Adprep encountered a Win32 error

2008 R2 , when i type CMD command i will get below eror,Adprep encountered a Win32 error. Eror code 0*2095 ple advice ..?

Hi,
In addition, if the user account you are using is a member of many nested groups, the problem may occur due to token size. In this case, you may choose to create a new account in Active Directory Users and computers, make the new account a member of the
Domain Admins, Enterprise Admins, and Schema Admin groups only, logon to the Schema Master as that account and rerun the Adprep /ForestPrep command.
More information for you:
Troubleshooting ADPREP Errors
http://blogs.technet.com/b/askds/archive/2008/12/15/troubleshooting-adprep-errors.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Adprep encountered a Win32 error. Error code: 0x6ba Error message: The RPC server is unavailable.

I managed to resolve this issue myself but I would like to put the knowledge out there
I got the above error when joining a 2012 R2 Standard server to a 2003 Domain.
I found the following article which pointed me in the right direction, but didn't resolve it for me
http://support.microsoft.com/kb/2737560
I verified that my NEtwork Service was properly configured to LogonAsAService
However, when I opened Windows Firewall it told me that IPNAT was using the network, so it couldn't be configured
I removed the Routing and Remote Access COnfiguration from my Domain Controller, and that allowed me to access the RPC server

Hi,
Thank you for your sharing!
Your post is very beneficial to other people who have similar issues.
Best Regards,
Amy

Adobe Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows The Akamai Download Manager has encountered an fatal error: File not found.

I am trying to download the trial of PSE 13 which consists of two files. The first downloads ok but on the second I get this message:
Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows
The Akamai Download Manager has encountered an fatal error: File not found.
Same thing happens if I try to download the files individually and also in different browsers. Any ideas?

Me three. I have been trying for hours, and have used three different browsers.
I have just noticed that the URL it is trying to use is looking for ...win32.exe under a directory called win64. That sounds like a stupid typo mistake. I manually modified the URL to this instead (and it downloaded something)...
http://trials3.adobe.com/AdobeProducts/PSE/13/win32/PhotoshopElements_13_LS25_win32.exe
Now I just need to figure out how to install the product manually using the two downloaded files!?!

The server encountered an internal error that prevented it from fulfilling

Hi members!
I am new member of Java EE. When running my the following practice:
1) file: hello.xhtml*
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:h="http://java.sun.com/jsf/html">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Insert title here</title>
</head>
<body>
Hello <h:outputText value="#{foo.subject}"></h:outputText>!
</body>
</html>
*2) file: web.xml*
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID"
version="2.5">
<display-name>Hello</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>JSF</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>JSF</servlet-name>
<url-pattern>/faces/***</url-pattern>
</servlet-mapping>
</web-app>
*3) file: faces-config.xml
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd"
version="2.0">
</faces-config>
4) file: GreetingService.java
package hello;
import javax.annotation.Named;
import javax.context.RequestScoped;
@Named("foo")
@RequestScoped
public class GreetingService {
public String getSubject(){
return "Paul";
5) file: beans.xml
<?xml version="1.0" encoding="UTF-8"?>
At browser: http://localhost:8080/Hello/faces/hello.xhtml
Had the following errors:
The server encountered an internal error () that prevented it from fulfilling
this request.
*例外*
java.lang.NullPointerException
org.jboss.webbeans.servlet.WebBeansListener.getLifecycle(WebBeansListener.java:53)
org.jboss.webbeans.servlet.WebBeansListener.requestInitialized(WebBeansListener.java:108)
org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:190)
org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:92)
org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829)
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598)
org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
java.lang.Thread.run(Unknown Source)
My computer is the following configuration:
jre-6u12-windows-i586-p
jdk-6u12-windows-i586-p
jboss-5.1.0.GA
mojarra-2.0.1-FCS-binary
eclipse-jee-ganymede-SR2-win32
Please teache me to know where is cause.
Thank you very much!

perhaps it is not a good idea to use JSF 2.0 with JBoss 5.1; it was built to support JSF 1.2 only.

ITunes 9.1.1 - "Encountered an unexpected error and has to close"

Hi I downloaded the latest iTunes upgrade and ever since I've been having problems.
iTunes will be fine until I sync my brand new iPod Nano and then I get a Windows message saying "iTunes has encountered an unexpected error and has to close". Then everytime after that, whether the iPod is plugged in or not, I get the same message.
Has anyone else had this problem and been able to resolve it?

