ADR refuses to run this month

Hi all,
I have a test environment and I created an ADR for software updates. I went and had a look after the expected run time and the rule had not run. "Last Evaluation Time" was blank. The rule is enabled. I checked the ruleengine.log and I see no errors.
I've been trying to figure it out today and changing the time in the evaluation schedule and seeing the new entries change in the log. For some reason, every time I change the evaluation schedule, the log tells me it will run next month. This seemed to happen
when I changed my ADR time from 10:00PM to 11:00PM well before the expected evaluation time because I realized my SUP would sync at 10. Prior to the change, the ruleengine.log said:
Refreshed ScheduleList instance for Rule (16777220) from schedule string (02ECBAC000231400) with next occurence (11/12/2013 10:00:00 PM) SMS_RULE_ENGINE 10/28/2013 4:09:43 AM 1736 (0x06C8)
After the change:
Refreshed ScheduleList instance for Rule (16777220) from schedule string (02ECBAC000231400) with next occurence (12/10/2013 11:00:00 PM) SMS_RULE_ENGINE 11/4/2013 3:00:18 AM 1736 (0x06C8)
Now, I'm wondering if the change in time (from Daylight savings time) might have something to do with it? That time change happened on the 2nd.
For example:
Today is the third Wednesday of the month. I change my ADR to run tomorrow (the third Thursday) at 11:00 PM and recur every month on the 3rd Thursday. The log displays the following entry:
Refreshed ScheduleList instance for Rule (16777220) from schedule string (02F5BAC000251600) with next occurrence (12/19/2013 11:00:00 PM) SMS_RULE_ENGINE 11/20/2013 11:19:21 AM 1736 (0x06C8)
It seems that the ADR refuses to run this month and I can't for the life of me figure out why. Any thoughts on this? I hope this post isn't too confusing. I'm still a relative noob when it comes to SCCM

Hi,
Here is a useful article for your reference.
Using System Center 2012 Configuration Manager - Part 9. Deploying Monthly Updates
http://www.windows-noob.com/forums/index.php?/topic/6799-using-system-center-2012-configuration-manager-part-9-deploying-monthly-updates/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Flash Player refuses to run, if outdated. Can I change this setting?

I work in a video production environment -- tonight we ran into a problem where a couple of live monitoring systems were not working because Flash refused to run; presumably, because it's out of date.   In this case, the systems are "Deep Frozen" (locked down, essentially).
While I think I understand the underlying reasoning for this, it's highly disruptive.    Is there a way we can change Flash Player so it doesn't refuse to run if it's outdated?
These systems are on OSX Yosemite. It's possible it's not just a Flash Player setting, but a browser setting -- still trying to track this down.
Tips, pointers would be appreciated!
Thank you.

Yeah, that makes sense. Faronics is really into buzzwords. It was hard to cut through the marketing-speak to figure out what they were actually doing.
The plug-in blocking technology on Mac is called xprotect. You can disable it, which might make sense in your use-case, but it's typically a really bad idea for the average end-user.
sudo mkdir /System/Library/Launchdaemons/Disabled
sudo mv /System/Library/LaunchDaemons/com.apple.xprotectupdater.plist /System/Library/LaunchDaemons/Disabled/com.apple.xprotectupdater.plist
sudo /usr/libexec/PlistBuddy -c "Delete:JavaWebComponentVersionMinimum" /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/XProtect.meta.plist
I'm guessing that these files are mutable on the system and not part of the persistent snapshot, or I imagine that the blocking would have went away after a reboot. I'm thinking that you can probably disable these and update the relevant snapshots to ensure that you're not picking up new xprotect blacklists in the field.
If you're just hitting the same set of consistent local IPs for your monitoring backend, it might make more sense to preconfigure them in Safari as always allowed vs. wholesale disabling xprotect.
Hopefully that's helpful.

I am apparently using a crazy amount of data this month. Could there be something running in the background on my device?

I am apparently using a crazy amount of data this month. Could there be something running in the background on my device?

As mama23dogs said check data usage, if you see any spikes you can drag the vertical lines in to that range and it will update the apps for that time frame.

My account runs out this month and i want to know what is on offer

my homebroad runs out this month and the shop would not tell me what was on offer

More of the same!
These contracts don't just run out; it's just the min. term that expires. You may either continue as you are, look in your Member's Centre, https://membercentre.orange.co.uk/MCPres/ . for BB plan, if any, that suits you more, migrate to another ISP or stop BB altogether.
EE shops know nowt about BB; they are just mobile salesmen.

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?

