ADS call Error

Hi All,
When i am calling the interactive form in portal i am gettign the error as 'ADS Call failed'.
the error is pertaining only to me, if some other user logins then he could able to view that application.
How to solve this error pertaining only to me.
Please guide me to solve this issue.
Your help will be appreciated.
Thanks
Ram M

check with the basis team whether ur user has all relevant roles.
Thanks and Regards
shanto aloor

Similar Messages

The ADS call has failed - Error

Dear all
I have created one web dynpr application with interactive forms followed by saptechical.com, If i run the web dynpr application, it thrown an error
"WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server"
I have checked standard prog. (FP_PDF_TEST_00) for checking ads connection, thats working fine. It shows a forms.
But if i run my custome web dynpro application, it shows error.
Please give a solution.

Hello,
please also check:
FP_TEST_00
and
FP_TEST_IA_01
these also have to work in order to render interactive PDF inside a Webdynpro ABAP application.
I assume:
1. You do not have proper destination service configuration. (described in note: #915399)
or:
2. The credential is not properly installed into your ADS.
Please ensure the credential is installed, the expiry date is visible and the J2EE engine was restarted after the credential has been installed.
Best regards,
Dezso

WebDynpro Exception: ADS call failed SOAP Framework error:

Hi,
Can help me with this error:
WebDynpro Exception: ADS call failed SOAP Framework error: SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /Transaction system failure in method rpData./<ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1="http://sap-j2ee-engine/client-runtime-error">Transaction(100.102).
Thank you

ADS Installation and configuration:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Troubleshooting for ADS configuration:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?quicklink=index&overridelayout=true
Landscape with ADS:
http://csc-studentweb.lr.edu/swp/Berg/Conferences/SAP_NW2008_and_Admin_2008/BI/Track13/Track13_Session4.pdf
ADS tests
http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm
Hope that helps, Otto

Error:ads call failed

hi al,
right now i am workin on webdynpro abap interactive forms. i am new to this topic and followed steps as like in sap technical.com . i am using zci layout for layout type. i got following error when processing.pls help me out of this error.thanks in advance
The following error text was processed in the system RET : WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server
The error occurred on the application server sapretail_RET_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF_XSD of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
regards
vinoth

hi thomas,
Thanks for ur reply.but seen that component WDR_TEST_ADOBE, i have did every thing now getting error
The following error text was processed in the system ID2 : WebDynpro Exception:
The error occurred on the application server TCSID2_ID2_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF_XSD of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
PLS HELP ME OUT.
regards,
vinoth.
Edited by: SAP_TECHY04 on Jul 22, 2009 9:09 AM

WebDynpro Exception: The ADS call has failed. You can find information abo

hi,
I have created the From .
when i try to run the application .i am getting the folllowing error .
Is there any solution for that?
WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server.
Regards
Vivekananthan.S

It sounds like your system is not properly configured for the connection to the Adobe Document Services. Have your system admins confirm the setup. Look for the error.pdf document mentioned in the exception for more details on the actual cause of the error. This error message is generic and could be caused by several different conditions - almost all of which are related to incomplete or incorrect configuration of the ADS/ADS Connectivity.

The ADS call has failed-ADOBE form

Hello All,
I am getting the following error, while runing WD, i am displaying pdf form in that.
but for few of the pdf forms i can display properly with out any error. in the same WD, but in other view
this error is coming only with one form.
the exception is .....
WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server
The error occurred on the application server pep74_S92_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP

Have you managed to establish what is different about the forms that do/do not display? Main one is the interactive flag. If it is just your interactive forms that produce the dump then it is likely that the credential file has not been installed correctly (or at all).

ADS Configuration Issue : ADS Call Failed

Hi All,
We are trying to implement the ADS Configuration Newly in our Development Portal 7.0.
We have done all the configuration steps as per the standard ADS configuration Document.
When we try to execute the Connection Test HTTP Destination ADS RFC Connection test in backend we are getting 302 Found return code in R3.
We also tried trouble shoot as per the NOTE 944221... The follwoing test results are as follwos :
=> FP_PDF_TEST_00 By selecting the ADS connection the result is succesfull. - OK
=> FP_TEST_00 By selecting ADS Connection and tried to execute we got error - ERROR
     Error : ADS: com.adobe.ProcessingException: com.adobe.Processing(200101)
=> FP_CHECK_DESTINATION_SERVICE by selecting the ADS connecting and executed,
      without destination it is success - OK
      and with destination it is failing - ERROR
     Error : SYSTEM ERROR : com.adobe.ProcessingException: com.adobe.ProcessingException: Problem accessing the data from Destination: dest:FP_ICF_DATA_X45//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-lang..
=> FP_TEST_IA_01 is also failing - ERROR
     Error : ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: Problem accessing the data from Destination: dest:FP_ICF_DATA_X45//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-lang..
IN Portal we are trying to execute any of the PDF rendering iView from ESS, we are getting the following error message.
Error While Processing your Request :
The call to URL has been terminated due to an error.
http://<HostName>:<Port>/sap/bc/webdynpro/sap/asr_process_execuet/
The Follwoing text was processed in System X45: WebDynpro Exception : ADS Call Failed ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: Problem accessing the data from Destination: dest:FP_ICF_DATA_X45//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-lang..
Could any one suggest something to work out on this issue.
Thanks In Advance.
Visweswar

