Ads are popping up when I open up new browser windows..HELP!

Every time I open up a new tab I get hit with adds. Also, when I do a google search, it will take over the google search results and put in different adds. Any idea how I can get rid of this? 

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Similar Messages

  • How do I set the desired search enging when I open a new browsing window?

    When I open a new browser window, I used to get the Bing search engine option but now only the Yahoo search engin is shown. How do I reset the system to show Bing when opening a new browser window? thanks.

    I'm going to go out on a limb and guess that you've got a custom timecode field somewhere in your production and/or asset metadata group(s), right? And I'm going to further guess that this timecode field has dashes in it like this --:--:--:--, right? If so, try this: Click the arrow next to the timecode field and adjust the timecode so that it has a number (it doesn't matter what the number is as long it's not dashes - "00:00:00:00" is fine). Then Save this asset, close it and then reopen it and see if the beeping madness has vanished. Then, to make this change permanent for all of your new assets, make sure to edit the default value of any custom timecode fields to put zeros (or some other numeric default value) into them when a new asset is generated. If the asset still beeps when you open it, check the other metadata groups in your set to see if there isn't another empty timecode field lurking in the shadows.
    Jason

  • Why do ALL browser windows open when I open a new browser window

    I don't know if this is a feature, but I find it ANNOYING. Say I have 2 browser windows minimized. I decide to open another window. Why do ALL minimized browser windows and how can I stop it.

    Found solution. Had to disable Ask.com toolbar.
    <<< The Solution
    The ASK.com Toolbar can cause other windows to get maximized.
    Start Firefox in Safe Mode to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    Don't make any changes on the Safe mode start window.
    https://support.mozilla.com/kb/Safe+Mode
    https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    >>>>

  • When you open a new browser tab, underneath the box to type in what you are looking for is the recently visited list. I want to disable or delete this list...how do I get rid of this list???

    When you open a new browser tab, underneath the box to type in what you are looking for is the recently visited list. I want to disable or delete this list...how do I get rid of this list???

    The drop-down list displays items from your History and/or Bookmarks.
    You can control what shows (or nothing at all): Options > Privacy, "Location Bar" section. Options are:
    *History and Bookmarks
    *History
    *Bookmarks
    *Nothing
    See --> https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Open a new browser window when click a button

    Hi,
    I am working on Apex - 3.2.0.00.27.
    I want that when I click on a button, it should open a new browser window. I have tried to set property on the button , direct to url , html = _blank.
    but somehow it is not working.
    can you suggest something ?
    Thanks in advance.
    -Jasmine

    Hi,
    Even if i create different regions , it is not possible for me to place them between items.
    But anyways, I created a separate button in the same region and it works fine.
    Thanks Jari for your help.
    -Jasmine

  • Unable to Open a New Browser Window

    I have a couple users who are having trouble logging in to Discoverer on new PCs. They are using Internet Explorerer 8. They are able to get to the login screen, but when the hit connect (or Go) they get an error: "Unable to open a new browser window. Ensure that you do not have popup windows disabled for this site."
    Obviously the first thing I had them do was turn off the popup blocker all together. But they still get the error (even after they restart their PC). Other than that, is there something I am missing in how they need to configure IE8? I'm personally used to using IE6 at work and don't know much about configuration setting for IE8.
    Thanks!

    Hi,
    Exactly not sure,see if there are any pop-up blockers still exists,if so try turning pop-up on and off and check it.One more thing what java plug in are you using?? May be it perisists due to java also.
    Best Wishes,
    Kranthi.

  • How can I open a new browser window!!!  Very Challenging!!!

    I have a form (name=MAIN) with a submit button (name=Button A). Button A opens a new browser window (name=SEARCH), via an HTML form target tag (<FORM TARGET=A>). Window SEARCH has multiple submit buttons (10-15). Each button has a different action which is handled by a servlet (form name and button name are passed to a servlet as a hidden field in the form to determine the action), which is setup to be an action handler. When a button in the SEARCH window is clicked the results are retrieved from an Oracle database and should be displayed in the text fields in window MAIN.
    For example, some results may be displayed in window SEARCH (_self) and and other results may be required to be sent to window MAIN depending on the button clicked.
    How can I setup window SEARCH so each button can have a different target window (some may be window MAIN or other windows)? Using a form tag for each button doesn't give desirable results. Is there a way to do this with JSP or some form of Java code?
    A form tag can only have one target. Basically I have one form with multiple submit buttons. How can I get it to send each submit buttons results to a specific window?
    Thanks.

