AdobeX problem - opening/printing documents

I installed AdobeX and am having a problem opening documents through my
company websites to print out. I have uninstalled and reinstalled it, still
does not work. I have run the Repair program, that still does not work.
I would love to reinstall the older version but it is no longer on my computer.
Can someone please help? Thank you.

Thank you a lot Brad!!
We use Office 2003 and the note 549610 solves our issue!!
Best Regards.

Similar Messages

I am having a problem opening pdf document. I get error message: "Adobe Reader has stopped working"

I am having a problem opening pdf document. I get error message: "Adobe Reader has stopped working" then I get Windows is looking on line for a solution, but then my document closes. I tried uninstalling and reinstalling Adobe Reader XI, rebooted my computer but this did not help. I get the same message. What to do?

Can you open Reader by itself? If so, check if disabling Protected Mode improves the situation [Edit | Preferences | Security (Enhanced)].

Problem opening Office documents from KM

Hello, I have some problem opening Office documents from KM.
We stored a lot of office documents (Excel, Word ecc.) in a File System repository (the standard repository "/documents"), when I open one of these files, before to view the document, a little logon window appears, it asks portal user's credentials.
If the user presses the "Cancel" button the logon window will be closed and the document showed, but on the next attempt to open an office file the system will asks again the user information .
If the user gives the right information the documents will be showed and the logon window does not appear again..
How con I avoid the logon request for each Office document in my repository?
Any suggestion??
Best Regards

Thank you a lot Brad!!
We use Office 2003 and the note 549610 solves our issue!!
Best Regards.

When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)

When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)

Hi chasore,
Are you still facing this issue?
Is this issue happening with all the documents you have. If yes, i would suggest try uninstall and reinstall. Or if the documents are located on some shared drive try to copy them on local machine and test again.
Regards,
Ajlan Huda.

Problem opening Office documents from the desktop

Hi all,
I'm a new Mac user who just installed the Student/Teacher edition of Office for Mac 2004 (yes, i removed the trial version first), and I'm having trouble opening my documents when I double click the icons on the desktop. I get an error message that says "Unexpected error occured (error code -10660)". I can only open the docs if I open the appropriate program first.
Is this normal for a Mac? My PowerBook is only 1 month old, and I don't want my unfamiliarity w/Macs to cloud a serious problem if there is one.
Any advice would be appreciated.
Thanks,
RH

I learned something new:
I hit Control+Click and selected Open With and clicked Word, and I got a new error message telling me that I couldn't use that application b/c it was in the trash. The only thing in my Trash is my Test Drive version, which just expired. When I dragged the Test Drive folder to my desktop, I was able to double click any Office doc and open it directly.
I've clearly made a mistake in uninstalling the Test Drive version. How can I fix this, and do I need to remove (and re-install) my complete version of Office to do so?
Thanks,
Reema

Problem opening indesign document (database publishing?)

Hello
I need help urgently from someone who has experience with InDesign files that refuse to open.
My client has created 2 documents, and they have no problem opening it. ~They tell me it is made with InDesign CS2. I have tried to open it with CS/CS2/CS3 and even an .inx version of the file will not open.
Error message is: < Cannot open the file "xxxx.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be op in another application.>
The file is filled with txt file from a database, that needs to be replaced by me.
My client has no extra plugins installed, I have asked to do a 3rd party check, but list is empty.
Help, what can I do. I have 2 files that need to be worked in quickly. Anyone has experience by peeking into the file with a hex editor or text wrangler to see what is going on? I can send 1 file via e-mail (1.5 MB size)
Thanks,
Aram de Glas

thanks for all who have suggested solutions. I have solved it in the mean time, by removing all pages except the master pages, and had it re-saved. So the conclusion is that there was something on one of the pages that made it impossible to open. My bet is a faulty image or logo
Aram

Problem opening pdf documents with reader

We have an hp computer running on windows 8. It came with adobe reader installed which worked fine until about a month ago. Since then when you try to open a pdf document on an online page, a message comes up "There is a problem with Adobe Acrobat/Reader. If it is running, pleae exit and try again." When you try to open other documents that have been saved to the computer a message comes up Adobe Reader Protected Mode which indicates that Adobe Reader cannot open in protected mode due to an incompatibility with your system configuration. It then asks if you want to open reader with protected mode disabled, always open it that way or not open with protected mode disabled. If you choose the open it with protected mode disabled this time, a message comes back indicating Acrobat failed to load its Core DLL.
We've uninstalled reader and downloaded apparently successfully the version for windows 8 several times, but without any success - same messages come up. Sound familiar at all? I don't want to have to pay a computer guy for something that really seems like it should be an easy fix (though I'm not a tech person, so not sure I find too many fixes easy!).
Thanks in advance for whatever anyone can offer.

This may be helpful:
http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Problems opening up document

I am having a problem opening up a document that I had to download. The problem that it saying I am having is with Adobe Reader; however, it is successfully updated and installed. Help please, this is for a college class.

It is very difficult to help since you don't provide any details.

Problem opening email documents

When I try to open a document in my email I get the message: "Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item". I also get this message trying to download Adobe Reader 9. How can I resolve this?

It may be a security problem or it may be an installation problem. Disable all antivirus/spamware programs, try uninstalling Reader and then re-installing Reader.

Problem opening Office documents

My problem is minor, but frustrating. If I receive an Office document via e-mail, clicking on the attachment in the e-mail does not open Word, Excel, etc. I have to first save it to desktop, open the program and then open the document. Any advice?

