ADS and JDI installation
Hello,
I want to install WAS 6.40 (Java+ABAP) and also ADS and JDI. Can we install ADS and JDI (servies) later? or must be installed initially along with WAS 6.40.
Thanks in Advance,
Immy.
Hello,
ADS and JDI can be installed after webas installation
Regards
Abdul
Similar Messages
-
WebAS 6.40 SP10 and JDI (SP09) out of sync
Hallo all,
my JDI installation (SP09) is out of sync with the WebAS on which it is running (SP10). What do I have to do in order to lift the JDI on SP10? Can I go ahead and apply JDI SP10 or is there another way of getting WebAS and JDI into sync again?
As a side note: I have already started to configure DTR and CBS and failed when trying to run the CMS WebUI for configuration purposes. That's when I became aware of the problem.
I greatly appreciate any help on this!
Best regards,
HelgaHallo Michael,
thank you for this information! I have found this out and got it fixed myself just shortly after posting my question ;).
BR
Helga -
Hi All,
<b>Solution Manager:</b>The SAP Solution Manager supports you throughout the entire lifecycle of your solutions, from the Business Blueprint thru configuration to production operation. It provides central access to tools methods and preconfigured content, that you can use during the evaluation, implementation, and productive operation of your systems.
whereas
<b>Java Development Infrastructure:</b>SAP NetWeaver Java Development Infrastructure (also named Development Infrastructure). It enhances the concept of an IDE by server-side services, which centrally provides the development teams with a consistent development environment and supports the software development during the entire life cycle of a product(Dev->QA->Prod).
can we correlate and establish a linkage between
Solman and JDI if so what points we you will consider.
Your inputs will be highly appreciated....
Regards,
RKHi Venkat,
good question.
Short answer is: the Solution Manager is a tool to ORGANIZE changes in a System Landscape, the NWDI is the tool to PERFORM the task for Java Development.
So both tools are meant for the same task, but on different layers. The Solution Manager uses the NWDI to perform Java Development and Modification. Besides, the Solution Manager is using a few more tools to perform the tasks, that are described by it (e.g. Software Lifecycle Manager, TMS, ...).
Have a look at the <a href="https://websmp206.sap-ag.de/instguidesnw2004s">Installation Guides for NW2004s</a> --> Installation
Best regards,
Timo -
Remove Pop-up ads and windows in safari and firefox?
How do I get rid of the endless pop-up ads and windows in safari and firefox? They have been happening for about a month. I ran EtreCheck:
Problem description:
Pop up ads and windows appear nearly continuously in both Safari and Firefox. Has been happening for about a month.
EtreCheck version: 2.1.8 (121)
Report generated February 20, 2015 at 3:20:43 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 368
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
Thunderbolt Display 2560 x 1440
System Software: ℹ️
OS X 10.9.5 (13F34) - Time since boot: 4:3:53
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 749.30 GB (386.58 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Display)
Apple Inc. Apple Thunderbolt Display
Apple Inc. Display Audio
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Conduit [Adware! - Remove]
Downlite [Adware! - Remove]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[running] com.vsearch.agent.plist [Adware! - Remove]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[running] com.perion.searchprotectd.plist [Click for support]
[not loaded] com.vsearch.daemon.plist [Adware! - Remove]
[running] com.vsearch.helper.plist [Adware! - Remove]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
Box Sync Application (/Applications/Box Sync.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
net.juniper.DSSafariExtensions: Version: Unknown [Click for support]
AdobePDFViewerNPAPI: Version: 10.1.10 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Yahoo! Installer 3: Version: 1.0.128 [Click for support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.3.4 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 10.1.10 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
WebEx: Version: 1.0 [Click for support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 [Click for support]
Safari Extensions: ℹ️
Trovi Search for Safari
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Growl [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 749.30 GB Disk used: 362.72 GB
Destinations:
My Passport Studio [Local]
Total size: 1.00 TB
Total number of backups: 6
Oldest backup: 2013-09-12 15:08:12 +0000
Last backup: 2015-02-19 14:34:17 +0000
Size of backup disk: Too small
Backup size 1.00 TB < (Disk used 362.72 GB X 3)
Top Processes by CPU: ℹ️
7% WindowServer
5% coreaudiod
4% Safari
1% ocspd
0% com.apple.WebKit.WebContent
Top Processes by Memory: ℹ️
292 MB com.apple.WebKit.WebContent
241 MB mds_stores
172 MB AdobeAcrobat
155 MB Microsoft Outlook
146 MB Safari
Virtual Memory Information: ℹ️
3.72 GB Free RAM
2.74 GB Active RAM
746 MB Inactive RAM
1.38 GB Wired RAM
580 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 20, 2015, 11:15:39 AM Self test - passed
Feb 19, 2015, 04:44:18 PM /Library/Logs/DiagnosticReports/Microsoft Excel_2015-02-19-164418_[redacted].hang
Feb 19, 2015, 08:08:55 AM /Library/Logs/DiagnosticReports/mds_stores_2015-02-19-080855_[redacted].crash
Feb 19, 2015, 08:07:42 AM /Library/Logs/DiagnosticReports/iPhoto_2015-02-19-080742_[redacted].hang
Feb 18, 2015, 02:51:55 PM /Library/Logs/DiagnosticReports/mds_stores_2015-02-18-145155_[redacted].crash
Feb 19, 2015, 04:43:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-02-19-164305_[redacted].craPlease review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/ -
What steps should be taken to completely remove a JDI installation? We installed the JDI in our dev environment and would like to remove the installation from our sandbox environment. Will undeploying the SCA's in the SDM do the trick or are more steps required? Any help would be appreciated.