Sorry about the continued questions (this one is a bit odd).
Then after that, as soon as I click the iTunes icon, I get that message, regardless of whether the iPod's plugged in or not.
In some ways, the oddest thing is that you can get iTunes launching again after the issue starts happening.
Does the error when trying to launch go away after you restart the PC? Or do you have to do something different?
If it's clearing up after a restart, could you check something for me?
Provoke the nano-plugging-in error. Don't try to open iTunes again just at the moment.
Now bring up your Task Manager. Go into the processes tab. Click the "Image name" header to sort the processes alphabetically. Even though you've had that error message, is there still an iTunes.exe process listed in that tab?
If so, right-click on the process and select "end process". Does Windows let you end the process? If it does, can you launch iTunes again without the error?
(Trying to work out here if you're getting an an unusual variation of problems associated with security software interference with syncing, or possibly an idiosyncratic sort of iTunes preference files issue. Both can sometimes be associated with "unknown module" crashes, although I tend to expect something more like an iTunes.dll to be cited as the faulting module if that's afoot.)

Itunes causes a "itunes has encountered a serious error and needs to close"

Ok everytime i try to open up itunes it immediatly opens up a window that says itunes has encountered a serious error and needs to close....i send the error report microsoft directs me to check out that apple page to uninstall qt and then repair...i have tried everything that i read in these forums, even the one where it says to go into dos mode(F8 to get to safe mode) and delete the files that have a random 4 or 6 letter file ending in .exe
i am at my whits end here please help i need my itunes
by the way it worked fine when i first installed it for about 2 days then i get nothing...

oh yeah and when i go to uninstall it from add\remove programs when the wizard comes up and is running i get that same error and needs to close message, but i doenst effect the uninstall wizard(i dont think)........PLEASE HELP

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

HELP! Adobe Muse encountered an unexpected error and will have to be terminated. BD/getColorBoundsRe

I keep getthing message when my file loads in the program "This document contains 3 links to assets being unsampled. You should resize smaller or right-mouse click on the assets in the Assets panel to see additional options."
and then I click okay.
I get to the plan mode and then I try to go to the design mode (so i can fix the assets) and at about 90% loading it gives me this message "Adobe Muse encountered an unexpected error and will have to be terminated.
BD/getColorBoundsRect-ArgumentError: Error #2015: Invalid BitmapData." and i have to terminate the program...
How can i fix my assets so i can open my program? I use muse beta prerelease.

Well, after 20 hours of work and rebuilding most of my Muse website I finally was able to upload by site again.
Here was my problems per above and the last 20 hours. When publishing the site it does the following: Optimize assets, exportin desktip page 1 thru 19, Fining export HTML files then uploading images which I have 2208 on this site plus other stuff uploaded.
I can not answer why it now works as "normally"it would het error #2015 uring optimizing assets wich is an invalid bitmap data error and failed at only 9% publish process then got a 1125 index 0 is out of range0 at publish 20% complete.
I did rewrite most of the pages and made minor changes to all of them thinking that would force all pages to be uploaded as I also took option to upload all pages instead of just those that changes. All 2008 images were reloaded onto the pages by another hint I read on how to delete all thumbnails and thus the files is to select all and press delete and it will leave one as required. Then the one left could be deleted by itself. Thanks for whoever asked the question and who answered it. This saved me a lot of time.
Thanks to all that have taken the time to help me out. Muse is a great program but sometimes you don't have any idea if it is working at something so I found myself looking at the computer busy light to see if Muse was taking a lot of cycles. It would help to have a wider use of the cursor busy indicator as sometimes the system seemed like it was hung up but it was not.
Thanks guys!

Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.

Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adil

This messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil

Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

Hi there,
I am getting the following error in SharePoint 2007 site.
Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
Show Error Details
Hide Error Details
[WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
Any help would be highly appreciated.
Thanks,
Puli
Puli Bala

It is not only because of unsafe controls. Please refer the articles below.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
Puli Bala

SSMS: Open File Open File *Click Look In* then Visual Studio Encountered An Unexpected Error

Hi,
SQL Server 2008 R2 on a Windows Server 2008 R2 x64 box.
Strange one here. A user can OPEN SSMS and VS fine however when they try to Open a file by going Open > File > Open File in SSMS Windows Explorer opens then when you click 'Look-in' an error pops up saying "Visual Studio has encountered an unexpected
error". When I move that User to a different AD group it works.
GPO restricts only the D drive from view and it looks like that looks like the most relevant GPO to be set. Any ideas?
Bjorn

