.
    After reinstalling thought Lion forgot my Focusrite Saffire 40, so no DAW. Solved that by reading a forum entry on beta drivers.
    So I am happy, music creation wise.
    Left for me is to solve the X Mail application saying it does not run under Lion!
    Model Name:          Mac mini
      Model Identifier:          Macmini3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.26 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          1.07 GHz

  • I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder.  This Update require Logic Pro Version 9.0 or higher".  I have Logic Pro Version 9.1.1 installed.

    I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder.  This Update require Logic Pro Version 9.0 or higher".  I have Logic Pro Version 9.1.1 installed.
    I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it.  What do I do now?

    Niel:  Thanks. 
    For others benefit, here is what happened.
    I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
    My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder.  It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works.  Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update. 
    Solution:  I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm. 

  • I can not use CanoScan N670U with my Macbook pro. I download canoscan toolbox 4.1 from Cannon website. It keep saying "the scanner plug-in was not found". Please help

    I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help

    There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
    Problem:
    You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
    You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
    You get a couple of error messages, which you click through.
    You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
    Solution:
    BEFORE you restart, and with the installer package still open -
    1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
    Applications : Canon Utilities
    Applications : Canoscan Toolbox
    and remove the prefix Into_ from each folder
    2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
    Library : CFMSupport
    and if it didn't, move it there yourself
    THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know.

  • HP Officejet Pro 8500 A909G – The HP Imaging Device was not found

    I have a HP Officejet Pro 8500 Wireless A909G.  My operating system is Windows 7 Home Premium 64bit that was upgraded from the original Windows Vista 64bit that came installed on my HP Pavilion Elite m9400t CTO Desktop PC.
    After performing the Windows 7 upgrade I installed OJP8500vA909_Full_13 to support the 8500, and everything worked fine.
    I recently noticed that the scanner function had stopped working from Solution Center, and uninstalled V13.  I downloaded and installed OJP8500vA909_Full_14.  The install completes without error, but then I get scanner error “The HP imaging device was not found”  with extended error code 8, [(1,0, -2147221164)].
    I have performed all the suggested Solution Center steps to resolve the error without success. Including:
    1) Updated the firmware to OfficejetPro8500A909g_R1006B_ENG
    2) Ran OJP8500vA909_Corporate_Scrubber_14
    3) Uninstalled all programs, deleted %temp% files, and changed the startup using MSCONFIG.
    4) Deleted all other imaging programs including camera software, and reinstalled.
    5) Performed HP Update and installed network fix.
    I have performed these steps many times and keep getting the same error.   The scanner works using the front panel function “Scan to network folder.
    Please help.
    This question was solved.
    View Solution.

    First of all, i am sorry to hear your having a problem with your Scanning Feature on your PC. How is the computer and printer connected together?
    Please download and run the following tool. This is what we call the HP Scan Diagnostic Utility.  After downloading and running the tool, can i have you reply with the problems (if any) it finds.  Thanks so much!
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-96509-1&cc=us&dlc=en&lc=en&...=
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an HP Employee.

  • Adobe Customization Wizard XI: setup.ini was not found (while saving the MSI)

    I have downloaded the Adobe Customization Wizard XI and the Adobe Reader XI .msi file. I am only attempting the customize three options of this application. When I try to save the .msi file I get an error "setup.ini was not found".
    I have placed the .msi file in a folder on the desktop. Additionally, I have tried using 7-Zip to extract the .msi in an effort to find the setup.ini file.
    Where is this file located? What is the solution?
    Any help is much appreciated.

    Just install Adobe Reader on a machine.  Then you will get the flat files in a folder location that has the Setup.ini file.  It will be something like this depending on your OS:
    Windows 7 64-bit Example Location
    C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AB0000000001}\

  • Adobe acrobat pro 8 does not recognize scanner

    adobe acrobat pro 8 does not recognize scanner

    This question will probably get responses most quickly if posted in Adobe's own forums, since it's about an Adobe product and not the iMac itself.
    http://forums.adobe.com/community/acrobat
    Regards.

  • Error code: 0x80070035 The network path was not found

    "Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
    The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
    Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".  
    Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
    So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
    DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
    All strarted and running in Automactic mode.
    Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
    Someone please help !

