ADRMAS and international language versions for Bus Partners
How will MDM address international language versions for vendor masters? Will it allow for matching on the these at this time? Will it copy from load client store in central repository and pass back down to other R/3 and legacy systems?
On Master Data Server (MDS) a Third Party Tool to check country-specific postal data can be connected. However these checks are only possible in the Enterprise Portal User Interface. It will not work during Consolidation (Upload from clients to MDS).
Similar Messages
-
International Address Version for Spanish Language
Hi,
We need to activate International Address Version for Spanish in our system. But i dont find Spanish language in the available Languages activation Screen. Ony Chinese,thai kind of languages are avialable.
If i want to activate Spanish which is not available in the system, what are all the things do i need to do?
Please provide me some inputs on that..
ThanksHi,
in the attachment of SAP note 316331 you will find the following:
Excerpt begin
If you do not want to use the proposed SAP standard international address version keys, you
can also create your own address version keys. You can also use transaction SM30 and
maintenance view V_SAPTSADV to create address version keys in the customer name range
0-9.
Excerpt end
As Spanish (Latin-1) is not typically used as address version key, you need to create a customer specific key ...
But please note that this is a rather unusual approach:
Most customers use address versions for Non-Latin scripts only.
Best regards,
Nils Buerckel -
How can I permanently change the language interface of Firefox 4 Beta to English?
Computer is running on Swedish Windows XP.
Found that the advice on similar questions is to install the language version of the desired language on top of the current version but I haven't found different language versions for 4 Beta, only 3.6.8.
Have also tried to change general.useragent.locale (about:config) to en-US but to no avial.Hello,
If somebody has installed the multi-language package is there a possibility the language to be changed without reinstalling the browser?
Best regards,
Yuli -
Internation Address Version for Customer and Vendor Master
Hi Everyone,
There are a few fields on the General Data screen which are overwritten by value in the International address version and vice-versa. I am listing these fields below and I would like to know if this is just standard SAP functionality or did something change in our system after upgrading to ECC 6.0.
Communication Language
Postal code
Telephone
Mobile phone
Fax number
Email address
Thanks for your help!
SheetalI would assume that this is standard functionality, as e.g. it does not really make sense to have different communication languages in the address versions. It is just the opposite: if you have two address versions (e.g. standard and kanji) it is quite important to stored the information about which is the preferred communication language of the customer.
Regards
Martin -
I have an old 3G as well as a 4S. Initially I set up a separate iTunes account for the 4S as I was worried I'd lose my old apps for 3G (as older, compatible versions aren't kept in the iTunes store so once they're gone, they're gone...). 3G is set up to sync with iTunes, 4S is inly syncing mail and conatcts through Exchange but hasn't been synced with an iTunes library for the reason above.
Is there a way to sync both phones off the same iTunes account, so I can set up each phone with some music, as well as apps, without iOS 5 versions overwriting the exisitng apps for the 3G?
To complicate things further, I don't want to sync photos, contacts, messages, etc. I just want to avoid having to duplicate all my music and pay for all the apps all over again. Suggestions?
CheersHi gail,
Thanks for the quick reply! The music part makes sense, good to know I don't have to duplicate the lot. The big question stillr emains as to whether iTunes can cope with two different iPhones, running different versions of the iOS, and therefore different app versions.
Currently all the apps in iTunes are years old, and many haven't updated in months (years?) because the 3G is running iOS 4.2.1 (and can't be upgraded). Many of these have since been updated in the iTunes store (for the various incarnations of iPhone since) and the old versions that my 3G requires have been replaced.
I'm worried that syncing the 4S running iOS 5, and running the most recent updates for same apps, will cause iTunes to overwrite the old 3G compatible ones when I sync. Unless iTunes is smart enough to know which version of the app is for which OS, without updating the legacy version when I update the apps on the 4S?
