Adobe Photoshop Imageでの画像の削除ができません

Adobe Photoshop Image の画像が削除できるものとできないものがあります。画像を削除しようとすると「○○○を削除できません。ほかの人またはプログラムによって使用されています。ファイルを使用している可能性が あるプログラムを全て閉じてからやり直してください。」と言うエラーが出てしまいます。プログラムは全部閉じてるし、再起動や一度電源を切ってもだめです。どうしたら削除できるのでしょうか? わかる人がいましたら教えてください。

いろいろやり方は考えられますが、まず手始めに「プログラムを全て閉じてからやり直してください」に従ってスタートアップを切って試してみましょう。
XPor2000でしたら起動処理の時Shiftを押しながら立ち上げる、98orMeでしたらシステム設定ユーティリティを出して、スタートアップの項目を外して再起動、95はctrl+a lt+Deleteで一項目ごと終了です。
後、もう一つ試すとしたら、スタートを右クリック+検索で削除したいファイルを出して、そこから削除できないか。
お試しください。

Similar Messages

  • Advice needed regarding a - Adobe Photoshop Image 15 (.psd) - I can't open them correctly?

    Hi folks,
      I recently agreed to work on some art for a friend, he sent me some files that appear on my PC as Adobe Photoshop Image 15 (.psd) - Only when i open them in my Photoshop CC (All updates installed that are available from the time this was posted) they don;t appear to be the correct images? I have Google'd the phrase above but nothing appear on my searches that would enlighten me to what i may need to open these files correctly? can anyone let me know if the file type above is meant for Photoshop or one of the many additional programs within adobe's CC? If it is a Photoshop format then i apologies for time wasting and it may be that the file was corrupted possible before being sent?
       Thank you for your time.

    Does you friend also use Photoshop CC or does he use Photoshop CC 2014.  There may be some incompatibilities is some layers if he uses CC 2014..  However  CC should be able to open  .PSD file.   And Adobe Photoshop Image 5 type files like PSD, PDD extensions should be associated with Photoshop.

  • All File Formats Default to Adobe Photoshop in CS4

    I recently upgraded to Creative Suite CS4 from Photoshop CS3. Previously, all my images, when viewing them in Windows Explorer, were defined by a specific icon and file type. For example, GIF images were associated with a specific GIF icon and JPEG images were associated with a specific JPEG icon, etc. Now with CS4 they all are listed as Adobe Photoshop Images with the same PS icon. I cannot tell when browsing what type of image file they are. Very frustrating when working in print as well as web.
    Any one else run into this and does anyone have a solution?
    Thanks!

    First of all you should always have the extensions showing. Always.
    When you install Photoshop one of the dialogs allows you to choose which file types you want Photoshop to open. Did you skip that dialog?
    Second, you can associate file types with different programs by right-clicking and choosing Open With, browse for the program and choose it, making sure "Always use this program..." is checked. So you'll have to go through and choose which program you want associated with each file type.

  • Adobe Photoshop CS3 Image Processor not converting files to sRGB Profile

    I have been experiencing a problem with Photoshop CS3 Image Processor no longer converting profiles to sRGB.   It converts all of the files from Camera Raw to JPEG, but not sRGB as well.  I used to be able to batch convert an entire folder of RAW images to JPEG, sRGB through the Image Processor.
    My Photoshop CS3 Working Space is Adobe RGB (1998).  I need to convert an entire folder of images selected in Bridge to sRGB working space in order to publish a photo album from one of the on-line publishing companies.  I can open each individual Camera Raw file in Photoshop and convert each to JPEG, sRGB, but this takes a tremendous amount of time.
    The following procedure has worked for me in the past, but for some reason no longer works:
    I select the images in the desired Bridge CS3 folder.  Upper tool bar, "Tools" > "Photoshop" > "Image Processor".  In Image Processor:
    Section 1 - ""Process files from Bridge only (11)"  Whether or not I place a checkmark by "Open first image to apply settings", it makes no difference in the outcome.
    Section 2:  "Save in same location"
    Section 3 - "Checkmark by "Save as JPEG, quality 12".  Also a checkmark by "Convert Profile to sRGB"
    Section 4 - Checkmark by "Include ICC Profile"
    I replaced my iMac one month ago and reinstalled Photoshop CS3, but this Image Processor problem had been occurring even with my old computer.
    Not sure if you need this information:
    I'm currently on Mac OS X Version 10.6.4
    Processor:  2.93 Ghz Intel Core i7
    Memory:  8 GB 1333 Mhz DDR3
    I don't know if it's related,  Photoshop CS3 on my old computer was running in Rosetta.  I don't know if it's running in Rosetta now, the name does not appear when Photoshop boots up.  How do I get it to run in Rosetta again?

