Adobepdf.dll needed when installing CS3 with Windows 7.

I have tried some of the tips given on the Adobe site to install the Adobepdf.dll file located on the CD, but installation still fails.

Several folks have been successful with AA 8 one Win7 32-bit, and a few have reported success with 64-bit version. I have not heard of anyone using CS3, but if you can install it you may on your way. If Acrobat 8 installed, your first step is to do the updates, particularly if a 64-bit system. Indeed, AA 8 is not certified for use on Win7 and may fail in some aspects, but as I indicated, several folks have indicated success.

Similar Messages

I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

I keep getting an error message when installing iTunes with windows 8

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

Do I need to install CS3 on Windows 7 64 bit before installing CS5 Upgrade?

I am replacing a graphic designer's Windows Vista laptop with a Dell Precision T5500 desktop. Do I need to uninstall CS3 from the laptop and decommission the serial number? Then do I need to install CS3 on the new desktop before installing the CS5 upgrade? I was told I needed to decommission the installation, but I don't remember having to do that with other installations. Thanks in advance!

You should definetly deactivate any software before uninstalling. But you don't have to install CS3 in order to install CS5. Just have the serial number handy for verification. That said, depending upon the user's needs, you might want to leave CS3 available.
Bob

Installing CS3 with Windows 7, 64 bit

Re: Installing CS3 in W7 home premium
The installations stopped and asked for adobePDF.dll on windows vista CD ROM path C;\program files(x86)\adobe\acrobat 8.0\acrobat\xtras\acrobat pdf\i386\
I'm doing this installation in windows 7 home premium.
What should I do to continue with my installation?
Thanks!

hope this helps
just follow the steps below
http://kb2.adobe.com/cps/401/kb401731.html

"User Not Recognized" when installing UPK with Windows Authentication

Hi all,
When installing UPK Server with Windows Authentification mode, everything work fine until when the installer starts populating the Library. I get an error message saying "User is not recognized. Please enter a valid administrator user name and password. Click OK to enter another name or click Cancel to stop the upgrade process."
I tried using "my current Window account" and different Windows account when asking to give a default Developer admin login during the install but I still get the same message.
I might be forgeting something this time since I have installed UPK tones of times and never got this error.
Many thanks.

Hello,
Thank you!! After much testing and environment and OS changes, I found out that I totally forgot my Windows administration from over 7 years ago on a security feature that Microsoft put into their OS's. If you are using a friendly DNS name to publish to your clients (instead of them typing in the server name as the URL) and you want to utilize Windows authentication, a registry entry will need to be entered in order for the OS to be allowed to pass the windows auth through to that URL as well.
Example registry entry:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
"BackConnectionHostNames"=hex(7):
KB Article:
http://support.microsoft.com/kb/896861
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
Right-click MSV1_0, point to New, and then click Multi-String Value.
Type BackConnectionHostNames, and then press ENTER.
Right-click BackConnectionHostNames, and then click Modify.
In the Value data box, type the host name or the host names for the sites that are on the local computer, and then click OK.

Installed CS3 with windows vista bit AE won't open.

When my old faithful computer motherboard fried, I had to get a new computer with Windows Vista Home Premium.
I had CS3 loaded and working without a glich on my old XP computer.
I've loaded the whole CS3 suite, but when I open After Effects nothing happens. Using Window's Task Manager, under "Applications" After Effects doesn't show up as a running but under "Processes" the file "AfterFX.exe *32" is listed as running.
I've also tried uninstalling CS3 and reinstalling it in the directory "Program Files" rather than in the directory "Program Files (x86)" and nothing changed.
I've tried to opening all the other programs in CS3 with the similar results. Nothing opens, but their .exe files are listed under Task Managers "Processes".
I'm using this as a vol lic product, so I'm not sure how much tech support I can get.
Thank you for any help you can give me.

I'm sorry it didn't work. I probably don't have an answer for you since I'm not an expert or anything.
One thing I thought was weird was that the software version on my computer for the motherboard was version 6.xx (whatever) and the software I downloaded from the HP web was version 5.xx (whatever). It made it work though..
I think the update would be on the HP site, not the MSI site. Go to hp.com, downloads, and put in the name of your computer. Download/install whatever motherboard software they have. If that doesn't work, go to the adobe website and search for the document kb402213 and work through that. It's what the person you give Adobe $40 to help you is going to do.
Good luck. Hopefully this helps.

Adobepdf.dll missing when 99% of Adobe Creative Suite 5.5 Web Premium is installed?

99% Installed on Adobe Creative Suite 5.5 Web Premium then received an error window: The file AdobePDF.dll on Adobe Acrobat CD-ROM is needed. Type the path where the file is located, and then click O.K. Browse to the file and copy files from it. Please advise as to how to finish this install. I am able to open each one of the applications that were installed from the Program Files, but the install is still sitting at 99% and the Files Needed window is still up. Please advise. Thank you!

