ADS Config error

Folks,
We are trying to Configure ADS on SP14 and when we try to Configure the credentials( PK12) , and /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices /TrustManagerService/trust/credentials directory is missing. We are only able to see /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/lib this directory.
Thanks
Manish

Hello Manish,
Your ADS Installation might not be correct.
You can try creating the mentioned directory structure and try if it works.
Regards,
Shubham

Similar Messages

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1. I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem. Strangely enough PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

Acrobat X Pro Config Error 130:11

Hello,
I've now un-installed & re-installed Acrobat X Pro a couple of times in order to get over the issue of Config Error 130:11 - which causes the application to quit (see link to original thread below).
However, I cannot afford to do this continuously - where do I go from here?
Thanks,
Kieran
http://forums.adobe.com/thread/1013013?tstart=30

Hi there,
The workaround we have right now is to:
Launch any other CS6 product (such as Photoshop or InDesign)
It will pop-up trial screen at launch.
Click on License this software and restart subscription.
Launch Acrobat X after this. It should launch fine
Our engineering team is working on getting a permanent fix available for this issue.
I'm sorry for the inconvenience!
-David

Apple Outlook DAV Config error with Windows7; Any help?

I have updated Windows7 and I have downloaded the icloud control panel. I keep getting the Apple Outlook DAV Config error. Any help?

I encountered the same problem yesterday. I have not found a solution but take a look at this thread. https://discussions.apple.com/thread/3377753?start=0&tstart=0 The conclusion (at that time) was a conflict between iClound and reoccurring appointments in Outlook. The only solution: delete all of your reoccurring appointments in outlook (and stop using them going forward too?)........not very feasible for me.
Let me know if you find anything.

Config error, account determ, group missing for paid by company exp.type

Hi All,
When I am adding an Expense type to an Expense report,I am getting the following error message:
"Config error, account determ, group missing for paid by company exp.type"
I have maintained the configuration in Business configuration>Fine tune activity>Expense reporting-US.
I have maintained Expense Reimbursement Group as Z1(Customized) as well asExpense Account:- but not maintained offsetting Account For Paid Expenses.
Please find the screenshot.
Sincerely,
Rajitha

Dear All,
SAP development has created a software correction related to the issue.
Software correction is deployed in customer systems on 25th August,2014.
Sincerely,
Manasa Anantapur

Url-template-config Error Deploying app in WLS9.1

I am trying to deploy my application in WLS9.1 and using jdk1.5.0_08. I am getting url-template-config error. There is this file "url-template-config.xml"at
\weblogic91\server\lib\consoleapp\webapp\WEB-INF which is where this error arises and inside that file the schema definition is:
<url-template-config
xmlns="http://www.bea.com/servers/weblogic/url-template-config/8.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/servers/weblogic/url-template-config/8.0 url-template-config.xsd">
Why is weblogic 9.1 using a 8.0 defined template and is this the main problem? Please do help me out.
-Thanks

Hi
Did you get solution for url-template-config issue with weblogic 9.1 . Iam also getting the same error
15:23:22,531 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR URLTemplateDescriptor:152
- Exception while loading URL templates, /WEB-INF/url-template-config.xml
Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismat
ch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
Stack Trace:
javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected
"" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Please let me knwo
Thanks
Binu

Startup config error after upgrading to ASA from PIX

Hey guys. I get the following startup-config errors when reloading our ASA. A pix->asa conversion was just done on it. The ASA is currently running 8.2(5), and I am trying to get ready to update it to the most stable release, and wanted to make sure all my ducks are in a row. What is going on with the "will be identity translated for outbound"? This is part of the VPN configuration, and I understand nat0 is saying to not nat it. Is this something that I should be worried about? The ASA is not in production currently.
Let me know if you need further information
Thanks,
.........nat 0 10.37.0.116 will be identity translated for outbound
*** Output from config line 406, "nat (inside) 0 10.37.0.1..."
nat 0 xx.xx.xx.xx (PUBLIC IP) will be identity translated for outbound
*** Output from config line 431, "nat (inside) 0 xx.xx.xx..."
Line 406
nat (inside) 0 10.37.0.116 255.255.255.255
Line 431
nat (inside) 0 xx.xx.xx.xx (PUBLIC IP) 255.255.255.255
Corresponding global
nat (outside) 0 access-list outside_inbound_nat0_acl outside
nat (inside) 0 access-list inside_outbound_nat0_acl
ACL
access-list outside_inbound_nat0_acl extended permit ip 172.16.16.0 255.255.255.0 any
access-list inside_outbound_nat0_acl extended permit ip any 172.16.16.0 255.255.255.0
access-list inside_outbound_nat0_acl extended permit ip 10.37.0.0 255.255.0.0 172.16.16.0 255.255.255.0
access-list inside_outbound_nat0_acl extended permit ip 172.31.0.0 255.255.0.0 172.16.16.0 255.255.255.0