A: my MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

An error occurred while preparing the installation try running this application again mountain lion

I have Macbook Pro. Previous OS was Mountain Lion 10.8.5. It was running smoothly. When I have tried to clean install the NEW Maverick 10.9 it didnt work. I erase the drive then restart for boot. nad my usb boot disk was connected. When the window came for reinstall the OS. I click. click to "continue" but then it says....there has a problem with boot. But six months ago I installed it in the same way without any error or any hamper. after that i tried many times to boot and install but i failed. i tried to recover it by internet recovery. it takes few hours. after completation the recovery the reinstall window again came. i click to reinstall then it says "an error occurred while preparing the installation try running this application again mountain lion"

i tried several times but it doesn't work. now i am downloading again osx 10.8.5 dmg to try again.

Creating a simple batch job to run every month and perform a deletion

dear all;
This is just for learning purposes
I have created a simple table below
create table t1
vid varchar2(30),
quantity number(6,2),
primary key (vid)
insert into t1
    (vid, quantity)
values
    ('G1', 2);
insert into t1
    (vid, quantity)
values
    ('G2', 3);
insert into t1
    (vid, quantity)
values
    ('G3', 0);Now, I would like to create a simple batch job, that runs every month which is used to delete all vid that has a quantity of 0...How do i go about doing that. I have searched the web but can't seems to find any useful info so far..
Edited by: user13328581 on Sep 8, 2010 8:32 AM

you are missing a semi-colon in your package procedure call inside your begin ... end.
begin
dbms_scheduler.create_job
    job_name => 'jobdeletezeroquantity'
    , program_name => 'PLSQL_BLOCK'
    , job_action => 'BEGIN mfg.testpkg.deletezeroquantity END;'             <-- missing semi-colon on mfg.testpkg.deletezeroquantity
    , start_date => systimestamp
    , repeat_interval => 'freq=monthly; byday = 1'
    , end_date => null
    , enabled => True
    , comments => 'used to run a delete procedure every month'
end;should be:
begin
dbms_scheduler.create_job
    job_name => 'jobdeletezeroquantity'
    , program_name => 'PLSQL_BLOCK'
    , job_action => 'BEGIN mfg.testpkg.deletezeroquantity; END;'
    , start_date => systimestamp
    , repeat_interval => 'freq=monthly; byday = 1'
    , end_date => null
    , enabled => TRUE
    , comments => 'used to run a delete procedure every month'
end;

And my activation date of this month is oct.2. But...

I bought 400 minuits 3 months 2 month ago. And my activation date of this month is oct.2. But it doesn't work yet. It is oct.3. What can I do for it?

"This accessory is not supported" usually refers to an inability to charge the iPod, but the music should still play throguh the Bose dock. My iPod Touch works this way.
However, when the Bose refuses to make any sound, I unplug it from mains power for one minute. Then plug it back in and try again. This always sorts out the sound issue, but of course, it still will not charg the Touch.
What happens in your case?

Problem with bex query listing sales "this month" and "same month last year

Hi,
I've created a query in BW BEx, where I have a mandatory variable for 0calmonth, and I list 0material and sales (in volume, liter). And I have a restricted key figure giving me sales (volume in liter) restricted with 0calmonth = variable - 12, to give me the sale for the same month the user select, previous year.
This seems to be working, the sum is correct, but when adding up the number for the sales in the month previous year, the numbers does not fit the sum in the end.
I think the report only lists materials with sales the month selected in the variable, if a material has not been sold that month, but in the same month last year, it's not listed in the reports, but it's added in the sum in the end.
Example.
We have three records like this:
material - calmonth - volume
101 - 01.2010 - 5
101 - 01.2011 - 8
201 - 01.2010 - 7
The report will give the following (calmonth variable = 01.2011)
Material - volume this month - volume same month last year
101 - 8 - 5
Sum 8 - 12
Any way to solve this issue? We noticed because we run BO - Webi on top of the BEx query, and BO sum's the values per material, and in webi the report would give us the sum 8 and 5.
Any input is appreciated.
Regards,
Øystein

Hi,
thanks for your reply.
The error is that the report only seems to list materials that has been sold "this month", and if the same material was sold the same month last year, it will also list the volume for this.
But if the material is only sold in the same month last year, it's not listed in the report, but it's calculated into the sum at the end.
The report is listing material, which is why the error presents itself, as you said
Getting 8 minus 12 is correct unless you drill down by material. In that case, it should be 8 minus 5 and 0 minus 7.
The row with 0 - 7 is not shown, and my guess is that the report will only list materials that has sales this month (which has been selected in the variable)
Regards,
Øystein
Edited by: Oystein Gundersen on Mar 21, 2011 4:36 PM

Anyone provide accurate info on why after 1 yr, after guarantee period expiry the DVD player on our I mac running Intel core duo processor with OS 10.6.8 refuses to run DVDs? CDs run

Can anyone provide accurate info on why after 1 yr, ( just after guarantee period expiry) the DVD player on our I mac running Intel core duo processor with OS 10.6.8 refuses to run DVDs?
CDs run without problem and until recently the DVD we have (all original no pirated copies) ran; we have used a CD cleaner disc to no avail.

