ADS with af:poll component does not reliably deliver DB change events

I took the Steve M's sample #156 (http://blogs.oracle.com/smuenchadf/examples) as mentioned in an earlier forum post (Re: ADF BC and the Active Data Service using af:table and modified it to use an af:activeOutputText instead of the adf:table to display the output as a result of database modifications.
As long as I open 5 or less tabs/browser windows (combination of IE and Firefox Mozilla) with my sample application, I can see the database changes being actively delivered to each of the browser/tabs correctly. However, when I open more than 5 browser/tab windows for my application and make a database change, then most of the times the active event does not seem to be delivered to any of the browser/tab windows and the af:activeOutput text field is not updated with the latest database change. At this stage, the database change active event is not just delayed it just does not seem to fire, the only way at this stage to get the database change to show up is to open another browser tab/window. When you do that, then not only the newly opened tab/window get the latest database change but also the tabs/windows that had been opened earlier suddenly receive the database change that they had not received before the new tab/window was opened. It almost looks like the tabs/windows had received the database change event but it was queued up and for some reason was not able to refresh the browser/tab window.
I am working off an ADE application view that has the underlying FMWTOOLS_MAIN_GENERIC_110116.1002 label. Is this a known issue and if so when can a fix be expected for this? If you need my application, I can zip it up though I believe I was getting similar behavior even with Steve's original sample 156 for more than 5 browser/tab windows.

Hi,
if I am correct, then you are from Oracle and should use internal forums or mailing lists.
Frank

Similar Messages

  • Software Component does not support selected Development Component Type...

    Hi,
    I have a problem, i want create a new project of Mobile Service Component, but, when i want select MyComponents [demo.sap.com], in the top appear:
    "Software Component does not support selected Development Component Type. Required DCs are located in an SC that is not visible from the selected SC "
    Why?
    Thanks in advance,
    Regards,

    Hi Victor,
    the issue is that the archive pool in your NWDS is not set up properly. Could you check the configuration of the development configuration? I guess you are developing in Local Development, right? Please check in the "Component Browser" that the two Software Components "NWMCLIENT" and "XOCA" are present and contain some DCs inside them. If this is not true, than something went wrong with your setup of the IDE. The modifications of the default.confdef are most likely not right.
    Please come back to me if you don´t know how to proceed.
    Regards,
    Stefan

  • Automatic Selected Item of List Builder Component Does not work (anymore)

    Hi all,
    Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
    Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
    This are my settings of the list builder component (which was running correctly earlier..):
    -at the general tab I defined a range of labels
    -at the general tab I defined 2 data column insertion series
    -at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
    -all of the data comes from an external xml data source
    You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
    I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
    Greetings Erik-Jan Vriens

    Hi njnits,
    Print view button is a standard component of Xcelsius: look at it in the IDE
    Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
    All visualisations, not only the table,  in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
    The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
    Hopes this info helps....

  • ERROR: Web Dynpro component does not exist

    Hi!
    Trying to open different menu items in PPM I get browser with error:
    500 SAP Internal Server Error
    ERROR: Web Dynpro component does not exist (termination: RABAX_STATE).
    Url looks like: someurl.com:8010/sap/bc/webdynpro/sap/inm_workcenter_app?IV_APPL_TYPE=RPM&IV_OBJ_TYPE_R=RPH&IV_POR…
    How can I fix it?

    Hi Maxim,
    Refer the SAP note in the below thread.
    ERROR: Web Dynpro component does not exist (termination: RABAX_STATE)
    Regards,
    Ravi

  • HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

    I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

    Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
    As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
    Did you use any third party software to move your Firefox data from internal memory to the storage card?

  • Hello  I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out?  thanks

    Hello  I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out?  thanks

    Refer below link once
    App doesn’t open | Progress wheel spins continually

  • Job Cancelled with an error "Data does not match the job def: Job terminat"

    Dear Friends,
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job   Started                                                                               
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)                           
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.                                   
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.                                    
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)  
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)    
    8.Job cancelled after system exception
    ERROR_MESSAGE                                                
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised. 
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?
    Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

    Dear Friends,
    _Urgent : Please work on this ASAP _
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job Started
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
    8.Job cancelled after system exception
    ERROR_MESSAGE
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?

  • Create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain

    I have a script that needs to be modified to create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain.  Here is the script, need help at bottom
    =======================================================
    Set objShell = CreateObject("WScript.Shell")
    objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
     IF Right(objComputer,3) = "000" Then
    Else
     strShortcut = objShell.SpecialFolders( "Desktop" )  & "\%username% Share.lnk"
      strShortcut = objShell.ExpandEnvironmentStrings(strShortcut)
    Set objLink = objShell.CreateShortcut( strShortcut )
     objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
      objServer=Left(objComputer,7) & "-000"
     objLink.Description = objShell.ExpandEnvironmentStrings("%username% Share")
      objLink.TargetPath = objShell.ExpandEnvironmentStrings("\\" & objServer & "\Users\%username%\Desktop\%username% Share")
      objLink.Save
    End If
    =======================================================
    if "C:\Users\%username%\desktop\%username% Share" exits do nothing
    if not create the folder and share it with everyone read only
    ======================================================
    The section directly above is what I need to add, anyone have a clue how to make this work?

