ADS Credential Problem

Hi,
In the configuration guide it is said that after we give the alias name and the password for the credential the page will refresh and the registerd credential will be shown.
In my case i gave the alias name and the password as given by SAP but the credential did not get registered that is i could not see my credential file under the credentials tab.But i did not get any error message as well.
Is there any way to know whether the credentials has been registered.
Regards,
Vijith

Hi,
I have specified the Credential during installation and i can see the same .pfx file in the Trust/Credentials directory.
While registering iam able to select the credential and i have also given the password provided b SAP but the page does not refresh when i press the add button.I tried restarting the service but even that did not show the list of registered credential.
Regards,
Vijith

Similar Messages

  • Facing Credential problem

    Hi,
    I facing the error when run interactive form application.
    I know this is hapenning because of credential problem.
    I can't request BASIS for this problem.
    Some where it is checking the credential while calling the applications.
    So i think we can avoid this error in debug by changing the variables.
    Do you have any idea to do this?

    Hi shivakri,
    The ReaderRights credential is needed when ADS is rendering an interactive PDF form. The credential is used to apply the usage rights. There is no way of by-passing this for interactive forms. If you want to use them you need to install the ReaderRights credential as described in the config guide.
    This has nothing to do with the licensing.
    Regards,
    Juergen

  • Outlook credential problem

    We migrated our Exchange server from 2007 to 2013. My email worked fine for two months. Now I have a problem.
    A couple times per day, my outlook 2013 prompts me for credentials.
    In most cases, this problem is fixed automatically. Even I don’t enter the password, Outlook woks after it prompts for the credentials for a couple minutes.
    It is not connectivity issue because all computers I try have the same problem. Also my emails on iPhone and OWA have the same problem.
    I am only user have this problem.
    I don’t have credential problem when I login the network.
    When I see NEED PASSWORD warning on the right bottom, I don't need to enter the password. I double click on NEED PASSWORD, then Outlook works and change back to CONNECTED TO.
    7. sometimes, I see this message and it tries to connect to
    https://exchange.ourdomain.com/autodiscover/autodiscover.xml that is exchange 2007. the new exchange server should be mail.ourdomain.com.
    Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

    Hi,
    It’s abnormal that Outlook still tries to find the old autodiscover point.
    This issue can occur if the old Exchange 2007 autodiscover SCP information is still present in AD. I suggest we firstly remove it via ADSIEDIT and see whether it works:
    http://technet.microsoft.com/en-us/library/bb124251(v=exchg.150).aspx
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Where can I download the latest ADS credential?

    Hi, All.
         Where can  I download the latest ADS credential for 2010?
         I only got one for 2009.  THX.

    If you are talking about the the Trial License which you can download from SDN then SAP has yet not updated it.
    Should be available in couple of days once New Year excitement is down
    Chintan

  • ADS Credential Rights Issue. All reports checks successful...

    I am having an ADS issue in my EP production environment. When users click on any adobe form, it gives 2 popup, stating
    1) u201CThis document enabled extended feature in Adobe Reader. The use of the extended features has expiredu201D
    2) u201CThis document enabled extended feature in Adobe Reader. The document has been changed since it was created and use of extended feature is no longer available. Please contact the author for the original version of this document.u201D
    And it displays the below errors in the log.
    Log location:--> /usr/sap/<SID>/JC00/j2ee/cluster/server0/log
    1) com.adobe.ProcessingException: Required stream: "PDFDocument" not found in request OR its length is zero.
    2) com.adobe.ProcessingException: Credential login error while applying usage rights to PDF: /var/tmp/adobewa_EPP_14070851/DM-4025786556068948812.dir/DM-6606423593397490494.tmp
    Specific error information:
    error while logging into credential '^0'
    GeneralError: Operation failed.
    SecurityHandler.login:-1:
    Could not create temporary file
    Troubleshooting Steps I have followed
    Step 1: I observed the u201CCredential Keyu201D in Visual Admin got expired.
    Action: I sent a request to SAP Market place to request a new credential key and got a new key.
    Resolution: The credential key was applied to all server nodes, all required ADS service were restarted and u201CWASu201D was restarted.
    Step 2: Ran reports (FP_TEST_00, FP_PDF_TEST_00, FP_CHECK_DESTINATION_SERVICE, and FP_TEST_IA_01)
    Action: Ran reports in se38
    Resolution: All reports were successful.
    Step 3: Followed all instructions for the below links
    Action: /people/dezso.pap/blog/2007/01/10/common-problems-with-sap-interactive-forms-by-adobe--part-i- --> (ADS troubleshooting issuses)
         https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98   --> (Installing credentials and configuring ADS)
    Resolution: Did not resolve my issues.
    Step 4: Open a very high priority ticket with SAP.
    Action: Sent SAP all the logs and screen shot of problems.
    Resolution: None! SAP canu2019t figure out the problem.
    Kindly assist me, if you have encountered this issue before. Your assistance is greatly appreciated.
    Regards,
    Haffiz

