ADS FP_test_00 test error
Hi Guys
I am getting this error when i run the FP_TEST_00 script
ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101)
I have followed all the processes in the guide and the RFC is running okay. The system is on AS/400 and the ADS services are on windows 2003 server which we use as our solutin manager
Please advice
The note refers to large sizes over 64kb and that was resolved in 640 we are on ECC 6 SR3
The thing is it worked before and then one of the administators changed the password on the target system and we have since put the passowrd to original state but dont know why its not working anymore
Thanks
Similar Messages
-
Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro
The motor on the exhaust fan has failed or is failing.
-
Mac mini server: Hardware test error on Hard Drive
Mac mini server: Hardware test error on Hard Drive
'checking for slow read failures': ERROR - Target device access failure - Test failed.
CAN I ACCESS HD (which is our data server) EVER AGAIN? IF SO, HOW?
Meanwhile we wonder if this is really a hardware error. It all happened during writing a time machine backup.
Probably while writing it, some data was relocated by accident, but we can not 100%-sure remember the sequence of actions :/
This is our trauma history:
- time machine got increasingly slower in writing a backup
- we quit the backup
- we switched off the mac mini (on power button)
- we switched on the mac mini
- we stopped time machine to the rules
- we shut down mac mini via command
- we booted the mac mini in save mode
- we see a loading bar
- no progress after 10th of loading bar
- switched off (power button)
- when we now switch on the loading bar below the apple-logo is all we see + the little wheel
- we started with cmd+alt+p+r pressed
- mac mini restarted but showed the loading bar scenario without progress again
- we started with 'd' pressed and did the hardware test (see above)
- we started with 'alt' pressed but it does not give us the recoverydrive to run the last backup
ANY IDEAS?
IS IT A SOFTWARE- OR HARDWARE ERROR?
THX IN ADVANCE!BDAqua wrote:
I thnk Intenal 2.5" Drives for servers is silly, & Ithink the Minis & iMacs re poorly cooled.
I'd get Temprature Monitor & see what temps they're running.
Is Temperature Monitor an app or a device? If it's a temperature problem then that is essentially a design problem. Two drive failures in the same Mac mini server in four months combined with the fact that they're not really user serviceable already has me 90% on the way back to more pragmatically designed Linux servers. I think it would be foolish to waste any more money on these minis for my business hosting. -
what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?
Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.) We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient. While chatting I initially reported it was cool at the bottom and warm at the top. Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that. -
Apple hardware test error 4mem/9/40000000: 0x8475d598
Any help would be appreciated I'm at work and my MBP crashed twice (Running Traktor Pro 2 with Drobo Mini as an external HD via Thunderbolt. second display daisy chained on VGA with a rotating desktop image to the TV's ) ...Just got this error code from my late late 2011 15in MBP after it randomly restarted and I ran the hardware test
apple hardware test error 4mem/9/40000000: 0x8475d598
This was after it crashed earlier and I got this report:
Anonymous UUID: 5948A12D-654D-DE02-D43C-4073A8690165
Sat Jun 21 17:31:41 2014
panic(cpu 0 caller 0xffffff8000a2ebe9): "Spinlock acquisition timed out: lock=0xffffff8024478110, lock owner thread=0x8000000000000000, current_thread: 0xffffff8025f64cf0, lock owner active on CPU 0xffffffff, current owner: 0x8000000000000000"@/SourceCache/xnu/xnu-2422.100.13/osfmk/i386/locks_i386.c:36 5
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb5f3ec0 : 0xffffff8000a22fa9
0xffffff81eb5f3f40 : 0xffffff8000a2ebe9
0xffffff81eb5f3f70 : 0xffffff8000ac989d
0xffffff81eb5f3fb0 : 0xffffff8000af3c76
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide: 0x0000000000800000
Kernel text base: 0xffffff8000a00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 18623716072818
last loaded kext at 18480408803348: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f833c5000, size 49152)
last unloaded kext at 18566085554385: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f833c5000, size 32768)
loaded kexts:
com.TrustedData.driver.VendorSpecificType00 1.7.0
com.drobo.SCSI.ThunderBolt 1.1 [66012]
net.kromtech.kext.Firewall 2.3.6
com.attotech.driver.ATTOiSCSI 3.4.1b1
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.filesystems.smbfs 2.0.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.15
com.apple.iokit.IOBluetoothSerialManager 4.2.4f1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 1.2.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHDA 2.6.1f2