Hi Visveswara,
I'm also getting the same kind of error on production system. The application is working fine in DEV & QAS.
Pl share your inputs if you have any light on this.
Regards,
Indu.

The ADS call has failed.

Hi,
I created WD4A application using interactive form..
i placed ui element interactive form and run the application...dat time its giving output as non-interactive.
it is a interactive form usage, that's y, the property "enabled" is selected in the property table of interative ui element
wen i execute my application, i mgetting below error
*WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server *
if i unchek, it works fine...
here i checked with standard applications also, if it is non-interactive its givinf proper out put
if it is interactive, its giving same above error.
how to reolve tihs issue
regards
Venkat
Edited by: venkat on Nov 10, 2008 3:37 PM

Probably this is becuase of ADOBE LIFE CYCLE DESIGNER is not installed, you can go to transactin
SFP & enter this form as test
DEMO_CHANGE_EMPLOYEE
Once you are in form builder click on layout, if you will get some error msg then it means ALCD is not installed. Then you need to install ALCD.
Thanks,

ADS call cant be completed

Hi,
I have integrated an Adobe Form with my Web Dynpro App.
But when i am testing the application, It is giving me a dump "ADS CALL CANT BE COMPLETED"
I went to FP_PDF_TEST_00 and it is displaying the Version Number of the ADS.
Adobe Lifecycle Designer is also installed on the system.
What should be the problem ?
Thanks
Shivi

Hi ,
Its prob with system configuration.
I too faced the same issue . i raised a CSS message for it.
The system got configured.
You can refer here the reply which i got after configuration.
Hi,
I am using interactive form in my Web Dynpro Application.When I test the
application I am getting an error as " The ADS call has failed. You can
find information about the cause in the error.pdf on the application
server".Please find the same in attached screen shot.
Current development is on hold due to this issue.please do the needfull
ASAP.
Regards,
Murthy
    Internal Memo
    15.09.2009 16:53:41      Uday Muppiri
Hi Colleagues,
Problem may be with the entry of destination service in visual admin of
IAD.
Visual Admin > Security Provider >Policy config >com.ADS.jar >Security
Roles >
Add ADSUSER, ADS_ILV and J2EE_ADMIN in User mapping field.
Please see the SAP note # 944221 for reference.
Same type of issue was solved in old CSS # 3276632 2009.
Thanks & Regards,
Uday
PM Infrastructure.
    Internal Memo
    15.09.2009 18:22:16      Prashanth VL
Hello ,
We have checked the FP_TEST_00 report and its working in other
DEV systems but in ILV its asking USR/PASSWORD.
Regards
Prashanth VL
GOSC BSS
    Internal Memo
    15.09.2009 18:55:11      Prashanth VL
Hello Colleagues,
ADS on IAD system is working ok.
We have checked the ADS in IXT and IFD system where ADS is configured
for IAD system.All tests are ok.
1. Test program FP_TEST_00
Its giving the PDF page in print preview
2. Test program FP_PDF_TEST_00, RFC connection to ADS
Giveing the verssion of the ADS
So its seems to be problem in ILV configuration.
Can you please check the ILV to ADS configuration.
Regards
Prashanth VL
GOSC BSS
    Internal Memo
    15.09.2009 19:46:44      Uday Muppiri
Hi Rodrigo,
The ADS RFC in ILV is working fine in ILV.
But when the report FP_CHECK_DESTINATION_SERVICE is executed in Se38
ssytems requests for Username and Password.
Would you please assist here?
Thanks & Regards,
Uday
PM Infrastructure.
    Internal Memo
    15.09.2009 20:47:19      Uday Muppiri
Hi Colleagues,
Since Rodirgo is on vacation I found this is the suitable component.
Would you please assist here?
Thanks & Regards,
Uday
PM Infrastructure.
    Internal Memo
    28.09.2009 20:37:50      Rodrigo de la Pena
HI
The certificate was renew on the ILV tx STRUST and after this has to be
this new certificate in the IAD java part, so the ADS trust the ILV
I did that and now is working fine
Regards
Rodrigo
This was the issue.Raise CSS for this.
Priya

