Adopting FMEA functionality in SAP

Dear Friends,
We are using ECC6.00. QM module is also implemented. In Quality management i came to know that in ECC 6.00 we can adopt the functionality of FMEA, control plan,audititng and APQP. Vehemently i serched in this forum and got some of the guides written by Mr. Phani kumar aadvi. Since i am a beginner to start FMEA configuration , the guides are not helping me much. Experts who have used  step by step guide and implemented the same kindly provide the documents for me to configure and use it
Regards,
M.M

It's very difficult to share the step by step process. I suggest go thru the SAP help to understand the tool, then reveiw the current applications used in your company. The SAP tool is developed based on the industry standards so you can map your legacy to SAP very easily.
I agree the white papers posted in sdn are not much helpful. But Please come up with specific issues you come across so that someone can help you.
Thanks,
Ram

Similar Messages

  • FMEA functionality in EHP3

    I would like to know, how can we do FMEA (Failure Mode effect analysis) functionality through SAP. I heard this is newly incorporated in EHP3 for SAP QM module.
    Do we got any study material for that from SAP.
    Thanks,
    Vineeth

    Hello,
    To get more details about what it is included in Enhancement Packages check the following link.
    [http://service.sap.com/erp-ehp|http://service.sap.com/erp-ehp]
    Business Function FMEA is indeed included in ECC 6.0 EHP 3, more info about the business function can be found in the link I have provided you (search under detailed business functions for EHP3).
    Success.
    Wim

  • FMEA / xRCM with SAP PM

    HI,
    I have few questions about using Failure Mode & Impact Analysis & Reliability based maintenance with SAP. They are as below:
    1. SAP provides the FMEA functionality but in QM module - Whether it can be used for SAP PM objects?
    2. I could find the SAP note '1954644 - Meridium Reliability-Based Asset Management for SAP® Solutions - EBS partnership details' but no further dtails on the solution / integration points. Can any one forward me the link to this solution?
    Many thanks

    Hi,
    You are missing/check for completion of some of the steps which are need to see demands from PS in MRS Planning board.
    Create Org unit using transactions PPOME and PPOCE.
    In PPOCE, create postions of the node, create user/person to that position and assign resource under that position.
    In short your Org unit node will have a hierarchy as O_S_P (Organization_Position_Person).
    Then to PP01 and maintain relationship between Org unit and Postion.
    Then  using SA38 and program run the availability transfer report /MRSS/HCM_RPTWFMIF for the resources.
    Then go to transaction /MRSS/PLBOSRV
    Thanks,
    Sudhakar

  • Delta functionality between SAP 4.7 and ECC 6

    Hi All,
    Can anyone please provide me with any documents or links on delta functionality between SAP 4.7 and ECC 6.0 in MM/WM.
    Any information would be helpful.
    Regards
    Prashant

    Hello
    Following are the basic differences as far as MM Module is concerned;
    Pickup list - Batch where-used list display in transaction MB56
    u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
    u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
    u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
    Usability enhancements for transaction MIGO for the posting of goods movements
    u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
    u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
    u2022 User changes the default values in the menu path "Settings -> Default Values."
    u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
    Goods receipt
    Goods issue
    Transfer posting
    Remove from storage
    u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
    New report : display list of invoice documents (MIR5)
    u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
    u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
    u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
    u2022 In the output list, the report shows both posted and held invoices.
    u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
    Requirement prioritizations in materials management
    u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
    u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
    Mass maintenance of outline agreements
    The following two transactions available:
    u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
    u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
    Commitment plan for purchase contracts
    u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
    u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
    u2022 This commitment plan itself can have any number of items.
    u2022 User can define a value and a validity date for each commitment plan item.
    u2022 This enables user to pre plan different values for different periods of time.
    u2022 The software generates an earmarked fund document for a defined commitment plan item.
    u2022 This earmarked funds document can in turn contain several different items with different account assignments.
    u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
    u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
    u2022 Account assignment to a different account assignment object is then no longer allowed.
    Availability check in "Enjoy purchase order and requisition"
    u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
    u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
    To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
    Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
    u2022 Two settings are possible with availability check:
    Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
    Delivery proposal - Full confirmation
    External services: putting service items in the purchase order on hold (changed)
    User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
    Customizing transactions OX18 replaced by view
    The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
    Goods receipt: new movement types in inventory management
    The following new movement types are available in inventory management:
    107: Goods receipt to valuated goods receipt blocked stock
    109: Goods receipt from valuated goods receipt blocked stock
    Prepayment of invoices
    This functionality is characterized as follows:
    u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
    u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
    u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
    u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
    u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
    u2022 When the software posts invoices, it continues to execute the standard checks.
    u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
    u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
    u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
    Purchasing accounting information to the former SAP Business Information Warehouse
    u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
    u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
    Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
    u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
    u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
    u2022 Functionality for report RMMR1MRS is enhanced.
    u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
    u2022 To do so, set the relevant indicator on the initial screen of the report.
    Parking service items
    It is now possible to put service orders without errors or with commitment errors on hold.
    Report MB5B : Stock on Posting Date
    u2022 This Report is available with "Non-Hierarchy" display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
    u2022 This functionality is not available in Release 4.7.
    Stock Transfer Between Storage Locations
    u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
    u2022 As a result of which user can input issuing storage location with supplying plant.
    u2022 Facility of using different delivery types for different issuing storage locations is available.
    u2022 Shipping Point data can also be determined based on the issuing storage location.
    If u want to know more go through the following links
    http://solutionbrowser.erp.sap.fmpmedia.com/
    http://help.sap.com/saphelperp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm_
    https://wiki.sdn.sap.com/wiki/display/ERP6/ERP2005+Upgrade
    check following
    http://help.sap.com/bp_bblibrary/500/html/U40_EN_IN.htm
    for more help check following
    http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
    Go through the following link for the Delta functionality notes
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Regards
    Priyanka.P