    Heh heh heh.  It's always true that we find the answer just after making public our problems, which in turn we did after trying to find the problems ourselves for hours.
    Thanks for following up with the answer.
    -Noel

  • Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    I use a  windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor..  I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run.  The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
    What does you system configuration?

  • Adobe Bridge CS3 not opening Photoshop Image Processor

    I selected one, four, and multiple pictures in Bridge to reduce the file size of jpgs. I went to Tools > Photoshop > Image Processor. Nothing happened. Photoshop did not open. That got me to thinking that sometimes while I am in Photoshop Bridge won't open either. Any ideas on resolving issue of "Bridge not opening Photoshop Image Processor" would be greatly appreciated.

    Hello Curt Y, Everything is checked in the "Startup Scripts," including Bridge (twice) and Photoshop (twice). Not sure why duplicate entries but there are.
    If you mean that you have two of the same versions (both CS3) in there that indicates there is something wrong with your install
    If you have any suggestions regarding being able to access the Image Processor to resize pictures and such without first opening Photoshop, I'd greatly appreciate it. If not, the work around will have to suffice.
    My first goal would be to reset the preferences for both PS and Bridge and then try again
    see also this KB document, section preferences reset:
    http://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
    And inhere also info on how to retrieve your path for cache to manual delete it.

  • Edit images in Adobe Photoshop Elements

    I am helping a student who is running iPhoto on Maverick.  He wants to edit his images in Photoshop Elements.  We set his preferences to do this but when he selects an image and clicks on Edit, all he gets is the welcome page of Photoshop Elements.  The image doesn't open in Elements.  What could we be doing wrong?
    Mary Lou

    Previous versions would install a folder with the file you want, Adobe Photoshop Elements Editor.app, buried one layer down in another folder named Support Files.  That's the one you want to select from iPhoto.
    I don't know if the layout of the installed files is the same with the newest version. However, the following may be of help:
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Screenshots are from PSE 10
    Note 1:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    Note 2:  editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

  • Adobe PhotoShop CS3 - Image Enhancements

    Hello.
    I have an extensive website with images...
    http://www.marsesa.9f.com/slide_show.html
    I use PS CS3 to enhance images. Enhancements revealing details not visible to the naked eye.
    My latest images. A Mars dust devil.
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_A.jpg
    Enhanced......
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2.jpg
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A1.jpg
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A10A.jpg
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A11A.jpg
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154B2A16C.jpg
    I am trying to duplicate these images. No success.
    I did not take notes or saved my history.......I really would like to re-create these images.....Re-create the steps needed duplicate this image. I
    only need to duplicate or reveal the details - not the colors (false colors are from a gradient filter - a grayscale maping tool).
    http://marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A10A.jpg
    My challenge to anyone out there.....Re-create or duplicate my images.......In this way, someone else can confirm my images.
    Base image.......I have used the TIFF image as my source.
    http://photojournal.jpl.nasa.gov/catalog/?IDNumber=PIA04154
    I am claiming that these so-called Martian dust devils are not natural events. Technology or intelligence is involved.
    I have more dust devil images - Slide show "Spirit Rover Dust Devils"
    Ken

