ADR not applying to one site

Dear All,
Good Morning,
I am having an issue at work. The problem is with software updates deployement. We have a CAS arcitechture with 2 Primary site and 16 distribution points. When i create an ADR, The Packages arrives at the DPS but only installs on one site but the other site
stays in unkown state. I reviewed the rule engine log but no errors are found except the something fishy which keeps repeating :
"RuleEngine: 12652752 minutes is greater than MAX_TIME of 15 minutes, will sleep for MAX_TIME"
Do you guys have any idea what might be the issue cause am out of ideas here :(
Hoping to have a reply.
Kind Regards,
Mathieu Mariole

Hello Torsten,
Thanks for taking the time to look into the matter,
Software Distribution is working. Ive just installed an Application through this particular Managment point it installed fine. You can view the screenshot below.
Any ideas how i can double check wether the Software Update Point is working as intended ? i have reviewed the logs described in the "Software Update Point Log Files" on the page "http://technet.microsoft.com/en-us/library/bb892800(TechNet.10).aspx"
and i am having an error in the WSUSCtrl.log file, i have bolded the errornous part :
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.7600.226)~ $$<SMS_WSUS_CONTROL_MANAGER><12-26-2013 13:03:53.207-240><thread=2416 (0x970)>
Successfully connected to local WSUS server $$<SMS_WSUS_CONTROL_MANAGER><12-26-2013 13:03:53.517-240><thread=2416 (0x970)>
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 $$<SMS_WSUS_CONTROL_MANAGER><12-26-2013 13:03:54.350-240><thread=2416 (0x970)>
Successfully connected to local WSUS server $$<SMS_WSUS_CONTROL_MANAGER><12-26-2013 13:03:54.786-240><thread=2416 (0x970)>
Errors were reported in these WSUS Server components WSUSService, on WSUS Server PDWVM-SCCM-01.mpcb.local~ $$<SMS_WSUS_CONTROL_MANAGER><12-26-2013 13:03:55.347-240><thread=2416 (0x970)>
Failures reported during periodic health check by the WSUS Server PDWVM-SCCM-01.mpcb.local. Will retry check in 57 minutes~ $$<SMS_WSUS_CONTROL_MANAGER><12-26-2013 13:03:55.366-240><thread=2416 (0x970)>
~Waiting for changes for 57 minutes $$<SMS_WSUS_CONTROL_MANAGER><12-26-2013 13:03:55.368-240><thread=2416 (0x970)>
Do you think this might be the cause of the problem ?
Kind Regards,
Mathieu Mariole

Similar Messages

Group Policy Pref - Mapped Drives Not Applying to One User

Hi All,
I’m new to this list, so please excuse any etiquette slip ups. 
I have three users at a site. All their machines are running Windows XP Service Pack 3 and have client side extensions installed. I created a group policy to map their default drives using GP User Preferences.
Each of the drives is set to "update".
As an example of the policy created XML is as follows:
<Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="H:" status="H:"
image="2" changed="2009-11-25 05:13:58"
uid="{8A44D2F4-AAE5-4F43-AEEC-D36F08EA619C}" desc="Maps the users H drive to
ServerName\users$\%username%" bypassErrors="1"><Properties action="U"
thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
path="\\ServerName\users$\%username%" label="Home (ServerName)"
persistent="1" useLetter="1" letter="H"/></Drive>
and
<Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="J:" status="J:"
image="0" changed="2009-11-30 03:52:58"
uid="{535CD462-A45D-4363-ADA1-2316D5ECC703}" desc="Maps J drive for users to
\\ServerName\apps" bypassErrors="1"><Properties action="C"
thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
path="\\ServerName\Apps" label="Apps (ServerName)" persistent="1"
useLetter="1" letter="J"/></Drive>
The group policy is applied to an OU for that site.
All three users are in the same OU.
All three users are also in the same “xxsitecode Users” group.
2 of the users log into their pc and get the mapped drives with no issue, but one user doesn’t.
There are no other login scripts and the user has no manually mapped drives.
He does have a H drive mapped using the profile field in his AD object as a temp measure. But every 90 mins any other manually mapped drives are removed by the policy.
We don’t use roaming profiles
To trouble shoot I have tried
-    Reinstalling client side extensions
-    Re-joining the pc to the domain
-    Running gpupdate from the command prompt to see if any event logs are generated (none are)
-    Manually mapping the drives to make sure there is network access etc – I can manually map them/he can access them.
-    Creating the user a new account, when he logs in using that account he gets his mapped drives on all PC’s
-    Getting the user to log into a different pc, when he does this he doesn’t get his drives – so it’s not his machine or profile
-    Manually checking the security on the user object in AD against one of the users who gets their drives mapped
I'm sure the GP is fine because it works for two other users and the testing isolates his user account as the issue.
The Policy I’m having issues with is xxxx Mapped Drives/ Printers
I have posted this issue on the tech net GP discussion groups page, but haven’t had any replies.
Any suggestions would be appreciated.
Simone