  • How can I use Seeburger java functions on SAP XI's user defined functions?

    Hi All,
    As my title implies; how can I use Seeburger java functions on SAP XI's user defined functions?  I've tried searching over the net in tutorials regarding this topic but I failed to find one; can someone provide me information regarding my question? thanks very much.
    best regards,
    Mike

    Hi Mike !
    You should check your documentation about which java classes you need to reference in the "import" section of your UDF. And also deploy the java classes into the java stack or include them as a imported archive in integration repository...it should be stated in the seeburger documentation.
    What kind of functions are you trying to use?
    Regards,
    Matias.

  • Importance of Bounce management functionality in SAP CRM

    Hi All,
    I want to discuss few interesting issues which I have come a cross while doing a setting for bounce management functionality in SAP CRM 7.0
    Before sharing my experience I want to discuss some term related to Bounce email than will discuss about types of bounce emails and cause of the bounce email.The setting of bounce functionality is describing in below link .
    http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/46/3f509215835fa7e10000000a1553f7/content.htm
    In general when a website visitor sigh up they receive email from the company site, the information the site collected saved in the database but It commonly happen some of your email will be undeliever. In marketing term we say it as 'Bounce'. this is the same way happen as when a person give a bank cheque to bank and don't have sufficient money to his/her account the bank people say the cheque got bounce ..
    As we are aware emails are bounce for variety of reason such as.
         - In case the recipient email address is invalid.
         - recipient email address is inactive or closed
         - recipient mailbox is full or mail server have some technical issue etc
    In general all these bounces emails categorize in two category.
    Hard bounce- When email address is not active. example wrong email address, email address de-activated, deleted,or closed
    Soft bounce-  recipient mailbox is full, mail server have some technical issue, Out_of_office is setup .
    Now finally we come to know about the cause of bounce email and types. Now the question arises why this is so important when we have bounce management functionality active in sap crm marketing ? as described in above url.
    suppose that there is a campaigning happening for an product where 3000 person visited it. Now incase 2000 visitors shown interest so have qualified as prospect bases on the information they have provided such as name, address, salary or employment detail.
    After successfully execution of campaign now senior executives create a mailing list for all the prospects in the target group of campaign and sends email to all the users.Now if I say to how many customers really company have reached reached after campaign execution answer will be we can not have the correct fact and figure as there could be some bounce happened.
    Now incase bounce management setting is configure in your CRM system than system will receive inbound e-mails for each bounce.Suppose we have received one thousand bounce emails than we would say actual customer contacted is 1000. this is the correct fact and figure and very much useful for marketing people.
    After than executive could remove email address which were hard bounced and for soft bounce they can use some other channel to contact like telephone calls etc to reach them.
    The correct facts and figures are very much important for marketing strategy and planning and also to know success level of each campaign. Assume a scnario where in day a company launches more than 5 campaign. I feel the importace is transparent now.
    I hope you would find some interest in above blog.
    Thanks
    prem

    HI, Sreedhar
    Check this thread:
    Re: New search help on CRMD_ORDER locator
    Denis.