    Hello Mike.
    Typical forum response.....One of the reasons I was reluctant to post a topic.
    I am trying to stay away from forums....They are whacky....Like a noisy bar or pub......(smiling)...
    I have been emailing universities.....Phd types, researchers and scientists.......
    My target audience is people from this group....Eventually. They are impossible to reach. I figure posting a forum topic will attract
    someone with a strong knowledge base of Adobe Photoshop CS3 or CS4 (algorithms).
    http://www.adobe.com/technology/people/seattle/salesin.html
    Enlarging, Surface Blur, Noise reduction, Exposure (gamma adjust), Shadows and Highlights, Gaussian Blur (radius 0.3 pixel), Sharpening,
    Curves - both customized and presets (contrast adjustments), Color balance, Hue and Saturation, Selective color, and a randomized gradient fill (noise samples, a grayscale mapping tool), does not create faces or addtional details. I know this from using PS CS3.
    None of these steps (hints) alter an image. Your book recommendation does not apply.
    Given that said, I have used those steps to get from this image...
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_A.jpg
    To this image...
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A5.jpg
    This.....
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A11A.jpg
    Finally, this image..What are we looking at?????....A randomized generated image???....Alterations just by using Surface Blur and such???
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_E7A4.jpg
    http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154B2A16C.jpg
    I do not use pen tools, cloning tools, or any type of drawing steps.
    What kind of program creates artwork on its own???.....
    As I said earlier, I did not take notes or saved my history....I wish I did....
    Ken

  • Editing non-raw image files in Adobe Photoshop

    Hi,
    I am currently digging into the world of Lightroom and setting up a work flow which in my case needs to include editing non-raw files in Adobe Photoshop.
    Please bear in mind that I am quite new to Lightroom so I am not sure I have found all shortcuts and settings to manipulate.
    I will explain what I trying to do (and why) and hope that the community can comment and help put if possible.
    I myself shoot almost everything in RAW format, and I have been using Photoshop (PS) and Camera Raw (ACR) for some years now. I am now on Photoshop CS6.
    But now the amount of images to handle requires a CMS, so I went for Lightroom 4 - hoping/believing that I would find an effective and efficient work flow integration between the two Adobe products.
    But I am more and more also helping others to enhance their images, and I most often get jpg files as image source.
    I am used to using PS layers, filters, smart objects etc extensively to do what I want to do.
    OK, I admin that I already use ACR quite a lot, and sometimes even as the only tool even for jpg images.
    I have began diving/snorkeling with friends and often the images we bring back home is in jpg format, and so far I still believe that the best image "restoration" can be done in Photoshop using adjustment layers, channel mixing and filters to get satisfactory results.
    So now on to my concerns and issues:
    1) Lightroom user interface efficiency - "Edit in"
    When I want to edit a jpg image in Photoshop I :
    action
    comment
    - left click image to select it
    ok, I agree this is needed
    - right click image to bring up context menu
    ok, I agree this is needed
    - move cursor to "Edit in", and wait for another context menu
    ok, ...
    - click "Edit in Adobe Photoshop CS6"
    Yes that's want I want
    - Lightroom presents the "Edit Photo with Adobe Photoshop CS6" selection menu.
    Yes I know, I saw it the last
    nnn times I did it
    - if I need option "Edit a Copy" or "Edit Orginal" I move cursor again, left click to select ,
       move cursor to Edit and left click 
    - and finally Lightroom sends the jpg image to Photoshop as a jpg image
    No, I want a tiff file since that
    is what I have set up in
    preferences
    OK, I know that I can also use the keyboard instead of mouse for this, but the number of actions required from my side is pretty much unchanged.
    For a quick working, Lightroom and PS skilled person, this is just annoying.
    Is this effecient?     Well it depends. For Lightroom beginners this is good. But for me it is a true annoying obstacle
    2) Lightroom "Edit in" - is it effective
    Is this effective?     I say no.      I have specified in preferences that I want PS to receive a TIFF file in Adobe RGB 1998 color space
                                                       Also, I cannot change to TIFF in PS without losing the link between the two images. (If I do, the new TIFF file is not imported by Lightroom, so I have to that manually)
    I have found out that I can choose the path "Select image - select "Open as Smartobject in Adobe Photoshop".
    This will give me a tiff file, and when saved in PS the jpg and tiff files are linked and Lightroom has automatically imported the tiff file into the Catalog.
    What I need / what I would like to know / what I would like to have:
    * Is there a (customizable) keyboard shortcut that enables me to: Select Picture + Use shortcut  - and then I end up in Photoshop (with the Edit option I use 90% of the time) ?
    * Is there a preference that I can set so that jpg images also are opened as tiff files in Photoshop per default?
    * Is there a way to select multiple images and launch them all in Photoshop (and keeping the link between the jpg and tiff files) ?
    * I would like a preference setting allowing me to choose that any new file coming back from Photoshop (after "Edit in" ) is written to a sub-folder, or to a specific folder set by me.
       This would align with my work flow for jpg handling, where the jpg is the "original" and the tiff file is what will eventually end up as image "master" (from where I print,  or produce web / HDTV jpg's).
    * Is there a way to automatically launch a Photoshop Action on the file coming from Lightroom?
       This would also help in my work flow. E.g. I have currently 100 jpg's and avi files which are UW (under water shots) and the adjustment layers I build are always the same (to start with).
       Of course, I can launch the Action once I am in Photohop  - but again, doing 1-5 times is ok, doing it more than 100 times ...
    * I am skilled computer programmer  - can I use Lightroom SDK to write plug-ins to achieve the above enhancements ?
    Regards
    Bosse W 

