ADS Installation on Netweaver 2004s

Hello,
I managed to download the 51032260_11.zip from service.sap.com and configuration guide. Whats the other zip file I need to download ?.
Can somebody point me to ADS installation Guide on 2004s also.
Thanks.
Sunita.

Hi Dezso,
thanks for reply. I havent started the configuration yet. What do u mean by "part of standard installation"?. We have J2EE Engine installed. I dont even have installation guide. Could you please guide on where to start?. One more thing I have downloaded adobe credentials file for 2004, can I use it for 2004s also?.
Thanks,
Sunita

Similar Messages

Error while creating database instance in installation of Netweaver 2004s

Error in Installation-SAP Netweaver 2004s on AIX 5.3 usingMaxDB as database
I have pasted error log below.
Please Help.
ERROR 2007-03-09 13:48:53
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2007-03-09 13:48:53
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2007-03-09 13:48:53
FCO-00011 The step sdb_init_instance_type with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|3|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_init_instance_type was executed with status ERROR .

Hi
Please help.
XCMDOUT.LOG shows the following things:
> Subprocess starts at 20070309134754
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134759
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134804
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134805
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134806
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134806
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134806
Execute Command : /sapdb/programs/bin/dbmcli -R /sapdb/IND/db dbm_version
Start subprocess as user with uid: root
> Subprocess stops at 20070309134807
OK
VERSION = 7.6.00
BUILD = DBMServer 7.6.00 Build 035-123-139-084
OS = UNIX
INSTROOT = /sapdb/IND/db
LOGON = True
CODE = ASCII
SWAP = normal
UNICODE = (unknown)
INSTANCE = (unknown)
SYSNAME = AIX
> Subprocess starts at 20070309134807
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134808
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134827
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134828
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134833
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134836
OK
IND /sapdb/IND/db 7.6.00.35 fast running
IND /sapdb/IND/db 7.6.00.35 quick offline
IND /sapdb/IND/db 7.6.00.35 slow offline
IND /sapdb/IND/db 7.6.00.35 test offline
> Subprocess starts at 20070309134842
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 -d IND -u CONTROL,********
Start subprocess as user with uid: root
Execute Session Command : param_startsession
Execute Session Command : param_init OLTP
> Subprocess stops at 20070309134853
OK
ERR
-24976,ERR_PARAMEXIST: param file of database already exists

Installation Error (Netweaver 2004s ABAP Trial)

Hi all!
I can't install the ABAP trial version of NetWeaver 2004's. Every time the installation stops at 30-40%. Before each installation i am running the regclean Tool, because i've read in one thread that this error could be caused by registry entries of a previous installation. But after that the error still appears. If someone can help me on that, i will be glad.
My operation system is Windows XP (Media Center Edition / Version 2002) SP2 and i've configured a MS Loopback Adapter.
Here's what the log.txt says:
(Apr 28, 2007 5:13:47 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Apr 28, 2007 5:13:47 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/ich/LOKALE1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/ich/LOKALE1/Temp/MaxDBSAPNWPREV.log")
Here's what the MaxDBSAPNWPREV.log (a cutout) says:
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: starting installation phase of package SQLDBC 76 7.6.00.36 32 bit
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: -
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst:
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SQLDBC76.TGZ"
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-11-21 01:13:02 pgm/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: -rwxr-xr-x      1073152 2006-11-21 00:02:25 pgm/libSQLDBC76.dll
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-11-21 01:13:02 sdk/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-11-21 01:13:02 sdk/sqldbc/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-11-21 01:13:02 sdk/sqldbc/lib/
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: -rw-rr        80738 2006-11-21 00:02:25 sdk/sqldbc/lib/libSQLDBC76.lib
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-11-21 01:13:02 symbols/
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: -rw-rr      3951616 2006-11-21 00:02:25 symbols/libSQLDBC76.pdb
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: checking unpacked archive... ok
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: installation of MaxDB Software finished successfully Sa, Apr 28, 2007 at 17:13:46
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: creating database NSP...
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: installation exited abnormally at Sa, Apr 28, 2007 at 17:13:46
Sat Apr 28 17:13:47 CEST 2007 MaxDB: Error during call to sdbinst, rc= 1
Sat Apr 28 17:13:47 CEST 2007 MaxDB: Done with call_sdbinst
Sat Apr 28 17:13:47 CEST 2007 MaxDB: rc of sdbinst = 1
Sat Apr 28 17:13:48 CEST 2007 MaxDB: Start of CallSdbuninst
Sat Apr 28 17:13:48 CEST 2007 MaxDB: IndepProgPath: c:/sapdb/programs
Sat Apr 28 17:13:48 CEST 2007 MaxDB: dbmcli path: c:/sapdb/programs/pgm/dbmcli.exe
Sat Apr 28 17:13:48 CEST 2007 MaxDB: Calling check for db_enum in case of an abort
Sat Apr 28 17:13:48 CEST 2007 MaxDB: nsp doesn't exist. Nothing to do !
Sat Apr 28 17:13:48 CEST 2007 MaxDB: rc of Method: 3
Sat Apr 28 17:13:48 CEST 2007 MaxDB: IndepProgPath = c:/sapdb/programs
MaxDB: dbmcli_path = c:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Sat Apr 28 17:13:48 CEST 2007 MaxDB: End of CallSdbuninst
Sat Apr 28 17:13:48 CEST 2007 MaxDB: End of uninstallation
Thanks