What's interesting is that I applied a new GP to users - it has one policy setting and one preferences setting. He only gets the policy setting.. aka he gets the wallpaper but not the homepage.
Also, Jorke asked me to post the gpresult /z .
Microsoft (R) Windows (R) XP Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 10/02/2010 at 2:19:34 PM
RSOP results for DOMAIN\USER on MACHINENAME : Logging Mode
OS Type:                     Microsoft Windows XP Professional
OS Configuration:            Member Workstation
OS Version:                  5.1.2600
Domain Name:                 DOMAIN
Domain Type:                 Windows 2000
Site Name:                   SITECODE
Roaming Profile:
Local Profile:               C:\Documents and Settings\USER.DOMAIN
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=MACHINENAME,OU=Laptops,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
    Last time Group Policy was applied: 10/02/2010 at 1:06:38 PM
    Group Policy was applied from:      XXXXXADC.DOMAIN.com.au
    Group Policy slow link threshold:   500 kbps
    Applied Group Policy Objects
        Allow Remote Assistance
        au-mdwsus
        Default Domain Policy
        Legal Notice
        Proxy Settings
        Logon as service, operating system
        AU-WSUS
        Desktop Background & Home Page
        Reg Permissions for default desktop
        Local Admin & Local Power Users
    The following GPOs were not applied because they were filtered out
        SITECODE Mapped Drives/ Printers
            Filtering: Not Applied (Empty)
        Local Group Policy
            Filtering: Not Applied (Empty)
        AVD Rollout
            Filtering: Disabled (GPO)
    The computer is a part of the following security groups:
        BUILTIN\Administrators
        Everyone
        Debugger Users
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        MACHINENAME$
        Domain Computers
        CERTSVC_DCOM_ACCESS
    Resultant Set Of Policies for Computer:
        Software Installations
            N/A
        Startup Scripts
            GPO: Desktop Background & Home Page
                Name:         image.bat
                Parameters:
                LastExecuted: 7:55:34 PM
                Name:         swiftdesktop.vbs
                Parameters:
                LastExecuted: 7:55:35 PM
        Shutdown Scripts
            N/A
        Account Policies
        Audit Policy
        User Rights
        Security Options
        Event Log Settings
        Restricted Groups
        System Services
        Registry Settings
        File System Settings
        Public Key Policies
            N/A
        Administrative Templates
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts\List
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\CurrentVersion\Winlogon
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: Desktop Background & Home Page
                Setting: Software\Policies\Microsoft\Internet Explorer\Security
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
USER SETTINGS
    CN=Matthew Luhrs,OU=Users,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
    Last time Group Policy was applied: 10/02/2010 at 1:54:53 PM
    Group Policy was applied from:      XXXXXADC.DOMAIN.com.au
    Group Policy slow link threshold:   500 kbps
    Applied Group Policy Objects
        Allow Remote Assistance
       **** SITECODE Mapped Drives/ Printers - has Gp Pref's that should apply
        Default Domain Policy
        Proxy Settings
        **** Desktop Background & Home Page - has Gp Pref's that should apply
        Local Admin & Local Power Users
    The following GPOs were not applied because they were filtered out
        AU-WSUS
            Filtering: Not Applied (Empty)
        Legal Notice
            Filtering: Disabled (GPO)
        Reg Permissions for default desktop
            Filtering: Not Applied (Empty)
        Logon as service, operating system
            Filtering: Not Applied (Empty)
        Local Group Policy
            Filtering: Not Applied (Empty)
        au-mdwsus
            Filtering: Not Applied (Empty)
        AVD Rollout
            Filtering: Disabled (GPO)
    The user is a part of the following security groups:
        Domain Users
        Everyone
        Offer Remote Assistance Helpers
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        NT AUTHORITY\Authenticated Users
        LOCAL
        Computer Account Operators
        Internet Users
        SITECODE Users
        DOMAIN-Public Folders Administrators
        All Email Users
        DOMAINSWIFTEMAIL
        Domain Admins
        Offer Remote Assistance Helpers
        WSUS Administrators
        DHCP Administrators
        CERTSVC_DCOM_ACCESS
    Resultant Set Of Policies for User:
        Software Installations
            N/A
        Public Key Policies
            N/A
        Administrative Templates
            N/A
        Folder Redirection
            N/A
        Internet Explorer Browser User Interface
            GPO: Proxy Settings
                Large Animated Bitmap Name:      N/A
                Large Custom Logo Bitmap Name:   N/A
                Title BarText:                   N/A
                UserAgent Text:                  N/A
                Delete existing toolbar buttons: No
        Internet Explorer Connection
            HTTP Proxy Server:   Proxy:port
            Secure Proxy Server: Proxy:port
            FTP Proxy Server:    Proxy:port
            Gopher Proxy Server: Proxy:port
            Socks Proxy Server: Proxy:port
            Auto Config Enable: Yes
            Enable Proxy:        Yes
            Use same Proxy:      Yes
        Internet Explorer URLs
            GPO: Proxy Settings
                Home page URL:           N/A
                Search page URL:         N/A
                Online support page URL: N/A
        Internet Explorer Security
            Always Viewable Sites:     N/A
            Password Override Enabled: False
            GPO: Proxy Settings
                Import the current Content Ratings Settings:      No
                Import the current Security Zones Settings:       No
                Import current Authenticode Security Information: No
                Enable trusted publisher lockdown:                No
        Internet Explorer Programs
            GPO: Proxy Settings
                Import the current Program Settings: No