  • E-mail functionality in SAP BO X1 3.1

    Hi All,
    I have few questions regarding the E-mail functionality in SAP BO X1 3.1
    1)Is there a limitation on size of report in Email within the SAP BO X1 3.1? 
    2)Can you zip reports within SAP BO X1 3.1 ?file type options(?)
    3)Is there an Impact on performance front end/back end if many users are mailing the reports using SAP BO X1 3.1?
    4)How can we restrict users to only email the public folder Reports?
    5)Only people with Scheduling have access to Email Functionality - Are there any other ways we can place restrictions around this?
    Please help in this regard
    Thanks in Advance
    Regards,
    Pavithra P

    Hi Pavithra,
    We can send a report instance (after schedulling) to an email address and not the actual report.
    Adaptive Job Server (Web Intelligence Scheduling and Publishing Service) is used to generate the instance and Destination Job Server is used to deliver that instance to the email address.
    If multiple users are expected to send instances to email concurrently then we could have multiple instances of Destination Job Server.
    As far as I am aware, there is no direct way to zip reports.
    If I am not wrong, the size of attachment would depend on the limitations set at Mail Servers. Your network administrator might help you on this.
    Hope this will help.
    Regards,
    Yuvraj

  • Bank chain functionality in SAP

    Hi,
    If anyone has knowledge as to how to use bank chain functionality in SAP for vendor payment in SAP. Please let me know I will get in touch with more details for my query. This is required when we are making payments to a vendor and there are some intermediary banks involved between our bank and vendors bank. The tcode for setting up bank chain is FIBPU
    Regards,
    Vijay

    Hi,
    Mainly this bank chain is used for giving payments to foreign vendors. Normally house bank will finalise via which bank the payment should be made. But using this bank chain, you can specify this.
    Configuration:
    Create a scenario in IMG under bank chains.
    Here you can maintain your search criteria. If you select Gen.Search (General Search), you should use IMG activity Create General Bank Chain. After maintain this, you need to activate your chain in IMG Activity.
    Then in Easy Access, you can maintain Master data for Bank Chains under Bank accounting. Note, you can define upto 3 intermediary banks for a bank chain.
    Hope this will help you.
    Thanks,
    Krishna..

  • Any report or Table to see orders with BP partner functions  in SAP CRM?

    Hello All,
    Could anyone help me  in getting  the table or any report  for orders with BP partner functions in SAP CRM?
    Would appreciate replying at the earliest.
    Cheers
    Sreedhar

    Hello Bruno,
    Thanks very much.
    It is somehow helpful for my need but  not completly. This is ok when the orders are less in number.
    My requirement is how to check the first name , last name and number for  contact persons in a list of  CRM orders(simply who is the contact person for a list of orders).Let me know for any additional info.
    I would apprecaite if you could help me in getting any other way.
    Cheers
    Sreedhar
    Edited by: sreedharhazari2 on Jun 8, 2010 9:18 AM

  • IS IT POSSIBLE TO CALL FUNCTION IN sap QUERY sq01

    IS IT POSSIBLE TO CALL FUNCTION IN sap QUERY sq01

    Use enhancement project SQUE0001 for background downloads of query data.  Use the 'Private File' option with the query execution.

  • Functionality in SAP to allow you to print multiple copies of a form

    I've been asked by a SD functional team member how to: 
    This is the table and field names for  Number of Messages functionality in SAP which should allow you to print multiple copies of a form at one time.
    Program Name:SAPMV13B
    Screen #:0211
    Transparent Table: NACH
    Field Name: ANZAL
    Data Element: NA_ANZAL
    How do I go about setting up this functionalilty?
    Thanks,
    Laurie

    Hi Laurie,
       There are three possible ways -
       1. Predefined number of copies - You can define number of copies in the print parameters while creating condition record. Ask you functional team member how they are setting up condition records. You have an option to setup print parameters on condition record screen. This is the only option if you are using output determination.
       2. If you have an isolated print program then you can choose to let user enter print parameters by using parameter " DIALOG = ' ' " in "open_form".
       3. If you have an isolated print program and do not want to let user control other print parameters you can take input from user ( or hard code ) number of copies and use that in parameter " OPTIONS " in "open_form".
    Cheers,
    Sanjeev

  • Output determination functionality in SAP QM for certificates

    I did not worked on the output determination functionality in Quality certificates function of SAP. Can someone guide me thru that with a very brief on that subject.
    Thanks
    Vineeth

    hi,
    Output Determination is used to provide the output type for your certificate.
    here few of the parameters like condition type, Sold to party, ship to party , Delievery item category and apllication type against which u want the Quality certificate.
    U need to config all those things  SPRO--> Quality Management-> Quality Certificate---> Output determination and start your config according to ur requirement.
    Regards
    Shailendra Gaur
    SAP-QM

  • Math Functions in SAP

    What are the math functions in SAP?