com.apple.driver.AppleHWAccess 1
com.apple.AMDRadeonX3000 1.2.2
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.4f1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.5.26
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.kext.AMD6000Controller 1.2.2
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.driver.AppleUSBHub 666.4.0
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleSDXC 1.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter 1.4.5
com.apple.driver.IOBluetoothHIDDriver 4.2.4f1
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.driver.AppleUSBAudio 2.9.5f4
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.4f1
com.apple.driver.DspFuncLib 2.6.1f2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.20
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.4f1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.5.26
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d11
com.apple.driver.AppleSMC 3.1.8
com.apple.kext.AMDSupport 1.2.2
com.apple.AppleGraphicsDeviceControl 3.5.26
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.1f2
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.1f2
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 677.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x857F, 0x483634314755363746393333334700000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x857F, 0x483634314755363746393333334700000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
PCI Card: scsi, SCSI Bus Controller, Thunderbolt@195,0,0
Serial ATA Device: Samsung SSD 840 EVO 250GB, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Duet USB
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1
Thunderbolt Device: Mini, Drobo, 1, 26.3The Apple Hardware Test error indicates a RAM issue. Install the original RAM and see if that improves the situation.
Also these items may perhaps be conributing causes:
TrustedData.driver.VendorSpecificType00 1.7.0
.drobo.SCSI.ThunderBolt 1.1 [66012]
.kromtech.kext.Firewall 2.3.6
attotech.driver.ATTOiSCSI 3.4.1b1
Ciao. -
Benchmarking problem ORiON solaris 10 - non test error occured
Hi,
I am running a whole bunch of ORION jobs in sequence against raw LUNs on an EMC storage using Solaris 10.
This to identify the performance at different read/write percentage and random/sequential IO patterns.
Once in a while, in the middle of testing the following appears :
Non test error occurred
Orion exiting
After which the test aborts.
I am trying to investigate the cause for this error, the DMESG and /var/adm/messages left turned up nothing however.
The strange thing is that the next test using the same amount of LUNs but only a difference in random or sequential pattern (or read/write percentage) works just fine.
Does anybody have any reference to what are possible causes of "non test error"
Thanks
sebThis forum is about using Sun Studio. Your question is about tripwire, which is not a Sun product, and gcc, which is not Sun Studio. I suggest you take your question to a tripwire forum. Check the location where you got tripwire for a support forum.
-
Suddenly the ADS stopped working after near to a month period.
When trying to execute the program FP_PDF_TEST_00 , i am getting the following error
SOAP runtime exception: CSoapExceptionTransport : (100101). As per the this discussion in the thread adobe document services communication problem
I tried to perform
Visual Administrator -> server -> service -> security provider
-> User Management -> select user ADSUser
Then check for 'No password change is required'. and got the error "unable to setup user properties panel"
After that i tried to change the "security policy" field dropdown through the UME for the ADSuser but it coming in readonly mode and it is pointing to Default.
I am using CRM 6.0 with version 7.00 SP12 . Any ideas what is happening ?
Edited by: Dharm dhwaj Singh on Jul 17, 2009 12:13 PMHello
for PDF printing you need ADS configuration. You can check if ADS is configured in your system using program
FP_PDF_TEST_00.
Execute this program in SE38 and it should give you ADS version if its installed else SOAP error if its not configured.
if you have SOAP error ask your basis guy to configure ADS. normally SOAP error exist is you are not able to connect to ADS because of expiration of password to the ADS server.
Hope this helps.
you can also refer below link.
http://help.sap.com/saphelp_nw70/helpdata/en/6f/8e0a414f3af223e10000000a155106/content.htm -
Render Error: Intern test error
Hello,
i get always a render error message: Intern test error. This occurs randomly.
I´ve the newest Version 11.02. Anybody outhere who have the same error?
How can i fix this problem?
Thanks so far for your help :-)
Regards
PeterHello Mylenium, sure i´ve ment "internal test error".
I get no special error code just this message.
I had a picture in jpg-format (621kb), two hour audio mp3-file(270MB), After Effects Audioline Effect and nothing more.
This error appears since the newest version of After Effect appeared.
