Adobe X - "Search highlights from external highlight server" no longer exists

We have a document management system that highlights search text on PDF documents from an external hit highlighting server.
The current version of adobe X does not seem to support this. This was a very good feature in adobe for the document management industry. Can we please get to know why this feature was disabled ?
Also, Is there a way by any chance that we can enable this feature ? if not does Adobe have any plans to restore this feature in the next release.
Please respond.
Thanks
Bhaskar

The final post in the following topic gives some reasons it was discontinued: http://forums.adobe.com/message/3286586
You can't enable it for version 10 viewers. As for the future, who knows? Not dtSearch: http://support.dtsearch.com/dts0152.htm

Similar Messages

Attach doc from external content server- using Generic Object Service (GOS)

Dear All,
i have intergrated an external content server to SAP using SAP archive link. All the scanned document are there in Content server and corresponding entries are done in SAP.I can search and view document using tcode : OAAD
Please tell me steps for "how to attach a document from external content server using Generic Object Service "
Scenario is : For example when we change any Master records or create a new PO, or do some financial transaction then i need to attach the supporting document which is there in my content server connected to SAP.how do we manual attach a Document in SAP using GOS.
Do we need to do some special configuration to use GOS .please give the steps from initial.
Thanks
sandeep

Hello,
Check your configuration of document type assignement to required business document - object type, Archivelink table, content repository in OAC3 transaction.
Goto respective business document > Click on GOS > Create > Store business document - Here you can see defined document type with desctiption. Double click on this the assign your document to this business document. Save it.
This will help in attaching the document to your required business document.
To verify you can check the archivelink table or by transaction OAAD.
Hope this will help you.
-Thanks,
Ajay

An error occurred while searching tasks from the SOA Server

While clicking task tab in self service page i am getting
"An error occurred while searching tasks from the SOA Server." even after sao server is up.

http://host1:8001/soa-infra/ is down
I restarted soa server and found the soa changed to Running status after the below error in console
Nov 16, 2011 12:06:21 PM GMT+05:30> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_ANNOUNCE)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:38)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
Truncated. see log file for complete stacktrace
I checked OIM log also after clicking the task tab and found below error in log
Error occurred while connecting to BPEL
[2011-11-16T14:59:02.703+05:30] [oim_server1] [ERROR] [] [oracle.iam.tasklist.agentry.task] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: bb6ba2093960fbcc:-2164bc25:133aba77382:-8000-00000000000000a4,0] [APP: oim#11.1.1.3.0] javax.naming.NameNotFoundException: Unable to resolve 'TaskQueryService'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TaskQueryService'. Resolved '']; remaining name 'TaskQueryService'
[2011-11-16T14:59:02.703+05:30] [oim_server1] [WARNING] [] [oracle.iam.consoles.faces.mvc.common] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: bb6ba2093960fbcc:-2164bc25:133aba77382:-8000-00000000000000a4,0] [APP: oim#11.1.1.3.0] oracle.iam.platform.canonic.base.NoteException: An error occurred while searching tasks from the SOA Server.

Cannot modify Data Connection in Infopath form as the original webservice server no longer exists

Hi,
I am going to modify one of the data connections in my infopath form, but it throws me an error. The original server no longer exists. I know that I can change the manifest.xsf and replace the old server with the new server name. And when I pulled up the
Data Connections list, I can see all the connection sources have been changed to the new server. But I am still getting this error:
Could not open "http://<oldeserver>/<webservices.asmx>?WSLD
I don't seems to see a reference to the webservices.asmx, where will that be?
Please advice. Your help would be greatly appreciated!
Where is this reference came from?

I think I found out where the reference is, it is actually in the udcx file. It is weird though, the one on Central admin has been updated with the new server name, but not the one in the local data connection library, and it is actually referencing the
local data connection library instead of the one in Central Admin.
Thanks.