Hi,
I would imagine that there is no problem as the firewall has not given any kind of error message.
I do personally wonder sometimes why is it so (atleast in the 8.2 softares etc) that the firewall shows a message on the CLI when you are for example configuring a "global" / "nat" command pair.
I wonder if this falls into the same category.
The configuration format for NAT has stayed pretty same leading to the 8.2 softwares. I'm not totally sure what software you are going to go for but you seem to have the latest 8.2 series software so next steps are already 8.3 / 8.4 / 9.0 / 9.1
ALL of the above mentioned softwares introduce a completely new NAT configuration format to the ASA. While the ASA automatically converts the configurations its not always 100% process not to mention that the NAT configuration probably is far from optimal.
- Jouni

Help with Acrobat X Pro Config Error

Hello, I'm looking for some assistance with Config Error 130:11 on Acrobat X Pro running on Windows 7.
The message reads:
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
Error: 130:11
I'm using the subscription service for CS6.
Help appreciated!
Kieran

Hi Sandeep,
Thanks for your response.
Acrobat Reader had been installed on the machine, but not an earlier version of Acrobat - it's a new machine, but I installed CS5 Design Standard before subscribing to CS6.
Since my CS5 software was an upgrade (as was CS4 - I had been asked to re-enter the CS4 serial number), I think the Acrobat software was never fully installed prior to the CS6 download.
The permissions for SLStore were:
System & Administrator - Full Control
Creator Owner - Special
Users - Read & Execute
Users - Speical
The permissions for Adobe PCD & caps were:
Administrator - Full Control
Everyone - Read
When the Adobe PCD & caps folders were moved to the Desktop & the Acrobat X Pro re-launched, I received an Error: 6 response:
Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support... etc
I assume this is my next step?
Many thanks,
Kieran

AI Group Config Error 10001 using Virtual Channels

In my LabVIEW block diagram, I usually enter in numbers, e.g. 0,1,2 for the channel string input of AI Config. When I try to use a virtual channel, I simply type in the virtual channel, e.g. 0,K Thermocouple,2. However, this causes AI Group Config Error 10001, which applies to an invalid channel string. What is the correct way to enter a virtual channel into the channel string?

Do you have channels with virtual names of "0", and "2"?
If not you may be confusing MAX by using both naming conventions.
Try using only Virtual names.
I generally will use an array of strings where each element is the vitual channel name with no problems.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Indesign CC 2014 config error 5

Hi there, need help fixing an issue i'm having with indesign CC 2014 coming up with config error 5 when i try to open up the program (not a file). I have tried uninstalling and reinstalling several times, deleting preferences and even reverting back to Indesign CC. Same thing happens everytime. Any ideas?

Nevermind. I just saw the screenshot.
I don’t have my Mac open right now but on Windows here’s the folder you need to look at: C:\Program Files\Adobe\Adobe InDesign CC 2014\Scripts
Make sure that none of the CC extension scripts got moved there. If they did, move them back to the CC folder.

Parameter.config error

Hai,
iam getting the error parameter.config could not be located or read in apache webserver,forms and reports webserver when i start the applications.i was asked to do the following
update the value for the guest user end date to null
but i checked the value for end date column for guest user.it was already set to null.
what is the reason iam getting the same error paramter.config could not be located or read .wat else can i do to solve the error.
Iam a fresher.so help me to solve the error.iam analysing this issue for a long time but i couldnot get a proper solution.
Regards
orauser123

Hi;
>
update the value for the guest user end date to null
but i checked the value for end date column for guest user.it was already set to null.
what is the reason iam getting the same error paramter.config could not be located or read .wat else can i do to solve the error.Plz follow those notes and see its helpful:
Cannot Read Value From Field Parameter.Config Error When Starting/Stopping Apache Doc ID: 298143.1
adstrtall.sh is failing with error 'Cannot read value from field PARAMETER.CONFIG' Doc ID: 356434.1
Regards;
Helios

