Adobe xi std will not print to pdf access denied

Upgraded to XI std from v9 pro
OS is Win7
XI will not print to pdf
access denied
v9 pro prints to pdf
found no solution from web and forum search
found others the issue
will this issue be corrected in XI?
thanks
hime

I had the same issue - and it is discussed in several posts around the net without providing a solution.
Here is my solution on a Windows 8 system:
I reinstalled Windows 8 to identify the problem and installed stepwise all programmes I had
The problem occurred after I installed Corel Draw X6 with Ghostscript and the Shell Extension.
Once I went back to the last restore point BEFORE the Corel Draw installation, Adobe worked perfectly fine. I reinstalled Corel WITHOUT Ghostscript and the Shell Extension (didn't want to verify which one caused the problem) everything was fine again.
Yet, deinstalling Ghostscript and the Shell Extension did not solve the problem.
I also did not try to repair Adobe after the deinstall of Ghostscript and Shell Extension
Hope that helps some otheres here
Merry Christmas!

Similar Messages

  • Adobe X std will not print pdf.

    I have new HP envy dvt7 with acrobat X standard. and win 8. If I try and print pdf from any office document, the document just spools. I cannot delete doc in queue unless I turn computer off. If I go to task manager it says Word/Excel/Outlook"not responding".
    I tried reinstalling Acrobat but same results.
    Help!
    Maui Hi

    Have you done the updates on AA X, particularly if you have a 64-bit system. The updates are almost always necessary for 64-bit systems. However, there may be issues with AA X and Win8 -- I do not remember the compatibility matrix of versions versus OSs off hand. In any case, the updates are likely critical to AA X working properly.

  • Adobe Acrobat XI will not print to pdf. Error message says no pages selected.

    When I try to print a document created with Acrobat XI (recently updated), I get an error message telling me that no pages were selected. On the print window the "All" radio button is selected but the others are grayed out and not selectable. This was not a problem before I upgraded to XI.

    Hi marsha's angels,
    Please see No pages selected printing error (Printing & Prepress).
    If the solutions listed there don't do the trick, please let us know. It'll help us narrow down the problem if you can let us know what operating system you have, and whether the printing error is specific to one file, or occurs with any file that you try to print.
    Best,
    Sara

  • Acrobat X and XI will not print many pdf documents.

    Acrobat X and XI will not print many pdf documents. When I click Print, the document fades and I get a dialog box that says "Adobe Acrobat has Stopped Working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I was experiencing this with Acrobat X so I upgraded to XI, but the problem is exactly the same. I am using Windows 7 Professional operating system.

    Thank you for your reply. I have several printers available on our network,
    the program doesn't even go as far as allowing me to select a printer. I am
    trying to print to an HP 1320n or a LANIER MP C5502 PCL 6. I have changed
    the default printer, but the result is still the same. In does the same
    thing with Adobe (Standard XI) PDF set as the default printer.
    Stan Reznicek
    WinWholesale
    3110 Kettering Blvd
    Dayton, OH 45439
    937-294-4249
    [email protected]

  • My pc will not print a pdf made on mac os?

    my pc will not print a pdf made on mac os? Anybody out in adobe land have any helpful tips or suggestions, or I am I doomed to running to kinko's everytime I need to print a signed pdf from a mac user, it's 2014, and many dumb IT problems still exist in the world. But hey, we can put people on the moon, and sounds like mars is on the way, why adobe, why?

    This can happen with PDFs made in Preview (Part of Mac OS X). PDFs created with Preview are "quirky" at best with Reader. Especially if they contain form fields or images. THAT's an Apple thing. Whenever I need something "universal" I always make it with Acrobat Pro, because I deal with PC clients all week long.
    Even PDFs made with Acrobat on a PC, signed and then saved with Preview, will have problems.

  • Firefox will not print a pdf file

    I have Firefox 9.0 and it will not print a pdf file using the print icon but will print using Ctr+p. It will print in internet explorer. What do I need to do ?

    Which "print" icon - the one on a Firefox toolbar or the one in the PDF window?
    If you are using Adobe Reader to display PDF file, the newer version of Adobe hides the Reader toolbar by default - hit F8 to show the toolbar, the print icon should be on the Adobe toolbar.

  • Adobe Acrobat 8 will not convert a pdf to a jpeg

    Adobe Acrobat 8 will not convert a pdf to a jpeg. It just gives an error message and shuts down every time I to save it as jpeg. Any advice why this conversion will not work?  I use a PC and run Windows 7.

    The Acrobat 8 product family passed into End of Support years ago.
    Acrobat 8 is not compatible with today's OSs.
    Be well...

  • My photosmart 6520 will not print a PDF file.

