Adobre premiere pro CC (version d'évaluation) ne démarre pas

Bonjour,
J'ai téléchargé la version d'évaluation d'adobe première pro, et au démarrage j'ai un message d'erreur me stipulant que Windows a rencontré un prblème lors du démarrage. et le soft ce ferme avant même qu'il n'est pu ce charger completement.
Ma config:
Ordinateur:
Type de système
ACPI x64-based PC
Système d'exploitation
Microsoft Windows 7 Ultimate
Service Pack du système
Service Pack 1
Internet Explorer
9.11.9600.16428
DirectX
DirectX 11.0
Nom du système
STATIONCYRIL-PC
Nom de l'utilisateur
cyril
Domaine de connexion
stationcyril-PC
Date / Heure
2014-01-09 / 20:47
Carte mère:
Type de processeur
DualCore Intel Core 2 Duo, 3166 MHz
Nom de la carte mère
Asus P5K/EPU (2 PCI, 2 PCI-E x1, 2 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN, IEEE-1394)
Chipset de la carte mère
Intel Bearlake P35
Mémoire système
6144 Mo
Type de BIOS
AMI (06/19/08)
Port de communication
Port de communication (COM1)
Moniteur:
Carte vidéo
ATI Radeon HD 4800 Series (1024 Mo)
Carte vidéo
ATI Radeon HD 4800 Series (1024 Mo)
Accélérateur 3D
ATI Radeon HD 4870 (RV770)
Moniteur
Acer E230H [23" LCD] (Q3T080024201)
Multimédia:
Carte audio
ATI RV770/790 - High Definition Audio Controller
Carte audio
Intel 82801IB ICH9 - High Definition Audio Controller [A-2]
Stockage:
Contrôleur IDE
Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 1 - 2921
Contrôleur IDE
Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926
Contrôleur de stockage
Generic Marvell 61xx RAID Controller
Lecteur de disquettes
Lecteur de disquettes
Disque dur
Datafab MULTI READER USB Device
Disque dur
Datafab MULTI READER USB Device
Disque dur
Datafab MULTI READER USB Device
Disque dur
WDC WD5000AAKX-221CA1 ATA Device
Lecteur optique
_NEC DVD_RW ND-3540A SCSI CdRom Device (DVD+R9:8x, DVD-R9:4x, DVD+RW:16x/8x, DVD-RW:16x/6x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW)
Lecteur optique
HL-DT-ST DVD-ROM GDR8164B SCSI CdRom Device (16x/52x DVD-ROM)
État des disques durs SMART
Inconnu
Que dois-je faire ?
Merci

Bonjour,
J'ai une seul carte graphique je ne sait pas pourquoi le rapport en fait apparaitre 2 !!!???? le pilote instalé est le dernier trouvé sur le site AMD :
Catalyst Software Suite
153 MB
13.9
10/15/2013
et lemessage d'erreur est : "Adobe Premiere pro CC à céssé de fonctionner. un problème a fait que le programme a cessé de fonctionner correctement. windows va fermer ce programme et vous indiquer si une solution est disponible."
Bien sur il ne m'indique rien.
J'ai ragouté de la ram je suis passé a 8G
Par contre dans un rapport plus complet il est indiqué que la carte vidéo n'est pas que un port PCIex x16 mais sur celui X1 !!! alors que phisiquement elle est bien sur le slot bleu indiqué PCIex X16 !!!???? je comprend pas comment c'est possible ?
si elle est sur un port X1 c'est normal que ça ne démarre pas ?
Cyril

Similar Messages

Why can't I download premiere pro try version?

why can't I download premiere pro try version?

Hi Gonzalito,
Thanks for posting on Adobe forums,
Please check the system requirements here http://www.adobe.com/in/products/premiere/tech-specs.html
Regards,
Sandeep

Premiere Pro CS5 version 5.0.0 freeze on startup screen

MacPro4,1 Quad-Core Intel Xeon
Processor Speed: 2.26 GHz
Number of Processors: 2
Total Number of Cores: 8
MacOSX 10.7.5
L2 Cache (per Core): 256 KB
L3 Cache (per Processor): 8 MB
Memory 26 GB 1066 MHz DDR3 ECC
Graphics ATI Radeon HD 4870 512 MB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: MP41.0081.B08
Premiere Pro CS5 version 5.0.0
When starting app, the splash screen shows the items that are loading.
when it gets to 'loading exported quicktimehost.bundle.' It stops and freezes every time.
I can't get past this point. All i can do is force quit.
Premiere Pro CS5 loads fine only MacBookPro.
Any help is appreciated.
Paul