Hello all
a.) my hard disk is of type NTFS
b.) Second: this is the error log:
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: starting preparing phase of package SQLDBC 76 7.6.00.36 32 bit
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: -
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst:
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: same package already installed
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: checking consistence of package data in install registry...
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: check files... ok
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: skipping package
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, May 29, 2007 at 21:21:06
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: creating database NSP...
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:sapdbNSP\_tempLocationloadload_datasave' failed:
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: File not found: C:sapdbNSP\_tempLocationloadload_datasave
Therefore it seems to be exactly the same as mentioned in this Thread
c.) Before I installed the ABAP trial Netweaver SP11 version I used the SP8 version sucessfully which has been available since I believe December using the same hard ware equipment. I was able to install the former version (with same problems) on the same hard disk using the same operating system (by the way Windows XP SP2)
d.) Somebody asked there to find the downloads: general take a look at
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
e.) I have "surfed" a little bit in the internet and it seems to be that this error is well known but the solution proposed (matter of size of hard disk drive or matter of fact of size of memory installed) seems to be incorrect
The some problem has been discribed here:
http://www.sapfans.com/forums/viewtopic.php?=&p=791329
http://www.mundosap.com/foro/printthread.php?t=5177&page=2&pp=10
NW2004s ABAP Trial Version   error code = 601
Up to know I found no suitable solution to get rid of the problem as I have really (in my opinion) a suitable hardware (big hard disk; 1 GB RAM etc.)
Christoph
PS: I am still a novice in using the techniques in the threads (questioning; giving points; replaying etc.) used herein. So sorry for that If my usage might be incorrect or not perfect or.. .

Sapinst login timeout during installation of NetWeaver 2004s

Hello,
I want to install a new NetWeaver 2004s system using sapinst.
The Gui starts but after some seconds the connection breaks with the following error.
Starting GuiServer using:
/opt/IBMJava2-amd64-142/bin/java -cp /usr/sap/put/Install_/sapinst_exe.1789.1199282891/JAR/instgui.jar:/usr/sap/put/Install/sapinst_exe.1789.1199282891/JAR/inqmyxml.jar -Djava.security.egd=file:/dev/urandom SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool /usr/sap/stage/PORTAL/BS_2005_SR2_SAP_Installation_Master/IM_LINUX_X86_64/resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host , port 21200 to continue with the installation
guiengine: login in process.
guiengine: login timeout; the client was unable to establish a valid connection
I used an other port but I got the same error. The only thing which helps is a reboot of the server.
The operating system is LINUX.
Any ideas?
Thank you.
Best Regards
Ines