I cannot log onto sites that require my log in and password. I get no error message, fire fox just goes back to the same empty log in screen. this problem is not limited to one site. I reloaded firefox with same results.

When i type in my log in and password and enter, the site either returns to the blank screens or does nothing. This is not limited to one or two sites. all of my financial institutions, electric company, insurance companies, even trying to register here so that i could ask this questions. In this situation, when i hit the register button, nothing happend, its as iff the button is inactive. i had to go to IE to register and post this question. I just tried to enter my new log in and pw on the screen in fire fox and nothing happens. Some sites behave differently when i hit the submit or log in button. the information seems to be transmitted but the screen comes right back to the original log in screen with blank fields. there are no error instructions that something does not match or is missing. then i go to IE and it works.
This started a few weeks ago. I cant identify anything that was added around that time but i tried a system restore and that did nothing. i deleted fire fox and downloaded the latest version 3.6.13 and it is still happening

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

Why is the background color not applied in one case?

Hi,
I'm using RH 7 and WebHelp.
I apply a TableHeading style to the first row of my tables. The TableHeading style is supposed to fill the cells of the first row with a background color of blue, and the text is in white. It works fine except for one table. I think TableHeading style was not applied in the Word document when I imported this topic. I tried to apply the TableHeading style to the first row, and it says it is applied in the HTML. But, the background blue does not fill the cells.
Here is what I am trying to achieve:
Here is my problem table:
I can see in the HTML that the background color is not present in the code. Here is the code for the example that is correct:
<p class=TableHeading>Chapter</td>
<td style="border-left: none; border-right: solid #000000 1.0px; border-top: solid #000000 1.0px; border-bottom: solid #000000 1.0px;
          width: 279.4pt; padding: 0in 5.4pt 0in 5.4pt; background-color: #003399;"
bgcolor=#003399 width=279.4pt>
<p class=TableHeading>Description</td></tr>
<tr><td style="x-cell-content-align: top; border-left: solid #000000 1.0px; border-right: solid #000000 1.0px; border-top: none;
                   border-bottom: solid #000000 1.0px; width: 182.85pt; padding: 0in 5.4pt 0in 5.4pt;
                   padding-left: 0px; padding-top: 0px; padding-right: 0px;
                   padding-bottom: 0px;" valign=top width=182.9pt>
Here is the code for my problem table:
<p class=TableHeading>Activity</td>
<td style="border-left: none; border-right: solid #000000 1.0px; border-top: solid #000000 1.0px; border-bottom: solid #000000 1.0px;
          width: 168.0pt; padding: 0in 5.4pt 0in 5.4pt;" width=168pt>
<p class=TableHeading>Keyboard Shortcut</td></tr>
<tr style="x-cell-content-align: center;" valign=middle>
<td style="width: 374px; x-cell-content-align: top; border-left: solid #000000 1.0px; border-right: solid #000000 1.0px;
          border-top: none; border-bottom: solid #000000 1.0px; padding: 0in 5.4pt 0in 5.4pt;