    <!-- try this -->
    <script language="JavaScript1.2">
    function mysubmit(mytarget){
    document.myform.target=mytarget;
    document.myform.submit();
    function validation(myform){
    //validation stuff
    return [true | false];
    </script>
    <form target='none' name='myform' action='myaction.jsp' method='post' [onsubmit='return validation(this)']>
    <input type=button name='submit1' value='submit1' onclick='mysubmit("target1")'>
    <input type=button name='submit2' value='submit2' onclick='mysubmit("target2")'>
    <input type=button name='submit3' value='submit3' onclick='mysubmit("target3")'>
    <input type=button name='submit4' value='submit4' onclick='mysubmit("target4")'>
    </form>

  • Pdf links will not open in new browser window

    I have created a pdf document in Acrobat 9 Pro that is password protected. You must enter the password to open it. In this document there are perhaps 15 links to other pdf documents. I set up each of the links to open in a new window. The links work as expected in Acrobat, each opening in a new window, however, when I posted the documents to the web, the links open in the same window as the original document. This would not be a big issue if the original document were not password protected, but each time the user clicks on a link, it takes him out of the original document. To get back to the original document requires re-entering the password. This is a major irritation with so many links.
    I know that you can set Acrobat to display the documents in its own window rather than in the browser, but my users don't know that. Control clicking on a pdf link does not open it in a new window as it would with an HTML link. Is there a simple fix to this problem that does not involve user intervention?

    Well, I came up with a solution, thanks to Ted Padova who offers a simple JavaScript solution on his blog at http://www.acrobatusers.com/blogs/tedpadova/opening-pdfs-new-browser-windows.
    The solution is clearly laid out even for beginners, if you know how to create a link or button.
    It seems to me that a prime objective of Adobe in developing Acrobat would be to have it behave the same way in free-standing mode and as a plug-in. In this case it does not, and obviously, it has not for the last forty-eleven years that Acrobat has been on the market. Maybe some day they will get around to a fix for this obvious problem. In the meantime, read Ted's blog and be happy we have guys like him who can solve these problems.

  • File Open Issues - document library pdf file to open in new browser window

    Hi
    I have a requirement to open the document library containing pdf file to open in new browser window. So far I have tried following steps but could not get it to work.
    1. Changing Document library advance setting to open the document in browser (have tried others as well).
    2. SharePoint web application setting changed as Permissive instead of Strict. Here the pdf file opens in browser but redirect from document library instead of new window(Also tried adding Target=”_blank” and no change).
    3. Executed the powershell script to adding MIME type to see if it works but no change.
    $webApp = Get-SPWebApplication http://SharePointSite
    If ($webApp.AllowedInlineDownloadedMimeTypes -notcontains "application/pdf")
    Write-Host -ForegroundColor White "Adding PDF MIME Type..."
    $webApp.AllowedInlineDownloadedMimeTypes.Add("application/pdf")
    $webApp.Update()
    Write-Host -ForegroundColor White "Added and saved."
    Else
    Write-Host -ForegroundColor White "PDF MIME type is already added."
    4. Open the Doc library and modified ALLItems.aspx to add Target= “_blank”
    5. I have already tried solutions suggested in the link:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9db08c4a-b53c-419a-84f8-001c194d1311/how-to-open-sharepoint-document-library-pdf-file-in-new-window?forum=sharepointadminlegacy
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/530e2ea1-d77d-491c-935f-04f536e439a5/open-a-pdf-document-to-a-new-browser-in-the-document-library-web-part?forum=sharepointadminlegacy
    http://mindsharpblogs.com/todd/archive/2005/08/16/654.html
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/7b6091df-4657-4799-ba02-259ebd7e4b7c/pdf-doesnt-open-in-document-library?forum=sharepointadminlegacy
    Appreciate if there are any working solution from any of you. Many Thanks

    I found a solution which works only in the development. No idea when I compared, Browser MIME type is enabled, STRICT browser type is configured for web application. on the document library advance setting, default to open in new browser. Both configurations
    are identical but I am able to open pdf file in new window in my developing using jquery script
    http://blog.ithinksharepoint.com/2011/02/21/open-pdf-files-from-a-document-library-in-a-new-window/ but the same does not work on production server :(
    Any help experts?
    Thanks

  • How to open a new browser window from a JSP page?

    Hi,
    I am picking up records from the database and displaying each record in a seperate text area field using the JSP code. I should be able to display the content ( available in the text area) in a seperate window if the user clicks on one icon.
    Is it possible to open a new browser window using JSP? If yes, how can I write information on the new browser window?
    Thanks in advance.