Best Regards
Peter -
Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704
Trying to track down fast running fan that will not reset and this error came up.only apple techncians have access to what those codes mean. It is sensor related, but as it is a hardware problem, you need to bring it into an Apple store or AASP to have it correctly diagnosed and fixed.
-
E-Load: Test Error 12, vba failed afterPlay
h5. Have you ever received this error in e-Load? I have VBA in a script and it is working in both e-Tester and Navigation Editor, but when I playback in e-Load I get this error.
{color:#ff0000}*Test Error 12, vba failed afterPlay*{color}
Edited by: Muka on Aug 31, 2008 6:31 PMThat is helpful information about the services and account configuration. I did those steps though and reran the script and got the same result. It plays back fine in e-Tester and Navigation Editor but then fails in e-Load. Here is the VBA that is in the script.
Private Sub RSWVBAPage_afterPlay()
Dim col As New Collection
Dim opt As IHTMLElement
Dim tierDropDownPath As String
Dim tierValue As IHTMLSelectElement
Dim tierStrDB As String
Dim tierSelect As Integer
Dim tierPath As String
Dim optDB As String
Dim result As Boolean
Dim resultb As Boolean
'Check Radio button of newly added dependent for Medical Coverage
result = RSWApp.om.FindElements(col, "Y", "INPUT", "value")
col(col.Count).Checked = True
'Get databank values
result = RSWApp.GetDataBankValue("option_id", optDB)
resultb = RSWApp.GetDataBankValue("tier_code", tierStrDB)
'Transpose Option ID to html value format
optDB = "O" + optDB
'Determine new tier to select. i.e., if employee currently has Employee Only coverage, after add dependent they will be Employee + Children
Select Case (tierStrDB)
Case "0"
tierSelect = 1
Case "1"
tierSelect = 2
Case "2"
tierSelect = 3
Case "3"
tierSelect = 2
Case "4"
tierSelect = 3
End Select
'Select medical option based on Option ID
Set opt = RSWApp.om.FindElement(optDB, "INPUT", "value")
opt.click
'Find tier drop down element and assign to select element variable
tierPath = "window(index=0).form(name=""benTemplateMForm"" | index=0).formelement[SELECT](name=" + optDB + ")"
result = RSWApp.om.GetElementByPath(tierPath, tierValue)
'Set tier to new value
tierValue.selectedIndex = tierSelect
End Sub -
RTC Accuracy Test error reported by Lenovo's ThinkVantage Toolbox 'Quick Hardware Check'
When I run Quick Hardware Check on my T500 using the Lenovo ThinkVantage Toolbox, a RTC Accuracy Test error is reported. Do I need to care about this error and how do I fix it? Thanks.
hey rmbowma,
judging from that error, looks like the CMOS battery that makes sure that the internal clock is dead.
i recommend getting in contact with the support team about this.
http://bit.ly/LNVsuppNum
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
ran apple hardware diagnostics. fan - master - long motor test error: did not reach target speed in time. fan runs all the time. sensor is connected. do I have a bad fan?
ran apple hardware diagnostics. fan - master - long motor test error: did not reach target speed in time. fan runs all the time. sensor is connected. do I have a bad fan?
-
ADS : FP_TEST_00 Exception getting currently running XMLForm Module version
Hi,
We have installed ADS and Currently configuring it.
The Reports FP_PDF_TEST_00 is working fine. But the reports FP_TEST_00 is hanging when i specify the Printer name and click on Print preview.
The Following error message i got in the default trace file.
1.5#001560DE2A38007F000000060000249E00044F4DBB40B6FF#1213095188495#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentSer
vices#com.adobe.AdobeDocumentServices#ADSUSER#136##lux09208_D10_13839050#Guest#6959e66036db11ddc504001560de2a38#SAPEngine_Appl
ication_Thread[impl:3]_52##0#0#Error##Plain###Exception getting currently running XMLForm Module version.