          padding-left: 0px; padding-top: 0px; padding-right: 0px;
          padding-bottom: 0px;" valign=top width=374px>
Here is the code from the CSS:
p.TableHeading {
background-color: #003399;
punctuation-wrap: simple;
text-autospace: none;
font-size: 10.0pt;
font-weight: bold;
color: #ffffff;
font-family: Verdana, sans-serif;
margin-left: 3pt;
margin-right: 3.0pt;
line-height: 120%;
margin-top: 0pt;
margin-bottom: 0pt;
LI.p-TableHeading {
punctuation-wrap: simple;
text-autospace: none;
font-size: 10.0pt;
font-weight: bold;
color: #ffffff;
font-family: Verdana, sans-serif;
line-height: 120%;
Any suggestions?
Thanks,
Julie
I don't understand why the TableHeading style is not applying the background color for the one table. I'm guessing I could just add it to the code using the HTML editor. However, I wasn't sure if that was the best way to fix this problem or if I would create another problem.

Hi Willam,
Thanks for your answer, and I will go ahead and add the background color to the problem table.
However, I am still puzzled as to why the background color is applied to the cells in the other tables and not the problem table. I'm not sure what I did to cause the problem - how I applied the TableHeading to the table cell in one case and not the other. Any ideas how I can avoid this problem?
I will not use the Word documents going forward and will only make changes with the RH editor.
Thanks again,
Julie

Alerts do not work on one site collection - Alerts have EventTypeBitmask of -1 - do you think this is the problem

I have a farm with approx 200 site collections in it.
We did recently move sites from one farm to another. All other site collection alerts work, Yet I have one site collection that just does not send alerts.
Things I have done to attempt to get them to work:
1. Turn Alerts off and back on
stsadm -o setproperty -url "sitecollectionurl" -pn Alerts-enabled -pv False
stsadm -o setproperty -url "sitecollectionurl" -pn Alerts-enabled -pv True
2. Update the alerts template
stsadm -o updatealerttemplates -url "sitecollectionurl" -f "c:\program files\path to \AlertTemplates.xml
3. Update all the siteurl properties of all alerts to the correct url
4. update all the mobilurl propties of all alerts to the correct url
5. updated all the Alert.Titles
None of these have worked for me to get the alerts to start working
The only thing I see different is this EventTypeBitMask property.
Does anyone have any other suggestions to get alerts working on this site collection?
Thank you for any help
[email protected]

Hi,
Whether all of the user can’t receive alert email in this site collection.
Check whether the "Immediate Alerts" time job is enabled for your web application.
Try to do restart SharePoint Timer services and IISReset.
Here are two articles about troubleshooting SharePoint alerts not working, you can use as a reference:
http://www.sharepointdiary.com/2012/02/sharepoint-alerts-not-working-troubleshooting-checklist.html#ixzz2aSvOz3hB
http://blogs.technet.com/b/steve_chen/archive/2009/11/20/alerts-in-sharepoint-troubleshooting-moss-wss.aspx
Besides, here is a similar post, you can take a look at:
https://social.technet.microsoft.com/Forums/en-US/895a5612-9237-4d66-8cb3-37e7eefe8dbb/alerts-not-working-for-a-single-site-collection?forum=sharepointadminlegacy
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

