Adobe X Standard conflicts with multiple scanners?

If I add a second scanner to my home network, will the Adobe X Standard software create a conflict when it sees the two devices? I will be just scanning one document at a time.

No problem with multiple scanners. If they are supported scanners you will have a choice. If you install an unsupported scanner it will be ignored.

Similar Messages

Adobe Air 3 conflict with 10.7.2

I cannot open YNAB and after several tries I get a msg to install the latest Adobe Air. I tried installing it (which is Adobe Air 3) and nothing happens....
Any advice?

I can't speak to the specific problem with YNAB, but since upgrading my MacBook Pro (2010) to 10.7.2, I too have had problems with installing Adobe AIR 3. If you have a MacBook Pro or other Mac with automatic graphics switching, disabling this in System Prefs -> Energy Saver seems to allow Adobe AIR 3 to install. (I too found this tip on the Adobe forums, and I have confirmed that it works.)
Why this should upset AIR is anyone's guess. But then, Adobe creates nasty bits of software that seem to be completely unable to play nicely; they aren't content to use the standard Mac OS X Installer, they dump files and folders in inappropriate places, they have un-Mac-like UIs which make them unnecessarily difficult to start using, and they cause all sorts of system problems. On one occasion I installed Reader in OS X 10.5 because of a PDF with interactive forms. I spent the whole afternoon restoring my Mac from a TM backup as a result of the constant kernel panics which ensued. I almost wish Adobe didn't make software for the Mac.

Printing Standard TEXT with multiple paragraphs in smartform

Hello all,
I have a requirement that, there is a very long standard text stored in a notification of an order in SAP ISU system. The text contains multiple paragraphs with indentations. I want to print this text directly into the smartform WITH SAME INDENTATION AND PARAGRAPH FORMATTING.
First i am reading the entire text using FM READ_TEXT.
My first problem is even if i read the text into a variable of type STRING , it just prints 255 characters of it.
And secondly if i try to printout it using LOOP AT node in smartforms, it prints the entire content but without any formatting .
Please let me know whether it is possible to print standard text in smartforms or not
Thanks
Nilesh Puranik

Hey ,
Well thanks for that but my replies got posted 2-3 times unknowingly, could'nt help it.
Coming to the problem, i guess you did not get my point when i say dynamic texts for each service order.
In my Report i am using LOOP AT ITAB ..where in itab i am storing a service order no i.e. ITAB-ORDER_NO
Now for every order there is standard text maintained in SO10 starting with order name
so my code goes like this.
LOOP AT ITAB.
CALL FUNCTION 'READ_TEXT'
EXPORTING
 ID = 'LTXT'
 LANGUAGE = 'E'
 NAME = ITAB-order_no
 OBJECT = 'QMSM'
TABLES
 LINES = LINES .
CALL <SMART FORM Fm>
ENDLOOP.
Hence whatever Standard text maintained for that service order i want to display it as it is in the smartform with same paragraphs formatting and indentation.
IF i use a variable in smartform and pass the entire text after using READ_TEXT , it does not format the text and it just prints only 255 characters even if i define it of type STRING .
Hence i am stuck in this scenario.
Appreciate ur help though.
Thanks
Nilesh

Cause conflicts with multiples platforms?

Have been using LR for a while and enjoy most of it but then thought I might
check out with other programs have to offer like ACD See. Think I have tried
others in the past, but they didn't grab me. Anyhow, this question isn't
about what is better, but rather, will or could there be issues by having
multiple photo management programs on my machine and have them linking to
the same images and such? I mean, the databases of the programs will stand
on their own and therefore I thought it shouldn't, but then maybe it would
be best to get some insight here? Thanks much for any insight you can
provide!

No...no "conflicts" but I would question the value of doing so...as it stands, right now only Camera Raw and Bridge CS3 can really "work together" for anything other than just metadata. Meaning only Lightroom & Camera Raw 4 (and I suppose CR 3.7 in CS2) can show images with the correct renderings based on image settings.
So adding other DAMs into the mix will not really help, it may only confuse the issues.
I would argue also that having multiple DAMs will, in effect mean you may not master any of them. I mean although Lightroom is supposed to be easy to learn, it still take time & effort it to really be good at it. And other programs will also require time & effort to become good at using them. Splitting your time for anything other than testings would be, I think, a waste...

