ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)

Hi Everyone,
I  have seen alot of post's regarding this issue. But none of them seem to be the same scenario what i have. So here it goes again.
We have 2 systems SAPDCD and SAPDCL. SAPDCL is a copy of SAPDCD system.
I have developed a Adobe form in SAPDCL system. And give me and error when I execute the form directly and try to print it. It gives me the error only when add something in the context. If i dont have anything in the context of the form, it print fine without the error.
I developed the same form in SAPDCD system with same context in the form its prints fine.
I see the ADS connetion in SAPDCL has target host system as SAPDCD as it was copied from SAPDCD system. But all ADS connections work fine. I was told that we can have differents sytem pointing to one ADS server.
I couldn't find anything in the trace file aswell.
Would greatly appreciate your suggestions/solutions.
Thanks,
shalu

Hi Shalu,
Check your destinations on ABAP stack at SM59 --> HTTP Connection --> ADS and in your Visual Admin where ADS is installed check your destination is pointing to the right system. If you are not Basis person then take help of your Basis Admin.
Regards,
Srinivas Repala

Similar Messages

  • Error "ADS: com.adobe.ProcessingException: X Exception - P(200101)"

    Hi folks,
    I created a new Adobe Interactive Form which is quite simple. There's just a header and the personal number of an employee to be printed. I binded a structure (contains 10 fields) to the context and de-activated all of the fields except  the field personel_number (defined as CHAR8).
    The form is ok when it's execuded by TA SFP.
    Running the form via a print program it aborts with "ADS: com.adobe.ProcessingException: X Exception - P(200101)".
    When I deactivate the personel_number in the context the form the error does not occur.
    The ADS works well. FP_CHK_REPORT and FP_PDF_TEST_00 report no problems.
    My problem is quite similar to [ADS: com.adobe.ProcessingException: com.adobe.Processin(200101); just the other way round.
    Regards,
    Steffen

    I fixed the problem on my own. There were probably 2 bugs:
    1. I deleted the form, the interface and the ddic objects. Then I started from scratch that means creating again ddic objects and the interface. When I created the form I recognized the layout type "standard form". I'm quite sure that this option was not selectable on form I deleted.
    2. It also could have been that the data structure of the context contained wrong data e.g. a numeric field contained non-numeric stuff (X'00')
    Maybe these informations are helpful for somebody.
    Regards,
    Steffen

  • Error ADS: com.adobe.ProcessingException:Could not retrieve(200101)getting

    Hi,
    In our development system CD2(ECC backend system) when I am acessing t-code PHAP_CATALOG_PA->Category Group/Category/Template>Zero Harm>DRA JKSW2>Preview --->Print Layout giving below error.Here PD7( Dev portal ) is acting as frontend.
    Error :
    ADS: com.adobe.ProcessingException: Could not retrieve(200101)
    Message no. FPRUNX001
    Diagnosis
    An error occurred when Adobe Document Services (ADS) was launched.
    System Response
    Error message
    Procedure
    When troubleshooting, follow the steps described in SAP Note 944221.
    First check the connection to ADS. You can use the program FP_PDF_TEST_00 to do this. From SAP NetWeaver Release 7.0, the program FP_CHECK_DESTINATION_SERVICE must also run successfully (both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.
    Please help in this case.
    Regards
    Nilesh

    Hi,
    Perform the ADS configuration check as specified in : http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f0638873b56bede10000000a11466f/frameset.htm
    You need to check all the configuration steps to makesure everything is setup right. Also, try after restarting your Java engine where ADS is installed. Check your ADS RFC connection using SM59 tcode, and check whether ADSUSER and ADS_AGENT are not locked.
    Try and let know.
    Regards,
    Shahid.

  • ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)

    Hi,
    Exception       SYSTEM_ERROR
    Message ID:          FPRUNX                     Message number:           001
    Message:
    ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)
    I am getting the above error while executing adobe forms function module.
    Any ideas.
    Regards,
    Thiyagu

    the J2EE User Management Engine has a configuration for setting an expiry date for passwords. Because of this setting, you can get an error after the password expires. (see documentation at http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/16c43bdd3da244a1d3372a77b5f83f/frameset.htm) This could be a reason here.
    Try this:
    Check the user ADSUser in the Visual Admin: -> Server -> Service -> Security provider -> UserManagement tab
    -> ADSUser
    Enter a password again and check 'No password change is required'.