Hi Ines,
I think you're missing the DISPLAY environment variable.
set DISPLAY <IP_of_your_pc>:0.0
make sure your Xserver is up and running.
That should solve your problem
Regards
Juan

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Error occured during installation SAP Netweaver 2004s ABAP Trial Version

Hi,
during the installation an error occurred.
log.txt:
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I've run RegCleanTool and rerun the installer, result: the same error.
System specs:
Windows XP SP2
Hardware. AMD Athlon XP 3200+, 2,19 GHz, 1,25 GB Ram
The MS Loopback Adapter is correctly installed and ping on permanent IP adress 10.10.0.10 returns ok.
What's wrong?

Hello,
Try to install the MaxDB software manually, then continue with the installation of SAP Netweaver. Check whether there is any another entry of same SID into NSP? if yes then use any another SID for Netweaver system.
Best Regards,
Sachin

Problem in installation SAP Netweaver 2004s

Hi to all,
When I install SAP NetWeaver Developer Studio 7.0.09 appears the following error:
The SAP NetWeaver Developer Studio 7.0.09 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
Click Finish to exit the wizard. For detailed error descriptions, please open file://C:\ARCHIV1\SAPINS1\NW04S\SYSTEM\DEVSTU1\ide_sar.tmp\J2EE-R1\IDE\setup\saplogvw.exe .
The following program files could not be registered:
 c:\windows\system32\librfc32.dll
The installed applications may not function correctly until all program files are successfully installed.
Can I help me about this?
Thanks a lot.

Hi,
Do you have the admin rights on the system?
To register this dll you can use
Syntax
 REGSVR32 [/S] [/C] [/I:[Command_Line]] DLL_Name
 REGSVR32 [/S] [/C] /N /I:[Command_Line] DLL_Name
Key
 /u Unregister Server.
 /s Silent - no dialogue boxes.
 /c Console output.
 /n Don't call DllRegisterServer
 /i Call DllInstall (or DllUninstall if /u is specified)
Command_Line An optional command line for DllInstall
Ex:
REGSVR32 "c:\windows\system32\librfc32.dll"
Regards
Ayyapparaj

Netweaver 2004S Installation stops in phase 'Create Java Users'.

Hi,
We have an error in the installation of Netweaver 2004s on an Solaris X64 10 (64 bit). We have j2sdk1.4.2_13 (32 bit installed)
In phase 'Create Java Users' , we receive the following error in dev_UserCheck.clone :
'*** ERROR => DlLoadLib: dlopen()= ld.so.1: jlaunch:
fatal: /usr/j2se/jre/lib/i386/server/libjvm.so: wrong ELF class:
ELFCLASS32 -> DLENOACCESS (0,Error 0) [dlux_mt.c 314]
[Thr 4] *** ERROR => Can't load VM shared library (libjvm.so) (rc=-2)
[jhvmxx_mt.c 1576]'
I think this is an java error.
We can't find a download for the 64 supplementation package for solaris
X64. Is this supported?
Kind regards,
Serge Schelles

Hi Serge,
I'm no Solaris expert, but if I'm not mistaken, JRE and JDK versions for the X64 platform are only available as of version 1.5. It's worth a try, you can run them both at the same time on the same server. Just point your JAVA_HOME to the 1.5 directory after installation and start SAPinst again.
Good luck!
Henk.

Solution Manager can't generate installation key for Netweaver 2004s

I am trying to generate installation key for a new installation of
Netweaver 2004s or 7.0 and the Solution Manager only display SAP ECC
5.0 or 6.0 in the field production version, when i am trying do create
a new system landscape. My Solution Manager is 4.0 release and support
package 10. The keys generated by ECC 5.0 or 6.0 doesn't work.

That is because SAP has not released an ECC 7.0
NW2004s is also refered to as 7.0. It appears that you are confusing this with ECC 5.0 and ECC 6.0
A NW2004s installation can contain an ECC5.0 or ECC 6.0, just like it can contain a CRM 5.0 or SRM, or EP, et cetera
The generated keys probably do not work because you have wrong hostname or instance number entered.