java.lang.IllegalStateException: No transaction
at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:70)
at com.adobe.ads.proxy.ServiceLocator.getXmlfmFactory(Unknown Source)
at com.adobe.EJB_XMLFormAgent.getFactory(Unknown Source)
at com.adobe.EJB_XMLFormAgent.getVersion(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.checkXmlfmVersion(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.ejbCreate(Unknown Source)
at sun.reflect.GeneratedMethodAccessor265.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.ejb.session.stateless_sp5.BeanFactory.createObject(BeanFactory.java:113)
at com.sap.engine.services.ejb.util.pool.ContainerPoolImpl.doResizeOneStepUp(ContainerPoolImpl.java:374)
at com.sap.engine.services.ejb.util.pool.ContainerPoolImpl.ensureNotEmpty(ContainerPoolImpl.java:343)
at com.sap.engine.services.ejb.util.pool.ContainerPoolImpl.pop(ContainerPoolImpl.java:291)
at com.sap.engine.services.ejb.session.stateless_sp5.BeanFactory.getActiveBean(BeanFactory.java:188)
at com.sap.engine.services.ejb.session.stateless_sp5.StatelessContainerFP.getActiveBean(StatelessContainerFP.java:183)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:87)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java
:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
Also the FP_CHECK_DESTINATION_SERVICE report is also hanging with out any output.
The RFC Connectivity ADS is working properly, The Users ADSUSEr and ADS_AGENt are configured properly. I am also able the test the Destination FP_ICF_DATA_<SID> in Visual Admin properly.
The AdobeDocumentSErvices portal is also displaying the version number for me.
Please let me know how this issue can be sorted out.Hello Subramanian,
I am not sure if you have solved the problem of FP_CHECK_DESTINATION_SERVICE report. Using this report test you can check if the complete configuration of the destination service and the ICF service is correct. Since this report is not getting results in your case, I suspect there is problem in Destination Service or the ICF Service.
Kindly do all the steps mentioned here.
http://help.sap.com/saphelp_nw70/helpdata/en/44/63eefb818c311ee10000000a155369/content.htm
Regards,
Shubham -
Hi,
I gone through the ADS configuration document for NW70 and all the settings are exactly same as described in the document but still I am getting the following errors during the check.
1. When I execute test program "FP_TEST_00" I am getting below error,
" ADS: com.adobe.ProcessingException: The rule specified,(200101) "
2. When I execute destination service check using "FP_CHECK_DESTINATION_SERVICE" I am getting error as
"SYSTEM Error: com.adobe.ProcessingException: The rule specified, requires Output PDF named: Nodes, does not exist."
All other tests and configurations are working fine as mentioned in the configuration guide.
Please help me on this issue.
Regards,
Nallasivam.DHi
I am also facing the same issue, can you let me know what was the problem ?
Did you happen to resolve the issue ?
Appreciate your inputs.
Thanks
Sri -
Hello All,
Iam trying to display interactive form thru example FP_EXAMPLE_01 but Im getting error, have switched on the trace here are the details
<b>PDF with additional info</b>
'all' Log Entries
Severity Message Id Date/Time Description
Trace No Errors Reported.
<b>Trace level file</b>
Begin trace
Adobe Document Services Tue Oct 24 11:52:49 GMT+04:00 2006 Trace Results:
String: rp.script.uri = sap/SAPPDFDocument.rps
String: Trace = 10
String: Username = MAHESHB
Stream: PDFDocument
Stream: XFD
IIOP service is running
Created a Data Manager for this request
Locating stream: PDFDocument and loading into a DOM
PdfDocument bytes = 1077
Processing PDFDocument instructions
Parsing the request
Checking request semantics
Request initialization (including DOM construction and validation) processing execution time = 98 ms.
Action: Identity
<Identity><Application> = SAFP
<Identity><Form> = ZDEMO_FORM
<Identity><SID> = DEV
<Identity><Client> = 200
<Identity><IsProductive> = 0
Action: Renderer
Using Template Template (xdp):
Source = URL
Name = dest:FP_ICF_DATA_DEV//sap/bc/fp/form/layout/ZDEMO_FORM.XDP?fp-language=EN&fp-cacheinfo=2006-10-24T04%3a29%3a19Z%24618b0729-7edc-458f-b1bb-4f5d273a67c7%240%24en_US%24v0%2e8
CacheInfo = 2006-10-24T04:29:19Z$618b0729-7edc-458f-b1bb-4f5d273a67c7$0$en_US$v0.8
Setting PDFDynamic to default 0 for this PDF.
Stream = PDFOut
Input node: <Render><Output> = pdf
Stream = PDLOut
URL = hppcl5e.xdc
Input node: <Render><Output> = pcl
Data: XFD
No custom config file found.