Thanks,
Wally BennettYou can remove the JDI installables by undeploying JDI sca's using SDM. If you still face issue, please mail me...
regards,
Ranjeet -
JDI installation on ep7 sp9 , aix
Hi all:
We would like to some some customization on leave request on ESS in ep7.
We want to install JDI server for EP7, sp9.
During EP installation, we did not install JDI.
Can we install JDI server independently ? Where can we find install files ? Where can we find installation guide ?
Thanks a lot.Hi jianhong,
you'll need to install a separate Java System and then deploy the JDI components into it and configure them.
In detail, it's:
- take care that the correct java version is installed on your server, for AIX see SAP notes 1024539 and 716927
- installing the SAP java system, depending on the database - software you can download the installation guide from http://service.sap.com/instguides => Netweaver 7.0 => Installation (there you'll find planning guides, installation guides, etc.)
- installing the Support Package Stack - I suppose you'll need SP09 - see http://service.sap.com/sp-stacks
- configuring SLD (if you do not already have one, you'll need an SLD for the JDI, see download the installation guide from http://service.sap.com/instguides => Netweaver 7.0 => Installation => 5 - Configuration => Post Installation Guide - SLD...
- then deploy the JDI (= NWDI): you'll find the sca-files under http://service.sap.com/sp-stacks - you'll need: JDI BUILD TOOL 7.0 SP09 (SAPDEVINF...), JDI ONLINE 7.0 SP09 (SAPBUILDT...) and JDI OFFLINE 7.0 SP09 (SAPDEVINFF...)
- configuring JDI - see also: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b2b146-5776-2910-4a8f-9b3190eab060
Hope that helps as a start.
Regards
Cornelia -
How do I block Mackeeper adverts and random pop up adverts from popping up every time I click on a new tab another ad pops up, and it is getting very annoying. I've tried clicking Safari>security and block ads, and deselected plug ins but they still come up.
There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
com.something.daemon.plist
and
com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/ -
Whenever I open Facebook through Firefox I get pop up ads and such. I do not seem to get this when using other browsers like Safari or IE. It's sooo annoying!!! I will use another browser until it's solved.
Since you have encountered the problem at other sites, not just Firefox, I'd bet that it is an Internet Explorer problem, not the web sites. Actually, I am sure it is an IE problem.
Try running Windows Update, perhaps there are some updates for Internet Explorer that might resolve the problem. If you don't know how to run Windows Update, use the Help on your system to look for information on Windows Update.
If that does not help, use Google to search for information on IE9 locking up when downloading.
Stan -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
i've downloaded some free games for my iphone4 but they are using my internet because they have ads. does anyone know if there are any games that don't have these ads and don't require internet AT ALL?and if i disable my internet connexion, does it help?
Thank you. I put it in airplane mode like you suggested, but it looks to me like all the applications and ads are still running. Anyway, I'm just gonna play when I'm really really bored and use them as less as possible. Thank you again for your quick answer.
-
Serenityvalley wrote:
You need to go to This Page and download just about everything on it -espeically the System Update Deployment Guide and start reading. It'll take you a few hours to learn what you need to do and implement it if you are familar with editing system registeries and you have some luck and everything goes well.
You do NOT need to edit registry, just use Thin Installer instead of System Update on the clients. And there is no need to wade thru the deployment guide if you are setting this up in a home environment for just one or two clients.
Edit: Note that Thin Installer does not run on Vista SP2 (neither does System Update.)
Here are the few simple things you have to do:
1. Download Update Retriever (UR) and Thin Installer (TI) from here.
2. Install UR on one pc and TI on all clients you want to keep updated. UR installs into the Start -- All Programs -- Thinkvantage folder, TI installs into c:\program files\thininstaller.
3. To initialize Update Retriever:
a) specify the download folder, pick a place all clients can access. Create a new folder, TI will be confused if there is other stuff in it.
b) change the settings to Severity -- Optional (assuming you want to see critical, recommended and optional downloads in the list), License -- Do not display and Status -- Active. After clicking next you enter the machine type, the op system and its language for each client you need to keep updated. Note that unless you change status to active everything will download as "test" and thus not be installed by the Thin Installer.