    Bill:  Can you suggest a site?  I am in the weeds here trying to get this done yesterday.  I have been reading code and trying to figure this out since yesterday morning.  I have to roll out this image to 2 dozen machines and
    this is holding us back.  Any idea which site I can post to for help?
    The bigger issue is that you have been given the answer to this in many different forms and, because you have no technical background, you fail to see what is being shown to you.  That is why I have repeatedly suggested that you hire a consultant.
    The link to the learning material is at the top o this page.  You can also search the web for Windows consultants.
    In the learning link you can also look up how to manage files. If, in the beginning you had chosen to use the learning materials you might not be in this bind.
    Look up and research the FileSystemObject.
    ¯\_(ツ)_/¯

  • When I open my MacBook Air the keyboard comes up along with the screen and does not stay still?!

    When I open my MacBook Air the keyboard comes up along with the screen and does not stay still. So I need to hold down the keyboard while i open it. Other than that it works fine despite the fact that the fan noise some times is loud and sometimes it's getting warm at the base. I wonder if this can be fixed if i go to one of the apple branches.

    Yes. Take the computer to the Apple store to have it fixed.
    Best

  • Syncronizing my 3gs with itunes the sync does not finish because itunes allways crash and stuck i made some troubleshoots like reinstall again but nothing and my itunes is update and the system is windows vista home premium.Please help me...

    Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not  acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
    My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
    Please help me.

    I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
    You asked what I meant about saving the installer on your PC.
    When you go to the iTunes download page:
    http://www.apple.com/itunes/download/
    And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
    After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
    It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
    I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
    The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
    The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

  • Hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    Have you changed the system voice to an English one in system preferences?

  • Graphical mapping issue with useOneAsMany if segment does not exist

    Hi all
    I have an issue with graphical mapping in an IDoc to file scenario. I need to have header level fields mapped to line item fields. Whether or not and how many source header segments of the same type exist depends on a qualifier (QUALF). This is generally working if I use the following graphical mapping:
    if QUALF = 001 then <source>  ->  removeContext  ->  useOneAsMany  ->  splitByValue  ->  <target>
    ... with setting QUALF, <source>, and the second input for the useOneAsMany to the highest possible context node.
    Nevertheless, if the segment with the qualifier 001 does not exist in the source then the mapping throws the error "Too few values in first queue in fuction useOneAsMany". Whatever I've tried, the mapping wants to execute the useOneAsMany statement anyway and I haven't found a way to omit this. Whether the target would be created with an empty value or not created at all would be secondary. Would eventually somebody have a solution to this problem?
    Thanks in advance,
    Daniel

    Daniel,
    try using mapWithDefault function before useAsmany
    if QUALF = 001 then <source> -> removeContext -> <b>MapwithDefault</b>->useOneAsMany -> splitByValue -> <target>
    I think it takes care even if the value occur in the contaxt or.
    Babu

  • TS1292 How do I redeem a card with a code that does not work?  The support store takes me in circles?

    Help and support sends you in circles and does not help redeem a card with a code that does not work.

    Well, they have a website, but here is a link to their information about unlocking iPhones.
    http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=6d7EKuCF_dr
    You may not qualify for an unlock though.

  • TS3276 when I re-send an e-mail with an attachment it does not send the attachment just  the name of the file what can I do to have it re sent complete??? thanks

    Something happened to my laptop. I try to resend e-mails with files and just sends the email with the file name, does not send the file. what can I do to fix this??? thanks

    In Mail, go to:
    Edit > Attachments
    and check "Include original attachments in reply" in Mail's menu.

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

Maybe you are looking for

  • N8 camera button not working

    mmtoday my nokia n8 had problm↲its camera button had stopd working↲by presing camera button it only focuses the view but doesnt c5ick the photo↲↲plz help me em really scared↲my phn is in warranty wil nokia wil repair it for free

  • What exactly means java.lang.reflect.InvocationTargetException

    from java docs: InvocationTargetException is a checked exception that wraps an exception thrown by an invoked method or constructor.

  • Iwork or documents to go for iPad?

    Hello, I've been searching for applications that are able to open microsoft office documents such as word, excel and powerpoint in ipad. I have found the iwork pack for almost 30 dollars and documents to go for just 9.99 dollars. I was wondering whic

  • IPhone will not sync over wifi, iPod & iPad will

    I just got the iPhone 5s, and I can't seem to sync over wifi. I can sync with my iPad and iPod over wifi, so I think my network isn't the problem. Everytime I plug my iPhone in to my MacBook, the sync over wifi option box is not ticked, I tick it and

  • BBP_SC_UI_ITS  code

    Hi. I need source code BBP_SC_UI_ITS function groups and screen 120 's elemnet list. Can you send me this code and element list for SRM 6.0. My mail: [email protected] Thanks for your help. Best regards Message was edited by: fatih canca