How to send XML packet from external socket server to OSB

Hi folks,
How do I use external Socket Server(tcp) to send payload to OSB ?
I have configured the socket protocol in my OSB. I am also able to send and receive responses by testing my proxy services from OSB itself.
But now, we want to use some external socket (tcp)server to be able to fire some xml file and then receive response on OSB.
Please help
salil

You need to use a socket client application to send a message to a socket where your proxy is listening. For receiving a message at a socket, configure business service at OSB.
Regards,
Anuj

I am running Mac OSx Lion 10.7.2. My problem is I can't search on an external network server for a file with the finder toolbar anymore. Nothing shows up and it will not search. I was able to in snow-leopard and am no longer able to w. Lion. Suggestions?

I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

WLC WLAN Authentication from External RADIUS Server

Dears,
How to make WLC Receive PoD (Packet of Disconnect) from the RADIUS server to terminate the session and disconnect authenticating clients.
Thanks,

Hi Ahmed,
Its not documented well, but here is it:
CSCso52532 No Documentation for sending RADIUS Disconnect-Request (RFC 3576)
. If a user has to be logged out then, following attributes are expected
- SSH_RADIUS_AVP_SERVICE_TYPE(6) attribte with following value.
         SSH_RADIUS_SERVICE_TYPE_LOGIN(1)
       - SSH_RADIUS_AVP_CALLING_STATION_ID(31) - this is needed, if
              we want to delete particular user session via particular device
              (like PDA, Phone or PC)
       - SSH_RADIUS_AVP_USER_NAME(1)
. If a management user has to be logged out then, following attributes
are expected
- SSH_RADIUS_AVP_SERVICE_TYPE(6) attribte with following value
- SSH_RADIUS_SERVICE_TYPE_ADMINISTRATIVE
                      OR
   - SSH_RADIUS_SERVICE_TYPE_NAS_PROMPT
   - SSH_RADIUS_AVP_USER_NAME(1)
   - SSH_RADIUS_AVP_FRAMED_IP_ADDRESS(8)
Eg:
*Dec 17 12:59:08.926:   Packet contains 14 AVPs:
*Dec 17 12:59:08.926:       AVP[01] User-Name................................user@domain (17 bytes)
*Dec 17 12:59:08.926:       AVP[02] Nas-Port.................................0x0000000d (13) (4 bytes)
*Dec 17 12:59:08.926:       AVP[03] Nas-Ip-Address...........................0x0a0047fb (167790587) (4 bytes)
*Dec 17 12:59:08.926:       AVP[04] Framed-IP-Address........................0x0a003f1b (167788315) (4 bytes)
*Dec 17 12:59:08.926:       AVP[05] NAS-Identifier...........................wlcRM_1 (7 bytes)
*Dec 17 12:59:08.926:       AVP[06] Airespace / WLAN-Identifier..............0x00000004 (4) (4 bytes)
*Dec 17 12:59:08.926:       AVP[07] Acct-Session-Id..........................4b2a1d0c/00:1c:26:cb:27:71/4 (28 bytes)
*Dec 17 12:59:08.926:       AVP[08] Acct-Authentic...........................0x00000001 (1) (4 bytes)
*Dec 17 12:59:08.926:       AVP[09] Tunnel-Type..............................0x0000000d (13) (4 bytes)
*Dec 17 12:59:08.926:       AVP[10] Tunnel-Medium-Type.......................0x00000006 (6) (4 bytes)
*Dec 17 12:59:08.926:       AVP[11] Tunnel-Group-Id..........................0x3633 (13875) (2 bytes)
*Dec 17 12:59:08.926:       AVP[12] Acct-Status-Type.........................0x00000001 (1) (4 bytes)
*Dec 17 12:59:08.926:       AVP[13] Calling-Station-Id.......................10.0.63.27 (10 bytes)
*Dec 17 12:59:08.926:       AVP[14] Called-Station-Id........................10.0.71.251 (11 bytes)
*Dec 17 12:59:10.943: 00:1c:26:cb:27:71 Accounting-Response received from RADIUS server 10.0.71.249 for mobile 00:1c:26:cb:27:71 receiveId = 0
*Dec 17 12:59:34.044: Received a 'RFC-3576 Disconnect-Request' from 10.0.71.249
*Dec 17 12:59:34.044:   Packet contains 6 AVPs:
*Dec 17 12:59:34.044:       AVP[01] Nas-Ip-Address...........................0x0a0047fb (167790587) (4 bytes)
*Dec 17 12:59:34.044:       AVP[02] User-Name................................user@domain (17 bytes)
*Dec 17 12:59:34.044:       AVP[03] Acct-Session-Id..........................4b2a1d0c/00:1c:26:cb:27:71/4 (28 bytes)
*Dec 17 12:59:34.044:       AVP[04] Calling-Station-Id.......................10.0.63.27 (10 bytes)
*Dec 17 12:59:34.044:       AVP[05] Called-Station-Id........................10.0.71.251 (11 bytes)
*Dec 17 12:59:34.044:       AVP[06] Service-Type.............................0x00000001 (1) (4 bytes)
*Dec 17 12:59:34.044: Error cause 503 generated for 'RFC-3576 Disconnect-Request' from 10.0.71.249 (Session Identification attributes not valid)
*Dec 17 12:59:34.045: Sent a 'RFC-3576 Disconnect-Nak' to 10.0.71.249:3799
*Dec 17 12:59:36.561: ****Enter processIncomingMessages: response code=5
**Share your knowledge. It’s a way to achieve immortality.
--Dalai Lama**
Please Rate if helpful.
Regards
Ed

