ADS Configuration on ECC5

Dears,.
We have installed ECC5 on Windows 2003 with SQL server.After installation with sapinst I also installed ADS with credential file.
Now when I am executing FP_TEST_00 to check ADS funtionality its not producing result so i am thinking that i have to do some post actions also after installing.
Please suggest me what are the post actions i have to perform for it.
Gyan

Prakash,
Check ADS configuration guide [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6] and check if you have completed the same at your end.
Chintan

Similar Messages

Error getting when doing ADS configuration

Hi ,
We have in our project the portal is working as frontend & ECC is working as a backend.
I have done with all the steps of ADS configuration ,when I checked the link
http://host:port/webdynpro/dispatcher/local/TutWD_OnlineInteractiveForm/OnlineInteractiveFormApp
but the error we are getting is "
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/TutWD_OnlineInteractiveForm' and application 'OnlineInteractiveFormApp' are not deployed on the server. Please check the used URL for typos."
Can anyone please suggest for solution.
Regards,
Nilesh

Hi,
Check the following notes will help..
0000717568
0000724804
0000736902
0000867502
0000894009
0000910649
0000944221
0000967432
0001004321
It looks a lot.. but ti takes only few minutes to check each note.. it helped to configure my ADS.
Cheers

ADS configuration problem

Hi guys,
I'm facing a problem with the configuration of the ADS.
First I had only ABAP AS, my BASIS man installed for me a JAVA AS beside the ABAP.
I didn't do any configuration for the ADS or any thing, I started with report FP_PDF_TEST_00 which gave me this error
ADS:SOAP Runtime Exception: CSoapException Transport :(100101)
Now I don't know really from where I should start my configuration, and bear in mind that I want to use only the Adobe Print Forms, I don't need interactive forms.
Reagrds,
Mahmoud

Hello ,
To start with ADS configuration , please check the
ADS configuration guide provided by SAP -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6
you can also take help from link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/1094a46a-ce44-2a10-e7bf-b934ab505b0a [original link is broken]
hope this helps.
Thanks,
Sahiba

Need ADS Configuration guide for 04s.

Hi All,
Does anybody have ADS configuration guide for Netweaver 04's?
I need it.
Could you send me the url for that?
Thanks in advance.

Hi shweta,
Go to <a href="http://service.sap.com/adobe">http://service.sap.com/adobe</a> -> Media Library -> Documentation. You will find the ADS configuration guide for Nw04s.
if u r not able to find..update with ur mail id..ill send that to u.
Regards,
Sharadha

ADS configuration and ADS programming

Hi Everyone:
Would you like to give me some hints to solve the following problems?
Two question here :
1. How to configurate a J2EE engine after you install ADS plugins? I have followed the guide of Scott Jones. <a href="/people/scott.jones/blog/2007/09/13/installing-and-configuring-sap-interactive-forms-by-adobe-for-the-sap-netweaver-composition-environment:///people/scott.jones/blog/2007/09/13/installing-and-configuring-sap-interactive-forms-by-adobe-for-the-sap-netweaver-composition-environment But when I run non-interaction form demo on my J2EE engine, the complier give error prompt :"http://ctud50055576a:50200/inspection.wsil/" can't be recogonized. in IE,I have checked the address of "http://ctud50055576a:50200/inspection.wsil/" , which is definitely the address of wsil. all of segements are correct.
2. where I can find the package of class WDPDFObjectFactory? I mean the according SDA in the client plugins package.
Thanks a lot, I'm almost exhausted by these two problems.