Using standard config file: AdobeDocumentServices/lib/xfa.xci
Config setup completed.
Processing exception during a "Renderer" operation.
Request start time: Tue Oct 24 11:52:49 GMT+04:00 2006
com.adobe.ProcessingError: File not found on: URL location: dest:FP_ICF_DATA_DEV//sap/bc/fp/form/layout/ZDEMO_FORM.XDP?fp-language=EN&fp-cacheinfo=2006-10-24T04%3a29%3a19Z%24618b0729-7edc-458f-b1bb-4f5d273a67c7%240%24en_US%24v0%2e8
Exception Stack Trace:
com.adobe.ProcessingError: File not found on: URL location: dest:FP_ICF_DATA_DEV//sap/bc/fp/form/layout/ZDEMO_FORM.XDP?fp-language=EN&fp-cacheinfo=2006-10-24T04%3a29%3a19Z%24618b0729-7edc-458f-b1bb-4f5d273a67c7%240%24en_US%24v0%2e8
at com.adobe.ads.util.FileUtils.getPDFDataFromInput(FileUtils.java:210)
at com.adobe.ads.request.Template.setPDFData(Template.java:222)
at com.adobe.ads.request.Renderer.initializeTemplates(Renderer.java:468)
at com.adobe.ads.request.Renderer.execute(Renderer.java:395)
at com.adobe.BaseADSRequest.doWork(BaseADSRequest.java:111)
at com.adobe.AdobeDocumentServicesWorker.processRender(AdobeDocumentServicesWorker.java:1142)
at com.adobe.AdobeDocumentServicesWorker.execute(AdobeDocumentServicesWorker.java:598)
at com.adobe.AdobeDocumentServicesEJB.processRequest(AdobeDocumentServicesEJB.java:130)
at com.adobe.AdobeDocumentServicesEJB.rpData(AdobeDocumentServicesEJB.java:108)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120)
at sun.reflect.GeneratedMethodAccessor276.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.io.FileNotFoundException: Destination exception while retrieving destination
at com.adobe.ads.util.FileUtils.getURLStream(FileUtils.java:452)
at com.adobe.ads.util.FileUtils.getPDFDataFromURL(FileUtils.java:572)
at com.adobe.ads.util.FileUtils.getPDFDataFromInput(FileUtils.java:200)
... 33 more
Caused by: com.sap.security.core.server.destinations.api.DestinationException: [destination_0001] The properties for destination FP_ICF_DATA_DEV of type HTTP could not be located.
at com.sap.security.core.server.destinations.service.DestinationServiceImpl.getDestination(DestinationServiceImpl.java:166)
at sun.reflect.GeneratedMethodAccessor279.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.rmi_p4.reflect.LocalInvocationHandler.invokeInternal(LocalInvocationHandler.java:77)
at com.sap.engine.services.rmi_p4.reflect.AbstractInvocationHandler.invoke(AbstractInvocationHandler.java:53)
at $Proxy103.getDestination(Unknown Source)
at com.adobe.ads.util.FileUtils.getURLStream(FileUtils.java:444)
... 35 more
Caused by: com.sap.exception.io.SAPIOException: <Localization failed: ResourceBundle='com.sap.exception.io.IOResourceBundle', ID='No such destination FP_ICF_DATA_DEV of type HTTP exists ', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key No such destination FP_ICF_DATA_DEV of type HTTP exists
at com.sap.security.core.server.destinations.io.ConfigurationManagerStorage.get(ConfigurationManagerStorage.java:123)
at com.sap.security.core.server.destinations.service.DestinationServiceImpl.getDestination(DestinationServiceImpl.java:136)
... 42 more
Merging log data with log.pdf
Merge result: Success with information
Successfully merged data into dataless log.pdf.
Action: Render Error Log
Saved input stream, size: 18877 to temporary file: /var/tmp/adobewa_DEV_19732350/DM-6148188065651030618.dir/DM-8202457197062434482.tmp
Saved input stream, size: 1077 to temporary file: /var/tmp/adobewa_DEV_19732350/DM-6148188065651030618.dir/DM9000379241336545535.tmp
Embedding file/stream: pdfDocument.xml using ID: pdf doc MimeType: Description: Document Services Control Stream into PDF: /var/tmp/adobewa_DEV_19732350/DM-6148188065651030618.dir/DM6587752938953647532.tmp
Instantiate PDFMM CORBA connection execution time = 27 ms.