Cannot turn on iphone cellular calls error

When trying to activate iPhone Cellular Calls, I get the error "cannot turn on iphone cellular calls error, FaceTime and iCloud must be signed in to the same Apple ID to use iPhone cellular calls" I am signed onto the same accounts in both places and cannot figure out what is wrong. Any help would be appreciated! Thank you

If you're trying to make calls from a mac, then you should make sure to enable FaceTime calls from your AppleID (email address) on both the mac and the iPhone. Don't uncheck your phone number, either. FaceTIme should be enabled on both devices with both your phone number and your AppleID.
For some reason, this is what had to be done for me to be able to make phone calls from my mac without receiving this message on my iPhone. I know it isn't ideal because we shouldn't have to enable FaceTime calls via AppleID, especially if we won't be using it with our AppleID, but this is what worked for me. Once you enable FaceTime calling from your AppleID on both the iPhone and your mac (while also keeping the calling enabled via your phone number), then try to turn on iPhone cellular calling on your iPhone. It should work, and then you can try to make a cellular call on your mac.
Some people may think that this isn't a fix because they might think I am talking about FaceTime audio calls. But I'm not. Try this and report back if you can.

Smartform Printing : Error in spool C call: Error from TemSe

Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device    ZEB10
Format           ZTT               Format
Doc. Category    SMART
Recipient
Department
Deleted On       19.01.2011
Authorization
Output Attributes
No. of Copies   1
Priority              5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested           0
Processed           0   With Problem                             0
                        With Error (Not Printed)                 0
Storage Mode Print
TemSe Attributes
Object name           SPOOL0000013836
Data type             ????????????
Character set         0 -
> Character set of dev type = 1162
Number of parts       0
Record format
Size in bytes         0
Storage location
On seeing SP01
      Spool no.              Type                 Date        Time   Status   Pages               Title
       13836      Smartforms(OTF) 11.01.2011 07:32       +          0      SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
Manas

Hi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K

Internal error - NUMBER_GET_NEXT call error while craeating new company address

Dear Team,
In solution manager while we going to create company address through tcode SUCOMP and during saving the record error message occur as "Internal error -NUMBER_GET_NEXT call error".
Please suggest for solution
Regards,
Ajay

Dear Mr. Rafikul,
There is no ABAP dump but in SM21 there are error message:-
"Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message E0 022
EDI: Error process code '&' is not available
&CAUSE&
A syntax error was identified while processing an inbound
<DS:GlOS.IDoc>IDoc. There is no entry with the key &v1& in 'Error
process codes'. However, this process code was determined from the
table of status values (TEDS1).
&WHAT_TO_DO&
Please check the 'Error process codes'.
IF &DEVICE&='SCREEN'
<DS:TRAN.WE40>Execute function
ENDIF
One document format shows more"
Now my one of problem solved. When i have go to SU01 and checked in address tab, its work now. Earlier its was not work.May be executed the report Z_OSSNOTE_445575 in system, its should be working. Thanks for your answer.
But till m facing in SUCOMP for creating company address.
Regards,
Ajay Asawa

Ecatt script fails due "Error in OLE API method Call" error

Hi ,
Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
Please help in solving this issue.
Thanks,
Asha

>
Asha Nagaraj wrote:
> Hi ,
>
> Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
>
> We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
>
> Please help in solving this issue.
>
> Thanks,
> Asha
Hi Asha,
Are those components are connected and the necessay settings has been done?
Regards,
SSN.

*ERROR IN OLE CALL - METHOD CALL ERROR...*

HI ..
When trying to Upload a file using BDC with Vista OS, we are getting the following error..
ERROR IN OLE CALL - METHOD CALL ERROR...
There is no problem with BDC as its working fine with XP & other OS.
Pls help!!

Seems that you are working with microsoft files.
Maybe you are using deprecated functions like WS_EXCEL

Calling error/application logs in CRM inbound proxy

Hi All,
In inbound proxy of CRM, I have to call Error/Application logs (for eg:SLG1) whenever an integration process throws some error. Has anyone worked on this kind of scenario to call different application logs in CRM or R3 side inbound proxy.
If so, please give some ideas on this.
Thanks
Deno

Hi Deno,
did you have a look at my blog in which I describe it ?
/people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
Regards,
michal

ADS call Error

Similar Messages

Maybe you are looking for