Adobe XI Pro 3rd Party Plugin not working

I copied my 3rd party plug-in to the plug_ins folder like I've done in the past for Adobe 9 and 10 with no issue after upgrading. With Adobe XI, my plug-in doesn't show up. Any ideas?

Are these plugins based on an older Acrobat SDK which based on ADM? If this is the case, you need to re-build them all without this environment; ADM has been completely removed from AXI and RXI.
Feel free to post for more information.
~Sandeep V.

Similar Messages

Quick look 3rd party plugins not working

The 3rd party plugins not working. Illustrator, Folder view, and quark are the three I use. They worked nice in 10.5.x Tried /Library/quicklook/ tried /user/library/quicklook/ even forced into system/library/quicklook/
Anybody else use these or any other 3rd party plugin?

I can confirm that Folder View plugin no longer works. the developer discusses it here
http://www.flickr.com/photos/t_trace/2060171212/
but I can't understand if they figured out how to fix it or not.

3rd party plugins not working after archive and install

hi,
i have a few 3rd party plugins in my logic pro, such as all the native instruments, waves diamond, ik multimedia plugins, atmosphere and a few more,
i was getting an error on my g5 when i tried to run diskwarrior from the disk. it was the kernal panic message, it said i had to restart my mac, therefore i couldnt run diskwarrior from disk.
i did a bit of research and a few people suggested doing a archive install, so i did.
well what do you know, i had to re-install logic 8 again. other programmes such as transcribe, itunes idvd imovie etc were ok.
but logic didnt load up, o i had to re-install logic again,
also before i did that i checked to see if my 3rd party plugin were working in standalone, so i check all the native instruments and they seemed to work ok, T-racks deluxe works fine, so i thought they should all load up in logic.
once logic was installed again and had to get all the updates all my 3rd party plugins did not show up on my AU validation.
is there a way to get logic to see my 3rd party plugins or do i have to re-install all of them again.
cheers for the help
lib

Then check if the NI AU components are actually where they should be:
HD/Library/Audio/Plug-Ins/Components
If not copy them over from your "previous systems" folder which was created on your HD during the archive and install process.

MacBook Pro 3rd Party App not loading just 'flashes' 10.8.5

Hi
Could really use some help here, been using this forum for around 6 years and have managed to solve all my Mac problems through it which has been great, but I have an issue I really can't figure out.
Replaced my HD with an SSD using Carbon Copy Cloner and everything has worked perfectly apart from one really annoying problem.
If I unzip a 3rd party App (not .dmg these work ok) for a piece of music software (as that is all I use this Mac for) it just 'flashes' for a second and stops - where as normally it will ask for Password to make changes and install it.
If I use Console to inspect the error I get this…
com.apple.launched.peruser.501:([0x0-044044].com.native-instruments.kExecutableN ame[318]) Job failed to exec(3) for weird reason: 13
Dock: no information back from LS about running process
This is what I have tried.
1. Security and Privacy Settings are set to allow non Apple Apps.
2. I have repaired Permissions in Disc Utility and from Terminal in Recovery HD via resetpassword command.
3. I have opened the app for the Get Info part and I have Read/Write permission on it.
4. I booted in Safe Mode, still the same.
5. I created a new Admin user on my Mac and tried to open the same App after unzipping and it immediately asks for the prompt to enter password to make changes. (so the download/unzip process is ok).
So, I guess it really must have something to do with my permissions somehow (or not!). As this is the only thing that does not work I feel I have narrowed it down but just can't fix it.
Any help/advice will be much appreciated.

Ok
I have fixed this. May be of help to others at some point.
I have been using Zipeg for .zip folders for about 4 years and never had an issue, I saw on a non related post about .zip files and how they can become corrupted during de-compression.
Anyway, I deleted zipeg and re-installed it, still the same, after that I read a post about OSX built in Archive Utility, it wasn't in my Utility folder so another post gave the path. I had no idea it even existed.
System / Library / Core Services - Archive Utility.
Using this all is working perfectly again.