Create a Playlist from external folder with tracks already existing in iTunes

I was just wondering if its possible to create a playlist from an external folder (on my desktop) with tracks that already exist in iTunes.
I basically have a folder on my desktop that i use with Serato, i was wondering if it'd be possible to sort a playlist in iTunes with the tracklist from the folder? I already have all the tracks on iTunes so i don't want to add them onto iTunes again just to put them into a playlist as i'd have to sort through all the duplicates to delete the non playlisted tracks (theres around 1500 so it wouldn't be a quick task).
Would be much appreciated if anybody can help!

Hi,
I have an AppleScript that does this.
This script need Spotlight metadata, all files in the folder that you use with Serato should be indexed.
Works well if the tags (name and artist) are defined
In this script :
it will display a dialog to select your folder
iTunes search track from the library playlist according to (artist, album and title in the Spotlight metadata of each file).
If iTunes found a track, iTunes will add this track to the new playlist.
The script takes 35 seconds for 1000 files on an old machine (PowerMac G5 2 X 1.8 GHz) .
This should take less than 100 seconds for 3500 files on the new machine
Here is the script :
-- this script need Spotlight metadata, files in the folder should be indexed
set folderPath to (choose folder with prompt "Select the folder that you use with Serato")
set f to quoted form of POSIX path of folderPath
my makePlaylist(do shell script "/usr/bin/find " & f & " -type f \\! -name '.*' -print0 | /usr/bin/xargs -0 /usr/bin/mdls -name kMDItemTitle -name kMDItemAlbum -name kMDItemAuthors | /usr/bin/sed 'H;$!d;x;s/\\n[^k]//g'")
on makePlaylist(t)
      script o
            property L : paragraphs of t
      end script
      set tc to (count o's L)
      tell application "iTunes"
            set newPlaylist to make new playlist with properties {name:"Serato"}
            set masterLibr to (get first playlist whose special kind is Music)
      end tell
      repeat with i from 2 to tc by 3
            set {tAlbum, tArtist, tTitle} to my getvalue(items i thru (i + 2) of o's L)
            tell application "iTunes" to try
                  set t to (get first track of masterLibr whose name is tTitle and artist is tArtist and album is tAlbum)
                  duplicate t to newPlaylist -- add founded track from the library playlist to the new playlist
            end try
      end repeat
end makePlaylist
on getvalue(tList)
      set oTID to text item delimiters
      set text item delimiters to "\""
      set {alb, aut, title} to {"", "", ""}
      try
            repeat with i in tList -- if line does not contains a double quote then the tag is empty --> = (null)
                  if i starts with "kMDItemAlbum" then
                        tell i to if it contains "\"" then set alb to text item 2
                  else if i starts with "kMDItemAuthors" then
                        set text item delimiters to "(   "
                        -- if artist contains one word, it doesn't contains double quote
                        tell i to if it does not contain "(null)" then
                              if last text item starts with "\"" then
                                    set aut to text 2 thru -2 of (last text item)
                              else
                                    set aut to (last text item)
                              end if
                        end if
                        set text item delimiters to "\""
                  else --kMDItemTitle
                        tell i to if it contains "\"" then set title to text item 2
                  end if
            end repeat
      end try
      set text item delimiters to oTID
      return {alb, aut, title}
end getvalue