    Hi,
    This is what u want may be
    Mathematical Functions
    ABAP contains a range of built-in functions that you can use as mathematical expressions, or as part of a mathematical expression:
    [COMPUTE] <n> = <func>( <m> ).
    The blanks between the parentheses and the argument <m> are obligatory. The result of calling the function <func> with the argument <m> is assigned to <n>.
    Functions for all Numeric Data Types
    The following built-in functions work with all three numeric data types (F, I, and P) as arguments.
    Functions for all numeric data types
    Function
    Result
    ABS
    Absolute value of argument.
    SIGN
    Sign of argument:                      1 X > 0
                                                  SIGN( X) = 0 if X = 0
                                                                   -1 X < 0
    CEIL
    Smallest integer value not smaller than the argument.
    FLOOR
    Largest integer value not larger than the argument.
    TRUNC
    Integer part of argument.
    FRAC
    Fraction part of argument.
    The argument of these functions does not have to be a numeric data type. If you choose another type, it is converted to a numeric type. For performance reasons, however, you should use the correct type whenever possible. The functions itself do not have a data type of their own. They do not change the numerical precision of a numerical operation.
    DATA N TYPE P DECIMALS 2.
    DATA M TYPE P DECIMALS 2 VALUE '-5.55'.
    N = ABS( M ).   WRITE:   'ABS:  ', N.
    N = SIGN( M ).  WRITE: / 'SIGN: ', N.
    N = CEIL( M ).  WRITE: / 'CEIL: ', N.
    N = FLOOR( M ). WRITE: / 'FLOOR:', N.
    N = TRUNC( M ). WRITE: / 'TRUNC:', N.
    N = FRAC( M ).  WRITE: / 'FRAC: ', N.
    The output appears as follows:
    ABS:              5.55
    SIGN:             1.00-
    CEIL:             5.00-
    FLOOR:            6.00-
    TRUNC:            5.00-
    FRAC:             0.55-
    DATA: T1(10),
    T2(10) VALUE '-100'.
    T1 = ABS( T2 ).
    WRITE T1.
    This produces the following output:
    100
    Two conversions are performed. First, the contents of field T2 (type C) are converted to type P. Then the system processes the ABS function using the results of the conversion. Then, during the assignment to the type C field T1, the result of the function is converted back to type C.
    Floating-Point Functions
    The following built-in functions work with floating point numbers (data type F) as an argument.
    Functions for floating point data types
    Function
    Meaning
    ACOS, ASIN, ATAN; COS, SIN, TAN
    Trigonometric functions.
    COSH, SINH, TANH
    Hyperbolic functions.
    EXP
    Exponential function with base e (e=2.7182818285).
    LOG
    Natural logarithm with base e.
    LOG10
    Logarithm with base 10.
    SQRT
    Square root.
    For all functions, the normal mathematical constraints apply (for example, square root is only possible for positive numbers). If you fail to observe them, a runtime error occurs.
    The argument of these functions does not have to be a floating point field. If you choose another type, it is converted to type F. The functions themselves have the data type F. This can change the numerical precision of a numerical operation.
    Regards

  • Parcel tracking functionality in SAP

    Hi
         Want some info/ documentation on parcel tracking functionality in SAP.
    thanks in advance
    Koustav

    Hi
    I am not sure what type of parcel tracking functionality you need?
    refer this link
    http://help.sap.com/saphelp_47x200/helpdata/en/e5/29a5b812b511d3b481006094b9b9dd/frameset.htm
    Regards
    Ramakrishna

  • Round functions in SAP

    Hi Experts,
    Can you help me in finding a suitable round function in SAP? I need to round off to 3 decimal places. I used the function module ROUND but it is not very much helpful.
    I have 3 values ex 0.43444567 , 0.0824495 , 0.48310483. The total is 1. But wen i update in transaction Kp46 for Plan value column it takes only 3 decimal places. So if i reduce the above 3 values to 0.434,0.082,0.483 then i get total as 0.999.
    But if i reduce them ( rounding off ) to 0.435,0.083,0.483 i get 1.001. Please help me get a proper solution for this.
    Thanks and Regards,
    Ramya S

    Hi,
    Thanks for your reply. But I need not calculate the sum to update it anywhere. I just want the total to be 1. I just want to reduce them to 3 decimal places and also retaining the the total as 1.
    Thanks,
    Ramya S

Maybe you are looking for