Thanks for SBS's credential file.
I have already add this license into my local J2ee engine.
But when running the demo <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#48">Dynamic Non-Interactive PDF Forms</a>, I still meet with such problem :
Caused by: com.sap.esi.esp.service.server.query.discovery.ExtendedServiceException: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (302) Found. The requested URL was:"http://ctud50055576a:50200/inspection.wsil, used user to connect: ADSUser"
     at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getEndpointConfigurations(DestinationsHelperImpl.java:933)
     at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getWSDLUrl(DestinationsHelperImpl.java:401)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.getWSDLUrl(GenericServiceFactory.java:222)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService_NewInstance(GenericServiceFactory.java:192)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:175)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:160)
     at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.invoke(PDFObjectDII.java:278)
     ... 68 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (302) Found. The requested URL was:"http://ctud50055576a:50200/inspection.wsil, used user to connect: ADSUser"
     at com.sap.esi.esp.service.server.query.discovery.WSTransportSettingsResolver.resolveEntity(WSTransportSettingsResolver.java:362)
     at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.initialize(WSQueryImpl.java:281)
     at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.findWSEndpoints(WSQueryImpl.java:165)
     at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getEndpointConfigurations(DestinationsHelperImpl.java:924)
     ... 74 more
It seems something related with Destination configuration.
Exactly following the guide of Setting Up Basic Authentication in a Java Environment of ""<a href="http://help.sap.com/saphelp_nwce10/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm">ADS configuration guide for SAP Netweaver 7.1 SP3</a>
In this document, in deployable Proxy class "DestinationSi", We need to add one logicport named after "Configport_Document".
And the WS endpoint is http://<host>:<port>/inspection.wsil
I suspect if such point is right or not, because the Web service of ADS web service address is different from such address, in WSnavigator, I find the according address is :
http://<host>:<port>//AdobeDocumentServices/Config?wsdl&style=document&mode=standard
So did a trial to use this Endpoint and filled in "DestinationSi" proxy class, but the server still refused to run the interactive form correctly, give error like this :
Caused by: com.sap.engine.services.webservices.espbase.query.exceptions.TechnicalException: Deserializing WSDL stream http://ctud50055576a.ctul.sap.corp:50200/AdobeDocumentServices/Config failed
     at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.getWSDLDefinitions(WSQueryImpl.java:509)
     at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.initialize(WSQueryImpl.java:310)
     at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.findWSEndpoints(WSQueryImpl.java:165)
     at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getEndpointConfigurations(DestinationsHelperImpl.java:924)
     ... 74 more
Caused by: com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException: Invalid Response Code: (404) Not Found. The request URL was:"http://ctud50055576a.ctul.sap.corp:50200/AdobeDocumentServices/Config, used user to connect: ADSUser". Check, whether the URL is correct, and the Web Service that you are requesting is up and running.
     at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:140)
     at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
     at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
     at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.getWSDLDefinitions(WSQueryImpl.java:507)
     ... 77 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found. The request URL was:"http://ctud50055576a.ctul.sap.corp:50200/AdobeDocumentServices/Config, used user to connect: ADSUser". Check, whether the URL is correct, and the Web Service that you are requesting is up and running.
     at com.sap.esi.esp.service.server.query.discovery.WSTransportSettingsResolver.resolveEntity(WSTransportSettingsResolver.java:362)
     at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:127)
     ... 80 more
Feel confused for such strange problem.
SBS, would you like to give me some hints for it?
Message was edited by:
        Orlando Ding

ADS Configuration Question

Hello All,
I am configuring the ADS in our ECC 6.0 system . I am facing two issues :
Issue 1:
I had completed all the steps for configuring ADS in the system. But when I run the Adobe form builder test from sfp transaction for the test form "FP_TEST_00" I am getting an error when executing the test function module for that test form saying :
"Exception SYSTEM_ERROR
Message ID: FPRUNX Message number:
Message:
ADS: com.adobe.ProcessingException: Problem accessing d(200101)
What might be the issue???? We configured the Basic authentication and not SSL.
Issue 2:
Our J2EE is pointing to the client 001 and 800 is the ABAP development client .
We had created a RFC destination by name "ADS" connection type "G" as part of the ADS configuration .
IN SM59 when I do a test connection on both clients ADS Rfc destination is working only in client 001 (J2ee client) and not working in 800 client In client 800 it's telling the error " SR000 : ICM_HTTP_CONNECTION_FAILED".
What might be the issue in 800 client?
Thanks for your help in advance.
Thanks,
Greetson