DLU policy not applying - Console One won't OK

I've created a DLU policy that has administrator group rights. When I try
to associate it to a user I click OK and the the screen stays (doesn't
close). The button isn't greyed out and an hour glass appears but it does
nothing. I've tried the reverse - associating the policy from the user -
with the same results. Tried deleting and recreating both the user and
policy in different containers.
Dsrepair shows everything is clean and the tree is synced.
Single server tree, netware 5.2 sp7, zen 3.2, console one 3.5
I have other trees exactly the same and do not have this issue....

Don't really want to apply anymore patches. We did on one install and it
messed up all our configurations. This is at a school and with the
students now back I can't afford any down time.
> Hi
> Could you try with Zen SP3 on the current 1.3.6c Consoleone if you see
> the same problem ?
>
> --
> Regards, Kai Reichert
> Novell Support Forum Sysop
>
> People who claim that computers will make life easier for us have
> obviously never used one.

Search is not working for only one site collection

Hi All,
I have one issue where users are searching something on a site collection nothing is coming out. Search is working on web application level but not in only one site collection.
I checked the crawl log and found below error for this site collection

Hi Aditya,
From the error message, there might be several reasons:
Configure search time-out settings (Search Server 2010):
http://technet.microsoft.com/en-us/library/ee808892.aspx
Please check the user accounts created under the home group that could push the limit of the ACL, and this error message may be occur:
http://www.sweendog.net/blogengine/post/2012/02/03/The-Filter-Daemon-has-Timed-Out.aspx & http://sharepoint.stackexchange.com/questions/26755/sharepoint-2010-search-server-not-crawling-content-due-to-filter-daemon-timeout
Make sure the search service account has access to SearchIndex share:
http://www.sharepointsecurity.com/sharepoint/sharepoint-development/fixing-the-filter-daemon-did-not-respond-within-the-timeout-limit-error/
If the links above doesn’t help, please collect more error message in ULS log for troubleshooting.
Regards,
Rebecca Tu
TechNet Community Support

Master pages not applying to site and subsites

I am having an issue with a master page not applying to a site and subsites. The site is created using the community template and has the following hierarchy:
TopLevel: SharePoint Central - server/SPCtrlv2/sitepages/welcome.aspx (webpart page)
subsite1: Community - server/SPCtrlv2/community/sitepages/categories.aspx (community template)
subsite2: Learn - server/SPCtrlv2/learn/pages/default.aspx (publisher template)
subsite3: Showcase - server/SPCtrlv2/showcase/default.aspx (blog template)
The community site was created and then the Welcome page was changed to point to the Welcome.aspx location. (not sure if that matters) When making the application from the top level via Site Settings > Look and Feel > Master Page > dropdown from
Site Master Page (SPC_Global), the master is only applying to the Learn sub site. In SP Designer, the master page/ css files are not showing although they are on the site. (Using designer 2010)
I was able to apply the master with no problem when the top level used the publisher site template. Unfortuately, the community template is not available at the sub site level so we created a new site with the community template at the top.
Any guidance you can provide is much appreciated

Hi,
According to your description, you want to apply master page to all sub sites.
Did you use SharePoint 2010 or SharePoint 2013?
If you use SharePoint 2013, you may need to use SharePoint Designer 2013 to find the master page file.
For applying master page to all subsites, I suggest you do as the followings:
1. Make sure you have enabled the “Reset all subsites to inherit this site master page setting” in the Top Level “site
setting”->”site master page setting”.
2. Check whether you have enabled “Inherit site master page from parent of this site” in the “site setting”->” site master page setting” of each sub site.
There are some detailed articles for your reference:
http://davecoleman146.com/2011/06/28/apply-master-page-for-all-subsites-in-sharepoint-2010/
http://msdn.microsoft.com/en-us/library/office/jj862339(v=office.15).aspx
Best regards
Patrick Liang
TechNet Community Support

Trouble accessing one site.