    My photosmart 6520 will not print a PDF file

    Hi Silverfox2895,
    I see that you're having problems with printing PDF files.  I would try using foxit reader below.
    Foxit Reader
    Let me know how it goes. 

  • InDesign Will Not Print to PDF

    Good morning;
    I am currently running InDesign CS5.5 on Windows 7.
    I have a 103 page document which will only print to page 41 when I choose "Print to PDF".
    It does not export any pages, when I choose "Export" and select pdf, or when I choose a "PDF Preset".
    All 103 pages print to paper fine.
    The document was working fine earlier this week. I could print everything to pdf.LiveFlight reports no errors
    I opened an earlier version of the file, and it also could not print to pdf past page 41.Once again, there were no errors
    I've tried restarting the computer, shutting down, etc
    I was able to successfuly print the following to pdf:
    a 45 page blank document
    A 49 page document with images on each page.
    I deleted page 42, and it was able to go two pages past. This is the log generated after the operation is complete (and unsuccessful):
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    %%[Page: 3]%%
    %%[Page: 4]%%
    %%[Page: 5]%%
    %%[Page: 6]%%
    %%[Page: 7]%%
    %%[Page: 8]%%
    %%[Page: 9]%%
    %%[Page: 10]%%
    %%[Page: 11]%%
    %%[Page: 12]%%
    %%[Page: 13]%%
    %%[Page: 14]%%
    %%[Page: 15]%%
    %%[Page: 16]%%
    %%[Page: 17]%%
    %%[Page: 18]%%
    %%[Page: 19]%%
    %%[Page: 20]%%
    %%[Page: 21]%%
    %%[Page: 22]%%
    %%[Page: 23]%%
    %%[Page: 24]%%
    %%[Page: 25]%%
    %%[Page: 26]%%
    %%[Page: 27]%%
    %%[Page: 28]%%
    %%[Page: 29]%%
    %%[Page: 30]%%
    %%[Page: 31]%%
    %%[Page: 32]%%
    %%[Page: 33]%%
    %%[Page: 34]%%
    %%[Page: 35]%%
    %%[Page: 36]%%
    %%[Page: 37]%%
    %%[Page: 38]%%
    %%[Page: 39]%%
    %%[Page: 40]%%
    %%[Page: 41]%%
    %%[Page: 42]%%
    %%[Page: 43]%%
    %%[ Error: undefined; OffendingCommand: pdfmark; ErrorInfo: PUT nextImage ]%%
    Stack:
    [{nextImage} -dict-]
    -dict-
    [{nextImage} -dict-]
    -mark-
    -mark-
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    Any thoughts?

    Are you sure it’s been fully generated? PDF export is a background process.
    To be sure, select view PDF after exporting in the export dialog box.
    Bob

  • Windows 7, Office 2007, Adobe Acrobat cs3 - will not create a .pdf from word doc

    I can not create a .PDF file from a 2007 word.docx file.  I have tried a few different word docs, including a document I created just to trouble shoot with.
    I tried opening the .docx in Word and then going PRINT - ADOBE PDF.  When I do this 'nothing' happens. No dialogue box opens, nada.
    When I open Adobe Acrobat and try to 'create' I get this error: "Adobe acrobat could not open"name.docx" because it is not a supported file type or because the file has been damaged...".
    New Dell, Windows 2007, Adobe Acrobate pro 8 from CS3,  Word 2007. 

    Something to check.
    Help > About Adobe Acrobat...
    See what dot version is in place.
    Support for Office 2007 applications began with Acrobat 8.1; so, you want that or better.
    As to Windows 7 —  some Adobe information:
    --| Installing and using Windows 7 with Adobe Creative Suite applications
    http://kb2.adobe.com/cps/508/cpsid_50853.html
    --| Adobe product operating system compatibility
    http://www.adobe.com/support/OScompatibility.html
    --| Adobe Reader/Acrobat – Windows 7 FAQ
    http://www.adobe.com/products/acrobat/faq/
    From the FAQ page.
    --| Adobe supports Windows 7 with Adobe Reader/Acrobat 9; specifically, this starts with the 9.2 dot release.
    --| Adobe does not support Acrobat 8, Adobe Reader 8 or prior versions on Windows 7
         and does not plan to release updates to those versions for Windows 7 compatibility.
    Be well...

  • HP Photosmart Plus B210 series will not print a PDF files.

    When opening up a PDF file and attempting to print, the printer will not operate.  I get the "save as" box, and I can only save in a format that is not usable.  If I try to open the saved file, it cannot find an application to use the file.  What must I do to make the printer print the PDF file?