Thanks for your prompt reply, John-- and for NOT simply advising me to spend my kid's tuition on more of your company's products...
Actually, I had tried the "Run as Administrator" option already, having found it in one of those other threads;
there was no change in the sequence described above.
I decided to try another possible solution which I read about in one of those other threads: opening Premiere from a different account.
Incredibly, it WORKED-- sort of...
I got a couple of popups advising me that missing codecs had to be installed-- and upon completion, Premiere opened!
Here's an interesting note: the last file to load was still "SolidComposite.AEX"-- and the "White Screen" I kept seeing was Premiere opening normally. The next thing that displayed was the normal dialog box "Open/New Project"-- I entered a new project name, and Premiere started normally. I even added a few video files as a test... all opened normally.
I returned to the Admin account to see if the fix was in here, too;
but clearly the war wasn't over, over here...
It now appears that some personal setting in the Admin account is causing Premiere to close itself;
I've been reading about the layered security measures embedded into Windows 8-- I'm suspecting the conflict lies there...
I ran the Windows Troubleshooter & got this:
both MS & Adobe confirm that CS3 is fully compatible--here's my sytem info:
Since I seem to have established a fall-back position that lets me use Premiere, my crisis becomes a mere conundrum;
but I know this is gonna gnaw at me anyway, & I'm hoping that this new information might suggest further troubleshooting options to someone who understands the Adobe software and/or the Windows software better than I do!
Speaking as someone who has found many solutions on forums like this over the years, I assure you:
for every person whose post you reply to, there are many more whom you will never know you have helped!!!

Where can I download free premiere pro trial version with analyse function

where can I download free premiere pro trial version with analyse function

Here you can download previous versions;
Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Or when you are on the Cloud:
Adobe Premiere Pro Help | Speech analysis

Hanging application Adobe Premiere Pro.exe, version 1.5.0.0, hang module hu

I do not know what to do, Premiere1.5 is freezing and I look at Event Viewer at Application error and this is what I see.
Hanging application Adobe Premiere Pro.exe, version 1.5.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

I assume that this app hang is a recent development. Is that correct? What has changed on your system, since it last ran well? Any new hardware, or software? Anything with VST plug-ins? Any trial of any Audio editing programs, or maybe Native Instruments? I do not have PrPro 1.5, so this might be different, but, as the program loads, there is a little line of text, below the Adobe Logo. It's small, and goes by pretty quickly. If you get that, look closely and try to see what the last line of text is, before the program hangs. It is likely that the last line will tell you what PrPro is trying to load. Might give you a clue. It could also be whatever the "next" .dll, or whatever, that is causing your problem. Still, you'll have some place to start looking. Unfortunately, the hungapp messages do not yield much useful data, if at all. Do you get a link on the Event Viewer's error message box? Sometimes, those links actually provide useful info, though not as often as I'd like.
Good luck,
Hunt

Hi, I can't install premiere pro trial version, probably because my Windows 7 is a 32bits edition. Is there any solution or 32b version of Premiere Pro to download?

Hi,
I can't install premiere pro trial version, probably because my Windows 7 is a 32bits (x86) edition. Is there any solution or 32b version of Premiere Pro to download?

I am sorry , there is no 32 bit version for both Premiere pro cc as well as After Effects cc
You may try CS 4 version , but it is not completely tested with Windows 7 OS. .

I'm have problems Importing with the Adobe Premiere Pro (original version upgrade

Hi all. I’m having a similar problem that I've seen posted on here but I have Adobe Premiere Pro (the first version upgrade.) I upgraded it from Premiere 5.0. Every time I try to import some Mpeg files to edit, it freezes up and crashes. I’m wondering if someone could help me. My computer specs are below:
(1) Mini-Tower mATX Chassis w/300W PS 865G Motherboard
(1) Windows XP Professional Edition with Service Pack 2
(1) Intel Pentium 4 Processor 3.2 GHz 512K 800FSB w/ HT
(1) DDR333 PC2700 Non-ECC Memory sticks (512MB x 2 and two one gigs)
(1) 120GB Ultra ATA (7200rpm) Hard Drive
(1) GeForce 4 Ti4200-8x 128MB AGP Card w/ TV-Out
Thanks,
Peter
[email protected]

Thank you Eddy. I appreciate all the help and feedback I get from the website.
Also, someone suggested I convert the Mpegs to AVI files first. What do you know about AVS Video Remaker download to use to convert it???
Thanks and Regards,
Peter Adija
Office: (704) 631-5418
Cell: (704) 315-4946
Date: Mon, 8 Jun 2009 15:20:10 -0600
From: [email protected]
To: [email protected]
Subject: I'm have problems Importing with the Adobe Premiere Pro (original version upgrade
Welcome to the forums.
Thanks for providing some of your hardware details.
Please provide http://ppro.wikia.com/wiki/Troubleshooting to help us help you.
Cheers
Eddie
>

Why can't I download Adobre Premiere Pro CC [Trial version]?

