ADP has got only UID's in Mappings - What's on ?

Hi,
in ADP Mappings with Querries as a Datasource,
I can see only the UID's of the KeyFigures and IO's.
Anybody arround has an idea how to change - what's wrong ?
Thanks, this will help a lot .
Martin

The problem is:
The keyfigures in the destination Object /
DSO seem to be shifted after the transformation.
The problem occurs when:
- the characteristis or key figure in Bex is set to undisplay
OR / AND
- the mapping in APD is not set
The solution is:
- setting all characteristics in BEX to Display
AND / OR
- mapping all characteristics and key figures in ADP Mapping and if not possible, setting destination characteristics or key figure to ADP Mapping INITIAL
Best
Martin

Similar Messages

My ipad2 has stopped charging. Have replaced cable and adaptor without any help. Looks the internal dock connector has got damaged. What do i do? Its only 18 months old.

My ipad 2 is 18 months old and has stopped charging. Have reolaced cable and adaptor without any help. Looks internal dock connector has got damaged. What is the solution.

It'll be an out of warranty replacement since accidental damage isnt' covered by the factory warranty.
http://www.apple.com/support/ipad/
contact support and make an appointment at your local apple store. The out of warranty replacement fee for an iPad 2 starts at 249 and goes up. So another option for you may be if your money is better invested in a new device that will have a longer life.

How to Create a datatype for a storeprocedure which has got array ?

Hi All,
Please tell me how to create a datatype for a storeprocedure which has got an array structure ?
Thanks,
Sindhu.

Hi Sindhu.
You would have to use a JDBC Cursor for this but it's possible only Output parameters, not Input parameters.
It's describle in a help link:
Defining an EXECUTE Statement http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7b72b2fde93673e10000000a114a6b/frameset.htm
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output), CLOB (input and output), CURSOR (output; only in connection with the Oracle JDBC driver)
I think you can execute your StoreProcedure many times depends of array occurs.
Regards.
Bruno.

I am using a iPhone 6 but it has got red screen

I am using a iPhone 6 but it has got red screen. Pls suggest to fix it.

Hello sarzinafromnew york,
Thanks for using Apple Support Communities.
To help resolve this issue where you only see a red screen on your iPhone, please follow the steps outlined below.
Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
Reset your device while it's plugged in.
If resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
Have a good one,
Alex H.

Retrieval of Mail Id's present in Distribution lists which has got deleted!

Hi All,
We are facing a problem regarding the deletion of distribution lists (reason not known) and they were retrieved from the trash folder in SBWP (SAP Business Work Place - the SAP inbox). But there was no trace to go back and look who deleted it and what all distribution lists were deleted. We can retrieve only when something is there in the trash folder. If not in trash folder, then itu2019s gone forever and we cannot retrieve.
So we have implemented two OSS notes. Now we are able to get the details i.e. the name of the distribution list as well as who has deleted it.
Now we need to find the mail Idu2019s present in distribution lists which has got deleted.
We have done some analysis but not able to do this.
So can anybody provide needful information.
Regards,
Sagar.

I also face the same problem: distribution list got deleted(reason unknown), you mentioned that you implemented 2 OSS note, can you kindly let me know what are the 2 OSS notes implemented?

IPad one nearly 3 years old has got very slow - ideas?

My iPad will be three years old in June. In the last few weeks it has got very slow - sometimes apps take ages to respond and have to be touched several times - the same with scrolling and in fact any touch control. Even then it is slow to load things.
It is a 64 gb which is only just over half full so I don't think it is because there isn't much memory.
Any ideas?

Try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
Memory overloads can cause slow down and reboot clears those.

HT1349 My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode window appears when I try to restart the device. But, there is no response when I try to type in my code. How can I revive the de

My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode screen appears when I restart the device. But, does not respond to typing. How can I revive the device?
The device was synced to icloud some time ago. The Laptop PC I normally use with the device is not with me now and is being formatted for a different reason.

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Hyy i m using ipad and i want to upgrade it to latest os update 8 but when i tried to update it got updated only to 5.1.1 what should i do to get further update??

hyy i m using ipad and i want to upgrade it to latest os update 8 but when i tried to update it got updated only to 5.1.1 what should i do to get further update??

If your iPad has no front or back cameras, then you have an original iPad 1.
The original iPad 1 cannot be upgraded any further than iOS 5.1.1.
Sorry.