    * Is there a (customizable) keyboard shortcut that enables me to: Select Picture + Use shortcut  - and then I end up in Photoshop (with the Edit option I use 90% of the time) ?
    -- The keyboard shortcut Command/Ctrl+E will perform steps 2-4 in your above list. You only have to click the Edit button, as the last choice (Edit Original, Edit Copy, Edit Copy with LR adjustments) will be remembered.
    * Is there a preference that I can set so that jpg images also are opened as tiff files in Photoshop per default?
    -- No, a JPEG in Lightroom will always open as a JPEG in Photoshop. If you have made changes to the file that are not supported by the JPEG format (e.g. added a layer) when you go to save the file, it will be saved as either a TIFF or PSD, based on the preference in Lightroom.
    * Is there a way to select multiple images and launch them all in Photoshop (and keeping the link between the jpg and tiff files) ?
    -- Yes, select all the files you want to edit, and use the keyboard shortcut, menu command, or right-click context menu command.
    * I would like a preference setting allowing me to choose that any new file coming back from Photoshop (after "Edit in" ) is written to a sub-folder, or to a specific folder set by me.
       This would align with my work flow for jpg handling, where the jpg is the "original" and the tiff file is what will eventually end up as image "master" (from where I print,  or produce web / HDTV jpg's).
    -- No, there is no automatic way to do this. If you use the Edit a Copy method, the copy is created instantly in the same folder as the original.
    * Is there a way to automatically launch a Photoshop Action on the file coming from Lightroom?
       This would also help in my work flow. E.g. I have currently 100 jpg's and avi files which are UW (under water shots) and the adjustment layers I build are always the same (to start with).
       Of course, I can launch the Action once I am in Photohop  - but again, doing 1-5 times is ok, doing it more than 100 times ...
    -- Yes and No, this is not something that can be setup in Lightroom, but you can set it up in Photoshop using the Script Events Manager.
    * I am skilled computer programmer  - can I use Lightroom SDK to write plug-ins to achieve the above enhancements ?
    -- Yes: http://www.adobe.com/devnet/photoshoplightroom.htmlhttp://www.adobe.com/devnet/photoshoplightroom.html

  • My photoshop elements 8 no longer works...when I open an image in it, the application opens and then suddenly closes with the error message:"Adobe has detected that the application Adobe Photoshop eleents has unexpectedly quit"

    Can anyone help me with the 'unexpectedly quit' error message I now get when opening an image in Photoshop elements 8?