Welcome to the Apple boards:
I suggest an erase and install and use your backup for any important files you have.
Did you perform a disk check/repair and permissions repair and a PRAM zap before updating? While not required, they are usually necessary to avoid issues.
There are so many reasons for a bad install, that it is impossible to list them all.
Out-of-date software, drivers, etc, haxies, and other software can cause problems.
My three updates were without incident, so it is possible for a perfect update, but unless you supply us with details about your previous system, programs, apps, drivers, etc., it is not possible to figure out what happened.
Again, whenever installing an update to an OS, a clone or other full backup is absolutely necessary, as reading the posts on this board indicate.

Unable to post a journal this month . The journal posted fine prior mnths

Hi ,
We are trying to post a journal like we do every month for 1 facility and this month it gets stuck in processing . The error logs hints to ACCT segment , but the acct code combination being used is a valid one.
The journal is uploaded using Web ADI ... it uploads fine , but errors out during posting . The aacount combination is giving trouble only with 1 facility , others posted normally as they have in prior months.
The log below says : "Please enter a value for the parameter or segment ACCT" , But the ACCT segment is present on the Web adi upload file .
Can some one please provide direction ? I ahve tried to create and post manually too.. same error.
Thanks
General Ledger: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GLPPOS module: Posting
Current system time is 23-JAN-2012 07:22:03
glpmai() 23-JAN-2012 07:22:03PPOS0003: *** Posting Process Started ***
PPOS0004: All phases to posting will be detailed in this log.
PPOS0219: glpmai() - Your Posting Run ID is 17387
glpini() 23-JAN-2012 07:22:03
gllock() 23-JAN-2012 07:22:03
gludlk() 23-JAN-2012 07:22:03<< gludlk() 23-JAN-2012 07:22:03
<< gllock() 23-JAN-2012 07:22:03
glusts() 23-JAN-2012 07:22:03
glucce() 23-JAN-2012 07:22:03
glugsn() 23-JAN-2012 07:22:03<< glugsn() 23-JAN-2012 07:22:03
<< glucce() 23-JAN-2012 07:22:03
<< glusts() 23-JAN-2012 07:22:03
glpuch() 23-JAN-2012 07:22:03<< glpuch() 23-JAN-2012 07:22:03
glpueh() 23-JAN-2012 07:22:03<< glpueh() 23-JAN-2012 07:22:03
<< glpini() 23-JAN-2012 07:22:03
glppva() 23-JAN-2012 07:22:03<< glppva() 23-JAN-2012 07:22:03
glpmpi() 23-JAN-2012 07:22:03
gluddl() 23-JAN-2012 07:22:03<< gluddl() 23-JAN-2012 07:22:04
gluddl() 23-JAN-2012 07:22:04<< gluddl() 23-JAN-2012 07:22:04
gluddl() 23-JAN-2012 07:22:04<< gluddl() 23-JAN-2012 07:22:04
gluddl() 23-JAN-2012 07:22:04<< gluddl() 23-JAN-2012 07:22:04
gluddl() 23-JAN-2012 07:22:04<< gluddl() 23-JAN-2012 07:22:04
<< glpmpi() 23-JAN-2012 07:22:04
glpcjl() 23-JAN-2012 07:22:04<< glpcjl() 23-JAN-2012 07:22:04
glpcbs() 23-JAN-2012 07:22:04<< glpcbs() 23-JAN-2012 07:22:04
glpisl() 23-JAN-2012 07:22:04<< glpisl() 23-JAN-2012 07:22:04
glpiil() 23-JAN-2012 07:22:04
glpiaie() 23-JAN-2012 07:22:04SHRD0118: Updated 0 record(s) in table: GL_JE_HEADERS
<< glpiaie() 23-JAN-2012 07:22:04
PPOS0247: No actual balances were found in the intercompany journals.
glpiiel() 23-JAN-2012 07:22:04<< glpiiel() 23-JAN-2012 07:22:04
<< glpiil() 23-JAN-2012 07:22:04
glphok() 23-JAN-2012 07:22:04<< glphok() 23-JAN-2012 07:22:04
glperp() 23-JAN-2012 07:22:04<< glperp() 23-JAN-2012 07:22:05
glpipi() 23-JAN-2012 07:22:05
glusts() 23-JAN-2012 07:22:05
glucce() 23-JAN-2012 07:22:05
glugsn() 23-JAN-2012 07:22:05<< glugsn() 23-JAN-2012 07:22:05
<< glucce() 23-JAN-2012 07:22:05
<< glusts() 23-JAN-2012 07:22:05
GL_POSTING_INTERIM_17387
SHRD0117: Inserted 24 record(s) into GL_POSTING_INTERIM_17387