Iphone4 often has got no reception with 3G signal

iphone4 often has got no reception with 3G and it display “No Service”. The situation happened probability in OS 4.2 than OS 4.1.
Message was edited by: Yisin

Yeah, my phone edge/gprs signal drops only with 3g enabled

My mac book pro has got 41 GB of other stuff on it clogging it up how do I find out what is rubbish and delete it

my mac book pro has got 41 GB of other stuff on it clogging it up how do I find out what is rubbish and delete it. To free up some memory. I can't believe I have filled it up intentionally.

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space. Do the same in other applications, such as Aperture, that have an internal Trash feature.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

There has GOT to be a way to sync Entourage on one mac with Entourage on...

There has GOT to be a way to sync Entourage on one mac with Entourage on another mac! So far, the only way I can find to keep my mail synced on two macs using Entourage is to kill the Daemon on one machine and copy over the contents of the Microsoft directory to the other machine, but this is NOT a sync, it's a replacement. This will not work if email has been exchanged on both machines before the copy can be done. So what are we supposed to do? Thx for any help on this perplexing problem.
coocoo

Wait, I'm confused. Chronosync is just a fancy filecopy no? I think i tried it once moons ago just for folder syncing. it worked, but i did not see much advantage of that over just dragging the files. It still won't sync the individual emails right? (ie. add new, leave old alone). But u say using an imap server will help there? I don't even know what that is, but I guess I can install it on one of my macs right? Or do I have to pay to subscribe to one (like mac.com or whatever that thing is)? not an option here in Nepal. Well thanks for ur help so far!

Whether the fields of a single row in an internal table has got value.

I am doing an archiving report in PS Module.
The table RPSCO has 12 fields which represent each month.The records in the table are based on OBJNR and YEAR
Now i need to check for the latest year which month has some value .If any of the month has got some value i need to take that month.
Sample table given below.
OBJNR           year    Month1    month2      month3    so on
1)PR00002409 2006     0.00     0.00     664.70-     0.00 0.00     0.00     0.00     0.00     0.00
0.00     0.00     0.00     0.00
2)PR00002409 2005     0.00     0.00     0.00     0.00     0.00     0.00     0.00 0.00     0.00     0.00     48.70     127.20     0.00
In this case the output should be Month3.Because the latest year is 2006 and Month is Month3.

Hi Susmita,
You have to use DO VARYING option from field 3 onwards.
Below is the sample program to check whether the field has a value or not.
tables: rpsco.
data: it_rpsco like rpsco occurs 0 with header line.
data: v_wlp type rpsco-wlp00,
      v_wtp type rpsco-wtp00,
      v_pos type i.
select * from rpsco into table it_rpsco where gjahr = '2007'.
if lines( it_rpsco ) gt 0.
loop at it_rpsco.
clear v_pos.
do 16 times varying v_wlp from it_rpsco-wlp00 next it_rpsco-wlp01
              varying v_wtp from it_rpsco-wtp00 next it_rpsco-wtp01.
   v_pos = v_pos + 1.
   if not v_wlp is initial.
     write:/5 v_pos , 35 v_wlp, 70 v_wtp.
     exit.
   endif.
enddo.
endloop.
endif.
Regards,
Kumar Bandanadham
Edited by: Velangini Showry Maria Kumar Bandanadham on Jun 1, 2009 9:30 AM

Hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again. You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589. This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process.

I want to change my country ,when i 'm going to change my country they say first you need to finish your balance in italy but i ve got only 15 cents and there is no app for 15 cents ,How can i change my account country ? help

My account is in italy and i ve got 15 cents left ,now i moved to london and i need to download barclays mobile app for my phone but when um going to change my country in my account to uk its says 1 st u ve to finish your balance but i ve got only 15 cents and there is no app for me to buy for 15 cents .so will some
help me thank you ?

Click here and request assistance.
(89404)

I had a USA itunes card in my account and now I have shifted to the UK, I would like to shift my account and change my itunes store to the UK based store but cant do it as itunes card has got some credit left about $1.30. Please help

I had a USA itunes card in my account and now I have shifted to the UK, I would like to shift my account and change my itunes store to the UK based store but cant do it as itunes card has got some credit left about $1.30. Please help.

You can try contacting iTunes Support and ask them if they can remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

ADP has got only UID's in Mappings - What's on ?

Similar Messages

Maybe you are looking for