    Hi Haffiz,
    I have your same problem:
    Credential login error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_S19_197736650\DM-7159480439143838974.dir\DM-6724718864855579594.tmp
    I just installed the credential
    the FP_TEST_IA_01 failed at running
    How you have resolved this problem?
    Best Regards
    T.Anderson

  • Host Credential Problem

    I try restarting my 10g db. I have given the proper OS and DB credentials but the system still tells me that the host credentials are incorrect. I can't figure it out and it's driving me nuts.
    Any insight as to how I can track down a fix?
    Jim

    hi,
    were you able to save your problem. I am also trying providing host credential in OEM by providing OS user name & password of user which I used to login to machine where oracle is running but it says wrong username/password.
    thanks in advance

  • ADS configuration problem

    Hi guys,
    I'm facing a problem with the configuration of the ADS.
    First I had only ABAP AS, my BASIS man installed for me a JAVA AS beside the ABAP.
    I didn't do any configuration for the ADS or any thing, I started with report FP_PDF_TEST_00 which gave me this error
    ADS:SOAP Runtime Exception: CSoapException Transport :(100101)
    Now I don't know really from where I should start my configuration, and bear in mind that I want to use only the Adobe Print Forms, I don't need interactive forms.
    Reagrds,
    Mahmoud

    Hello ,
       To start with ADS configuration , please check the
    ADS configuration guide provided by SAP -
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6
    you can also take help from link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/1094a46a-ce44-2a10-e7bf-b934ab505b0a [original link is broken]
    hope this helps.
    Thanks,
    Sahiba

  • SQL Server 2008 R2 Report Server Credential Problem

    All
    When our report viewer connects to the remote report server, we got HTTP 401 unauthorized problem.
    When we copy the report url into IE, it asks for user name and password. If I typed in the report server's windows credential, I can access the report. I don't want to reveal my server's credential. So I tried to configure the report server to no credential
    I found some links talking about configuring SSRS for unattended account
    I configured one. It seems that this account must be a valid windows account of the report server.
    Then I logged in Report Manager remotely and configured the data source to the following options:
    Windows integrated security
    Credentials are not required
    It does not help.
    Does anyone have any suggestion?
    What is the right way authenticate client to remote access the report server?
    Thanks,
    FL

    My winforms ReportViwer still failed to connect to the Report server. The server is on a win 2008
    server R2. 
    Both client and server computers are not on any domain, but connected to the same wifi network.  I disabled loopback check as MSFT kb suggested (http://support.microsoft.com/kb/896861)
    Does anyone know how to solve this logon issue?
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          2/10/2010 7:34:06 PM
    Event ID:      4625
    Task Category: Logon
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      serverName
    Description:
    An account failed to log on.
    Subject:
                    Security ID:                         NULL SID
                    Account Name:                 -
                    Account Domain:                             -
                    Logon ID:                             0x0
    Logon Type:                                       3
    Account For Which Logon Failed:
                    Security ID:                         NULL SID
                    Account Name:                 reportUser
                    Account Domain:                             serverName
    Failure Information:
                    Failure Reason:                 Unknown user name or bad password.
                    Status:                                  0xc000006d
                    Sub Status:                         0xc000006a
    Process Information:
                    Caller Process ID:             0x0
                    Caller Process Name:     -
    Network Information:
                    Workstation Name:        123-PC
                    Source Network Address:            -
                    Source Port:                       -
    Detailed Authentication Information:
                    Logon Process:                  NtLmSsp
                    Authentication Package:               NTLM
                    Transited Services:          -
                    Package Name (NTLM only):       -
                    Key Length:                        0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
                    - Transited services indicate which intermediate services have participated in this logon request.
                    - Package name indicates which sub-protocol was used among the NTLM protocols.
                    - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
        <EventID>4625</EventID>
        <Version>0</Version>
        <Level>0</Level>
        <Task>12544</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8010000000000000</Keywords>
        <TimeCreated SystemTime="2010-02-11T00:34:06.646670900Z" />
        <EventRecordID>4706</EventRecordID>
        <Correlation />
        <Execution ProcessID="476" ThreadID="528" />
        <Channel>Security</Channel>
        <Computer>serverName</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="SubjectUserSid">S-1-0-0</Data>
        <Data Name="SubjectUserName">-</Data>
        <Data Name="SubjectDomainName">-</Data>
        <Data Name="SubjectLogonId">0x0</Data>
        <Data Name="TargetUserSid">S-1-0-0</Data>
        <Data Name="TargetUserName">reportUser</Data>
        <Data Name="TargetDomainName">serverName</Data>
        <Data Name="Status">0xc000006d</Data>
        <Data Name="FailureReason">%%2313</Data>
        <Data Name="SubStatus">0xc000006a</Data>
        <Data Name="LogonType">3</Data>
        <Data Name="LogonProcessName">NtLmSsp </Data>
        <Data Name="AuthenticationPackageName">NTLM</Data>
        <Data Name="WorkstationName">123-PC</Data>
        <Data Name="TransmittedServices">-</Data>
        <Data Name="LmPackageName">-</Data>
        <Data Name="KeyLength">0</Data>
        <Data Name="ProcessId">0x0</Data>
        <Data Name="ProcessName">-</Data>
        <Data Name="IpAddress">-</Data>
        <Data Name="IpPort">-</Data>
      </EventData>
    </Event>