Port config error

Hello,
Our laptop is communicating with a Eurotherm 818 temperature control unit through the serial port. The program (Labview 7.1) uses VI's downloaded from the web, i.e. EI BYSINCH Read.vi and EI BYSINCH Write.vi, and obtains temperature and power measurements from the Eurotherm in real time. MAX says serial port is working properly. OS = Windows XP
PROBLEM: After around 2.5 hours (fairly consistently), the "Port 0 Config Error" occurs, and the program cannot be continued. I have determined that the error originates in the "Open Serial Driver.vi" which is a subvi in "Serial Port Init.vi", which in turn is a subvi in "Lab Serial Port Init.vi". (The first two vi's are Labview library files).
ATTEMPTS TO FIX: I have viewed a thread with a similar problem http://forums.ni.com/ni/board/message?board.id=170&message.id=76152&query.id=21947 for advice. I found the error handler and have tried creating loops to retry opening the driver, as well as closing it and then trying to open it again - with no success, i.e. Internal Error occurs. I have also been experimenting with the "force re-open" control in the "Open Serial Driver.vi", with no success as of yet.
Any ideas on solving this issue would be greatly appreciated.
Thanks very much,
Ian

Ian,
Sounds like your program is not structured the way I like to interface the serial port. There should be one call to serial init. After the serial port is open save the reference and use it to read and write the serial port. When the program is complete call serial close once. This will take care of the issue. I have serial devices that I talk to for months at a time. Yes, months using Windows XP.
Matt
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

AO Group COnfig Error

I have created a sine and a square waveform according to the user requirements but when i write the two waves to the AO generate waveforms i get an error saying AO config error. I have also configured the input channels using AI config and other input SUb vi's. I dont knwo what to do.

Vaidehi,
Are you using LabView 7.0 or newer (with DAQmx) or are you using an older version of LabView that only has the Traditional DAQ? Either way, there are several examples of analog waveform output included in LV. You can find them in the help menu under "Find Examples."
You coud get the AO config error for several different reasons. Its very hard to tell what it is without having the code. Are you doing simultaneous AI and AO? There is a shipping example for that also.
If you can't get this solved using the shipping examples please feel free to respond to this with your code attatched. It may give me some insight into whats going on.
-Sal

ADS config document

Hi
We have installed ADS on a 32 bit system with both java & abap.
Can anyone please send me the link for ADS config document.
Thanks.
MS

Hi..
check this link..service.sap.com>adobe>Interactive Forms based on Adobe software> media library>documentation--> ADS config guides..
Let me know is this helps you out..you need to have s-user id and password for this
Thanks
Gopal
(avoid points if this helps you out)

ADS configuration error - PDF form not displaying for Java WebDynpro

Hi Experts,
Sub : Problem with configuring Adobe Document Services
We have installed .. NW2004s SP12 on HP-UX OS.
As of now all the services are working fine, recently started configuring "Adobe Document Services", followed all the instructions given in the guide.
Environment :
=============
- Configuring ADS Webservice for "BASIC" Authentication, not for SSL
- Poratl (AS JAVA) and BI (AS ABAP) are running in different systems.
- Portal using UME as the data storage.
- OS is HP-UX
Configuration Check for Interactive Forms in Web Dynpro for Java
=================================================================
1. Checking the User and Password ---
http://<server>:<port>/AdobeDocumentServices/Config -- the system displays the version number of the Adobe document services in the response area.
2. Configured Webservice for Basic Authentication -- success
In the process of testing this configuration -- i've developed a Java Webdynpro interactive form and deployed into my DEV server (NW2004s Sp12).
Unfortunately, form is displaying in my sneak preview version (Nw2004s SP9), getting error when deployed into Dev server - NW2004s SP12 on HP-UX.
We haven't installed ADS separately, making use of ADS comes with the default installation.
Error :
=======
java.net.SocketTimeoutException: Reatimed out
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
I found that the following directory is empty in DEV server ... /usr/sap/EPL/JC03/j2ee/os_libs/adssap/XMLFormService, but not in sneak preview version.
Please do let me know to solve the problem.
Thanks

Thanks for quick response.
Installed Reader in my PC, i can view the deployed interactive form thru sneak preview, but getting the following error when running the same application thru my development server.
java.net.SocketTimeoutException: Reatimed out
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
I've installed Adobe Reader in the client PC not is the server system.
Thanks
Message was edited by:
Mohan krishna Mallepaddi

ADS Config error

Similar Messages

Maybe you are looking for