Plugin: 3rd Party applets not working

I have an internally developed applet that requires us to install the Plug-In under our IE 5.5 and 6.0 browsers (about 10,000 of them). Upon doing that, I will now have a handful of 3rd party applications that employ applet technology, and that will not work with the Plugin (lots of classnotfoundexceptions being floated around). The only way that I've found I can make these applets work is to turn off use of the Sun Plugin within IE. I am wondering if this is a plugin, or vendor, problem.
* What is the basic problem here?
* Is it that these other 3rd party system are written to an older spec and the 1.4 plugin will not support them?
* Is Sun's plugin not backward compatible with older applets?
* Did these vendors screw up in some fashion in their applets or HTML?
* Is the whole idea of applets inherently flawed?
What are other folks doing to get around these incompatibilities?

I don't your exact problem with the ClassNotFoundExceptions, but it may be because those applets are using Microsoft specific APIs that caused all the lawsuits to fly.
I have had success mixing applets requiring the Java Plug-in with those that need or run best under the Microsoft JDK, as follows:
When the Java Plug-in installs, do NOT take the option that makes it the default plug-in for the browser.
In your web site:
Launch the JDK 1.4 applets with the OBJECT tag.
Launch Microsoft specific applets with the APPLET tag.

3rd party extensions not working in 2014.1 -seeming disaster!

When I updated to 2014.1 my 3rd party extensions will not activate in Live view. Yes I am using fluid grid layouts. Does anyone know a quick work around? I could not have imagined this happening!!

Hi Ben, I am using project seven ....
Image Gallery Magic 2
Accordion Panel Magic 3
Horizontal Mega Menu Magic
Previously I was able to create a template with a fluid grid layout, use the extensions to create a menu, etc. and then click on the extension item (in the menu pull down) and make updates from the third party screen. Not having design view, I cannot access the extensions in live view. Regrettably, I have built many sites using these extensions and now it is very cumbersome to edit and create new menu items. The extensions do work fine in sites that are not fluid grid layout, but most of the sites I have created are FGL.

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

Loss of Music and Video and 3rd party apps not working on 3G

I've had to restore my 3G iphone about 10x now. The phone keeps "losing" my music and video, and then the 3rd party apps don't work. A reset does not help, I have to restore my phone and set it up as a new phone each time. I went to the Genius Bar, they gave me a new phone, but said it was likely a software issue. Has anyone else run into this? Is there a way to fix it? I waste like 2 hours re-syncing my phone every time this happens. I'm so disappointed with this iPhone 3G...I wish I hadn't sold my original iPhone and could switch back to that. Please, any help that anyone can offer would be GREATLY appreciated.

Thank you for replying. Did try this again, and then another recovery (holding down 2 buttons 'til Apple icon) but no luck.

Adobe Premiere pro CS6 effects presets not working

Presets in my Adobe Premiere pro CS6 is not working. What can I do? I need Work with Effect Presets
Message was edited by: Kevin Monahan

What do you mean "not working" What's not working? What are you wanting to do?
More information please.

Uploading 3rd Party Cert NOT Working Prime LMS 4.2

Hi all,
I followed the next steps but when I tried to upload the 3rd party cert into the Prime LMS using SSL Utlity Script option 5 or 6, the process is stuck. I did not get a message similar to step 4 like: "introduce the location of the certificate...."
1.-Create a CSR using OpenSSL as usual. (it always works on Cisco ISE, ACS, etc).
2.-Create the LMS Server Certificate on my local CA Server using the previous CSR.
3.-Downloaded the CA Root & Intermediate Servers Certificate (Base64 Encoded - In fact the Cisco Guide DO NOT MENTION this part, only when I ran the OPTION 4, I realized I needed it instead of DER Encoded I have been using regularly).
4.-Downloaded the Prime LMS New Certificate, again 64Base Encoded.
5.-Using SSL Utility Script, I ran Option 4 to validate the Certificates previously downloaded and the process went sucessful. No error messages.
6.-TRY TO UPLOAD the LMS and CA Server Certificates but the process is STUCK after introducing YES whe this is required.
Any ideas about this (may be is a bug or similar)?
thanks
Abraham

I get the identical message with a USB audio device (Cakewalk UA1G) attached to the camera connection kit. I started getting the message after I upgraded to 4.2.1.
I started a thread about it here this morning...
Apple has done something unpleasant to the USB power requirements in the 4.2.1 upgrade.

