ADP fail to get the information in WebLogic 10.3 version

I have configuration ADP in Enterprise Manager 12c r2 version in linux 64 bit version
and I can successfully get result for the weblogic server 10.3.2 version,but in customer environment they are
spring application running in WebLogic Server 10.3.0 using sun jdk, I can get the pages they access but I can not
get the performance data about these pages, as I using Jrockit, It can get the result.
but if using jrockit,their applcation will down after running some times,so I want to ask does ADP support wls10.3 version and
support sun JDK 1.6.0_14?
Thanks for your reply.

We only monitor SpringBeans from within ADP. If you are looking for page level metrics, I think your best bet would be to deploy Real User Experience Insight (RUEI) on the front-end with Enterprise Manager Cloud Control monitoring the back-end. JVM diagnostics should be configured as that will obviously provide a large degree of your production level diagnostics alongside RUEI, but given that this is a Spring application as opposed to an ADF, SOA, or portal application, ADP probably doesn't make much sense in regards to getting full visiblity into this environment with the exception of the SpringBeans metrics.
Cheers,
Glen

Similar Messages

Failed to get the document information (LO 26315)

Hi,
I have to create an Xcelsius dashboard where I use a Live Office connection based on a WebI-report. The WebI is created on top of a BEx Query.
I need to pass 12 parameters to the WebI-report in orde to get the correct data.
Everything works fine in design-time, but when I want to preview the dashboard, I get the error: Failed to get the document information (LO 26315).
After investigating the issue, I've noticed that everything works fine when the parameters I have to pass, are only created in the WebI-report. But in my case it is a BEx variable that causes the error.
There is no possible way that I can recreate the BEx variable in the Universe (There are restricted key figures, calculated key figures and cell restrictions in the BEx query).
My question: is there a way to pass a parameter from an Xcelsius dashboard to a WebI-report via a Live Office connection to a BEx variable?
Lieven

Fred,
on the SAP Notes Search page on sdn.sap.com, you can enter the note number in a text field at the right side of the page, just above the Search Option part.
Just enter Note 1357924 in that text field and press the blue icon with the arrows next to it. Thiw ill show the corresponding note.
Lieven

Cannot access external data , Failed to get the document information.

Hi All,
In my dashboard there are live office connections which has optional prompts defined in SAP BI. I have bound the cells to these prompts in live office object properties.
There are no errors while refreshing the LO connections from excel sheet.
But when i run that dashboard and give BLANK value for that prompt then it throws the error :
Cannot access external data , Failed to get the document information. (LO 26315).
Reply highly appreciated.
Thanks & Regards,
DJ

Hi Hardik,
I am building a similar solution as yours connecting webi reports to Bex queries and reading the webi data through live office into the dashboards. I am using almost similar versions as yours - BW 7.1 SP5, BO 4.1 SP4, Dashboards and Live Office SP4 versions. I am facing issues setting up the live office connections itself. I create the Live office connections within an excel and when I try to import this excel spreadsheet into my dashboard designer, it runs forever and crashes.
Could you please list out the steps you performed to get the Dashboard to preview live office data? Do you have OLAP connections for BW cubes and created WebI reports using these connections or You created a Universe on top of the Bex Queries?
It would be great if you could share the steps performed.
With respect to your issue, check if the report engine service is running. Do you have any error message details apart from this error?
Thanks.
Regards,
Rohini.

Failed to get the linked token information

Greetings,
I have run command line that executes a vbscript that is giving the following error:
failed to get the linked token information. It may not be available. Error 1312
The script works perfectly and returns a code of zero. The script is running under another account but all that works fine too. I could just ignore that error but I'm curious as to why it is being generated.
Thanks
David Z

Error 1312:
C:\DeploymentShare\Scripts>err 1312
# for decimal 1312 / hex 0x520 :
ERROR_NO_SUCH_LOGON_SESSION winerror.h
# A specified logon session does not exist. It may already
# have been terminated.
Are you accessing any network resources that require credentials?
(I find it funny/suspicious when scripters claim upfront: "The script works perfectly..." :^)
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Explorer error "Failed to retrieve the Information Spaces list." from HANA