Error embedding request inputs in error log.:
java.lang.NullPointerException
Saved input stream, size: 7601 to temporary file: /var/tmp/adobewa_DEV_19732350/DM-6148188065651030618.dir/DM-5415419749347233973.tmp
Embedding file/stream: trace.txt using ID: trace string MimeType: Description: Document Services Trace into PDF: /var/tmp/adobewa_DEV_19732350/DM-6148188065651030618.dir/DM6587752938953647532.tmp
Adding file:/var/tmp/adobewa_DEV_19732350/DM-6148188065651030618.dir/DM1133995506666286675.tmp to workstreams as: error.pdf
Saved output file: /var/tmp/adobewa_DEV_19732350/DM-6148188065651030618.dir/DM1133995506666286675.tmp to stream: error.pdf
Processing exception during a "Render" operation.
Request start time: Tue Oct 24 11:52:49 GMT+04:00 2006
com.adobe.ProcessingError: No output was generated while rendering
The render error log file has been written to /usr/sap/DEV/SYS/global//AdobeDocumentServices/renderErrorLog/errorFiles/2006.10.24.115250SAFPMAHESHB.pdf.
Please validate the input files or streams attached with it and try again
Exception Stack Trace:
com.adobe.ProcessingError: No output was generated while rendering
The render error log file has been written to /usr/sap/DEV/SYS/global//AdobeDocumentServices/renderErrorLog/errorFiles/2006.10.24.115250SAFPMAHESHB.pdf.
Please validate the input files or streams attached with it and try again
at com.adobe.ads.request.RenderErrorLog.writeErrorPDF(RenderErrorLog.java:216)
at com.adobe.AdobeDocumentServicesWorker.processRenderLog(AdobeDocumentServicesWorker.java:1300)
at com.adobe.AdobeDocumentServicesWorker.processRender(AdobeDocumentServicesWorker.java:1168)
at com.adobe.AdobeDocumentServicesWorker.execute(AdobeDocumentServicesWorker.java:598)
at com.adobe.AdobeDocumentServicesEJB.processRequest(AdobeDocumentServicesEJB.java:130)
at com.adobe.AdobeDocumentServicesEJB.rpData(AdobeDocumentServicesEJB.java:108)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120)
at sun.reflect.GeneratedMethodAccessor276.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Help me on this......The problem was resolved by copying from our other system running the ADS the missing folders. If you check under the global directory you will see the subfolder as described in my last post so if a system identifier is DEV it would be drive usr\sap\DEV\sys\global\AdobeDocumentServices\
then under the AdobeDocumentServices folder there needs to be the folder for XMLFormService otherwise when starting and testing it will not find the XDP files it requires. I did not end up filing the call as this resolved the problem
Other folders you should have are;
Licensesupportservice
RenderErrorlog
TrustManagerService
DataManagerService
and others.
I believe there must be a support package that is not cumulative as we did the install then added the Java support package for ADS and several of the mentioned folders influding the XMLFormService and the RenderErrorlog were not there
Hope this helps
Maybe you are looking for
-
As the title says. Please, help me, I'm a little worried. Is it possible that I have somehow bricked my iPod? EDIT: My iTunes is not up to date, I updated it last the week iOS 5 came out, it tells me that there's a new update. Could I need this updat
-
Does LR at any stage save an edited copy of a picture in the library taking up extra disk space when applying changes (like iPhoto does) or does it always just reference the original file and apply the set of editing instructions to it, not taking up
-
Regarding to stock in the plant.
I maintained stock in the plant i.e. Unrestricted stock Having batch number . while doing the delivary the system showing "only 0 kg of the material is avilable.( i maintained the batch number in the delivary note also)". may i know what are the sett
-
Tracking Deletion in Sales Order -
Dear All, I want to keep track for all the Sales Order Material No. Deleted. I get the details from CDHDR and CDPOS tables for Insert, Update and Delete. I could not get the Material No. Which is deleted. Can you please help me out in this topic. Kin
-
Hi All, Is there some way to avoid adding the uncompressed file length to the SWF header? (the 4 byte integer after the 3 byte signature and the 1 byte version number) Can I write some default value instead of the exact one? Any help would be highly