You guys shouldn't face that problem, as iPad and iPhone apps don't replace each other (I believe? Not sure about this) as new updates are released for each app, you'd have a copy for each device (for example Evernote for iPad, and Evernote for iPhone). I can't figure out if iTunes can handle keeping separate iPhone versions for Evernote iOS 4.2.1 and Evernote for iOS 5. My gut feeling is no, but I want to amke sure before I lose the legacy versions of each app.
Of course, maybe I'm just paranoid and iTunes is in fact perfectly capable of keeping old and new apps in the same library?
Cheers -
Manadatory SP stack and which kernel version for source Release 4.6c
Hello!
I have the following questions:
- Which support package stack and which kernel version are mandatory for Source Release 4.6?
- Has the SAP Business connector still any supports?
And some additional question regardind connection Lotus Notes with ERP 2005:
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
Can anyone help out or recommend how to proceed?
Thank you!
Regards
AxelFirst I would like to recommend getting a good basis consultant to do that whole process. If you have never done such kind of big technical upgrade/conversion before it can become a totally frustrating experience.
> Do you all do Unicode Conversion first before going for upgrade process ?
4.6c is not available as Unicode. During the PREPARE programs/transactions will be imported to the 4.6c system where you have to run all the preprocessing step mentioned in the Unicode conversion guide. After that is finished, the system is upgraded and immediately after the exported and to be imported as a Unicode system.
Anyone have experience in doing CUUC to EHP4 under single upgrade ? My colleagues have upgraded 4.6C -> ERP 6.0 for EHP 1 only and we want to perform EHP4 and Unicode Conversion under single project. Appreciate anyone advice on this.
There are many many things to look after, too much to list here in a forum. As suggested I'd consider getting a basis consultant with experience in that area.
Markus -
Can we keep the original record as it is and create a version for it
Hi All,
My name is Rafi.
I am creating an application in apex and stuck.
I have a table called Employee_master which stores all the information of employee.
But the problem I am facing is that when a record is updated then it is over writing the original record(In employee_master) which i don't want. Instead of updating the original record it should be stored as version and the original record will be as it is(so that the original record can be tracked easily).
Now suppose if the employee is again updating the record then the saved version should be updated not the original one.
To do this what I need to do.
Waiting for your reply.
Regards,
Rafi Tamboli
Edited by: user13838355 on Feb 12, 2011 11:31 PMHi Rafi,
Create a second table that has the same structure as the employee_master table.
Then, in Apex, use the second table as the one that the user can insert and update to.
Create a trigger on this table that runs for INSERT only and copies the data from the new record into the employee_master table.
Andy -
Trial Matterials - and - or Betha Versions for Training.
_I am informing the use of beta versions - and - or trial
matterial software only; for training purposes which, will
been them on a regular use onto a new final qualification.
(See more info at the "Apologizement Statement" 2013).
Thanks to your business.
Sincerely:
ZooguyIII.This forum is only to discuss how the forums operate, not products
If you go to the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the Adobe product(s) you use -
Have Acrobat 6.0 and 9.0 installed. I need 6.0 for distiller function. Whenever I try to open a .pdf file in a site I get an error message that Acrobat has a problem and the file will not open.
Good day,
You can initiate a Repair installation from Control Panel > Programs by clicking on the Acrobat 9 installation, choosing 'Change' then following the prompts for a repair install.
I missed the part where you mentioned the error was occurring on launch. Sorry about that.
Kind regards,
David -
One of sever glitches that led me to "downgrade" back to mountain lion. However, wasn't thinking and updated safari to 6.1 and I now have the same problem. It took me a while to figure out, but now it is completely reproducible. When I visit youtube and watch a video. Safari's look-up, the three finger tap dictionary shortcut, no longer works. It just highlights the word momentarily but never completes the function.
I'm going to restore my laptop again to factory setting and just not upgrade the software to the new Safari update.
The main issues/bugs I had with Mavericks, even after a clean install were:
- pdf's very freezing while scrolling for a few seconds
- frequent spinning pin wheels
- other small random bugs I can't recall at the moment.