Hello, I have been trying to download the trial version of Adobe Premiere Pro CC. However, when I click onthe download button and the Creative Cloud window appears, Premiere is nowhere to be found. THe only application present in the Audio/Video section are Audition, Photoshop and Prelude.
I need this trial version quite urgently for a project.
Thank you.

Hi CarlaNGG
Thanks for posting on Adobe forums,
Please check if you have 64 bit OS installed on the system;
http://www.adobe.com/in/products/premiere/tech-specs.html
Regards,
Sandeep

Video doesn't play in CS4 Premiere Pro trial version

I have just installed the trial version of Premiere Pro CS4 and for some reason none of the types of vidoes I import work. I have tried AVI from a miniDV camera which I have used and edited before on Premiere pro 1.5. It only seems to show the first frama of the track in some random colour and bits of the picture are missing. The computer is running Vista and has all the requirements to run CS4 so why is it not working?

Come on I could really use some help here! Anyone with an idea would help.

Premiere pro trial version

when using premiere pro trial do I need to be always connected to internet?

With the Perpetual License version of CS6, no.
CS6 Trial Downloads (Not Creative Cloud Subscription)
http://forums.adobe.com/message/5649304#5649304
Perpetual License version - no subscription necessary.
Fully functional 30 day trial, after installation run: Help > Updates...
CS6 - Buy the Perpetual License version
(Not Creative Cloud rental)
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ
To buy an upgrade instead the of full version, click the buy button
then select 'I want to buy: 'Upgrade' instead of 'Full'.
CS5 and CS5.5 Products are eligible for upgrade to CS6.

Premiere Pro CS3 (Version 3.0) will not start following upgrade to Windows 8-- rest of CS3 is fine

Recently upgraded from Windows 7 Ultimate to Windows 8 Pro;
next time I tried to open Premiere Pro 3.0 (Adobe Master Collection CS3), splash screen scrolled normally through files being loaded until "SolidComposite.AEX", where it white-screened & crashed.
Tried removing that file, it crashed on the next ".AEX" file; removed all ".AEX" files, it began crashing on ".dll" files;
kept removing THEM, just for the heck of it, until the software loader couldn't even start.
I popped in the CS3 disc to repair the installation-- on the entire suite, for good measure;
re-booted & started Premiere-- crashed at the exact same point.
Uninstalled and then re-installed Premiere-- the entire suite in fact, since there are so many common processes;
couple of hours later, re-booted & started Premiere-- same exact thing at the same exact point.
I found this same problem in at least a half-dozen threads, going back to '07--
and several of them even mentioned the same exact file as the trigger for the crash!
Unfortunately, not one of those threads has ever ended with an accurate diagnosis of the problem,
nor a solution more insightful than reinstalling both the CS & the OS.
I don't want to abandon Windows 8...
but on the other hand, I just can't afford to pony up another grand to upgrade the CS Suite again, either...
Besides: CS3 is everything I need, and it has worked wo well for so long--
even now, Premiere Pro is the only software in the suite with a problem!!
(I used Photoshop to create the above screencap)
So I'm hoping against hope that one of you techno-gurus may have come across this ITRW--
and actually SOLVED IT!!

Thanks for your prompt reply, John-- and for NOT simply advising me to spend my kid's tuition on more of your company's products...
Actually, I had tried the "Run as Administrator" option already, having found it in one of those other threads;
there was no change in the sequence described above.
I decided to try another possible solution which I read about in one of those other threads: opening Premiere from a different account.
Incredibly, it WORKED-- sort of...
I got a couple of popups advising me that missing codecs had to be installed-- and upon completion, Premiere opened!
Here's an interesting note: the last file to load was still "SolidComposite.AEX"-- and the "White Screen" I kept seeing was Premiere opening normally. The next thing that displayed was the normal dialog box "Open/New Project"-- I entered a new project name, and Premiere started normally. I even added a few video files as a test... all opened normally.
I returned to the Admin account to see if the fix was in here, too;
but clearly the war wasn't over, over here...
It now appears that some personal setting in the Admin account is causing Premiere to close itself;
I've been reading about the layered security measures embedded into Windows 8-- I'm suspecting the conflict lies there...
I ran the Windows Troubleshooter & got this:
both MS & Adobe confirm that CS3 is fully compatible--here's my sytem info:
Since I seem to have established a fall-back position that lets me use Premiere, my crisis becomes a mere conundrum;
but I know this is gonna gnaw at me anyway, & I'm hoping that this new information might suggest further troubleshooting options to someone who understands the Adobe software and/or the Windows software better than I do!
Speaking as someone who has found many solutions on forums like this over the years, I assure you:
for every person whose post you reply to, there are many more whom you will never know you have helped!!!