    Imilgrom
    If your product is Photoshop Elements, then you have posted in the wrong forum. Somehow your thread got posted in the Adobe Premiere Elements Forum (video editing).
    Please re-post your thread in the Adobe Photoshop Elements Forum (probably quicker choice) or wait for a moderator here to see your thread here and then move it from here to there.
    Photoshop Elements
    ATR

  • "Adobe Photoshop Lightroom 4.pkg" is damaged and can't be opened. You should eject the disk image.

    After 3 different downloads (2 in Safari, 1 in Firefox) I still get this message when I try to open Lightroom package: “Adobe Photoshop Lightroom 4.pkg” is damaged and can’t be opened. You should eject the disk image. I have a feeling it has to do with 3rd-party software on my Mac OSX 10.8.2 - how do I get around that?

    If you have already tried an alternate web browser then your next step would be to try an alternate Internet connection.  Perhaps try a wired connection if you are using wireless for example.

  • I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

    I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

    If you had given us sensible information, I could look it up for you if your efforts fail.
    Right now, I don't even know if you are on a Mac or on a Windows box.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How do I add video in my Photoshop images and graphics? I need it to play in Adobe Acrobat when I'm done.

    I designed an electronic press kit and I need the video to play on it. I'm getting the video link from YouTube so I was wondering how to make that happen. I already tried putting the YouTube link behind the video layer so it can be clickable in Acrobat, but when I sent it to the online magazine forum there was a lot of lines in it. I saw this YouTube video on how to do it but it requires ImageReady TUTORIAL-Add video to your Photoshop images and graphics! - YouTube. I don't have the Photoshop to ImageReady button in my PS....HELP! How do I get this done?!?!?

    That tutorial is extremely old. ImageReady was last used in CS2. In other words that program no longer exists.
    Luckily video made its way into photoshop so you can easily import your video into photoshop.
    Instead of an animation panel, it is now called the timeline panel. When the panel first opens it will ask you if you want an animation or a movie. Choosing movie will reduce the number of layers required down to just 2, one for the movie and one for the TV image. Since this is a timeline, you can split the timeline to remove any portion of the video you do not want or need to add an effect to that area of the timeline. Each time you split the video, it will move it to a new layer for you.
    You can still export as an animated gif by using the File>Save As dialog box. or You can export as a movie and choose another video format. Which format and codec you can choose will depend on how many other video apps of Adobe's you also have installed.

  • How do you convert Adobe Photoshop Deluxe 2.0 image to JPEG format?

    Have Adobe Photoshop Deluxe 2.0. Trying to convert to JPG after altering original JPG but it saves as a "File". Won't view when I try and review on PC - working on a OSC Mac G4. Thoughts? Is there a way to convent these back to JPG files - have 1000's of images and not able to post online or share.
    Not recogizing image/format when I try and use Process Multiple Files tab (which is what I ideally want to do).

    Will not accept the image format.  My Dad is using OSC Mac G4.  I can convert individually using Gimp2, but don't have interest in doing that 1,500 more times...

  • Adobe Photoshop cs6 over citrix, Image Issue

    HI Guys,
    I am Citrix Tech, could you please help or suggest me in get this issue sorted. we have published Adobe Photoshop CS6 over Citrix which uses ICA protocol. When user launches the application and opens a image it loads with Blue coat color over the image.

    Thanks for the update, yes initial checks reveals it is something to deal with Citrix. I was able to open the same image fine locally on Server, but when accessd via citrix it comes with Blue color.
    As of now Citrix have advised to have Citrix Roll pack 05 to be installed.
    Will update if that fixes

Maybe you are looking for