Adobr Reader XI: document will not print: premium presentation paper

I've had no problems with this before today. Adobe Reader XI gives me an error message that "document will not print". I tried it in draft, plain paper, and it printed, without a problem. I switched browsers, from Google Chrome, redownloaded the document (online labels) into IE8, then tried to reprint as premuim presentation paper, matte, color. Same error message. Yet, as a draft, no problem. I've uninstalled, reinstalled, updated drivers on Epson printer (WF2530), same error message. AShould I do a system restore to two days ago, since this is the last time there was no problem? I print product labels. 

Thanks Atul,
Th problem has recently been resolved when my new technician made some adjustmnents. The problem was not the fault of Acrobat. It goes back to my new high definition IPS monitor several weeks earlier. When using Windows Office 2007 I was seeeing green haloes mainly between letters such as" ll, ii, db" etc. where the vertical lines filled with green. In Adobe Bridge, the variable text in control boxes took on a red colour. My technician (at the time) sought help via the Microsoft Help site and found this was a common problem with professional high definition IPS monitors like my new one. The instructions (4 pages from the Microsoft site)  said to turn off the Clear Text Type and replace the font 'SEGOE' with Tahoma. As the technician workede his way through the steps, I watched as he marked them off as he went so as to ensure the changes were correctly made. This solved the problem but it wasn't until a week later when I tried to print a PDF file that my problems with Acrobat began. The PC was taken to another technican fora "second opinion" and this man fixed the problem within a short time by changing the font back to the Windows default, SEGOE. He may have done something else but when I saw the printer dialog panel on his workbench with no other problems either, I was anxious to try it with my new monitor. No more colour fringing/haloes etc and no further problems with Acrobat However, I was waiting a little longer before informing you of the outcome-just in case it didn't work.
It seems that Microsoft may be incorrect in their 'Fix' advice as the font SEGO may well be required for Acrobat to print a PDF file?
This case may now be closed with thanks for trying to help with a problem that in the end turned out to not your fault
Bob

Similar Messages

  • Canon pixma mx850 printer not reading my computer - will not print

    canon pixma mx850 printer not reading my computer - will not print 
    I unplugged the cord that went from the printer to the computer to another canon printer to see if I could remediate a problem with a wireless printer.
    When I plugged the computer cord back into the usual computer, the printer is no longer talking to the computer even though I have gone in and changed back the settings, and it has been the default printer - that was not changed.
    I've tried all the trouble-shooting suggestions to no avail.

    Hi scheideckerj,
    Reinstalling the latest drivers for the printer from the Canon USA website may resolve the issue you are experiencing.   Please click here to go to the Drivers and Software page for the PIXMA MX850.  Once on the download page, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "DRIVERS" section and click on the MP DRIVERS file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    Once the file is downloaded, please double-click on it to reinstall the printer drivers on your computer. 
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Pdf documents will not print properly

    my imac running 10.5.8 will not print some pdf documents properly.  In particular sheet music will only print as horizontal and vertical lines - the symbols and notes do not print.  The 'print preview' shows all the symbols and notation correctly.
    This occurs in both Adobe Acrobat (v10.1.3) and Preview (v 4.2 - 469.5).
    Printer in use is a HP 2600n connected via USB cable.

    Seems it's not sending the Font to the Printer, or the Font has a conflict & the Printer thinks it's another Font.
    Open Font Book & Validate all Fonts & check for duplicates.

  • One document will not print in color - all other docs are printing fine

    I just purchased an All Ine One Officejet Pro 8630. It will not print my proposal forms in color - although invoices and every other document that requires color seems to print just fine. The proposal form is formatted in in old Microsoft Access file.  Not sure that this would make a difference because I have had no problems with printing it in the past with color.  Any recommendations would be appreciated. Thank you.   

    So when you do print, does it come out in a grey scale with various shades of grey instead of the color or in just solid Black and White format? Also, on the PDF front, you can install either software I mentioned and that will allow you to "Print to a PDF File" and then you can at least view the PDF to see if your printing system from Access is outputing in color or not.  Just a troubleshotting idea.

  • Downloaded Adobe document will not print.  What do In do?