How do I authorize itunes music using an old apple id from an email that no longer exists?

I have a lot of music in my itunes that is linked to my old apple id account from an old computer. I no longer have this computer or the email account. The email I used no longer exists (so I can't receive the recovery emails) and I completely forgot the security question answers. Is there ANY way I can fix this??

Not on your own. Click here or here and contact Apple.
(119503)

Download email from External Postfix Server to Leopard Mail Server?

Any pointers to specific articles, much appreciated.
We presently have our website and mail servers (postfix) hosted on surftown, which has squirrelmail for webmail.
We do not have a static IP and use dyndns.
The domain on surftown is xxxx.com
We also run an intranet with a couple of Leopard Servers behind a VPN,with our own local DNS on intranet.xxxx.com
I would like to take the emailserver inside the VPN and onto a Leopard Server, but leave the website on surftown.
Is it possible to have postfix on a Leopard Server log onto the postfix server at surftown and draw the email off?
Users would then access their email via the Leopard Server.
If they are in the office LAN or in a satellite office connected VPN, then they will use POP/IMAP within Mail.
If they are outside the VPN they can use Webmail via a logon with a Netgear SSL312.
Does anyone have any experience of using the Leopard Server postfix to tap an external postfix service? It would certainly be cheaper than paying DynDNS to do a mailhop and trap.

Look for discussions of [imapsync|http://freshmeat.net/projects/imapsync> as one potential starting point for your quest and as keyword fodder for your searches.
This is usually one of two general classes of problem. Presuming this is a technical limitation out at your ISP (eg: they don't "do" static addresses) and not a budget-targetting effort (implying that you probably won't want to spend on a tunnel), setting up an IPv6 tunnel over IPv4 might be an alternative.

Switching from external Email server to Exchange, Understanding Dis-Joint, and a little help please

I'm pretty new at installing exchange myself and have never done Exchange 2013
While going through the install help online I came across disjointed domains. I think I'm over thinking this but here is what I have and what I want to do. Any other tips would be great as well.
Customer currently has a domain, internal dns and email through GoDaddy. Lets call it smallschool.com
Internally they have a new Active Directory (2012) and the domain is in.smallschool.com. There is no external DNS except GoDaddy. I plan to use that (if that's ok).
I have built a Hyper-V for Exchange 2013 and have installed pre-requisites.
My Current Question are...
Do I need to set up dis-joint dns suffix and modify the msds-allowdnssuffix attribute? I have the instructions, I just don't know if this is a must or not with the domain names like they are.
Am I going to run into any trouble switching GoDaddy's email to Exchange Server? Any Tips?
Thank You,
fixitrod

Hi fixitrod,
Agree with Ed Crowley. If your original used domain is smallschool.com in GoDaddy, I suppose your email address would be
[email protected]
If that is the case, when you deployed a new AD domain with in.smallschool.com, we can create an accepted domain for smallschool.com in Exchange 2013. If you want to still use Godaddy for external message sending and receiving, you can create an external
relay domain. For more information about configuring external relay fomain, please refer to:
http://technet.microsoft.com/en-us/library/jj657491(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support