SHRD0117: Inserted 0 record(s) into GL_POSTING_INTERIM_17387
glugst() 23-JAN-2012 07:22:05<< glugst() 23-JAN-2012 07:22:05
glpip2() 23-JAN-2012 07:22:05
glusts() 23-JAN-2012 07:22:05
glucce() 23-JAN-2012 07:22:05
glugsn() 23-JAN-2012 07:22:05<< glugsn() 23-JAN-2012 07:22:05
<< glucce() 23-JAN-2012 07:22:05
<< glusts() 23-JAN-2012 07:22:05
PPOS0206: No statistical amounts in monetary journal entries found ...
<< glpip2() 23-JAN-2012 07:22:05
<< glpipi() 23-JAN-2012 07:22:05
glpire() 23-JAN-2012 07:22:05
glusts() 23-JAN-2012 07:22:05
glucce() 23-JAN-2012 07:22:05
glugsn() 23-JAN-2012 07:22:05<< glugsn() 23-JAN-2012 07:22:05
<< glucce() 23-JAN-2012 07:22:05
<< glusts() 23-JAN-2012 07:22:05
glpidff_de_concat_flexfield() 23-JAN-2012 07:22:05<< glpidff_de_concat_flexfield() 23-JAN-2012 07:22:05
Please enter a value for the parameter or segment ACCT.
01CANTP--000-0000-000-00-000000-0000-FACOE-00
SHRD0030: glpire() encountered an error returning from errexit:
<x glpire() 23-JAN-2012 07:22:05
gluerr() 23-JAN-2012 07:22:05Error in ROUTINE: glpire, status: 0
SHRD0043: ERROR:
sqlcaid: sqlabc: 0 sqlcode: 1403 sqlerrml: 25
sqlerrmc:
ORA-01403: no data found
sqlerrp: sqlerrd: 0 0 0 0 0 0
sqlwarn: sqltext:
SHRD0044: Process logging off database and exiting ...
glpuch() 23-JAN-2012 07:22:05<< glpuch() 23-JAN-2012 07:22:05
glpueh() 23-JAN-2012 07:22:05<< glpueh() 23-JAN-2012 07:22:05
glpdit() 23-JAN-2012 07:22:05
gluddl() 23-JAN-2012 07:22:05<< gluddl() 23-JAN-2012 07:22:05
<< glpdit() 23-JAN-2012 07:22:05
PPOS0002: Posting terminated with fatal errors
<x glpmai() 23-JAN-2012 07:22:05
Executing request completion options...
Finished executing request completion options.
GLPPOS - process exiting with failure.
Exceptions posted by this request:
Concurrent Request for "Posting" has completed with error.
Concurrent request completed
Current system time is 23-JAN-2012 07:22:06
---------------------------------------------------------------------------

Hi , Thanks for the reply ... But no luck .
The account is not disabled or end dated as it is used by other faclities in the same batch .
We have total 8 lines in the batch ( 2 lines for each of the four facilities ; 1 Db and 1 cr line each). Apart from the 1st segment (facility number) the rest of the code combination is same for all 8 lines .
If i remove the 2 lines (for 01CANTP) for the trouble maker facility , the remaining 6 lines post normally.
Even checked the value set for facility codes to see if thats disbaled or end dated. But it was enabled.
No changes have been made to cross validation rules since last closing , when the same journal worked.
Any other place where to look ?
     01USAX     503003     000     0000     000     00     000000     0000     COE     00          4,000.55
     01USAX     222099     000     0000     000     00     000000     0000     COE     00     4,000.55
     01USCV     503003     000     0000     000     00     000000     0000     COE     00     248.96
     01USCV     222099     000     0000     000     00     000000     0000     COE     00          248.96
     01USSP     503003     000     0000     000     00     000000     0000     COE     00          845.00
     01USSP     222099     000     0000     000     00     000000     0000     COE     00     845.00
     *01CANTP     503003     000     0000     000     00     000000     0000     COE     00          9,351.19*
     *01CANTP     222099     000     0000     000     00     000000     0000     COE     00     9,351.19*

Last month my data cycle was from the 12th to the 12th. Now for the end of this month its til the 20th. Why are there more days between when my data cycle refreshes from last month?