I am getting this dumb error "Failed to retrieve the Information Spaces list. // Request timed out" in Explorer's "Manage Spaces" area every time I click on the analytic view listed under my HANA sources of the Explorer. So, my HANA source is visible, and analytic views are visible in Explorer as well, but I cannot get any Information Space created because of the error, and I could not find the error and its causes in Explorer docs.
I already
- upgraded HANA db to Rev 18 (for some reasons I cannot u[grade this system to SPS3 yet) and BIP and Explorer 4.0 are on the latest Patch 8 of SP2.
- configured connection using IDT defined connection,
- restarted servers in CMS already 100s of times.
There is enough free space on the BO server's drive: 33GB. BO is a single server based on Win2008 R2 SP1 with 40GB RAM.
Any ideas what else I can do to get rid of this issue? It is a test server, so I cannot open customer msg to SAP Support.
Thanks,
-Vitaliy

Try increasing the timeout under
..\SAP BusinessObjects\Tomcat6\webapps\explorer\WEB-INF\classes\ default.settings.properties
from
request.timeout=60
to
request.timeout=600

I want to get the information of the attachment without get the whole body

POP3 server:
MimeMultipart mp=(MimeMultipart) message[0].getContent();
int count=mp.getCount();
//the server deliver the whole attachment when I use mp.getCount
Part part=mp.getBodyPart(0);
//when I use getBodyPart the server deliver the whole body too
I just want to get the information of the BodyPart,just like filename.
Some say FetchProfile can do it.But I try it failed.
How could I do this? Thank you!

Using POP3, you can't. It's a limitation of the protocol.

Failed to get printer information

I have a legacy application in C++, now ported to VS 2010. All works fine, except I get an intermittent error. I'm printing a CNiReport to a pdf printer (Win2Pdf). Every so often I get an error dialog pop up with the message "failed to get printer information" and the print fails (no pdf produced). This comes from the CnIReport:rint. Unfortunately I'm trying to run my program unattended and this dialog hangs waiting to be dismissed. If I dismiss the dialog and let the program continue, it does and then may or may not get the same error on the next Print. It fails both if I pass the printer name to Print and if I pass an empty name to make it use the default printer.
Can someone from NI confirm that the dialog is coming from CNiReport:rint and is there anything I can do to stop it? Also, why would it happen only occasionally?
Thanks
Phil reaston

Hey Phil,
Could you post a screen shot of the error dialog?
It is uncharacteristic of NI software to have an error cause a dialog to popup. Typically an error code is returned passed and dealt with in error handling or the execution (compiling, run, etc) failing. so I am inclined to say this error is associated with the printer driver.
Luke W

Gcc 5.1: Failed to get gcc information.

Running vmware workstation 11 and Archlinux with gcc 5.1:
[root@dell-i7-mihamina mrakotomandimby]# vmware-modconfig --console --install-all
Failed to get gcc information.
[root@dell-i7-mihamina mrakotomandimby]#
But gcc is:
[mrakotomandimby@dell-i7-mihamina ~]$ gcc --version
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE
What to do?

Actually, the problem is much more sinister...
I have a better Arch linux debug and resolve thread for this problem:
https://bbs.archlinux.org/viewtopic.php?id=196915
In short, recompiling the kernel using the gcc 4.9 version works.
Problem now, because arch is a rolling release, is gcc 5.1.0 is now in core - and the vmhgfs, while compiling, hard locks the VM. I'm creating another vmware community thread for this one. Will come back and edit this post with link.
EDIT: Here's the thread to track gcc 5.1.0 progress with VMware Tools:
Workstation 11.1, Tools 9.9.2 build-2496486: Not compatible with GCC 5.1.0 on linux (Arch, Debian, Ubuntu, etc)

How to restore deleted playlists to an itouch after syncing with wrong device. Tried to search for device to restore under devices and it completely removed it as a device on itunes. Is there anyway to get the information back?

To start we have several users and devices on our itunes account....Several weeks ago I was using my itouch to create playlists for a few aerobics classes that I teach. Right before I was about to unplug the itouch I got a notification that my itouch was full and didnt have any space left. Since I was done with what I was doing at the time, I unplug my itouch and figured I would delete unwanted songs later to create more room. A week later, I went to sync my itouch into itunes and over the devices it told me that it was named another device and wanted to know if i wanted to sync the information to my itouch I had just plug in. I had never seen this message before in all the other times I had used it, and at the time I didnt realize that it was giving my device the name of another user in my house. Without realizing it itunes started to sync the new information to my itouch. I immediately unplugged the usb cable stopping the process. I then replugged the usb cable in, hoping to get done what I needed to get done on my itouch thinking it might have just been a strange glitch. Also, since I hadn't notice any change on my itouch from the incorrect syncing, I continued to start itunes again. This time it asked me the same question as before "did I want to sync the information from another ipod?". Since I didnt notice any changes before I just let it do the syncing not realizing at the time that it was earsing all the info I had on my itouch and replacing it with info coming from the other users ipod.
I contacted Apple and they gave me infomation on how I could go look for my itouch under devices and get the information back. When I did this my itouch was no longer there under the devices and it was replaced with the new name that itunes had given my itouch. This device is one of the first generation itouches and has never been backed up that I know of... So my question to you all is...Is there any way of getting my playlists back???? I spend countless hours creating these playlists for my classes and have been completely out of my mind trying to figure out how I can possibly get the infomation back. Please let me know if you think there might be a way to do this!!!