    Is it possible to open a new browser window using JSP?a JSP page is also an HTML page, this is client side stuff, you can do it with JavaScript.

  • Want to open a new browser window and display the html file in locale disk.

    Hi,
    I want to open a new browser window and display the html file in local drive. The below html applet work in local system successfully. But i deploy the same in web server (Tomcat) and try the same in client machine it does not work. Please help.
    Note:
    The class below fileopen.FileOpen.class i make it as a jar and put it in jre\ext folder at the client machine.
    ------------------------------------FileOpen.html(Tomcat)-----------------------------------------------------
    <html>
    <body >
    <applet code="OpenFile.class" archive="loadfile.jar" width="100" height="100">
    <param name="path" value="file://c:/open.html" />
    </applet>
    </body>
    </html>
    -------------OpenFile.java in server(Tomcat)--------------------------------------------
    public class OpenFile extends Applet implements ActionListener{
    String path = "";
    fileopen.FileOpen open = null;
    Button b = null;
    public void init(){
    path = getParameter("path");
    b = new Button("Open");
    b.addActionListener(this);
    add(b);
    public void actionPerformed(ActionEvent ae){
    try
    open = new fileopen.FileOpen(this,path);
    catch (Exception e){
    e.printStackTrace();
    -------------------------------------------FileOpen.java /Client JRE/ext----------------------------------------------------
    package fileopen;
    public class FileOpen
    AppletContext context = null;
    URL url = null;
    public FileOpen(Applet applet,String path)
    try
    if(null != applet){
    context = applet.getAppletContext();
    if (null != path)
    url = new URL(path);
    context.showDocument(url, "_blank");
    }catch(Exception ex)
    ex.printStackTrace();
    Please help to solve this issue very urgent.
    Thanks in advance.
    By,
    Saravanan.K.

    zzsara wrote:
    I want to open a new browser window and display the html file in local drive. ...Did you ever pause to consider how ridiculous that is?
    The best audience for applets is people off the internet. 'People off the internet' might be using a computer that has no (what was it?) 'open.html' in the root of the C: drive. In fact (shock horror) they may not even be running Windows, and would therefore probably have no 'C:' drive at all.
    If you do not intend to distribute this to people off the web, an application makes a lot more sense, but even then, you cannot rely on the document being there unless you 'put it there' (during installation, for instance).
    As the other poster intimated, applets can load documents off the local disk as long as they are trusted. Here is an example*, but note that it is not so rash as to presume any particular path or file, and instead leaves it to the user to choose the document to display.
    * The short code can be seen at SDNShare on the [Defensive Loading of Trusted Applets|http://sdnshare.sun.com/view.jsp?id=2315] post.
    On the other hand, a sandboxed applet can load any document coming from its own server via URL, or get showDocument(URL) to work. In that case, the JRE must recognize that the URL is from its own server, so the best way to form URLs for applet use is via the URL constructor
    new URL(getDocumentBase(), "path/to/open.html");That is how I form the URL in this [ sandboxed example of formatting source|http://pscode.org/fmt/sbx.html?url=/jh%2FHelpSetter.java&col=2&fnt=2&tab=2&ln=0]. Of course, in this case the applet loads the document, then parses the text to draw the formatted version, but the point is that an URL produced this way will work with showDocument(URL).
    I am pretty sure showDocument() in an applet off the internet will work with an URL pointing to a foreign (not its own) server, but it will not be able to load documents off the end user's local disks.
    I suggest a couple of things.
    - Try to express this problem in terms of what feature it is that you want to offer the end user. Your question jumps directly to a bad strategy for achieving ..who knows what? An example of a feature is "Shows the applet 'help' files on pressing F1".
    - A good way to indicate interest in a solution is to offer [Duke stars|http://wikis.sun.com/display/SunForums/Duke+Stars+Program+Overview] to match that interest.
    Edit 1:
    ..and please figure out how to use the CODE tags.
    Edited by: AndrewThompson64 on Sep 12, 2008 11:14 PM

  • Opening a new browser window in APEX

    Hi.
    I am trying to open a new browser window in APEX (v2.1) for a new Navigation Bar Entry.
    What I did is the following:
    1) Created the new Navigation Bar Entry
    2) On the properties of this entry I put the Target Type: "URL"
    and on the Target: javascript:window.open('f?p=&APP_ID.:63:&APP_SESSION.:::::' , 'Despre','scrollbars=1,resizable=1,width=400,height=600');
    when I click on my Navigation Bar Entry, the page 63 opens on the same window,NOT on a NEW browser window.
    Can you please help ?