3rd Party Apps not working after 3.1 update

As the topic says, none of my third party apps are working at the moment. I tried doing a full restore and backup and that doesn't seem to do anything. I've also noticed that most of my music is not syncing, even though podcasts and movies are. I'm really trying to restore everything to the way it was because I have some valuable data on my third party apps that I really can't afford to lose.
Any ideas?

Same problem.
iPhone 3gs 32MB and MacBook Pro w/ iTunes 9.0: Updated iPhone to 3.1 software today and all apps fail at launch except the native ones. Thinking it was an authorization problem, I tried to purchase an app on the phone. It downloads but also won't launch. I then bought it through iTunes 9.0 and synced, but that fails as well. Did a full restore, and one hour of sync time later no change.
If this is happening to me it must be pretty common. I'm using all standard equipment that is under a year old. No jailbreak or other funky stuff. Anyone else with this problem please post. Not sure what else to do. Genius bar appts are booked up today, so booking for tomorrow night.

3rd party apps not working on new iPad 4G, 32GB.

Having read many threads on this, I have re-stored (existing backup and new), re-set, re-synced. I have downloaded new apps, deleted old ones and redownloaded, have tried to drag and drop apps from Library to Devices. Have reset my Apple ID on computer and pad, and currently have only one ID and then restored as new. Apple apps work fine. But not one 3rd party app opens. A short black flash on the screen and nothing. All the supposedly active apps' icons show in the "active dock". What am I missing?

Thank you for replying. Did try this again, and then another recovery (holding down 2 buttons 'til Apple icon) but no luck.

Ios 8 3rd party keyboard not working

after install the 3rd party keyboard, (tried swiftkey and swype) all my keyboards are not working and only appear a greybox that is without any key.

You might want to reconsider installing 3rd party keyboards: iOS 8's New Keylogger.
What with all the concern over privacy it's something to consider.

3rd party keyboard not working on 5s

Hello,
I am facing problems with 3rd party keyboard on iPhone 5s ios8. I have tried Swype, Swiftkey, Brightkey and TouchPal and I have the same problem with all. Once I add the 3rd party keyboard in settings and open any app and select the keyboard just disappears until I remove from the list of keyboards in settings.
Swype on my iPad Air works just fine with iOS 8.
Is anyone facing the same problem, appreciate if you can help

Go to Settings - General - Accessibility.
Towards the bottom you'll see a setting for Guided Access. Set this to Off. Your third-party keyboards should now work as expected.

3rd party applications not working (ie: word & photoshop) Help!

Hey,
I have been using my macbook without problems for about 7 months now, but last week it started refusing to open 3rd party applications such as word, or photoshop. I tried every application that wasn't apple software and the only one that works now is ableton live. All the non-working applications are legal, i tried reloading the microsoft office software, and even though the reload was successful, the problem still exists when trying to open any of those applications.
Thanks for any help
Jared Hill

Hi Red and Welcome to Apple Discussions ...
Sometimes when apps won't open, it's because the hard disk is full. Here's how to check to see how much free space is available.
Launch Disk Utility from the Applications/Utilities folder. Select MacintoshHD in the panel on the left. Now, tell her to look at the bottom of that page where it says: Capacity and Available. Rule of thumb... never allow free disk space to fall below 15 - 20%. It takes a minimum of 15% free disk space just to boot a Mac.
If that isn't the issue, because she can't open PS or Word, it might be a corrupted font that she has used in both those applications. Tell her to try this. She needs to find this file:
com.apple.FontBook.plist It's here: /Users/HerName/Library/Preferences. Open the Preferences folder, locate that file and drag it to the trash, empty the trash and reboot. It's ok to trash a pref file as any Mac will create a new one for her.
Carolyn

Adobe XI Pro 3rd Party Plugin not working

Similar Messages

Maybe you are looking for