    Hi,
    In addition, I would like to suggest the following:
    Enable NetBIOS over TCP/IP:
    1.    Go to “Control Panel\Network and Internet\Network Connections”.
    2.    Right-Click on the connection and choose Properties.
    3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
    4.    Click Properties, and then click Advanced.
    5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
    6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
    Thanks.
    Nicholas Li - MSFT

  • QTCF.DLL was not found

    I have installed CS4 on a 32 bit WinXP machine so we can use Premier Pro.  I have used a customised set up and just installed Premier Pro for CS4 as we use CS5.5 for Photoshop, Illustrator, etc.  Install seems to proceed with out error but when I launch Premier Pro CS4 I get an error message twice - QTCF.DLL was not found - then Premier Pro launches.  I believe this is a  Quicktime error, but I have v 7.08 installed  and this seems to work fine independently of Premier Pro.
    Has anyone come across this ?
    D Steadman

    John T.,
    I think that you are correct, unless one had a dual-boot configuration, as QT Player updates will overwrite the QT Player files, and also update the OS.
    When having to roll-back QT Player, I have gotten the error "You already have a later version of QT Player installed," or similar syntax. In those instances, I just Uninstalled the later (faulting) version, then Installed the older (non-faulting) version.
    Now, I wait until I see glowing reports on the Adobe Forums, before I update my QT Player, due to so many updates, that mucked up my Adobe programs.
    Good luck to the OP, and glad that they finally got the post, where it belonged.
    Hunt

  • Could not complete this operation the. File was not found.

    I am running Illustrator CS6 on a Mac version 10.9.1. My problem is that when I try to "Save for Web" I get an error message of:
    "Could not complete this operation the. File was not found."
    What is it even talking about?!? It can save it normally, but not as a .jpg, .png, etc.
    I just restarted the program (but this isn't the first time I received this error). Now it says something new:
    Some names of the files being saved contain non-Latic characters. These file names will be incompatible with some Web browsers and servers.
    I simply named the file "6.png"
    That time it did allow me to save though. What is going on!??

    +1
    I am getting the same error message for "Save for Web" on Adobe Illustrator CS6 on my Macbook Pro Version 10.10
    "Could not complete this operation the. File was not found."
    Frustrating

  • Premiere claims Media Cache directory was not found or is not writable.

    Premiere claims Media Cache directory was not found or is not writable. I then change the cache settings to an external drive then it crashes regardless of whether I open an existing file or create a new one. I've re-installed, deleted preferences etc. Often when it doesn't crash, it will say file was created in a newer version of Premiere Pro. Losing hair, please help?

    Okay! So, immediately after my last post, I solved the problem.
    I deleted the cache files in the default directory "C:\Users\"USERNAME"\AppData\Roaming\Adobe\Common"  then this stopped the crashing.
    There appears to have been updates via Creative Cloud so this must've caused dramas with the existing project files. So a fresh install + the deleting of the cache files, then the changed settings of Media cache locations seems to help.
    Thanks for those who tried to help!
    Cheers,
    Tom

  • Soundbooth CS3 failed to start -preminfo.dll was not found

    Soundbooth CS3 starts with error - This application has failed to start becase preminfo.dll was not found.
    Vista x64 SP1
    Adobe CS3 production premium ultra
    Reinstall Soundbooth CS3 das not help. Premiere Pro CS3 works fine.
    Tank You.

    C:\Program Files\Adobe\Common\Plug-ins\CS3\MediaCore
    Production Premium apps (PPro, SB, AE, Encore) will try to load plugins placed in the above folder. This is good and bad. It's good because you place them in one location and they are shared. It's bad because if the plugin was written specifically for peremiere, it may not work correctly in Soundbooth.
    C:\Program Files\Adobe\Adobe Premiere Pro CS3\Plug-ins\..
    Plugins placed in the premiere folder only get loaded in to premiere.
    Usually plugin manufacturer decides where they should go and you shouldn't have to worry about it. I recommend not moving them around unless there is a problem with them.

  • I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That's all we know. in English

    I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That’s all we know. in English

    Bookmark and use this;
    Download the '''[https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
    This add-on is very simple: on installation, it backs up
    and then resets your search preferences and home page
    to their default values, and then uninstalls itself. This
    affects the search bar, URL bar searches, and the home page.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found

    Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found? How do I fix this? I've re-installed and the auto updater has run...I even downloaded and ran the patcher application? By the way Bridge CS3 doesn't show up in the CS3 program list in the start menu but it is installed in my program files - I've tried launching it directly from there as well. Bridge CS2 is operating just fine.
    Update: I installed and ran the Adobe Support Advisor, resulting in - Issues: "The module found no solutions to report for the selected log file."
    I tried to package the report and the error read: "The size of the package is too large to be handled with the current configuration! Please contact Adobe Support for additional information."
    I opened a web based report/case number at the Adobe Support Portal about the missing Symlib.dll (including the Adobe Support Advisor error). Their response was: We regret to inform you that complimentary support for your product is not available and/or has expired.

    Did Bridge work before? If so, reset preferences by holding down the Ctrl key when starting Bridge. If successful you will get a Reset Window, choose all 3 options.

Maybe you are looking for