ISSUE 1:
If not, then check this thread and run the tests mentioned in it at your end.
Print Preview not working for Adobe forms
ISSUE 2:
Reason and Prerequisites
You are using ICM Release 6.40 or higher for HTTP connections of the SAP Web AS. In other words, your kernel release is 6.40 or higher.
Up to and including Release 7.00, ICM is only used in systems which also have an ABAP stack, and not in J2EE-only systems.
You may also be using the SAP Web Dispatcher.
Solution
The note describes the following:
Client and server roles of the ICM
List of the various ICM timeout parameters
Short description of the icm/conn_timeout parameter
Description of "Processing timeout" and "Keepalive timeout"
Configuration of the ICM parameters for the processing timeout and the keepalive timeout
Timeout parameters in the SAP Web Dispatcher
ICM kernel patches that affect timeouts
There is detailed ICM documentation in the SAP Knowledge Warehouse.
Client and server roles of the ICM
The ICM can forward incoming HTTP connections for further processing to the SAP Web Application Server; the ICM then serves as the HTTP server. The ICM can also forward outgoing HTTP connections from the SAP Web Application Server to other HTTP servers; the ICM then serves as the HTTP client.
Available parameters that control ICM timeouts
icm/conn_timeout
icm/keep_alive_timeout
icm/server_port_< n >
Parameter icm/conn_timeout
icm/conn_timeout is used to set the timeout when setting up the connection. If the timeout is exceeded, an error page is generally displayed with the information "404 Resource not found" "Partner not reached".
Therefore, exceeding the icm/conn_timeout does not lead to a "500 Connection timed out" error message.
Processing timeout and keepalive timeout
The icm/keep_alive_timeout and icm/server_port_< n > parameters define the keepalive timeout and the processing timeout.
ICM distinguishes between these two types of timeout.
The processing timeout is the timeout between the HTTP request being issued and the HTTP response being received.
If the ICM is used as a server for the relevant HTTP request (in other words, when it forwards an incoming request to the SAP Web Application Server), the processing timeout is the time that the ICM will wait until a response is received from the SAP Web Application Server (ABAP or J2EE). This interval may be exceeded with long-running applications in ABAP or the J2EE engine.
If the ICM serves as a client for the relevant HTTP request (that is, when it forwards outgoing requests from the SAP Web Application Server), the processing timeout is the time that the ICM waits until a response is received from the network. This interval may also be exceeded in the case of long-running applications in the network.
The keepalive timeout specifies how long the network should remain open after a request has been processed successfully so that the TCP/IP connection does not have to be reestablished if additional requests are received.
When you set the keepalive timeout, this does not normally lead to timeout errors. You should set the keepalive timeout high enough that the connection does not have to be reestablished for requests that are sent within a short time of each other, but low enough that the number of unused open TCP/IP connections is not unnecessarily high.
Configuration of the ICM parameters for the processing timeout and the keepalive timeout
For the ICM, the parameters mentioned here are in the instance profile.
The processing timeout is set for individual services with the following parameter:
icm/server_port_ < n > = ...,PROCTIMEOUT=< s >.
The keepalive timeout can be set globally for all services of the ICM with the parameter icm/keepalive_timeout.
You can also set it for individual services by using the following parameter:
icm/server_port_ < n > = ...,TIMEOUT=< s >.
If you set this parameter, it overwrites parameter icm/keepalive_timeout for the specified service.
Even if the ICM serves as client for a request, the TIMEOUT and PROCTIMEOUT parameters of icm/server_port_ < n > control the timeouts for the relevant protocol, provided that you have set TIMEOUT or PROCTIMEOUT.
If you have not set the PROCTIMEOUT parameter, TIMEOUT (or icm/keepalive_timeout) defines both the processing timeout and the keepalive timeout. Also, as of release 6.40, the keepalive timeout is limited to a maximum of 30 seconds.
In a system where the default timeout settings of 30 seconds for the keepalive timeout and the processing timeout are not sufficient because of long-running applications, we recommend that you set the TIMEOUT and PROCTIMEOUT parameters for the relevant services so that you can configure them independently of each other. In addition, we recommend that you do not set the TIMEOUT value higher than necessary, for example, to the usual default value of 30 seconds.
We recommend, for example, the following settings:
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600
to allow a maximum processing time of 10 minutes.
Timeout parameters in the SAP Web Dispatcher
The same timeout parameters are available for the SAP Web Dispatcher as for the ICM. You can change the parameters of the SAP Web Dispatcher in the profile file of the SAP Web Dispatcher (for example, sapwebdisp.pfl). We recommend that you set the same parameters in the SAP Web Dispatcher and ICM.
Known errors in ICM and Web Dispatcher timeout handling
Since 6.40 patch level 64, there have not been any known errors in ICM and Web Dispatcher timeout handling.
In Release 7.00, there are no known errors in ICM and Web Dispatcher Timeout Handling.
Known Internet Explorer errors in the keepalive timeout handling
Known errors in the keepalive handling from Internet Explorer are described in Note 900804. However, these errors are not usually displayed as timeout errors.
KEVIN
Edited by: Kevin Mike on Mar 14, 2008 11:44 AM