Importing MVK files into Premiere Pro (all versions)

Dear folks,
I see the old topic was locked (probably because it got WAY out of hand, OT and flameworthy) and I have no interest in adding fuel to the fire but I do want to bring light and a solution that I've been using for a while with great success (I thought I'd share here because I was asked by someone on another forum who directed me to the old thread here when I answered them).
(And while I do NOT want to inflame anyone, let's just say that even us retired pros run into a need to edit MKV files from time to time and while I don't think Adobe needs to add this import format I do think people should know how to do it). In my own case our animated television series is produced in an electronic distribution format (we're bypassing media entirely) and MKV works best for the folks who play our stuff. But rather than have to re-render our older stuff when we want to do a bottle show, or other such reuse (like "Previously on..."), I find it's just easier to take the completed shows (in MKV format) and use them in PP (6.0 at the moment but this works in all versions).
The answer is actually IN that old thread, albeit fairly buried -- you just need to demux the MKV container and then remux again in a TS one. There are two pretty great freeware programs that can do this -- MKVExtract (for the demuxing) and tsMuxer (for the muxing). They are virus and adware free, have been around for years, and can be gotten from reliable places (avoid the disreputable ones, though -- they should be ZIP not EXE files).
MKVExtract is part of the larger MKVToolset and you'll need the whole thing to get the GUI part of it (it's actually MKVExtractGUI that runs the executable). MKVMerge is also part of that toolset in case you want to create MKV files, as we do, from almost anything. tsMuxer can create MT2S files as tell as TS, and it can also demux a variety of formats (not MKV though, or you could use it alone).
Because we're just muxing and remuxing there is no additional codec loss -- naturally that's the biggest consideration when trying to re-edit stuff like this. For the highest quality, of course, you always want to remain with original source when you can (although I actually like some of the artifacts that get introduced sometimes -- I often think that maybe the biggest issue with going completely digital is the lack of, well, old timeyness. Then again, I'm an old guy myself).

Good points. I actually have two NAS that i sync that are in remote locations. I am an advocate, and have to keep reminding people that RAID systems are for redundancy and offer *zero* backup of any sort...
They are each 4 bay with 12TB of space, and I am running out very rapidly... but yes, dirt cheap relatively.
I just don't like having two versions of a file... it's messy. I'm not OCD, but I have been through this...
I actually do this for music. I have a flac file for my squeezebox network, and mp3 files for mp3 players.
keeping them both up to date, ripping twice, explaining to the wife how to add her latest CD to both, and then how to copy to her MP3 player... i just don't want to go there again
As I create temporary folders for projects, and mkv -> TS is lossless, I think i will use tsMuxer to decode, use premier, then delete all files once I am finished...
This is all complicated by MOV files that are invalid, MOD files from my JVC, and two types of MP4 from another camera, and our phones, so I want to drop files in a folder, have them processed, and be done with it. then use those files for editing where I choose to.
sorry to Hijack your thread!
BTW: tsMuxer, I checked the audio / video sync and seems perfect from watching lips moving. I have experienced problems before with AVS, freemake and others, so tsMuxer may work well on it's own for me!
Thanks again!

CS5 Premiere Pro Trial Version

How am I supposed to evaluate AVCHD editing, rendering, etc. performance if the trial version does not support it? Is there a way to work around this? My camera is the Canon HF100 using the .MTS or .M2TS formats.
Thanks.

Thanks, I agree that CS5 will handle the file format, I'm interested to evaluate performance on my maching. What do you think?
Windows Vista 64
Pentium i7 920 2.66 GHz
6 GB DDR3 RAM
300 GB WD Raptor 10K RPM
(2) 1TB WD 7.2K RPM
850W Thermaltake PS
Radeon HD 4870 X2 2 GB GDDR5 (I know, not Adobe certified for MPE)
What do you think?

Have trouble downloading premiere pro trial version - pls help

I have cs6 design and web suite - I am not on cloud.....
when downloading i get in the middle of it a message telling me that the application manager is corrupt. Any ideas what is wrong?
thanks
Bee

CS6 Trial Download - where can I find it?
http://forums.adobe.com/message/5459679#5459679
CS6 - Buy the Perpetual License version (Not Creative Cloud rental)
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ
To buy an upgrade instead the of full version, click the buy button
then select 'I want to buy: Upgrade' instead of 'Full'.
CS5 and CS5.5 Products are eligible for upgrade to CS6.

Is it possible to install, license and use Photoshop and Premiere Pro (CC versions) in systems permanently disconnected from Internet?

We have military systems without any internet connectivity at all where we would like to use these products. License activation via phone or export/import of license files could possibly be acceptable but not preferred.
Are there any important limitations to be aware of it it can be made to work?

The software needs to have periodic internet access in order to confirm the subscription remains in good standing.

Adobre premiere pro CC (version d'évaluation) ne démarre pas

Similar Messages

Maybe you are looking for