    Hi there clayb,
    Could you provide the community with a little more information to help narrow troubleshooting? what operating system is this for and are there any errors when printing?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Adobe Reader XI will not open any PDF file

    I have tried removing and reloading reader.  I have also tried using the WIndows Control Panel to repair the Adobe file.  Nothing has helped.  I cannot open Adobe Reader XI directly from the programs folder.  Nor will it open any PDF file when I double click the file.  I am running WIndows XP.

    Some other things to try...
    Update to Reader version 11.0.5
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Safari will not load pages cache access denied

    Hi,
    I am on 10.7.5 and a proxy server.  While tying to get the server to stop asking for my password every 60 seconds and following advice on this forum, something seems to have happened and safari stopped  loading  pages.  The message regarldless of the page is:
    Cache Access Denied.
    The following error was encountered while trying to retrieve the URL: http://www.apple.com/
    Cache Access Denied.
    Sorry, you are not currently allowed to request http://www.apple.com/ from this cache until you have authenticated yourself.
    Please contact the cache administrator if you have difficulties authenticating yourself or change your default password.
    Firefox and Chrome work fine - except they still ask for my password at regular intervals.
    I managed to transfer my bookmarks to firefox and am just wondering if this is worth it anymore.  DO I really need safari?  You cannot even re-install it!  You have to do the whole operating system.  Or should I migrate to Mavericks and a new upgraded safari?   I am fed up of trying endless work arounds that simply do not work for me.  Emptying caches, disabling extensions, dumping prefs etc
    Any help greatly appreciated!

    Re trying to get the proxy server to stop asking me for the password, all the steps you recommended which I no longer remember.  Something about making sure the proxy settings were in the keychain and open to all applications, then coy to the system keychain.  Repair permissions.  Tons.  Oh and in terminal the following:
    sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.UserNotificationCenter.plist
    which I think had a major negative impact but I do not know how to reverse it.
    I guess I am not advanced to fix these things.  Have gone to an internet cafe with normal non-proxy high speed internet and am downloading mavericks now because I am fed up with trying to fix something that never fixes. Safari works here.
    Hoping that the uptodate safari will be better.

  • Adobe Reader XI will not print PDFs. Can you please help

    Why can't Reader XI print PDF pages?

    Hello everyone:
    I have been totally frustrated as well and had to keep uninstalling the update and go back to my previous version of Adobe Reader 10.1.4.38.  Now I did what Frank above said and it finally allowed me to print PDFs again in the 11.0.09 version!  You may need to do some of the other changes but the below changed everything for me!!!!!
    'View documents in PDF/A mode' to 'Never' Preferences .
    Steven

  • Adobe Reader 9 will not open any pdf files

    I am running Windows 7 and use Adobe Reder frequently. Never had a problem. Last week, whenver I try to open a PDF file, I get a warning box "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."
    The only thng that changed recently was a couple large Windows updates... I am always suspect when a large update occurs. I uninstalled the Reader and Download Manager and ree-installed themm. No change in performance.
    I checked the registry key - it looks correct based on other posts.
    Does anyone have any suggestions what else to try??

    I've got the same problem. I'll look forward to solving this on this thread.
    It really sucks- I have a ton of pdf files, and can't save them to Documents or send them out of the Adobe file.

Maybe you are looking for

  • How to configure an Alert message if communicationChannel(JMS) stops

    All, Is there a way how to configure an alert when the communication channel stops. <b>Scenario:</b> In the path Runtime workbench->Component Monitoring->Adapter Engine->Communication Channel monitoring, if we see that a communication channel has sto

  • Reading Values from a Datatable to a backing bean

    I have a Datatable which has 3 columns. First Column is a Account Number and the Second Column gives the address of the Account Number. The Inputs 1 to 5 Account Number on the Previous Page. Depending on number of Accounts Input by the user - the dat

  • Time machine backup restoring problem

    i recently restored my mac. i saved everything through time machine on a hd. i want to restore some notes from the inbuilt notes app from mac. i know the folder is hidden and sandboxed and all and i followed the procedure, but MY PROBLEM IS that i do

  • Help needed with opening Camera Raw!

    I cannot figure out how to access Camera Raw.  I currently use Lightroom, don't see any reason to switch to Bridge.  I have downloaded the 30-day free trial of Photoshop CC, and would love to learn how to use it.  But without Camera Raw, I am having

  • SQL Issue in FROM CLAUSE

    It is possible changed the SQL statement below to repeat only once USUARIO table in the FROM clause ? SELECT U_PEND.NOME AS USUARIO_PEND      , U_DECLINADO.NOME AS USUARIO_DECLINADO      , U_REVISADO.NOME AS USUARIO_REENVIADO      , U_EMITIDO.NOME AS