ADS connection error

hi
I am trying to connect the ADS which is configured in SAP Netweaver 7.4 (Portal) from SAP ECC server . When i try to test the connection using SA59 Transaction using the following program FP_TEST_00, i am getting the following error. can any one let me know what is the issue. Required destination is created in Portal for ECC system its working fine.
ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101)
Message no. FPRUNX001
Diagnosis
An error occurred when Adobe Document Services (ADS) was launched.
System Response
Error message
Procedure
When troubleshooting, follow the steps described in SAP Note 944221.
First check the connection to ADS. You can use the program FP_PDF_TEST_00 to do this. From SAP NetWeaver Release 7.0, the program FP_CHECK_DESTINATION_SERVICE must also run successfully (both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.

RCA for above issue
Possible causes are that the configuration of Adobe document services is incorrect, there are errors in the form or the printer configuration is incorrect.
Please Refer This note : 944221
Thanks,
Rahul Yedapally

Similar Messages

ADS connection error while clicking print preview button

Hi Experts
i am getting the following errors while executing
1) By clicking printpreview button under executing FP_TEST_00
ADS: com.adobe.ProcessingException: Problem accessing d(200101)
Message no. FPRUNX001
2) FP_CHECK_DESTINATION_SERVICE by selecting with destination service check box.
SYSTEM Error: com.adobe.ProcessingException:Problem accessing data from Destination :dest:FP_ICF_SID//sapbc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP
3) FP_CHECK_HTTP_DATA_TRANSFER
SYSTEM Error: com.adobe.ProcessingException:Problem accessing data from Destination :dest:FP_ICF_SID//sapbc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP
I checked in the Visual Admin and noticed that
There are two groups and user exists
Gruops :- ADSCALLERS, ADSCallers
User :- ADSUSER
According to docuemnt i tryied to add in the mapping area under security roles tab
ADSUser is showing under the groups Everyone, Authenticated users
But ADSUser is not showing under the both the groups ADSCallers, ADSCALLERS groups
could you please help me in this please
Thanks & Regards,
Arun

I had same problem
I made a mistake in VA that insted of destination system i used java system SID for the connection FP_ICF_DATA_<SID>.
now i changed the connection to ABAP system in VA . FP_ICF_DATA_<SID>.
Example : lets say your java system is TTS and your ABAP system is TTR
initiall i configured FP_ICF_DATA_TTS in my java system by using VA but this is wrong.
then i changed to FP_ICF_DATA_TTR with client information and user information. and this is worked for me.
i made sure the ADS users are working on both the systems and these users are created as service users insted system users.
now my ADS services are working fine

'Connection Error' Sample RTMP video used to work, now no longer works?!

Hello All,
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again.
I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
I checked that port 1935 was open, and it is.
UPDATED:
When I click on the RTMP thumbnail, after the 'Connection Error' message comes up in the player, the following things happen in my server's error log:
"File does not exist: /folder/folder/folder/fcs"
"File does not exist: /folder/folder/folder/open"
The corresponding IP is my own.
The /folder/folder/folder/ corresponds to my public_http folder and related file structure for the website, NOT the RTMP server. I have no idea why the F
MS is looking in my public_http for fcs and open, but it is.
Thoughts?
Please help? Many thanks in advance!
Sincerely,
wordman

SE,
I'm logged on using PuTTY, my server is Linux and I did in fact get to view the log files.
I realize the sample page ought to be discarded as a concern, but I was hoping I might learn something from this.
I don't have the knowledge to try another RTMP player/client, I am brand new to this. I have Flash CS4 Professional, but I need to learn what to do to build a .SWF to play a sample file.
As for player development, I have been doing research on which might be best for me. In the short term I just need a basic player. In the long term, a player with insertable banners (for in-house promotion and identifiaction, not for ads) and a chat function. The banners may not be necessary as I want the player to be located in a stand-alone page as opposed to a pop-up, so I can do banners in the page itself.
I have looked into REOPS and Strobe, but the tech is written in engineer-speak so most of it is zooming right over my head. I'm self-taught with PHP so I know this all can't be THAT difficult. The jumping-off point is hard to find though. I need something in human-speak that's a wee easier to understand. A basic player would be lovely right now. I don't even care about skinning, just colors.
Using the command to check if FMS is running leaves me with 4 lines of info: 5-digit number, ? 00:00:00 fmsmaster (fmsedge, fmscore, fmsadmin)
Does that mean it isn't running? If so, what can I do to restart it and worse, why would it have stopped?
Thanks for your help!
Sincerely,
wordman

Ads soap error

if i execute adobe form in tcode sfp there is a soap error with adobe document services

Hi Vijay,
I doubt about your ADS configuration. Can you please check the following to know whether ADS is properly configured in your system or not.
There are couple of programs to test the ADS connecticity for ABAP side.
Program FP_PDF_TEST_00: When this program is executed it returns ADS version.
That means the connection is working fine.
Program FP_TEST_00: A demo pdf-based print program, returns pdf output when executed.
If you want to test the ADS connectivity for Portal side,
then use the link that you mentioned (http://<portal_hostname>:51000/AdobeDocumentServices/Config) .
Click and proceed the Test process until you see the ADS version (some where in the output).
IF you are able to see ADS version, it means that the connectivity is fine.
Thanks
Ramakrishna