ADS Configuration Issue : ADS Call Failed

Hi All,
We are trying to implement the ADS Configuration Newly in our Development Portal 7.0.
We have done all the configuration steps as per the standard ADS configuration Document.
When we try to execute the Connection Test HTTP Destination ADS RFC Connection test in backend we are getting 302 Found return code in R3.
We also tried trouble shoot as per the NOTE 944221... The follwoing test results are as follwos :
=> FP_PDF_TEST_00 By selecting the ADS connection the result is succesfull. - OK
=> FP_TEST_00 By selecting ADS Connection and tried to execute we got error - ERROR
     Error : ADS: com.adobe.ProcessingException: com.adobe.Processing(200101)
=> FP_CHECK_DESTINATION_SERVICE by selecting the ADS connecting and executed,
      without destination it is success - OK
      and with destination it is failing - ERROR
     Error : SYSTEM ERROR : com.adobe.ProcessingException: com.adobe.ProcessingException: Problem accessing the data from Destination: dest:FP_ICF_DATA_X45//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-lang..
=> FP_TEST_IA_01 is also failing - ERROR
     Error : ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: Problem accessing the data from Destination: dest:FP_ICF_DATA_X45//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-lang..
IN Portal we are trying to execute any of the PDF rendering iView from ESS, we are getting the following error message.
Error While Processing your Request :
The call to URL has been terminated due to an error.
http://<HostName>:<Port>/sap/bc/webdynpro/sap/asr_process_execuet/
The Follwoing text was processed in System X45: WebDynpro Exception : ADS Call Failed ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: Problem accessing the data from Destination: dest:FP_ICF_DATA_X45//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-lang..
Could any one suggest something to work out on this issue.
Thanks In Advance.
Visweswar

Hi Visveswara,
I'm also getting the same kind of error on production system. The application is working fine in DEV & QAS.
Pl share your inputs if you have any light on this.
Regards,
Indu.

ADS configuration test fails

Hi,
I gone through the ADS configuration document for NW70 and all the settings are exactly same as described in the document but still I am getting the following errors during the check.
1. When I execute test program "FP_TEST_00" I am getting below error,
" ADS: com.adobe.ProcessingException: The rule specified,(200101) "
2. When I execute destination service check using "FP_CHECK_DESTINATION_SERVICE" I am getting error as
"SYSTEM Error: com.adobe.ProcessingException: The rule specified, requires Output PDF named: Nodes, does not exist."
All other tests and configurations are working fine as mentioned in the configuration guide.
Please help me on this issue.
Regards,
Nallasivam.D

Hi
I am also facing the same issue, can you let me know what was the problem ?
Did you happen to resolve the issue ?
Appreciate your inputs.
Thanks
Sri

ADS configuration in iSeries

Hello Exports,
Greetings for the day,
We are in the process of configuration of ADS in iSeries platform. Can you please guide us the configuration steps.
We have downloaded the configuation guide and we have completed other platforms(like windows and solaris) ADS configurations without any issue.
But the iSeries we don't have any help from documents. Please help on this.
We have NW 7.0 EHP1 system with ABAP+JAVA in iSeries platform.
please guide us..
Thanks and Regards,
Jibin.

Hi Sai,
Yes, I agree with your statement ADS always has configuration on ABAP and JAVA side nothing to do with the OS level.
But in iSeries we require JAVA DI with other OS like windows or unix etc. JAVA engine in OS400 side ADS configuation will not work.
We have configured one Windows Java dialog instance and now working fine. remains all the steps involved in ADS configuration is same.
Please confirm if you are configured ADS in iSeries platform without any addtional DI in your organization/projects and please provide the configuration steps.
Thanks for your reply.
Thanks and Regards,
Jibin.