I did see this information, but I do not have 64 bit, nor am I trying to
install CS3. So, will this work for 32 bit and CS5.5?
Thank you!
Deb Jones
District Technology Trainer
Learning Through Technology & Media
Charlotte County Schools
[email protected]
941.255.0808 ext. 3144
[email protected] writes:
>Re: Adobepdf.dll missing when 99% of Adobe Creative Suite 5.5 Web Premium
>is installed?
created by http://forums.adobe.com/people/Manish_1988 Manish_1988 in
>Creative Suites Windows - [
>http://forums.adobe.com/message/4253209#4253209 ]View the full discussion

What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

Hi,
i am connecting a Bluetooth device to my laptop. I notice that Message Analyzer could capture Bluetooth messages only if I am using windows 8? I am using window 7. What driver or software patches do i need to install in my windows 7 laptop, in order for
the laptop to capture Bluetooth messages, which is possible with window 8?
Also, i notice that using window 8, i am able to capture Bluetooth message but i am not able to display wireless perfromance statistics such as signal strength, throughput, etc? Is there a way for me to get such information.
Please help.

If you look at the link you sent me:Default Trace Scenarios
http://msdn.microsoft.com/en-us/library/jj659262.aspx
"Windows 8 Bluetooth (Windows 8/Windows Server 2012 or later)
Troubleshoot Bluetooth issues"
So what about Windows 8 earlier? Not supported?
My question: What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

Problems installing cs3 on windows 7

Does CS3 install and work normal when installed on a windows 7 system? Some say it installed / worked just fine. Others that they had problems installing or getting it to run. Others that it depens on which windows 7 system you have. Etc. etc.
What do I have to take into account when installing cs3 on a windows 7 machine? I know it's not designed for windows 7 but I rather use cs3 then cs4.

No one yet. I'm thinking about bying a laptop which has windows 7 already installed (I think home edition), but googling I found various topics of people having trouble getting cs3 master collection to work (programs of master collection not being installed, error messages about missing windows files etc, etc.). Which version of windows 7 should I have to make cs3/cs4 work? Or should I be able to install cs3/4 on any windows 7 computer without any problems? Or should I do anything specific before installing?
I'm a little worried that I won't be able to use cs3 (which I much rather use than cs4) when I buy a new computer with windows 7.

I need help installing flash on windows 8

I need help installing flash on windows 8

Chris… No I was using the desktop version, I cannot stand the M version, guess it would be nice if I had a touch screen..…when I finally got my computer to download the Acrobat Standard XI program, not sure how it worked, but I think it had something to do with Windows 8 not allowing itself to update all my apps and programs, even though my computer was set to automatically update any Windows/Microsoft updates…finally I got my Windows updates done, it downloaded like 36 files…and then I had to restart,(which also could have been playing a factor)…so finally got the program downloaded on Windows 8…but then I tried to run the new program and it says install serial #...so I assume that it was asking for the serial # for the Acrobat Standard XI…finally after googling the web, I found somebody that said try your older serial # from the previous program, and when I did this it finally works.. you would think with a brand new Windows computer I would have no problem installing Windows Updates…somebody needs to make a sticky about this, I am sure I am not the only one haiving this problem..
Thanks,

I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
directly for serial number issues.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

Help installing DW3 with Windows Vista

I am trying to install Dreamweaver CS3 with windowa vista and
I keep getting a error message "Internal Error 2739"?

If that is a Vista error, search here
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

While I agree with the direction of the suggestions with installing packages for X-windows, we do not have a blanket 'apply any package' recommendation.
In particular we do not support altering the kernel (although we do have exceptions which we review on a case by case basis).
Basically, if the you want to alter functionality that would not impact core functionality you are usually fine.
A good guideling is : The more dependencies that there are between the package / rpm you are considering using the higher the potential impact on functionality - meaning higher chance for problems
Note: We do use VNC including Real and Tiger regularly , but we have no hard recommendation on how you may want to use X-windows. I have never seen a limitation other than comments on bugs
or incompatibility within the X-window product itself with certain kernel levels.
Patching may overwrite some packages that you may install, however, _depending on packages/rpms added_ there is also the possibility that you will break existing functionality to the point
that patching itself will fail ( we have already seen a few cases of this in which case the proper mitigation is to remove / roll-back any alterations to the ODA before patching, and then adding the packages/rpms
back after the patching is completed.
From what you are discussing the impact should be low without conflicts, but please consider the above, and if you have specific packages which you consider potential problems
please create an SR so that we can review packages / rpms on an individual basis.
Once again: the main criteria for not supporting rpms is regarding the kernel itself
Chuck

Is anybody else experiencing crashes when installing iTunes for Windows?

Is anybody else experiencing crashes when installing iTunes for Windows?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box (similar to those given above) are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Adobepdf.dll needed when installing CS3 with Windows 7.

Similar Messages

Maybe you are looking for