ADS configuartion error

Hello All,
I am configuring the ADS in our ECC 6.0 system . I am facing two issues :
Issue 1:
I had completed all the steps for configuring ADS in the system. But when I run the Adobe form builder test from sfp transaction for the test form "FP_TEST_00" I am getting an error when executing the test function module for that test form saying :
"Exception SYSTEM_ERROR
Message ID: FPRUNX Message number:
Message:
ADS: com.adobe.ProcessingException: Problem accessing d(200101)
What might be the issue???? We configured the Basic authentication and not SSL.
Issue 2:
Our J2EE is pointing to the client 001 and 800 is the ABAP development client .
We had created a RFC destination by name "ADS" connection type "G" as part of the ADS configuration .
IN SM59 when I do a test connection on both clients ADS Rfc destination is working only in client 001 (J2ee client) and not working in 800 client In client 800 it's telling the error " SR000 : ICM_HTTP_CONNECTION_FAILED".
What might be the issue in 800 client?
Thanks & Regards
venkatesh

Dear venkatesh,
Issue 1:
Have you performed the necessary configuration in visual administrator also....the configuration in visual administrator are more crucial...
Issue2:
The RFC "ADS" is for the java client (001) to connect to the respective service....it is not for the Abap client...thats why it is failing for 800....
Regards,
Siv

Checking the ABAP connection - error

Hi
According to the ADS config guide for NW2004s, I wanted to test the ABAP connection. I went to t.code SA38, entered FP_PDF_TEST_00 and entered the connection name, and when I execute it I get the error
Error Code: 2
Error Message: ADS
Invalid http conenction: ADS
No version available.
Can anyone please explain me where and how should I set the http conenctions to make this test successful.
Thanks in advance
regards
SM

Hi SM,
Programs FP_PDF_TEST_00 & FP_TEST_00 are completely different.
The program FP_PDF_TEST_00 that you run is just returns ADS version only.
If you execute the program FP_TEST_00, it will show you PDF output. That is this program takes the PDF form name FP_TEST_00 in the selection-screen parameter and also ADS destination name and will return you the PDF Output.
Basically you will do the following steps to run an Adobe Form.
1. Get the generated function module name for the Adobe form using function module FP_FUNCTION_MODULE_NAME.
2. Call the function module FP_JOB_OPEN. here we have to pass ADS connection, Device name, No dialog option...etc
3. Call the generated function module , here we an pass SAP data from the print program.
4. Call the function module FP_JOB_CLOSE.
For more information, check the program FP_TEST_00 code .
Thanks
Ramakrishna

Data Federator data source not available causes Universe Connection error

I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.

Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand

RFC connection Error in SLDCheck

Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details     ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
Regards

Thanx for reply
when I test connection to Connection Test SLD_UC     error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 62
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:05:42 2010
Error Details     VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon     Cancel
Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details     ERROR: max no of 100 conversations exceeded
Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
Error Details     COUNTER: 82
Error Details     MODULE: r3cpic_mt.c
Error Details     LINE: 10791
Error Details     RETURN CODE: 466
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:12:56 2010
Error Details     VERSION: 3
Regards
shahid

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

RFC connection error (VPN-access)

Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
Thom

Hi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!!

RFC connection error when registering PROGRAM ID.

Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.

Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 -> Done2. Create new destination of type T (TCP/IP) -> Done
3. Make sure you select Registered Server Program option before writing your program ID -> Done
4. Write you program ID (remember it's case-sensitive) -> gave the SID name
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) -> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out.

RFC Connection Error during Web AS ABAP Database Instance

I keep getting RFC Connection error installing the database instance. The following are the pertinent logs:
INFO 2007-05-09 20:10:04
Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
INFO 2007-05-09 20:10:04
Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
INFO 2007-05-09 20:10:22
Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
INFO 2007-05-09 20:12:23
RFC parameter CLIENT set to value 000.
INFO 2007-05-09 20:12:23
RFC parameter USER set to value DDIC.
INFO 2007-05-09 20:12:23
RFC parameter LCHECK set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter PCS set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter LANG set to value EN.
INFO 2007-05-09 20:12:23
RFC parameter ASHOST set to value cix22.
INFO 2007-05-09 20:12:23
RFC parameter SYSNR set to value 00.
INFO 2007-05-09 20:12:23
RFC connection information checked successfully.
ERROR 2007-05-09 20:12:24
FRF-00007 Unable to open RFC connection.
I tried the following fixes spread across different threads in this Expert Forums:
1. Someone said network problem. I rebooted, restarted the install and even redo it.
2. Another suggestion was to use caps on the password. Didnt work.
3. One suggestion was to update the keydb.xml file. However, I could find such property name:
search for the table t_SAPComponent_SAPSystemLogon_SHARED
then look for <fld name="pPW">, <properties>,
<property name ="GUIENG_USER_INPUT" and set the value
"GUINEG_TRUE" to "GUIENG_FALSE".
4. I even used the ddic password 19920706 which is supposed to be the default.
5. Restarted the instance and applied all the fixes above.
Does anyone know what is going on base on the logs above? Thanks.

try moving all your install disk onto local file system then rerun the install. That might work....

Haven't been able to connect to itunes for 3 days. Says connection error but im connected to the internet

I haven't been able to connect to itunes for 3 days. It says theres a connection error, yet I am connected to the internet. I have redownloaded itunes and still get this message.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

ADS connection error

Similar Messages

Maybe you are looking for