Macbook Air mid 2012 i7 8g ram 256gbHDThanks,but the problem seems to show up only after extended use of the computer.Today,for example,I didn't go to work,and turned the PC on in the morning,and by early afternoon,it was getting more and more sluggish.It finally got so bad that it locked up,and even CTL-ALT-DEL wouldn't work.
-
International version for one-time vendor
Dear all,
is it possible to bring out the international version screen when booking the one-time vendor invoice?
Thanks and regardsHi Tao,
I am facing the same problem. I maintain the international address versions for TW (language ZF - Chinese tranditional). It works just fine for regulat vendors, however when it comes to a one-time vendor (account group CPD), I can only enter either the English or the Chinese name in the one-time vendor screen, during the invoice entry.
I checked the international version is maintained in FK02 of the one-time vendor. Where and how do I enter the vendor name in EN anf ZF in the same document?
I also am struggling with the account holder field, which is unavailable for one-time vendor.
Please advise.
Thank you,
Inna -
Makefile for building 32 and 64 bit versions of a driver/app
Does anyone have good example Makefile that can build both a 32bit and 64bit version on device driver and userspace programs? I'm using gcc and gmake to build a streams module and some user space utilities for both 32 and 64 bit x86 and Sparc architectures. I currently have a bunch of taget specific make files, but I know there must be a better more elegant way of doing this. Ideally I would like to build both the 32 and 64 bit versions for the running architecture with the same make command. I don't need to cross compile (ie. build sparc on x86 ).
Yes, with Creative Cloud you will have both 32 and 64 bit versions installed. 32 bit is useful in cases when you have a plugin that only supports 32 bit, not 64 bit.
You might check below forum discussion as well.
http://forums.adobe.com/message/4737722 -
Excise Invoice number and Internal Number
Hello Friends
I have some queries ,I will be thankful to you if you could guide me, in understanding themu2026
1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
Thanks
Siddharth1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
-->> Ex inv nbr will be entered based on the vendor ex invoice .. this is external nbr assignment
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
--->> there is no relation between grpo vs. ex inv nbr
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
>> u can see in J1I7 or thru table J_1IPART1
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
>> wait for others answers.. -
Flex SDK and AIR runtime version in mobile
Hi, guys.
I'm trying to make my first Flex mobile app.
I'm a little confused about the relationship between Flex SDK and AIR runtime versions for mobile development.
In the "Developing Mobile Applications with ADOBE FLEX 4.6 and ADOBE FLASH BUILDER 4.6" pdf document, it says:
"AIR requirements
Flex mobile projects and ActionScript mobile projects require AIR 2.6 or a higher version. You can run mobile projects on physical devices that support AIR 2.6 or a higher version of AIR.
You can install AIR 2.6 or a higher version only on supported Android devices that run Android 2.2 or a higher version. For the complete list of supported Android devices, see Certified Devices. Also, review the minimum system requirements to run Adobe AIR on Android devices at Mobile System Requirements.
Note: If you do not have a device that supports AIR 2.6 or a higher version of AIR, you can use Flash Builder to launch and debug mobile applications on the desktop."
So, I go and check the Certified devices in http://www.adobe.com/devnet-apps/flashruntimes/certified-devices.html and find that the minimun FLASH PLAYER version accepted by ALL devices is FP 10.1
1. Does this mean that if I want to release an app to target ALL mobile devices, then I can only use Flex 4.5?
2. Do support for Flash Player mean the same than support for Adobe AIR? Or the application will prompt the user to install whatever version of the AIR runtime and all of them would be supported by the device, even in the FLASH PLAYER support is for a lesser version?
Thanks!Thanks for your help, Flex harUI,
The first impression that comes to mind is that FP version is indeed only for the web browser plugin. Then, why does the official Flex 4.6 mobile development documentation have a link to that page that only speaks about the supported FP version in mobiles under the title "AIR requirements"??