Netweaver 2004S installation on Windows 2003 server : Oracle 10g Problem

Hi Friends,
I am installing the SAP Netweaver 2004s on a server which has Windows 2003 server Operating system on it.
It has got 6GB RAM and has, 5gb of free space in C drive, H: drive has 70 gb and I: drive has 50 GB of free space in it.
I am running Pre_requiste checker tool to check my hardware & software requirements in order to go ahead with installation, as a part of SAPInst.exe execution.
The results of Prerequisite checker tool are satisfied except for one " SWAP SPACE VALUES"
I am getting the message as follows
"The Minimum SWAP SPACE values required is 10994MB and currently you have 5993MB"
How to increase this SWAP space value? Please let me know the procedure.
Currently my server has a paging file details as below : Min size : 2MB & Max size : 9214MB allocated on C: drive. No other drive has paging file allocation.
What effect will I have if i proceed without meeting this requirement??
Suitable answers will be rewarded.
Thanks
Diwakar

OPen windows explorer and right click my computer
Select Properties
Click Advanced Tab
Click Settings (performance)
Select Advanced Tab
In virtual memory - click change.
Increase swap space/page file here.

NetWeaver 2004s installation problem on Suse Linux

Hi,
I downloaded NetWeaver 2004s 90 days version from SDN and installed on Suse linux. I am not able to execute command to get the license after installation. Here is the line I executed
add user n4sadm
unpacking adm_env.tar.bz2
Changing password for n4sadm.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sdb
Changing password for sdb.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sqdn4s
unpacking sqd_env.tar.bz2
Changing password for sqdn4s.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_I.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_II.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_III.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPN4S.tar.bz2
Service visinet-gui on port 3601/tcp was deactivated...
Service cpq-tasksmart on port 3201/tcp was deactivated...
Service netxms-mgmt on port 4701/tcp was deactivated...
Service iwec on port 4801/tcp was deactivated...
Service tick-port on port 3200/tcp was deactivated...
Service netxms-agent on port 4700/tcp was deactivated...
Service iims on port 4800/tcp was deactivated...
Update the necessary information in sysctl.conf:
kernel.shmmax = 23136829430
kernel.shmall = 5242880
kernel.msgmni = 1024
fs.file-max = 32768
kernel.sem = 1250 256000 100 1024
Found interface: eth0 . Alias is eth0:0
ifconfig eth0:0 192.168.155.1 up
Ok
n4shost:n4sadm 35> /usr/sap/N4S/SYS/exe/run/saplicense -get
/usr/sap/N4S/SYS/exe/run/saplicense: Exec format error. Binary file not executable.
Can any one help me to complete the installation and execute the server successfully. I am very new to linux. Do i need to execute any other commands to complete my installation.

Dear Rajasekhar,
this error simply comes, because the architecture of your computer is not the same as the one from the test drive. As I'm not sure, which architecture the N4S test drive uses, we simply have one of the following situations here. Either
your machine is x86_64 and the N4S is i386 or
your machine is i386 and the N4S is x86_64.
Please check!
Thanks,
Hannes

Netweaver 2004s installation problem on Windows: Oracle 10G

Hi Friends,
I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it.
The server has 6GB RAM and has 5GB of free space on C: and a free sapce of 60GB on H: & 50GB on I: respectively.The database that is to be used is Oracle 10g.
Do I need to install first SAP solution manger 4.0 on this or Can i proceed with Netweaver 2004 S installation???
I am installing a central system.
First I tried installing SAP solution manger 4.0 on this system and it went successfully. Now when i am installing Netweaver 2004s on the same machine, during installation I am asked whether to "install a MCOD or create a new database for this installation".
I chose Install MCOD and proceeded further with Installation. But my installation is taking a lot of time while executing the service :"Creating database schema". The message which i get on status bar is " Removing schema user SAPSR3" and the status remains the same.
Have any of you faced this problem ? Please let me know how you have proceeded further.
Before starting the installation one of the prerequisites " SWAP SPACE VALUES" for installation was not satisfied by my system and even then i proceeded with the installation.
Is it because of this SWAP space problem , my intsallation is strcuk?? or what could be the reason fo this?
Thanks
Diwakar

Hello Diwakar,
If you are just installing NW2004s then it is not mandatory to install Solution manager.
To increase the swap space --
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change
you canIncrease swap space/page file here.
Do not install the system as MCOD, make the seperate database.
Do revert for further doubt.
Best Regards,
Sachin.