  • ADS-error: com.adobe.ProcessingException: Problem accessing d (200101)

    Hi Experts,
    On the ADS have been tested for 944221 without a note of paragraph 6 "Generated PDF with additional information". ADS is working locally.
    But on the another server occurs errors
    "ADS-error: com.adobe.ProcessingException: Problem accessing d (200101)"
    when printing on ADS server.
    On another server have been tests
    FP_TEST_00 - ok
    FP_PDF_TEST_00 - ok
    FP_CHECK_HTTP_DATA_TRANSFER with ADS -  false
    FP_CHECK_DESTINATION_SERVICE with ADS - ok
    FP_TEST_IA_01 - ok
    Edited by: Aidar Samigullin on Jul 27, 2010 1:47 PM

    http://www.google.com/search?q=ADS-error%3Acom.adobe.ProcessingException%3AProblemaccessingd+(200101&sourceid=ie7&rls=com.microsoft:cs:IE-SearchBox&ie=&oe=&redir_esc=&ei=sspOTP6lC4usOKnIjNIC

  • ADS: com.adobe.ProcessingException:XMLFM Exception - T(200101)

    Hi ,
    we have two IDES.one is ECC5 & the other is ECC6.Again they access a
    common Java Instance for ADS.We have configure the ADS as per the
    standard documentation by SAP. ADS on ECC5 is working fine. But on ECC
    6 system, when we see the print preview for report FP_TEST_00 we get
    following error--
    Exception SYSTEM_ERROR
    Message ID: FPRUNX
    Message number : 001
    Message : ADS: com.adobe.ProcessingException:XMLFM Exception - T
    (200101)
    any usefull hints to solve this problem..thanks in advance

    1)when i execute FP_PDF_TEST_00 at se38 its run fine and shows that
    222bytes transferred
    2)when i execute FP_CHECK_DESTINATION_SERVICE AT SE38 without clicking the destination service connection-ADS  it works fine.But when i execute FP_CHECK_DESTINATION_SERVICE AT SE38  clicking the destination service connection-ADS  its shows the following error
    SYSTEM ERROR:com.adobe.ProcessException:Parser Configuration error while extracting properties from form template
    3)Again in search of the defaulttrace.trc i went to usr/sap/<SID>/<INSTANCE>/j2ee/cluster/server0/log/
    folder but i find so many defaulttrace.trc files.Like defaulttrace 1.trc, defaulttrace 11.trc,defaulttrace 13.trc etc.Could you plz tell me which .trc file i have to check & what to check???

  • Error: com.adobe.ProcessingException: Problem accessing d(200101)

    When I run the transaction ooam to generate a PDF document i got the following error:
    com.adobe.ProcessingException: Problem accessing d(200101)
    Someone could help me?
    Tks.
    Erik Brison

    Hi Andreas,
    Firstly thanks for your help!
    I checked the note 944221 and solved some problems, but when i tried to run the transaction again, i got the following error:
    ADS: com.adobe.ProcessingException: Could not retrieve(200101)
    Do you have any other ideia?
    Erik Brison

  • ADS: com.adobe.ProcessingException: Problem accessing d(200101)

    Dear Expert,
    Please resolve my Problem....
    I Have made one Form, while testing I am getting Given Above Error, Whereas i have tested So many Standard Adobe Form and z adobe form but They are not giving any error, Please tell me where should i check For the error which is occuring only For my this adobe Form.
    Regards
    Shelly Malik

    Hi Shelly,
    Can you please share the solution for this issue??