The devices that are listed are: 2 under the name of the device that synced incorrectly with mine and then 3 others that are not associated with my itouch. The name of the ipod, before the incorrect sycning is no longer under devices. It has been replaced with the incorrect one because I can see the serial # of my ipod under the wrong name.
The playlists that are in my itunes library are from an ipod that I used a few times before I took this one over... Which happens to be the ipod that took on the ID of my itouch.
Both of these ipods used to be my kids.. I used my sons a few times and then switched to my daughters. They each had their names attachted to their particular devices and now it just says my sons, which is the ipod that itunes was connecting to when all this happened. The really strange thing is my son doesnt use his ipod any longer and now uses his phone for music...So, it had been a while since that particular device was even synced to itunes!
I hope this helps!

HT5622 I changed my Apple password and I get the information at the wrong email address. The correct email shows in my Apple account. Why is the mail going to the wrong email? How do I fix it?

I changed my Apple password and I get the information back at the wrong email address. My email address is right under my Apple ID. How do I get this corrected?

AWDunams wrote:
Okay so I associate the e-mail address as the apple ID and that seems to be a wrong assumption. I did go to my Apple ID and changes the e-mail address and the password but for the same and only Apple account I have ...
That is good. In that case, your one and only account has not changed, just the login credentials you use for it. All your previous purchases will remain associated with that account, and the new login.
In essence, an AppleID is an email, but it has two parts. One is the login email address and password everyone traditionally thinks of as an AppleID. But that in turn is linked to an account with Apple. As long as you use the manage Apple ID portal to just change the email address and/or password for your exisiting AppleID, then the internal account tracks along with those changes as well.
However, on your iOS devices, you will need to log out and then log back in with the new login credentials:
settings -> iTunes & App Stores - tap your AppleID, and choose log out. Then log back in with the new email address and new password.

BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups

Dear all
        In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message:
       " Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
      Anyone has encountered similar issue?
   BO version: BO XI 3.1 SP5
   Authenticate: Windows AD
Thanks and Regards

Please get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
http://service.sap.com/sap/support/notes/1323391
http://service.sap.com/sap/support/notes/1199995
-Ambarish-

Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?

Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?

No. You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103501)

I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

First, back up your old iphone manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your old phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved: http://support.apple.com/kb/HT1766
How to back up and restore: http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
After that, connect your new phone and let iTunes set it up. iTunes will detect the old 3G backup and ask you, if you want to use it to restore the info on your new iphone. If you agree, all settings and data will be present after the process is finished.
This is also explained in this article: http://support.apple.com/kb/HT4137

Getting the information from a harddrive

My mother board burned up, so I had to buy a new computer,(tower only), however I havre lots of my business information on my old hard drive, which I did have a friend remoce from my old tower. When I called Staples to ask about buying a box to place the the hard drive in, so that it could be connected to my computer, the person on the phone said I would probably not be able to access the information on said hard drive. After reading the posts here, it seems to me that I should be able to access the information. Can I get the information on the harddrive onto a thumb drive?

You just need an enclosure. I'm guessing it's out of a desktop, and IDE interface. You need this.
If it's a SATA interface, you need this.

Is it possible to get the information from the complete forms send to different email account

When i have a paid account is it than possible to get the information from the different forms send to seperate emailaddresses.
Who dont have a account from formscentral but just need the information directly in there own inboxes?
Because we're looking for a good and simple way to make qoustion & complain forms. But these need to go to different people in the company.

You can have notifications sent to multiple email addresses, but each will need to have a FormsCentral account. They can be free accounts. What you do is create your form and set up the email addresses that you want the information to go to to be Co-authors or Contributors. The co-author/contributor accounts will then need to log into FormsCentral, go to the Options tab and check the email notifications checkbox.
I hope this helps.
-Jeff

ADP fail to get the information in WebLogic 10.3 version

Similar Messages

Maybe you are looking for