  • Adobe credential Problem

    Hi,
    I am getting the following error :
    com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: ADS Render Exception occured. Append "sap-wd-errorPdf=true" to the URL and access the application once again. This time you will get an error PDF. Save the error PDF on the file system. This is a helpful attachment in case of an OSS message. com.adobe.ProcessingError: Error while retrieving a password for credential: ReaderRights: java.lang.Exception: Could not retrieve a password for credential: ReaderRights Exception Stack Trace: com.adobe.ProcessingError:
    How do I get the Adobe credentials installed i got the link the from this thread :
    SAP Interactive Forms by Adobe
    and installed the personal information exchange file , but in the visual admin its asking for a serial number...is that available only to the customers or any sort of trial is also available.What is the right procedure to go about this?
    Regards,
    Bhavana

    Hello,
    Have you requested a credential file from SAP? It is described in SAP note:
    #736902
    If you have this in the configuration guide you will find how to install the ReaderRights alias in the VA.
    The password for the credential is in the response message from SAP in the customer ticket. If you have lost the password open a new ticket and SAP will send you the password again.
    Best regards,
    Dezso Pap

  • ADS Credential File

    Hi,
    I am trying to configure the ADS on the Sneak Preview, The link given to download the ADS credentials is
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/adobe_credential_sneakpreview_nw04.zip
    I am getting quite an old credential file which is valid only till June07. Has the link changed..? Can someone please send me the new credential files if you have.
    Thanks in advance.
    regards
    Prashant

    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/500e7034-d86d-2a10-7481-b46a67b8c67e
    hi,
    goto the above link....
    at the bottom of the page there is this link... "Credential and Password"...
    click on it to get ur credential and password.
    this should be good till FEB 08.
    regards,
    -Ag.

  • Ads Pyro problem

    Just got an Ads Pyro yesterday to transfer my old VHS tapes to DVD. Problem is that the unit keeps dropping the connection while I'm capturing. Sometimes within a few seconds, sometimes a few minutes. Currently as soon as I hit the play button the VCR, it immediately loses the connection.
    I checked all the tech support info and tried the dip switches in all positions, all switches down seems to work best otherwise PE3 just crashes. Done all the defrags, and shut down all other software, etc., but the problem still exists. As of now the Ads Pyro is unusable, in two days I've only managed to capture about 15 minutes of video which is acceptable quality but not all that good. Any suggestions??
    XP/Home/SP2 Pentium4 3.0 1gig ram

    See if http://www.scenalyzer.com/main.html will work
    Download is free, program functions... but does put a watermark every few frames
    Watermark can't be removed (as far as I know) so don't do any real work until you pay and receive the unlock code
    Of course, if you have a hardware problem, no software is going to work