I guess I said everything in the topic...anyways, from March 12 to April 12 was the data cycle. After April 12 it shot up to May 20th! That's a whole extra week of data that is definitely going to be over because there are more days use data? Why?

G42od wrote:
We share 4gb for our plan. It works out perfectly usually. But this month says the new data cycle doesn't start til the 20th. We've already gone over a gig easily in this extra week. My billing cycle is always set at the 15th of every month and that has not been a problem...until we go over in data and get charged more money. Is the data cycle going to fluctuate every month?
Your billing cycle and your "data cycle" are the same, and that cycle doesn't change, unless you request it or maybe if you bundle services or something. For example, my bill cycle runs from the 18th of one month through the 17th of the next. My due date sometimes varies a few days, not really sure why, probably because not all months have the same number of days. If you look at the breakdown by line on your bill, you will see these dates. What you are describing sounds like the due date is different than usual. All lines on the same account have the same billing cycle for all services...calling/texting plan, data plan, insurance, etc.
I am a little confused, though, because you stated your "data cycle" is always the 12th through the 12th (it would actually be the 13th through the 12th), then you say the bill cycle is always set for the 15th, and then you say the data cycle is pushed to the 20th this month. What is the billing cycle for the voice/text plan? What date did the bill print (this should be on the first page)? Finally, what is the due date on the most recent bill? Bill cycle and due dates are not the same.

Question About the New Update Due out this Month

Hi I would like to know when Apple, does come out with the New update this month will it be for the New iPhone, do out on June 9th,2008 or for the People who have the Old iPhone, that will then be out dated?
Thanks
Lisa*

Firmware update 2.0 will be for all existing iPhones, and for all iPod Touch(es), but iPod Touch owners must pay a nominal fee for the update due to accounting reasons.
Firmware update 2.0 will likely be pre-installed on the 2nd generation iPhone. If not, it can be installed as an update the same as for the first generation iPhone.
Updates for the first generation iPhone will not stop after the 2nd generation iPhone is released. Both will be running the same operating system, with the only hardware difference we know for certain included with the 2nd generation iPhone is a 3G chipset making it a 3G phone.
The first generation iPhone will not become outdated when the 2nd generation iPhone is released. There are some people in the U.S. that don't live in an area where at&t has 3G network coverage, and where at&t doesn't have plans to add 3G network coverage this year or the next.
You purchase a new computer this week, and a new and improved version of the same computer model is released within 6 months or a year. This doesn't make the computer you purchased this week outdated. The same applies to the iPhone.

Inventory day for this month

Hai Expert,
can't help me please i want to use this Query :
1. accumulation of reports to this day for this month
2. selection criteria month
SELECT T0.ItemCode, SUM(T0.Quantity) AS 'Qty Sales',DATEDIFF(DD,T0.DocDate,GETDATE()) as 'No. of days' FROM INV1 T0 INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode GROUP BY T0.ItemCode,T0.DocDate ORDER BY T0.ItemCode,T0.DocDate
thanks for all

Hai Marcella,
i run this my Query and the result is: item no, QtySales, No of Days
i want add this result for find out this month with the incident until this week with the selection criteria
i try Query Mr. Jenkins & Mr Jaya kathan same result with my Query results
Can anyone help me ... because I have to try it several times always error
thanks for all answear my question

We could see MeeGo this month!

Read this, and take note of a few things - "Symbian & MeeGo are quite separate"
1) "MeeGo set to launch on ARM-based and Intel Atom-based devices this month"
2) "MeeGo will be able to run on Intel Atom as well as ARM-based devices. So we could see it running on some budget netbooks as well as high-end mobiles like the N900."
Interesting news, if it is all true...
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

Just been reading that it's coming on the 31st, but it will be VERY basic code, and will not be Dual Bootable (yet). Don't think I will be rushing to this, but rather PR 1.2
http://www.devicemag.com/2010/03/25/nokia-n900-getting-first-meego-os-code-next-week/
http://www.softsailor.com/news/21810-first-meego-code-coming-to-nokia-n900-users-next-week.html
http://theunlockr.com/2010/03/25/meego-comes-next-week-n900s-will-be-able-to-install-it/
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

ADR refuses to run this month

Similar Messages

Maybe you are looking for