Adobe Edge Runtime conflicting with Wordpress menu

I finally managed to manually insert an Adobe Edge animation thanks to vivekuma and also by following this article. It seems I needed to change several paths in edgePreload.js and edge.js.
I am however facing a new problem... I created both a page and a header templates to load from the page so I can insert the  content in the page with the animation only. I pasted the code just between <?php wp_head(); ?> and </head> tags. This loads the animation correctly, BUT it breaks the site's menu (it has a jquery effect) and a slideshow.
Is there a better way to run this script or to find out what's causing the conflict?

Hi, resdesign!
These tips will help us a lot in files that we thought were lost forever!
Most of all, why does it happen? I understood that it is an action.js closure problem in many cases.
But this occurs because changes were made outside Edge Animate while the file *.an was open?
We need to find the reason why we are making a wrong use of the software.
Thank you very much indeed.

Cannot install Adobe Acrobat Standard XI with License Code

I had a trial version of Adobe Acrobat Pro XI installed until I received my Standard License Code. I uninstalled the trial, and am trying to install the standard XI version. However, when running AcrobatStd_11_Web_WWMUI.exe file to install standard, the Installation still says Pro, and it will not accept my Standard License. Is there a registry entry blocking Standard, or what do I have to do to get Adobe Acrobat XI Standard installed?

Hi wcoffey.truehomes
It seems when you extracted the setup for the Acrobat standard XI , normally the setup gets extracted on desktop by default and that might have got mixed with previous extration of setup of Acrobat XI pro . You can try to extract the setup again which you might have downloaded recently in different location and meanwhile to try to check if you have already Copy of Acrobat installed on the Computer . Try uninstall and restart the computer. After restart try install again.

Adobe Pro 11 conflict with Adobe reader on Firefox

I downloaded adobe acrobat pro 11 trial version and also have adobe reader on my Windows 7. I get error only on firefox when trying to open the pdf attachment stating "there was an error opening this document. The file is damaged and could not be repaired".
The pdf attachment works fine with Chrome, or when attaching to an outlook email.
Is there a fix, or should I just uninstall the adobe acrobat pro trial??

Are you using the Adobe Reader plugin, or Firefox' own PDF viewer?
Are you using the Adobe Reader plugin, or Chrome's own PDF viewer?
Also, what is your installed Reader version?
See http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Im having problems with my Kids facetime accounts that seem to be because they are both using my itunes and there are conflicts with multiple email addresses? Is it possible to now set the kids up with their own accounts without losing their apps etc

Hi All,
I have my kids using iTunes via thier ipods etc through my own account and this hase been the case for some time?
This has started to cause issues lately with imessaging and facetime, as there seems to be a limit on email addresses that can be associated with one account?
I wonder if I would be best off setting the kids up with their own accounts, but want to be able to do this without them losing their existing apps, music etc?
Is this possible, if so is there a simple process cos I can seem to find anything relating to this?
many thanks, Jim

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Conflicts with multiple VIs

Hi, we have a setup where we would like 2 VIs to read from a common high speed ADC. The first VI is a "housekeeping" VI which monitors a few channels on the ADC, mostly monitoring temp and pressure in a dewar. The second VI sends commands to an outside box to have it change the input to one of the ADC channels, and then records the voltage from that channel. Actually, for every cycle we record four different values in succession and write it to file. The problem is when we increase the rate (say to 1-5 seconds per data point) at which the "housekeeping" VI acquires data the second vi does not work correctly. Is there something in LV that can make these two (and maybe three) VIs not conflict when accessing the ADC? Please note that I am
new to LV programming, my apologies if this question should be directed to another category. Thanks for any insight!
Anil

Without doing a lot of work, synchronizing communication to the same piece of hardware from different and independant VIs (or any other software for that matter) is next to impossible. It would be far easier to have a single VI that acquires all channels and then pass the data to different VIs that display what you want. You could do this a lot of different ways. The dispaly VIs could be subVIs of the the main VI that does all of the acquisition or the main VI could de a Datasocket server and your display VIs are Datasocket clients.

Adobe Acrobat Standard XI - Activation problem

Hello,
I have an adobe acrobat standard XI, with an enterprise activation. When I try to convert a Word document to PDF, it asks me a license key. But if I try to edit a pdf file, it doesn't ask me a license key.
What can I do?