This makes it way too confusing.
Do you know whether there is something like an equivalent matrix/list of mobile devices with their supported AIR runtime versions? I went a great deal in trying to keep my original app under 400kb... I didn't know that in the end it would end up weighing 9.5Mb... :S
Thanks again, -
Usage of Cost Centers, Profit Centers and Internal Orders
Hello everyone,
i have perhaps for some of you a simple question but it bothers me alot.
Imagine we are using Cost centers and Internal Orders. For them we create statistical key figures using transaction KB31N.
Now we are installing SAP BI and want to create a report which would be generated acording to cost centers but with statistical key figures.
The question would be how to make a connection between cost centers orders and those stat.key.figs?
In our case the economists say that we are using this kind of scenario:
Dist.chanel ->
Sender: Cost center, Cost element
Receiver: Int.Order
and Stat key fig.
This is the only place where we have a connection between thos objects. Is there other way how to connect them. perhaps using profit centers?
If somebody didnt understand it, maybe ill try to explain it a bit better
Reagards
Laurynas PrikockisHi Laurynas,
Pls try to understand the concept as explained hereunder...
Cost Element:
Primary Cost Element : Replication of GL to bring costs into CO module when they are posted in FI
module
Secondary Cost Elements: Carriers of costs between two Cost Objects (when we want to transfer the
cost from Cost Centers to Internal Orders, vice versa and more, we create
Secondary Cost Elements to carry the costs and transfer them to the
reciever objects from sender objects)
Cost Center: It is a Cost Object, maintained on long-term basis, where we can capture the costs (Ex:
Marketing Cost Center)
Internal Order: It is also a Cost Object, maintained on shor-term basis, where we can capture the costs
(Ex: Internal Order for Special Marketing Campaign). Ultimately, whatever the costs
posted to this Internal Order, will get settled to Marketing Cost Center.
Staitistical Key Figure: It is used as a basis for allocation of certain expenses (Simple example would
be, Total rent paid for office is $100000 per month. This cost has to go to
different Cost Centers like Finance and Accounts, Marketing, Purchase Dept
etc on the basis of "Area Occupied". So, We will define "Area Occupied" as a
Statistical Key Figure in our system.
Now, when the Rent amount is posted in FI, it wil reach a Virtual Cost Center
(An "Allocation Cost Center" with name "Rent" to be created under your
Controlling Area) "Rent". From there, it has to reach the other Cost Centers (lie
F&A etc as explained above) on the basis of Area Occupied (SKF Created
for "area occupied")
For this, you need enter the Area Occupied values (Ex:Sq Ft) in KB31N and you need to create an Allocation Cycle (Distribution / Assessment) where in you will select "Area Occupied" (SKF) as your Receiver Tracing Factor.
I hope I am clear, don't hesitate to revert back for more explanation...
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Mar 3, 2009 7:26 PM
Maybe you are looking for
-
IMessage sent from iPad to iPhone never reaches destination
Just tried to send a test iMessage from my iPad iOS5 to my iPhone 4GS, and it doesn't seem to reach the phone even tho the iPad reports it as "delivered". Anyone else experience this?
-
Cover Switch for toshiba LS35 laptop
I have an issue with my laptop where the screen will behave as if the cover is closed when any pressure is placed on or around the opening on the base of the laptop that receives the little locking tang that is on the inside cover (screen side). If
-
Patch for bug 5397515 or alternate for query please
Hi I am running following query on 10.2.0.3 but giving me internal error. Came to know that its a bug 5397515 fixed in 10.2.0.4. I want to know is there any patch available to resolve just this bug without shifting to 10.2.0.4. or any alternate for t
-
I am unable to connect to the itunes store to update apps on my ipad. I have tried both wifi and cellular connections. I have the most recent updates of the operating system and itunes. I have powered down and reset and restored. I have no problem pu
-
Can we get the parent form data to child form while provisioning?
if it is possible can anybody tell me how to do this?