When the router (WRT54GS) is in place I am unable to get to www.pogo.com. When I remove the router it comes up fine, I have tried setting up one machine on the DMZ setting to bypass anything that might be causing this and still it will not reach the one site. I did change the original setup so I figured maybe I goofed somewhere so I reset the router back to defaults and still nothing. I know this is probably a noob thing and I hate asking but I couldn't think of anything else to try. I thought at first it was routing issues with Comcast until I removed the router from the situation. Any help or suggestions is greatly appreciated. Thanks
Allen

Click start >> control panel >> internet options >> under security >> custom level >> security settings ..... choose reset to "medium" ....click apply & ok .....
Under "privacy" click "advanced" ..... check "Override cookies" ....click ok ....
Check if it is working ......

ZCM 11 Group Policies not applying to satellite servers

Hi there
We are running 2 Windows 2012 Primary Servers and a SQL 2012 Database server at our main site, all remote sites have SLES11 SP2/OES11 SP1 as satellite servers. We upgraded all servers last weekend to 11.3.1 and now have an issue with Group Policies applying to the satellites. The satellites are all set up the same with Authentication, Collection, Content and Imaging roles.
Since we upgraded Group Policies are (99% of the time) not applying on satellite sites. I have tried manually replicating content (I assume policies will come from content replication?) to the satellites - I've done this with a zac cdp replicate and zac cvc and everything seems to replicate over however I tried highlighting a satellite server and clicking on Action, Specify Content - select the Policy that is not applying and move it into the selected Content to update column and when I click finish I get the error "The Wizard cannot continue for the following reason(s): Unable to complete your request for the following reason: Error updating content"
On a managed device at the satellite site if you look at the properties of the Zenworks agent and click on Policies it has applied 4 device assigned policies successfully - Remote Management, Power Management, Application Launcher Config and Application Control Policy, also has successfully applied 3 out of the 4 User Assigned Policies - Mandatory Profile, Dynamic Local User, Application Control - but not the Windows Group Policy.
Our PCs are on Windows 8.1 and all policies were applying fine before the weekend upgrade......
Has anyone else had any experience of Group Policies not applying that could point me where to look? I have logged an SR with Novell through our reseller but as yet I am getting no response back at all, not even asking me for more information.
Many thanks
Sharon

Sounds like you have a content replication issue more than a GPO issue.
Especially if the GPO works for locations that point to the Primaries
for Content.
Do you have throttling configured anywhere in any fashion?
You may need to increase the Replication Timeout to make sure content is
getting over to the Sats. Often increasing from 60 to 240 helps, but
watch out for throttling preventing content replication.
It is possible things are backing up.
On 7/31/2014 8:26 AM, shazzypoos wrote:
>
> I should add that when you looked at the "Click for Details" to the
> right of the Effective "Failed" status the message is "Policy
> Enforcement Failed : The action (0) threw an exception. Message (1).
> Exception (2) (grouppolicy, "None of the source locations could be
> found"
>
> Hmmmm! Currently in closest server rules there is only the server for
> the site it's on set - we do not want it to come back to the Primary for
> policies. As I say, this was working before the weekend upgrade. Thanks!
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Dreamweaver ftp won't connect to host for one one site

HI,
have spent over 3 hours on this, and double checked
everything, even with ISP to make sure my host address is correct.
I can connect to the host address via other programs and ftp
I have the same settings in dreamweaver, but it won't
connect.
I can connect to other sites with this same dreamweaver, and
can create NEW connections too, but not to this one site that I can
connect to with everything else, but dreamweaver.
The is dreamweaver MX,
Can anyone help?

Adobe provides a test FTP server for these purposes. You can read about it here -
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-issues-dreamweaver-cs5.html#main_Ve rify_FTP_access
Try setting up a connection to that server and see if you can connect.