Try this KB document:
Serial dialog box appears | Printing | Version 11.0.01

Fi-5220c with Adobe X standard scans multiple pages with first page garbled. Pls can anyone help? MK

My fi-5220c scanner which i use with Adobe Acrobat Standard X does scans with garbled first page. What am i doing wrong? I use custom scan option. thanks MK

Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

Will Adobe Acrobat 8.0 Standard Work With Adobe Reader 8.2.4?

Hello,
I have a question, but haven't found an answer to this yet.
Can anyone tell me please: Will Adobe Acrobat 8.0 Standard work with Adobe Reader 8.2.4?
I had Adobe Acrobat 6.0 Standard on my computer & it was working with Adobe Reader 8, but don't remember what the version it was.
I was using Adobe Acrobat 6.0 Standard to scan very old family pictures & documents & I realize that this version of Acrobat is outdated.
To make a long story short, my computer had crashed, so we built another computer & just replaced the hard drive. When I went to Adobe, I had to download the newer version of Reader 9.0 & it didn't work with Acrobat 6.0., so I removed Adobe Reader 9 & I found Adobe Reader 8.0 & have downloaded the patches, so now I have Adobe Reader 8.2.4 back on board.
Thank you.

Adobe doesn't recommend any version of Reader with any version of Acrobat on Windows. It will cause problems. It just is a matter of how and when. The problem has to do with shared resources causing conflicts. If you have Acrobat 8, you can update it to Acrobat 8.2.4. You must apply the updates sequentially.
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

How do I customize Adobe Acrobat Standard DC or Adobe Acrobat Pro DC to do what I'd like? Actually this a multiple-question inquiry.

Note, I was unable to find a "How TO", Tutorial, or FAQ relevant to the following questions.
For instance, how do I easily append to an existing PDF with minimum clicks (which I could do with an earlier version of Acrobat Standard)?
I'm using a 30-day trial of Adobe Acrobat Pro DC to scan documents and in certain situations, append to existing PDFs.
I'd prefer to trial the Adobe Acrobat Standard vs. Pro DC because that's what I intend to purchase. I'd prefer to not get accustomed to Pro if Standard is very different.
1. After selecting Edit > Preferences and specifying certain defaults, most take effect as suspected but some do not, like the one's I'm going to elaborate on below. Why?
2. Alternatively, is there a Tool or a way to create a local customized Profile and default to that Profile to avoid having to repeat the following steps?
   This should not be confused with the online Profile (or Communities Profile) whereby one states one's Name etc.
File
> Create
   > PDF from scanner
     > Custom scan
       > Color Mode: Black and White
       > Append to existing file
         > Browse
           > Select file
             > Scan
This is a cumbersome task to repeat each time I'm ready to scan. Using an earlier version of Acrobat Standard, I'd simply double-click the PDF I wished to append to,
Acrobat would default to the appropriate scanner, and know that I wished to append to an existing file without me having to select that option. Presently it doesn't appear to be that easy/simple.
Perhaps it is (or can be with guidance). Please assist.
3. Please find attached the following snapshots/images... CORRECTION, IF ADOBE SUPPORT CONTACTS ME ABOUT THIS, I'LL GLADLY FORWARD SCREENSHOTS.
   Meaning, there does not appear to be a way to include screenshots on Forums.
3a See Error. Is there a way to get a more accurate description of the error (i.e., turn on debugging etc.)?
3b When Creating a PDF, the prompts still seen after clicking "Configure Presets" and changing Color Mode from AutoDetect to Black and White. Why?
3c Custom Scan Input, where I changed Color Mode from AutoDetect to Black and White and why I must also tell Acrobat to append AND to browse to a pre-defined default location?
4. Must I be "Logged in" to use the product? The first time launching it, I was prompted to login using the credentials used to create the account and download the product. Now when using the product it appears to be automatically "Logged in" or online. I would prefer to use it in an "offline mode" if there is such a thing.
5. Once the product is purchased, what are my support options? Can questions be answered or issues resolved with a phone call or are they limited to the Acrobat Forum(s) and/or Adobe Communities? Even after clicking "Ready to contact us? Start here." I'm only given the Forum option (over and over) vs. Chat vs. Email Support etc.
If I've posted these inquiries to the wrong Forum or Discussion, if prudent, please collectively relocate them. Regardless, please advise. Thanks!

uninstall all acrobat/reader versions and retry installing.
or check your log files for more specific help, Troubleshoot install issues with log files | CS5, CS5.5, CS6

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Adobe X Standard conflicts with multiple scanners?

Similar Messages

Maybe you are looking for