Passing message text from external RFC server into SAP EXCEPTION parameter

In function module CREDIT_CARD_SETTLEMENT the following DYNAMIC function module call exists:
------ Send items for settlement to a RFC function -------------------
    CALL FUNCTION l_fnset
         DESTINATION l_rfcset
         EXPORTING   i_ccseth                = i_ccseth
         TABLES      t_settab                = t_settab
                     t_setexd_h              = t_setexd_h
                     t_setexd_i              = t_setexd_i
         EXCEPTIONS system_failure          = 01 MESSAGE rfc_msg_text
                     communication_failure   = 02 MESSAGE rfc_msg_text
                     call_function_not_found = 03.
This is the code which calls an external credit card application server. I'm trying to figure out how, on the server side, I can return a message into the rfc_msg_text variable on the system_failure or communication_failure EXCEPTIONS.
Ive found several examples of this construct in ABAP code in the SAP side but I cant for the life of me find anything that shows how to set this up in our external server.
There are several SAP function modules like RFC_PING that have similar constructs but I cant see the compiled C code to tell what command to use to fill in that text. I can raise the exception, just not fill in the text.
Any ideas?

Hi Eric,
I do not quite understand the problem.
Is there an external NON-SAP system, that needs to do the call?
Within any external SAP system (inside the RFC Function Module) you can raise exceptions in the following manner:
MESSAGE e398(00) WITH par1 par2 par3 par4 RAISING exception_1.
Message 398 in class 00 contains only & & & & as text.
Each & is replaced by par1 through par4.
Suppose par1='Order' par2='1234' par3='invalid' par4=''.
Then a message would be build like: Order 1234 invalid.
This all would reside in the remote called function module.
When you call this module and after any exception in the call the addition MESSAGE rfc_msg_txt was put, then the variable rfc_msg_txt='Order 1234 invalid'.
But as already stated before, i'm not quite sure what the problem is. Shed some light to it.
Greetz,
Rob.

Suppress standard Tax procedure for tax returned from external tax server

Hi All,
We are facing an issue after implementing the external tax engine called CTE.
In some scenarios, when CTE is returning reverse charge lines, we are passing the same lines into the BAPI for posting.
Ex: We can clearly see that two reverse charge lines (input and output taxes) being returned by CTE.
Now, we pass the tax lines into the BAPI for posting. We get the following:
We can clearly see that apart from the tax lines which have been sent by CTE, we also get two additional lines having +-1000 as amount.
Now, we tried to post the document without passing the tax lines into BAPI and we get,
The additional lines are still there. Thus, I came to the conclusion that these tax lines are being added by SAP standard tax procedure as tax calculation.
Now, since we have already calculated tax using CTE (for some cases specially reverse charge scenario), we do not need SAP standard tax procedure to calculate tax again and add new tax lines to the posted document.
Thus, our main objective is to suppress the standard tax procedure ( like TAXAT, TAXGB, etc) or few of the cases.
We tried to analyze from our end but still could not reach a solution for the same.
Is there any way or any indicator which you can use to suppress the standard tax procedure in case we are using CTE to calculate tax?
Please help.
Regards,
Saurabh.

Hi
You can create and use a new tax code which is applicable only for Delivery charge cases.
Use a new pricing condition type for this Tax .and condition records with access sequence and tax code can be amintianed only for this condition type.
You will have to modify pricing procedure for the same.
Depending on condition records and document inputs the tax values for delivery will get triggered.
You can also put an order reason in Accounting determination access sequence through which on This special sales ,
account determiantion can be changed.
hope this helps
Regards
Mandar