4. Run the download, about 1 - 1.5GB for the first type, opsys and language combination and an additional 0.5 - 1GB for each additional type depending on amount of overlap. You can be selective what you download but if you are an average home user -- just download all the items for your type/opsys/language combination(s) -- Thin Installer is a stripped down version of System Update and will decide what to install on the individual client. This is a one-time download, next time you run Update Retriever it will just download new drivers.
5. To initialize TI on each client, copy the program from the Program Files directory and paste a shortcut to the desktop. Then rightclick on the shortcut and choose Properties, and in the target field of the shortcut tab after "C:\Program Files\ThinInstaller\ThinInstaller.exe" add the following: -repository your_UR_download_directory.
6. Run the Thin installer on each client, it will perform exactly as System Update did, down to making the same mistakes that System Update did.
7. As the date is getting close when Windows Update will start distributing Vista SP2 you may want to consider using Microsoft's SPBlockerTools preventing SP2 installation for up to 12 months.
8. Debugging Tips
TI ending with message An error occurred while gathering user information is reported when running under Vista SP2 -- TI will not run in SP2.
Getting TI to "see" the database downloaded by UR is the main problem. If TI ends with a message saying corrupt or not found database you probably made a spelling mistake in the directory specified in the -repository parameter. If TI ends with a message saying no applicable packages to install it can mean a number of things:
a) If you are unused to modifying the parameters in a shortcut you may have added -repository to the second field in the shortcut tab instead of the top field labeled Target, the two fields look very similar or you just made a typo in "-repository".
b) Open UR again and first choose Modify settings on the left and double check that the directory there is the same directory you specified in -repository. Then choose Manage repository -- Update view and double check that all packages have status Active. If they don't it's not necessary to download again, just select all and hit the modify button to change status from Test to Active.
c) In C:\Program Files\ThinInstaller\logs there are update logs from TI. Open one using Notepad and in edit menu search for the string
Message: 'Share name' to use:
This will tell you in which directory TI is searching for the updates. If it can't find a -repository parameter it uses an empty default databse
d) If you used System Update regularly up to when it stopped working on April 1 and if you have an older model with not so many new driver updates it may actually happen that there are no new updates for your machine (even though you downloaded a lot.) Go to here and enter all fields except model to see what Lenovo shipped after April 1. (Don't click on driver matrices, staying on the downloads and drivers pages will give you a list in chronological order with the ones after April 1 at the top.) Also be aware that the database UR downloads from is at least 2 weeks behind when the drivers first become available on the web. Right now, the only new download in the database applicable to most notebooks after April 1 is the Access Connections 5.22 driver. To check what release you have installed open Access Connections and go to help.
I just did a clean install of a Vista64 system on my T500 and after installing the first few drivers manually (including drivers for harddisk and ethernet) let Thin Installer install the remaining 36 items for me. The only item left to fix was the known bug in the Ricoh 4 in 1 card driver SU installation. (For a clean install you need to run TI or SU more than once, it doesn't find all drivers the first time.)
Message Edited by JaneL on 05-08-2009 10:30 PM
Message Edited by zilla on 2009-05-28 12:48 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.koolzero wrote:
When I start TI after I pointed it to my repository I get a message that no packages applicable were found. I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
Assuming the items you did download were not already installed on your client with TI it should work.
Message Edited by zilla on 2009-05-06 10:23 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500. -
can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave
Start here:
iOS: Device not recognized in iTunes for Windows -
I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot
I guess that was a bit cryptic. I'm trying to update iPhoto from system 10.5.6, a PowerPC system, to 10.8. The app I downloaded is iPhotoLibraryUpgrader.dmg. I open that and I see Iphoto Library Upgrader.pkg. Igo through the install, which says it completes successfully. However, when I double-click on the iPhoto icon on the dock, I get the oroginal message that the upgrade must be installed. I hope this gives enough information to diagnose the problem. I apologize for the first message's laack of detail.
-
Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?
Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648)
Maybe you are looking for
-
How to generate a list of Devices based upon an eDir group
Is there a way for us to generate a report/query of devices (we need model, etc) where the calculated user for each device is a member of an eDirectory group? Basically, we need to generate a list of machines in our "HR" department or "Finance" depar
-
Hi I'm new to the iCloud, and I wonder how I can change my name @ the LogOn screen from iCloud (next to my picture) regards
-
Passing message text from external RFC server into SAP EXCEPTION parameter
In function module CREDIT_CARD_SETTLEMENT the following DYNAMIC function module call exists: ------ Send items for settlement to a RFC function ------------------- CALL FUNCTION l_fnset DESTINATION l_rfcset EXPORTING i_ccseth
-
hi, I need to load data into tables before loading data I have several folders like a1, a2,a3... each folder 'll contain a several .csv files. I need to load those csv files data into destination based on folder wise Thanks AVS
-
Satellite P205D - Does line-in port accept vcr signal
Help with video import P205D, will line-in accept vcr signal? Trying to import video to burn to dvd. Did not realize i was such a newbie.