  • ESSO LM Agent Capturing application credential problem

    Hi all,
    In my test environment Am having the following
    Oracle ESSO Logon Manager
    ESSO-LM Administrative Console Version 11.1.1.5.1
    IN Active Directory having two Organizational Units(OU) says
    ESS , IMS
    In both OU's am having 2 users.
    In ESS says <font color="red">essuser01, essuser02</font>
    and in IMS says <font color="red">imsuser01, imsuser02</font>
    Domain Name : example.com
    I have installed Admin Console in Windows 7 pro.
    and LM Agent have been installed in another system also having Win 7.
    In Left pane of my Admin console
    Under
    Global Agent Settings > Live > Synchronization > ADEXT
    Base Location for Configuration Objects sets to
    <font color="red"><li>OU=ims,DC=example,DC=com</li></font>
    <font color="red"><li>OU=ess,DC=example,DC=com</li></font>
    Location for storing user credentials sets to
    Under respective directory user objects
    Having Applications
    ESS_yahoo - For yahoo mail login
    IMS_Gmail - For Gmail login
    Have published ESS_Yahoo(Application) and Live(Global Agent Settings) to target repository
    OU=ess,DC=example,DC=com[example.com]
    Similarly,
    IMS_Gmail(Application) and Live(Global Agent Settings) to target repository
    OU=ims,DC=example,DC=com[example.com]Problem is while login as IMS or ESS users LM Agent is capturing both applications.
    Even I set
    Global Agent Settings > Live > User Experience > Application Response > Initial credential Capture > Limit response to predefined applications for
    All application Types & Web Applications set to
    <font color="blue">Predefined applications only</font>My need:
    For ESS users Agent must capture only Yahoo credentials,
    same as IMS user it must capture only Gmail not yahoo.
    What i have to do. Am newbie to ESSO.
    Response will be appreciated.
    Bala:)

    A few key element :
    In the admin console : Navigate to Global Agent Settings -> Live -> Synchronization
    Disable role/group security support.
    Note : Database Synchronization will not work with this option enabled
    Then :
    Navigate to Global Agent Settings -> Live ->
    Synchronization->DBEXT ->Required
    Specify the database servers with one of the following values:
    Provider=OraOLEDB.Oracle;Data Source=orcl;Extended
    Properties='OSAuthent=1';
    Provider=OraOLEDB.Oracle;Data Source=orcl;User
    Id=SYSTEM;Password=Manager1;
    orcl
    Then : Navigate to Global Agent Settings-> Live -> Synchronization
    -> DBEXT -> Advanced and enable Append Domain when naming objects
    To connect to the DB to distribute Application Use :
    Connection String : Provider=OraOLEDB.Oracle;Data
    Source=orcl;User Id=SYSTEM;Password=Password1;
    Repository Type : Generic Database
    Then you can deploy application the the DB, using the configure SSO support....
    Good luck

  • BI Widgets on AIR credential problem

    Hi experts ,
    i have one problem , i was installed BI Widgets on AIR in my mechine it's working fine, but the same software i was in stalled in my office loptop it's installed successfully, when give  credential for BOE server its not taken ,Business objects working fine (infoview,webi,deski,designer and even life office )all are working fine,the only problem is BI Widgets are not taken the credential
    at the time of installation i was installed supported software's also like Adobe AIR, flash player
    can any one help me these issues

    Hello akhil32 ,
    as you refer to a Webi problem (BI Widgets) I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
    This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all Webi queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Host Credential Problem in Oracle 10g on Windows

    Hi,
    I have another problem that is really bothering me. I
    have tried using Oracle database 10g on Windows XP and
    it works fine till you shut down and attempt to
    restart (or any administrative task)with the EM. It
    asks for the Database and Host credentials but always
    rejects the Host credentials. Now because i only have
    the Administrator as the OS user, i try to give this
    user and it's password and it still doesn't accept
    that.
    What could be the problem??? I infact have realized
    that this problem is NOT there if i use 10.1.0 on Red
    Hat Linux AS 3 because for the host credentials i use
    the OS user Oracle and the password (Owner of Oracle
    Installation)and it goes through fine.
    In Windows, what should i do to rectify this problem.
    Or is it a bug with Oracle on Windows. Or where should
    i get the relevant Host credentials Oracle requests on
    Windows or should i create a user??? Please
    HELP!!!!!!!!!!
    Austine

    That could be the 'Log on as a batch job' problem. See here:
    Re: Operating system user for Host cridentials

  • Host credential problem on XP Pro

    Hi everybody.
    Maybe I'm kicking in open doors here regarding the problem with host credentials in EM, but I think I found something.
    As I have read in other posts I added my user account to the "Logon as batch job" in "Local security settings". When I add my user name there it gets registered as [domain]\[user name] since I'm on a domain.
    But what I found is that the credentials must be supplied as [domain]\[user name] in EM as well or it won't work (you get the "wrong password for user" error.
    Hope it helps someone a least. :)

    Yes, very true..if it's a domain user, you will have to specify domain\username

Maybe you are looking for