ENRICH_ITEM_DATA + create Shopping Cart from external Business Server Page

Dear SRM Gurus,
I am on SRM 2.0 with EBP 3.5 and Requisite 3.5/88.
On the Web Interface I get the message (German):
"Sachkonto 6610005 ist nicht angelegt (Bitte Eingabe prüfen) (Position 1) "
which means translated: G/L Account No 6610005 not available - please check your entry (position1).
I don't even find the Message Class which holds the message - It's not under package BBP_PU. In fact, when logging on in English - still the message is displayed German, while the messages in message class of package BBP_PU are translated.
In fact, I think, I am almost done - all required fields are accessible in ABAP - I just don't know, when to put what where...
thanx in advance, matthias
Message was edited by: Matthias Kasig
Message was edited by: Matthias Kasig
Message was edited by: Matthias Kasig

Hi CChung,
I've got a pdf "Open Catalog Interface" which also gives an html example - i can email you.
But let me tell you how I did it.
1. You define a catalog in SPRO for your BSP. SPRO -- general settings -- Enterprise Buyer -- define catalogs
there you place a parameter HOOK_URL as return URL. I guess that is what you already did.
2. Now it's really simple. When you jump to your BSP the HOOK_URL gets also transferred to your BSP. You just have to set up the page attribute 'HOOK_URL' as string auto-value (don't forget to check auto), and then you should be able to deal with its value the way you want.
In my case I transfer the value to a second result.htm.
I set up an htmlb:form which includes an invisible input field:
<htmlb:inputField id       = "I01"
                          value    = "<%= HOOK_URL %>"
                          disabled = "X"
                          visible = "FALSE"
                          width    = "550" />
I guess a hidden field will do to.
In Event Handler OnInputProcessing I refer to this via:
DATA: data_t TYPE REF TO cl_htmlb_inputfield.
IF event->id = 'B01' AND event->event_type = 'click'.
data_t ?= cl_htmlb_manager=>get_data(
                              request = runtime->server->request
                              name     = 'inputField'
                              id       = 'I01'
IF NOT data_t IS INITIAL.
    hook_url = data_t->value.
ENDIF.
and:
navigation->set_parameter( name = 'HOOK_URL' value = hook_url ).
or I use it for aborting in JavaScript like this:
      <script language="JavaScript" type="text/javascript">
      
       </script>
Hope you get it, regards, Matthias

Removing a Certificate Authority from a domain when the physical server no longer exists

So I have two certificate authorities in a domain that I inherited that were set up on servers that have been taken out of service years ago, so I am not able to do the proper CA uninstall. I get constant errors on my DCs referencing certificate autoenrollement
errors associated with these non-existent CAs (listed below). What is the proper way to remove these CAs from AD and how can I be sure that no certificates they generated are used? I see that the certs in the DC stores generated by the
CAs in question all expired last year, and that hasn't seemed to have caused a problem.
DC errors referencing abandoned CAs:
Event ID 6: Automatic certificate enrollment failed, the RPC Server is Unavailable
Event ID 13: Certificate enrollment for Local system failed to enroll for a DomainController certificate with request ID N/A from OLDCA
Event ID 82: Certificate enrollment for Local system failed in authentication to all urls for enrollment server associated with policy id: {GUID} (The RPC server is unavailable. 0x800706ba (WIN32: 1722)). Failed to enroll for template: DomainController

There is no definitive way to know for sure, but you could do a little checking. If the there is no valid CRL (expired or none existent) then most likely all of the certificates in the environment are unusable. You can use this command to view the CRLs in
AD. Replaced the DC=XXX with your AD distinguished name.
Certutil -viewstore "ldap:///CN=CAName,CN=MachineName,CN=CDP,CN=Public Key Services,CN=Services,CN=Configuration,DC=XXX,DC=XXX?certificateRevocationList?base?objectClass=cRLDistributionPoint"
Also, if you are still uncertain, you can remove the objects from the Enrollment Services container (CN=Configuration,CN=Services,CN=Public Key Services). That will make it appear that there is no CA available and the enrollment messages will go away you
are seeing. But anything else that may or may not be using a certificate will be unaffected.
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Adobe X - "Search highlights from external highlight server" no longer exists

Similar Messages

Maybe you are looking for