SAP NetWeaver 2004s Java Trial Version Installation error

Dear Techies,
I tried to install the trial version (SAP NetWeaver 2004s Java Trial Version
) downloaded from SDN, but I am getting an error immediately after started the installation. The log as given below.
Please suggest me where I can delete this special character mentioned in the log file ? The full log also is given below
INFO       2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR      2007-04-13 21:55:17 [syxxcpath.cpp:58]
           CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR      2007-04-13 21:55:17 [syxxcpath.cpp:519]
           CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
Thanks and best regards,
Shiju
Full log :
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\Program Files\Java\j2re1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\instgui.jar;C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool C:\Netweaver_FullKit\SAPNW2004sJavaSP9_Trial\SAPNW2004sJavaSP9_Trial\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host MythiliKannan, port 21200 to continue with the installation
guiengine: login in process.
IRunModeReceiver CChoiceDialogModifier::continuePreviousRun()
INFO       2007-04-13 21:55:09 [synxcfile.cpp:493]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml'.
INFO       2007-04-13 21:55:09 [synxcfile.cpp:493]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml'.
INFO       2007-04-13 21:55:09
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO       2007-04-13 21:55:16 [synxcfile.cpp:493]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml'.
INFO       2007-04-13 21:55:16
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO       2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR      2007-04-13 21:55:17 [syxxcpath.cpp:58]
           CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR      2007-04-13 21:55:17 [syxxcpath.cpp:519]
           CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
ERROR      2007-04-13 21:55:17
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: Bad path component: "C:.
ERROR      2007-04-13 21:55:17
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO       2007-04-13 22:00:30 [iaxxgenimp.cpp:787]
           showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
Exit status of child: 1

Hi,
I changed the system name but still I am getting the same error. Previously there was an SAP system was installed in my pc later I uninstalled that, but still there are two SAPsid_00 and SAPsid_01 (where in sid is MS) is running. I think this is the problem. I disabled the services as well but still I am getting the same error during the installation. How to delete the windows services ? and how to do a clean up for registry ?. I feel if I do theses two then I can install.
Thans a lot for your helps and support.
Shiju

How to install BI content on a new Netweaver 2004s SR1 installation

HI Friends,
I have installed new NetWeaver 2004s SR1 on Windows 2003 server :oracle 10g as a central system.The installation was succesfull.
How to install the BI content addon in the system?(not installing business content objects). Please let me know if you have any guidance for installing the BI content.
Thanks
mv_d

im also facing the same problem. you got it solved? please do help me [email protected]

Error during installation of SAP NetWeaver 2004s Abap Trial Version

The following error occurred during installation of SAP NetWeaver 2004s ABAP Trial Version:
ERROR 2008-03-13 09:47:27
FSL-00001 System call failed. Error 53 (Network path not found.) in execution of system call 'CreateFile' with parameter (
127.0.0.1\sapmnt\trans\bin\DOMAIN.CFG, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, CREATE_NEW, FILE_ATTRIBUTE_NORMAL, NULL), line (763) in file (synxcpath.cpp).
This error occurred at the end of the installation.
Any idea?
Thank's, Thiago.

>
Thiago Amaral wrote:
> Ps: I already restarted my notebook.
That does not automatically start your instance. Have a look at the shortcuts SAP installed in your startmenu. There's both a startscript and a stopscript.

ADS Installation on Netweaver 2004s

Similar Messages

Maybe you are looking for