CSS not applying to a page if navigated to from one other page in the site

Hi,
Quite new to dreamweaver. Built a site a few months ago and when updating the content I decided to update the style as well using the CSS sheet.
Strange problem occurring....
When you navigate to the Contact Us page directly via URL or any but one page in the site, the SCC applies and webpage displays well.
However, if you navigate to the Contact Us page form the About Us page then all styling is lost.
Below is my NavBar coding. I have compared it on all pages and it's the same. Can't work out why CSS not applying in this one specific instance.
<nav id="mainnav">
      <ul>
        <li><a href="index.html">Home</a></li>
        <li><a href="TheCollection.html">Collection</a></li>
        <li><a href="News.html">News</a></li>
        <li><a href="About.html" class="thispage">About Us</a></li>
        <li><a href="Contact.html">Contact Us</a></li>
      </ul>
    </nav>
Any advice appreciated and let me know if I can provide anything else that might help you to help me.
Thanks!
S

How many style sheets do you have for your entire site?
You should have boilerplate.css, your fluidGridLayout.css (whatever you named it) and one other custom css file for your content styles. All 3 style sheets should appear on every page. For site management reasons, I usually put my CSS files into a styles folder.
Sitename (C:\sitename)
index.html
about.html
contact.html
etc...
     -styles
          boilerplate.css
          layout.css
          custom.css
With that structure above, your links to external style sheets should look something like this on every page.
<link href="styles/boilerplate.cssview-source:http://www.theseasonhats.com/keysheet.css" rel="stylesheet" type="text/css">
<link href="styles/layout.css" rel="stylesheet" type="text/css">
<link href="styles/custom.css" rel="stylesheet" type="text/css">
Nancy O.

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Safari Will Not Download pdfs: On One Site and from One Computer Only

On only one computer, at only one web site (my own creation), I suddenly cannot get pdfs to open in Safari 4.0. What might be happening?
1. I have created 5 web sites for my business. I use RapidWeaver from RealMacSoftware.
2. Each of the 5 sites I’ve created has downloadable pdfs.
3. Two of the sites are password protected, but this does not appear to be the source of the problem.
4. One of these two protected sites (Site A) will not open any pdfs on the site in a Safari browser window on my Intel iMac running 10.5.7. When I click on a pdf link in Safari, I get the gray spinning wheel on a white page (which does not stop after 10+ minutes). If I try to reload the page, a white page results. Trying any other pdf link on this site produces nothing but a white page.
5. If I option-click on the link, the pdf downloads fine, but I then have to open it. It does not open in Safari, but rather Reader.
6. This behavior does not occur on two other Macs in my office. One, a MacBook Pro running 10.5.7 and Safari 4.0, opens the pdfs in Safari just fine. Another, a G5 running Tiger with Safari 4.0, also works fine. (FWIW: No problems on Dell running XP Home, via either Explorer or Firefox.)
7. The behavior also does not occur on the other protected site I have created (Site B) or on any of the other unprotected sites. All computers, all browsers—no problems.
8. I have the latest Adobe Reader version (9.1.2).
9. I have repaired permissions and restarted—no luck.
10. I have republished Site A through RapidWeaver, but there is no change. My web host had a power failure a day or two ago, but all sites were up and running yesterday.
Any clues about what’s going on? I have intentionally not downloaded the apparently available Safari version 4.0.1 because of the several problems reported on the boards.
Message was edited by: Richard Setterberg

I tried logging in to the guest account and got a slightly different result: Two of the five websites I've created with RapidWeaver now do not display pdfs using the Adobe Reader plugin.
The common thread now is that the two that don't work are the password protected sites. When I boot back into my main account, the original problem returns: Only one site doesn't work; the other one does.
Still only on one computer.

Auto loading of username and password are taking place on one site and only one site and I do not want this to happen but can"t get it to stop.

As my question states I don't want auto loading on any site and it only happens on this one site. I have went thru tools and options and there are no sites listed for auto loading. There are no saved passwords. If I go to the site using Internet explorer the problem does not occur.

Ok, no problem i found this help articles:
https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
http://www.youtube.com/watch?v=OukBlXfOP8Y

ADR not applying to one site

Similar Messages

Maybe you are looking for