Hi Bjorn,
Based on my understanding, you could open SQL Server Management Studio and Visual Studio application. The issue was that error message "Visual Studio has encountered an unexpected error" was thrown out when you tried to open a file in SSMS.
According to “When I move that User to a different AD group it works”, the issue can occur because the computer is having trouble contacting the domain server to authenticate you as a user. In this scenario, there are two methods we can use:
Add the TCP\UDP port 88 to firewall rules.
Set the "Primary DNS" address to the IP address of your domain authentication server.
For more information, please refer to this article:
https://ava.co.uk/support/faq/general/visual-studio-encountered-an-unexpected-error.aspx.
Besides, based on this article(http://msdn.microsoft.com/en-us/library/ba78632y.aspx), the issue could be caused by unexpected data format and unexpected data source. Therefore, we should
close and then restart Visual Studio.
If you have any other questions, please feel free to ask.
Best regards,
Qiuyun Yu

The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
Raj

Hi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem"

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."

Hi hongkongpom,
Just wanted to say that after posting the problem, I had a chat with an iTunes' Tech Support, her name is Rebekah. My problem was resolved after that. Will list the chat history below in hopes that it may help you as well.
Good luck!
Samia
Chat Transcript
Friday, October 4, 2013 05:55 AM
Duration: 81 minutes 28 seconds
Rebekah:
Welcome to AppleCare chat support. Please give me a moment to look over your information.
Rebekah:
Hi, Samia! My name is Rebekah. If we get disconnected, please chat us back. http://www.apple.com/support/ipod/contactEnter the case number from the initial email we sent you. This gives the next advisor you chat with immediate access to your case history.
Rebekah:
Could you please confirm your serial number? I want to be sure we provide the best service possible for you, Samia!
SAMIA:
Sure, it's 8L8395UY2C5
SAMIA:
My problem is with iTunes.
Rebekah:
Thanks for that confirmation. Just a heads up, this is iOS Tech Support. We do support iPod touches, iPads, and iPhones, but not the iPod classic. But no worries! I can get you in touch with a phone Advisor who can get you in touch with the department that specializes in iPod classics and would be able to better assist you. Would that be OK?
SAMIA:
I wasn't able to install the new version of iTunes (version 11.1.1). The installation keeps failing. The they suggested the I install it manually and that failed too. I will attach the message I received.
SAMIA:
I don't have a problem with iPod.
SAMIA:
Just iTunes
Rebekah:
No problem! We can certainly troubleshoot iTunes as much as possible. It may come to the point that you may have to transferred, but we can do as much as possible during this chat!
Rebekah:
Thanks for the screenshot. It is a bit small so I am unable to fully see the message that you are receiving. What is the error message you are receiving?
SAMIA:
This is the message I received in case you weren't able to open the attachment: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
Rebekah:
Thanks for that info!
SAMIA:
Pleasure!
Rebekah:
What version of Windows (XP, Vista, 7) do you have?
SAMIA:
Windows 7
SAMIA:
Windows 7 Home Premium
Rebekah:
Thanks for that confirmation. I do apologize for the delay, Samia. I am researching this error code now. You mentioned trying to install iTunes manually. To be sure I am on the same page, what steps did you take to do that?
SAMIA:
Well when the indsatalltion failed I was given instructions to select Download Only from Tools and then install manually. When I did it, I window popped up with the following items: - AppleApplicationSupport
SAMIA:
- AppleMobileDeviceSupport64
SAMIA:
- Bonjour64
SAMIA:
iTunes64
SAMIA:
SetupAdmin
SAMIA:
I selected Repair in all of them instead of Remove and all worked but iTunes64
SAMIA:
That's when I received the message that I sent you earlier.
SAMIA:
By the way, this is the fir st time something like this occured. I never had problems with installation before.
Rebekah:
I completely understand what you're saying. Since that Repair did not resolve the issue, our best option is to uninstall iTunes and its components and redownload it. To do this, we will follow the steps in this article: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Rebekah:
First, we will want to quit iTunes and/or Apple Software Update if those are open at this time.
SAMIA:
Rebekah, the instructions you gave says, "For Windows XP, follow these steps to remove and reinstall iTunes and other software components for Windows XP."
SAMIA:
I closed all applications
SAMIA:
Also, my iTunes doesn't open anymore after the new failed installation.
Rebekah:
The section that says "For Windows XP…" is in case we opened up the wrong article, as we have the one for Windows Vista, 7, or 8. There is a link to click ("these steps") in those directions that would take us to the article for uninstalling on a Windows XP.
Rebekah:
So no worries! We have the right article!
Rebekah:
On the computer, we will want to click on Start > Control Panel. In Control Panel, we will click the "Uninstall a program" link.
SAMIA:
I thought so after doing a little exploration.
SAMIA:
done
Rebekah:
Alright, we'll want to select iTunes from the list of currently installed programs. Then we will click Uninstall. When asked if you would like to remove iTunes, let's click Yes.
Rebekah:
After the uninstallation is complete, we don't want to restart your computer if you're prompted.
SAMIA:
Done
Rebekah:
Then if you see other iTunes entries on the list, we'll want to remove them the same way.
Rebekah:
Then we will remove all instances of Apple Software Update the same way you removed iTunes.
SAMIA:
Okay, but do I have to remoce iCloud as well?
SAMIA:
Rebekah, I received the same error message again when uninstalling
Rebekah:
We actually do not need to remove iCloud. After the Apple Software Update, we will want to remove all instances of Apple Mobile Device Support
Rebekah:
How strange! Are you able to click past that and allow the process to continue or has it stopped it completely?
SAMIA:
I am unable to uninstall iTunes either
SAMIA:
Stopped completely
SAMIA:
I treied clicking Repair
Rebekah:
Alright, after trying the Repair option, let's see if it will allow us to continue uninstalling or not.
SAMIA:
I tried that but unfortunately, it isn't working. I still get that same message with error code 2324.
Rebekah:
This error code is not something that I am finding in my sources, Samia. So there is a chance that it is being caused with the Windows computer itself. However, I did find a link that may be able to help with uninstalling iTunes from Windows' support site: http://support.microsoft.com/mats/Program_Install_and_Uninstall
SAMIA:
Rebekah, you're a genius! It worked! iTunes is no longer there. What next?
Rebekah:
Awesome! I'm glad that worked!
Rebekah:
To be sure I am on the same page, what was the last component we uninstalled?
SAMIA:
iTunes
SAMIA:
Shall I remove the Apple Application Support, Apple Mobile Device Support, and Apple Software Update
Rebekah:
That is correct! However, we do want to uninstall it in the order I mentioned above. So Apple Software Update first, Apple Mobile Device Support next, and then Apple Mobile Device Support.
SAMIA:
Got it, but is the second one to uninstall Apple Mobile Device Support OR Apple pplication Support?
Rebekah:
The second one is Apple Mobile Device Support.
Rebekah:
The Application Support will be the last component we uninstall.
SAMIA:
Thanks! I'm on it.
SAMIA:
Done! ll 3 are gone, well 4 with iTunes. Now what?
Rebekah:
Awesome! Also, I just noticed that I accidentally typed Apple Mobile Device Support twice, I do apologize for any confusion! Now we will remove all instances of Bonjour and then remove all instances of Apple Application Support.
SAMIA:
There was only 1 instance with Bonjour. I don't know what the instances are for Apple Application Support
Rebekah:
Yes, Bonjour is often only listed once. Is the Apple Application Support listed at all?
SAMIA:
No
SAMIA:
Since I removed it
Rebekah:
Oh, perfect! If it was removed, we should be set!
Rebekah:
We have removed iTunes and its components now! From here, our next step is to restart the computer. Then once you reboot, you can redownload iTunes from apple.com/itunes
Rebekah:
That should allow you to download iTunes!
SAMIA:
Shall I downloaad the latest vesion?
Rebekah:
You will want to first restart the computer as shown in the article. That will ensure that this process goes smoothly and that everything was removed correctly! Then you can try downloading iTunes again.
SAMIA:
Okay, thanks Rebekah!
Rebekah:
You're very welcome! I'm glad I could help! And of course if you have any issue after the reboot and download, you can always chat us back, as chat is open 24 hours! You will just need to give your case number and the next Advisor would have all my notes!
SAMIA:
Thanks again for all your help, for I couldn't have managed with out it. Have a nice day!
Rebekah:
You're very welcome! I know how important iTunes is and I'm glad we could get you on a path to resolution!
Rebekah:
I hope you have a lovely day!
Rebekah:
It's been a pleasure speaking with you! Thanks for chatting with us Samia. If you don't have any more questions, select End Chat from the upper left corner of the chat window.
SAMIA:
Will do, thanks.

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? Thanks

As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

Adprep encountered a Win32 error

Similar Messages

Maybe you are looking for