    Downloaded documents, when I bring them up, will not print.  Screen goes gray and "adobe not responding" appears.  What to do?@

    Dave, please try opening the doc in Preview, if successful
    it should print from there.
    Good luck, Tom

  • Photosmart D7560 will not print envelopes - load paper into main tray

    My photosmart d7560 will not print envelopes, after moving the envelope into position for printing, the message "load paper into main tray" is displayed.  It does print the envelope data correctly on a piece of 8.5x11 paper.  Setup is for a #10 envelope.  Envelopes are self sealing.  I have tried creasing the edge better but that didn't help.  I tried a non-self seal (which had a letterhead on it so I couldn't use it for this mailing) and it DID work.  Is there any way to make self seal envelopes work in this printer?
    This question was solved.
    View Solution.

    Do you have the flap folded inside the envelope, so that it does not stick out?
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • My MG5320 will not print. The paper comes out but without printing.

    My MG5320 will not print. Paper comes out but not printing.

    Hi ts and andrea711,
    We recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to appear on the page.  To do this, please follow the steps located at the link below:
    Print Head Cleanings
    If blank pages still come out of the printer after performing the cleanings, please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Adobe Acrobat Pro 9.5.0 will not print SRA3 size paper

    I created an Adobe InDesign file 320x450mm (SRA3) and saved it as a a High Quality PDF. However, when I print from Adobe Acrobat Pro 9 with SRA3 paper size settings, it defaults to A4 and the printer will not register the SRA3 paper size request. The tech from Canon updated the printer driver which increased print dialog options such as Paper Handling, Paper Source etc. (which I didn't have before) and spent over an hour running tests. We both agreed there was a software issue since there were not issues from other software:
    I can print SRA3 files from InDesign and Microsoft Word, but not Adobe Acrobat Pro.
    This is an ongoing problem since I often receive artwork in PDF format at this size.
    My workaround is to place the PDF into InDesign, line up the crops by eye and print to SRA3 paper which works fine until I need to do a double sided print which becomes slightly innacurate and often time consuming.
    Canon printer driver specs:
    V2.0
    iR-ADV C5045/5051 PS (UK)

    What happens if you select other paper sizes? Also ensure that 'choose paper source by PDF page size' is not checked at your print dialog.
    Kindly let us know your results and if possible please forward us your pdf at [email protected]
    Looking forward to help you out.
    Thanks
    -sonal

  • PDF Document will not print on wireless network

    Recently purchased Fujitsu laptop with Vista Home Premium O/S, 2.4 Gig chip, 2 Gig Ram. Printer is Canon Image Class 880 multi-function printer. I am able to print Microsoft Word documents via the wireless network and can also print documents off of the web on the wireless network, except for downloaded PDF files.
    When I try to print a PDF file, the print box will come up and show the correct printer. When I click OK in the print box, a "Progress" dialog box comes up and indicates "preparing" as a percentage of the total document the computer is trying to send to the printer. Then, the box turns grey, and a message comes up saying Adobe Reader had a problem and has shut down. Also, Windows Document Execution Prevention then comes up saying a problem caused the program to stop working correctly.
    I'm not sure which version of Adobe reader came with the computer, but it was upgraded to 8.1.2 on 2/12/08.
    Any helpful ideas will be appreciated.
    Regards,
    Dan Roberts

    Check the support site here.
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
    Make sure you have the firmware update also.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Document will not print correctly

    I have a Photosmart 3210xi All-in-One. Have had it connected to a desktop and everything prints fine. Recently was provided a laptop (Dell Latitude D505). Connected this up to the printer. Tried printing a document. The print preview looks good, but the document when printed does not. It appears (what little I know) to print out the "computereze"--i.e., all the commands, etc. Yesterday, it printed 8 pages of this before I stopped it.
    How do I get it to print the document correctly?

    Hard Reset – While printer is powered ON, pull
    the power cord from the printer then from the
    wall. After 30 seconds reconnect power to
    wall and printer. This will trigger a ‘dirty power
    up’ and restore the printer to a known good
    condition (if it is possible). No user settings
    are lost with a ‘hard reset’.
    This ‘Hard Reset’ is one of the most powerful
    tools to use when the printer hardware is not
    functioning properly!
    if not resolved, uninstall hp software &
    reinstall using latest  hp software from hp
    website.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • My new hp photosmart printer 7510 will not print to photo paper always prints on regular paper tray

    When I set the printer up , it printed a beautifl photo, now when I try to print a picture, I add in the print box 4x6 and photo paper, but it always prints on regular paper. how do I get it to print on the photo paper? I am using winows 7 and it is wireless