  • ADS: com.adobe.ProcessingException: Problem accessing d(200101)...different

    Hello
    I searched and read a lot about this error and try to fix this but finally I got into unique situation....its like,
    various test for ADS works fine... like FP_TEST_00 , FP_PDF_TEST_00, destination test etc.. all works fine but when I create my own form and try to run this... I get this error. Even I just copied FP_TEST_00 into ZFP_TEST_00, just to make sure I'm not doing anything wrong in form development, it still give me this error.
    I dont know what should I do.. I dont have access to ADS settings..
    Anyone if have any idea how I can proceed to solve this, that will be greatly appreciated.
    Regards

    Hello Ajay,
    1. I guess you activated all three Interface, Form and program...
    2. I guess you checked FP_TEST_00 with tcode SA38...
    3. I guess you called your basis team to check if everything is O.K with the J2EE Server
    4. I guess you checked ADS is defined in T-CODE SM59 ...(Under HTTP Connections to External Server... ADS)
    Ajay,
    If one or more guesses is wrong then you have to check it...
    If the J2EE Server is down then you wont be able to activate your FORM .
    I hope this helps
    and if not... Sorry... i don't know how to help you on this one...
    Eran

  • Error Info... FPRUNX 001: ADS: com.adobe.ProcessingException:

    Anyone every run into this error after saving a PO?
    Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    The full message is:
    System ID....   PR3
    Client.......   100
    User.........  ELBURGD
    Transaction..   ME21N
    Update key...   4EC42600E07900E1E10080000A14402B
    Generated....   17.11.2011, 06:09:20
    Completed....   17.11.2011, 06:09:24
    Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    Using SM13 it says:
    Function Module:  RV_MESSAGE_UPDATE
    Status:                  Update was Terminated
    Class:                   FPRUNX      Number: 001
    FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    This happens seemingly randomly in production after the user saves a PO.  They'll create a PO, save it, get the PO number , start a new PO and a message box pops up saying: 
    Express document 'Update was terminated' received from author 'xxxx xxxxx'
    If the user goes back to the PO to look it up, the PO does not exist.  If the user creates a new PO (or recreates the one that failed to commit to the database), it'll save with no trouble... same print settings, same everything.  This leads me to believe the problem isn't with the PO form but with the ADS.  The PO form is custom and works without error in dev and QA.  I do believe the users are setting the message options to Print Immediately.
    I am unable to recreate the problem in dev or QA, and it appears randomly in production.  I've run the ADS test programs in production and they come back without errors.
    Has anyone run into this before?  Are there some settings on the ADS that might need to be adjusted?  I don't think this is form related since we're able to recreate the same PO and save without error immediately afterwards, but could this be a form problem?
    I am open to any and all experiences you've encounted, and any suggestions you may have.
    Jeff Kulbeth

    Recently I had the same error with Adobe Form. In my case there were a few problems regarding data binding and data format. In a Form there was unresolved data binding warning and data format mismatch with one field - Form interface contained variable of type decimal and in the Form content that variable was bound to the field of type numeric with data format integer. Adobe Form with such kind of issues can be activated without errors but during Form call you get error FPRUNX001
    So my advice would be to consider things like:
    Resolve data binding warnings. Its in the Report palette witch by default is located in the bottom left corner of the vertical palettes bar.
    Check that Form interface data types match with Form content fields data formats in data binding sub-menu.
    Also in your Form calling application you can trace ADS by using these function modules:
    FP_GET_LAST_ADS_ERRSTR - provides texts about the cause of the error
    FP_GET_LAST_ADS_TRACE - provides a trace of the Adobe document services

  • System Error:ADS :com.adobe processingException:XMLFM Exception during render Exception

    Dear All, We have configured ADS in DEV and QAS it is working fine. We have done the same configuration in PRD but it is giving the following error when we execute the program FP_CHECK_DESTINATION_SERVICE: SYSTEM ERROR: ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE(200,101). Exception of class CX_FP_RUNTIME_INTERNAL System Info : SAP ECC EHP6 SAP NW 7.31 Kindly suggest some solution. Regards, Mustafa

    HI
    Note 944221 - Troubleshooting if problems occur in forms processing
    Note 717568 - FPRUNX001, 002 or 004 with output of PDF-based forms
    Note "959462 - ISR/Adobe/Web Dynpro Java: Configuration problems"
    Note 1288500 - HR-RU: ADS: XMLFM Exception-P(200101) message no.FPRUNX001
    Note 1143442 - Shift report: Error "ADS: XMLFM Exception"
    AND YOU CAN CHACK AGAINST FOLLOWING Problem:
    1). Check the JCO RFC from Java to ABAP server.
    2). Check the ADS connection in SM59.
    Check the document more troubleshooting steps
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?QuickLink=index&overridelayout=true
    http://forums.sdn.sap.com/thread.jspa?threadID=842415

  • SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from De

    Hi SAP Guru,
    We have configured ADOBE for separate ABAP server and Java Server.
    But when I am execution report FP_TEST_00 getting below error
    ADS: com.adobe.ProcessingException: Problem accessing d(200101) Message no. FPRUNX001
    FP_CHECK_DESTINATION_SERVICE
    FP_CHECK_HTTP_DATA_TRANSFER giving error
    SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from Destination dest :FP_ICF_DATA_IP1//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
    But report fp_pdf_test_00 is giving postive response.
    I have troubles hooted according to note 944221 , my configuration is ok but no success.
    Please help to resolve this issue.

    Hi,
    Check your ADS Connection .
    Do one thing
    Go to T-code "SM59"  -  "RFC Destinations (Display/Maintain)"
    select "HTTP Connections to External Server" - > ADS
    Double click there and check the all the settings " Administrations "  ,  Technical setting , Logon and security , Special option .
    Please check the log on and pass word with the help of your SAP BASIS consultant it will work fine .

  • Com.adobe.ProcessingException: Requested update ZCI-003 could not be found.

    Hi
    Please assist with the following ADS call error as per webdynpro application dump for an adobe interactive form.
    The dump happens on drop downs and buttons on the form. The ADS is on Netweaver 7.01 EHP1. The layout on the form is ZCI but the script has not been manually inserted. The form works perfectly on the Development and QA environments but dumps in production with the error below. 
    WebDynpro Exception: ADS call failed ADS: com.adobe.ProcessingException:
    com.adobe.ProcessingException: Requested update ZCI-003 could not be
    found.(200,101).
    Kind Regards,
    Michael Mayisana.

    Hi Michael,
    Seems the ADS is working fine for non-interactive forms but the problem persists for interactive forms only.
    As per my understanding a separate license or credential file for Interactive forms is required to be configured at ADS level by your basis team.
    Check report: FP_TEST_00 and FP_TEST_IA_01.
    Report FP_TEST_IA_01 should be working fine if you want to run ADS to generate interactive forms.
    Please check with your basis team if credential is the issue.
    Regards,
    Vaibhav

  • ADS: com.adobe.ProcessingException: Unable to load or c(200101)

    Hi,
    We configured ADS and it was working fine.
    Now it is giving me an error "ADS: com.adobe.ProcessingException: Unable to load or c(200101) "
    when i execute FP_TEST_00 program where as it is giving me the version info when i execute FP_PDF_TEST_00.
    All the settings are in place but it is giving me this error and am unable to get any solution for this.
    Please guide me with a solution.
    With Regards,
    Pradeep.B

    Dear Nelis,
    We saw the ADS trace file and we found that Operation properties file was missing.
    As we have moved to the new server, we copied the properties finle in the new server and the problem is solved.
    Thanks for your valuable suggestions.
    With Regards,
    Pradeep.B

  • ADS: com.adobe.ProcessingException: XMLFM Exception  in ABAP Webdynpro

    Hi All,
         When I test the ABAP Webdynpro with Adobe form embeded in it. I get very unreliable results.  When trying to bring up the forms, sometimes, it comes up the 2nd attempt, sometimes after several attempts.
    And the error message is :
    ADS: com.adobe.ProcessingException: XMLFM Exception - PDF render operation exception, reason code: 20484 : Font Helvetica_Normal_Normal could not be found(200,101)
    I have checked several notes: 944221, 717568 etc........but no use.
    I also have checked the test programes in SA38, user account, sicf services and destinations. It seems everything is ok except the program FP_CHECK_DESTINATION_SERVICE in SA38. The test result is the same as the unreliable result of the ABAP webdynpro app.
    Any usefull hints to solve this problem..thanks in advance

    Hello,
    the message tells you about one (of possible many) problem. You must maintain your fonts to fix the message. Or there is a single option (I use this when I am in a hurry and don´t have access to the customers basis) - change the fonts: Use for example Myriad Pro, that always worked for me.
    Use this help: http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
    or wander around for other useful hints and tips.
    Regards, Otto

Maybe you are looking for