    It seems that I found the answer.
    I had to do the following:
    javascript:(window.open('f?p=&APP_ID.:63:&APP_SESSION.:::::', 'Despre','Scrollbars=1,resizable=1,width=400,height=600')).focus();
    and then logout and login back in the application and it worked.

  • JavaScript for opening a new browser window.

    Hi all,
    Let me start by saying that I'm not JavaScript savvy at all.
    I have two buttons on a slide and I want each to open a new browser window.
    I Googled for a script and found this:
    window.open ('URL')
    I tried in my project and it worked fine but the browser window that my project was running in also changed.
    I've attached a .gif image of what happens to my project window when either of the two buttons is clicked.
    Can anyone help??

    You can check the home page setting:
    *Tools > Options > General > Startup: Home page
    *https://support.mozilla.org/kb/How+to+set+the+home+page
    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    *http://kb.mozillazine.org/Multiple_profile_files_created

  • How do I open a new browser window from Flash

    I wish to open a new browser window from Flash and when the new window closes to return to the location from whence I started.
    ThomasChen

    The command to open a new window would be the "_blank" part of a command to link to a web page in the code below.
    navigateToURL(new URLRequest("http://www.anothersite.com", "_blank"));
    As far as the new window closing and getting back to where you were in the original window, I don't understand where that original window might have gone to... You should be wherever you last left it.

  • Open a new browser window to show document

    Hi,
    I am trying to click an item in datagrid to open a new
    browser window and display the document for this selected item. how
    to implement it? thank you.

    Here is a full example that should do what you are asking.
    You need to create an itemRenderer for your DataGrid.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    backgroundAlpha="0" >
    <mx:Script>
    <![CDATA[
    import mx.collections.*;
    private var catalog:ArrayCollection;
    private static var contacts1:Array = [
    {URL: "
    http://www.macromedia.com/software/dreamweaver/",
    Product: "Dreamweaver"},
    {URL: "
    http://www.macromedia.com/software/flash/",
    Product: "Flash"},
    {URL: "
    http://www.macromedia.com/software/coldfusion/",
    Product: "ColdFusion"},
    {URL: "
    http://www.macromedia.com/software/flex/",
    Product: "Flex"},
    {URL: "
    http://www.macromedia.com/software/breeze/",
    Product: "Breeze"},
    {URL: "
    http://www.macromedia.com/software/director/",
    Product: "Director"}
    private function initCatalog(cat:Array):void
    catalog = new ArrayCollection(cat);
    myDatagrid.dataProvider = catalog;
    public function generateHtml(url:String):String {
    return '<a href="'+url+'"
    target="_blank">'+url+'</a>';
    ]]>
    </mx:Script>
    <mx:Text text="This example uses a Text itemRenderer for
    the second column that
    changes the font color of those cells and uses the htmlText
    property of Text
    to make the cell a link." width="350" />
    <mx:DataGrid id="myDatagrid" width="600" height="300"
    creationComplete="initCatalog(contacts1)" >
    <mx:columns>
    <mx:DataGridColumn dataField="Product" />
    <mx:DataGridColumn dataField="URL" width="400">
    <mx:itemRenderer>
    <mx:Component>
    <mx:Text color="0x0000FF"
    htmlText="{outerDocument.generateHtml(data.URL)}"/>
    </mx:Component>
    </mx:itemRenderer>
    </mx:DataGridColumn>
    </mx:columns>
    </mx:DataGrid>
    </mx:Application>
    Joan Lafferty
    Flex SDK QA

Maybe you are looking for

  • Purpose of Append Structure in DDIC(SE11)

    What is the purpose of Append Structure in DDIC(SE11)-Table?How to use this? Title by: Alvaro Tejada Galindo on Jan 23, 2008 6:11 PM

  • SSIS package give an error if execute through SQL server agent

    I have created a SSIS package in BIDS 2012. If i execute this package through sql server agent it gives the below error: Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 64-bit  C

  • Revenue a/c

    HI, when we create billing accounting document gets generated for this we would have defined g/l accounts in VKOA setting but 1. how posting key gets determined debit or credit for g/l account (ie., say How modvat suspense/ manufacturing sales revenu

  • How does the profile downloader work?

    I tried downloading a profile. It says "installed" but the newly downloaded profile does not seem to be available to photoshop. Where and how are the downloaded profiles installed? I can't seem to find any documentation ... TNX rick

  • How to make Canon specific EXIF metadata visible in LR?

    Hi I love LR but it excludes some fields of EXIF metadata that are provided by Canon's propietary raw converter. I am sure that there must be a way to make these visible inside LR so one can filter and create smart collections based on these metadata