    Lets try manually setting to the photo tray:
    - Click the Start orb -> Click Devices/Printers
    - Find and right click your printer -> Click Printer preferences
    - Select the Paper/Quality Tab -> in the "select paper source" choose the photo tray
    - Set the paper size (the next option down) accordingly
    Let us know if it helps or not.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Adobe Reader 9.0 will not print on Macbook Pro with OS X 10.6

    I have the Intel Core 2 Duo processor, and when printing labels or other pdf's, Adobe Reader 9.0 just sits there, doesn't even acknowledge that I am trying to print.  When I open the print queue, it says trying to print, loading data but sits forever.  If I print from Preview and other apps, it works fine, so it's obviously an Adobe issue with the new Macs.  Any suggestions for this non-technical person that just wants to print?  Thanks.

    If you get an error message that you do not have sufficient permissions or have other problems with updating to update then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Large Format Document will not print

    Using Photoshop CS3 On IMac Intel Core Mac OS 10.4.1. Created a large format document using scanned photos and documents. I created a poster 20X40 but when attempting to export the "print" option is greyed out. Saved the document to my desktop, it is a huge file 3.4 GB. Saved it to a CD and took it to Kinkos to be printed. They say it crashed their system and they likewise cannot get it to print and cannot save it to a pdf or any other file. I am new to photoshop and my son set up the document, I just filled it in so not sure what I did wrong. Any suggestions?

    eileen,
    >I have a call into Kinkos on the color their Mac guy is not in.
    You probably don't have to speak with a "Mac guy" as Photoshop files are platform-neutral. Speak to anyone in their "print shop" and ask what their file requirements are for "giant prints".
    In addition to choices of media, mounting options and prices, you want to know:
    Format
    Recommended resolution
    Maximum file size (pixels x pixels and file "weight"), if any
    Color mode
    Any specific "do's and don'ts"
    Neil

  • .jsp files opened in Adobe Reader by Firefox will not print on my HP laserjet

    I have a vendor site that provides me info in .jsp format, which Firefox on my Mac opens in Adobe Reader. When I send this file to my HP 3015 laserjet it starts spooling the file then locks up. I tried creating a .pdf file in Acrobat Pro, but still encountered the same problem. My Firefox, Adobe Reader, Acrobat Pro, and MacOSX (snow leopard) are current. I do NOT encounter the problem with .aspx files. Appreciate any help here! Thanks

    This thread may resolve your issue -
    http://forums.adobe.com/thread/949886?tstart=0
    -vc

  • Hp photosmart all-in-one c 7280 will not print since clearing paper jam

    Had my first paper jam in 2 1/2 years - cleared out the paper but now when trying to print documents they just back up and a check-mark appears by the default printer beside the word "error".   I right click on the printer icon; cancel the backed up documents and the word beside the check-mark changes to "Off-line".   I set the printer to On-line and the word beside the check-mark changes to  "Ready".  
    I then send another document for printing with the above scenario repeating itself.
    I can make copies so am pretty sure the paper jam is cleared.  There's just no response to the Print command.
    Will appreciate any help - john t

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue, specifically the Print Diagnostic Utility.  
    It may also help to reset the printer as described here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Pdf.js breaks pdf functionality with no recourse

    I came into work today and lo and behold, after the obligatory but unwanted and unnecessary monthly update from FireFox, PDF files are behaving very differently: not rendering, freezing up, not returning search results, etc. So after spending a half

  • Retrieve processed message payload from database

    Hi, We need to retrieve the payload of all the messages which have been processed in last 1 month. We do not have the message archiving configured currently. Could you please let us know how can i retrieve the payload? We can not do it manually as th

  • How can a dangling network stream endpoint be destroyed

    I have a cRIO application that creates a network stream writer endpoint that communicates with a windows hosted app that creates a matching network stream reader endpoint.  I have found that on occasion an error in my software occurs and the rt vi th

  • How to use order by with hierarchical query

    I have a hierarchical query basically it brings back an organization chart. We start with a manager's id, get all that person's employees. If any of the employees is also a manager I want to get that person's employees and return them right after tha

  • Can't play videos on iPhoto after installing Yosemite, also getting JRE error. Are they related?

    When I start Mac, I get following error regarding JRE requirement. I have updated JRE 8 from Oracle website, but I still get the same error. This has started after I updated to Yosemite. Also when I click on video I get following error: "A necessary