ADS configuration Instance dialog iseries

Hello I am confising about the configuration
I have teh solman system with java + abap in iseries 5v4 , I installed the dialog instance java (Windows server Nº 10) Now I want to configurate the ADS in this system but i have any questions:
1.- in the guides are steps about visual administrator this visual is the solman system ??
2.- Are the user ads_agent and ads_user created in the 001 client?
3.- this test : http://:/AdobeDocumentServices/Config where is the name of the J2EE engine where the Adobe document services are installed, and is the port of the J2EE engine.
Server and port is the dialog instance(Nº 10) or solman system(nº 01)
I have many problem with configuration or
How can I check if there are any problem between solman system (abab + java) and dialog instance (java)
Thanks
Danny

Hello,
Greetings for the day,
We are in the process of configuration of ADS in iSeries platform. Can you please guide us the configuration steps.
We have downloaded the configuation guide and we have completed other platforms ADS configurations without any issue.
But the iSeries we don't have any help from documents. Please help on this.
We have NW 7.0 EHP1 system with ABAP+JAVA in iSeries platform. please guide us..
Thanks and Regards,
Jibin.

ADS Configuration in BIW

Hi,
I want to Configure ADS in BIW system.Is it the same way how we do in ECC or there is a seperate documentation for ADS Configuration in BIW.
Please give me a solution and the documentation for ADS configuration in BIW.
With Regards,
Pradeep.B

Hi Arafat,
I didnt get you exactly.You mean to say i need to do ADS Configuration with the reference to Portal and BIW.
I mean applying ADS patch in EP,configuration in ep and creating a ADS RFC connection in BIW.
This is how i need to do.
please let me know.
Thanks and regards,
Pradeep.B

ADS Configuration for GP

Hi,
Hi i'am configuring ADS in Portal for GP process and at one stage it asked me to enter Alias,Password and Credential.How i can get this credential file and the password belongs to credential file or Alias?
I got strucked up here so please anybody help me in this issue.
with regards
Pradeep.B

you have to place it in a specific directory:
/usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/TrustManagerService/trust/credentials
check http://help.sap.com/saphelp_nw70/helpdata/en/fe/e8cc48abee49f082dfbd5b45d98dd4/frameset.htm for ADS configuration
best regards, achim

How i check ads configuration working fine ?

Hi,
How i check my ads configuration working fine ?
Regards,
Gurprit Bhatia
Edited by: GURPRIT BHATIA on Jun 9, 2008 2:15 PM

Thanks arafat,
I need some more help regarding this issue. I checked that working fine as u say.
But still my Interactive forms gives error like
com.sap.tc.webdynpro.services.exceptions.PDFDocumentCreationException: ../../local/Test_Interactive/TestInteractive/~wd_key19_1213015656616/Error+PDF.pdf;jsessionid=(J2EE1769300)ID0821942250DB10853844897087772781End;saplb_*=(J2EE1769300)1769350?sap-wd-download=1&sap-wd-dl_behaviour=1&sap-wd-cltwndid=3c74abd1362211dd8c0f00144f411328&sap-wd-appwndid=3c74abd2362211ddb81100144f411328&sap-wd-norefresh=X
    at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:405)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:895)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
Please help me to trace this code.
Regards,
Gurprit Bhatia

For showing smartform through dynpro is ther any ADS configuration needs ?

Hi,
I want to show Smartform with dynpro application. I tried it on development server it have worked fine. But same application i tired on quality server but it did not work . So i want to know is there any ADS Configuration needs for that or i have to apply some note for that.
Help will be rewarded.
Regards,
Gurprit Bhatia

Thanks Arafat and Amit for quick answer,
I am working one application in which i am showing smartform through dynpro. In development this application shows Smartform as PDF but When i try same application on Quality or Production . It does not show anything means pdf does not generated.Is there any note for that.
Regards,
Gurprit Bhatia

Adobe configuration on ECC5.0 system

Hi Friends,
I am a beginner to adobe forms. I have few queries regarding configuration. Please clarify me and suggest me if possible.
1).We are currently working on ECC5.0. We have only abap stack dont have Java stack on the system.
I can create layout of the form from SFP Transaction. but when I execute I am getting "Adobe document services error: SOAP Runtime Exception: CSoapExceptionTransport : (100101)".
My query here is, Is it possible to work on Adobe forms in ECC5.0 system without java stack?
2). ADS connection in SM59 Tcode is failing. How to configure this?
Please clarify me as early as possible.
Thanks in advance.
Cheers,
Phani.

Hi Phani,
You can download the following document to configure ADS on your system:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6]
Or I can send you this doc. if you want.
Reward if helpful.
Regards,
Vaibhav Tiwari.

ADS Configuration on ECC5

Similar Messages

Maybe you are looking for