Hello! If using a two button mouse right click on the attachment and if not do a control click on the attachment and you can open it by whichever program you wish. Tom

I am having problems opening any document in CS3.

I keep getting an error mesage that reads... the specified module could not be found C:\Program Files\Common Files\AdobeVAdobe Version Cue CS3\3.3.0\Version CuwUI.DLL. The program then closes. How do I fix this problem. I have Windows Vista Home Premium.

On the Mac open System Preferences > iCloud. Deselect the box next to: Documents & Data then reselect it.
On the iPad tap Settings > iCloud
Switch Documents & Data off then back on.
Give iCloud a minute to re sync the data then try opening that document on either your Mac or iPad,

Problem open "pages" documents from icloud

Hi,
I have pages for MAC and IPAD. Quite often I cannot open or save documents located on icloud drive. The same document can be opened if I transfer it to local disk or if I look to it using "preview" but when I try to point to the orginal idrive location I get the message "document cannot be opened" or "document cannot be saved" This is odd enough as in icloud settings have pages enabled. The all idea is making my documents on MAC and being able to read them using IPAD or MAC at my own convenience.
Any clue?
Thanks,

I found it helpful to convert all my old Pages '08 files to .doc files. They can be opened by the new version of Pages.
Since the new version of Pages is no longer back compatible, and so not good for anything you want to keep for a long time, you might consider using an open source word processing application like Libra Office. That's what I had to do. After seven years of being a happy Pages user - archiving thousands of files in Pages -Apple has abandoned us. I no longer think it is wise to use the new Pages and then five years down the road (or sooner) not to be able to open them in a newer version.
If you would like a quick way to convert your Pages '08 files to .doc, let me know.

Problems opening & printing pdf files created on a Mac

I am at my wit's end! I recently upgraded to a new version of Acrobat and suddenly a lot of my clients could no longer open my pdf files. I uninstalled the latest version of Acrobat and reinstalled an older version (Acrobat 8.1.3). Some clients started being able to open my pdf files but others could not. So I started using the Acrobat Share server and sending links. Some of my clients cannot open those either and many cannot print even if they can open the files that way. I personally also cannot print from the Acrobat Share server. The pdf files print out with all the surrounding graphics and application design elements. I also can't open the pdf files that I created on my Mac using my PC laptop running Vista. I have tried opening and printing both pdf files and the Acrobat Share links from my Mac and my PC laptop running Vista, to no avail.
I was under the impression that compatibility problems between Macs and PCs were largely a thing of the past. I was also under the impression that the whole point of exchanging pdf files was that pdf files are cross-platform compatible. Not only am I am losing tons of valuable time, I may be losing credibility with my clients (especially since I have an IT background). I desperately need to know what version of Acrobat I should be running on my Mac so that when I scan documents into my Mac, the pdf files that are created are completely 100% compatible with both Mac and PC operating systems regardless of what operating system and what version of Acrobat my clients are running. I also need to be sure that those same pdf files I create on my Mac can be seemlessly printed out from either a Mac or PC regardless of the operating system or Acrobat Reader version. If anyone can help me get to the bottom of this, I will be eternally grateful. Thanks.

This file downloaded and works fine for me in Preview on both OS X 10.5.7 and 10.4.11 (and opens in Acrobat Pro 9.1.1 and 8.1.5, and the latest version of Reader on both versions of the OS). As expected.
If you're printing from Acrobat.com by right clicking in the image area and selecting Print, don't. This isn't printing the PDF, it's printing the Flash frame that contains, as you've noticed, buttons and other elements. (Adobe's Mac Flash plugin is notoriously buggy.) Direct your clients to download the file by selecting the download button, not by right clicking and printing.
Again, your PDF file is fine.

HP C309a All in one Printer - Problems with printing documents the correct size.

Hi I recently purchased an HP 309a as a replacement for an EPSON printer which had to be replaced a couple of times so I thought I would change manufacturer.
The HP printer prints well in post places but when I print from Excel on an A4 scale it only prints 3/4 size on an A4 page. I tried everything to get it to print the correct size. I have adjusted the settings to scale to A4, print boderless etc and it just will not print correctly.
It seems to be ok in Word and many other programs so I don't know why there is an issue with Excel. Iam I missing something, please help.
Also is there any way to default the printer to A4 automatically instead of 8" x 11".

I also have issues using this printer with Excel/ Word.
When I am using Excel or Word I have to remove the HP 309a as my default printer.
when set as default, excel and word just "hang" for up to 3 minutes when opening or saving.
I called HP who said the printer works with all other files so basically it's tough. One of their tech guys tried to sort it out but couldn't.
Has anyone else had this same problem? If so, how was it resolved?
£300 for a printer that doesn't work with MS. It's not funny and I won't buy HP product again.

Problem Opening Text Document

Prior to a few days ago, when a friend of mine opened a .pdf attachment sent in an email, the document would open fine. Now when she tries to open a .pdf file, she gets 2 dialog boxes as follows -
Select the encoding that makes your document readable
- Windows Default
- Ms DOS
- Other Encoding
and a second box with the following -
Wang Taiwan
Western Europe (DOS)
Western Europe (IA5)
Western Europe (Windows)
She also gets the following message -
As far as she is aware, she has made no changes to her system to cause this problem. I don't know if this is an Adobe problem, a Windows 7 problem, or something else entirely.
Any help greatly appreciated.
Stew

Check out that thread if you find it helpful. There are some cool ideas there.
Adding a font to pages for Ipad

AdobeX problem - opening/printing documents

Similar Messages

Maybe you are looking for