ADSL Broadband with Secure private and Guest Open ...

Hi
Im thinking of signing up with BT for my business phone and broadband - not the cheapest (£55/month) but the one I feel comfortable with (for now).
I shall need to have a private wi-fi network for my business computers but also a public (possibly open) wi-fi network for client use.
Ive got a Home Hub 3 for my house but Im not overly impressed with it and dont know if that would give me what I need anyway?
So, can anyone suggest a GOOD router which will connect with BT ASDL line, and give me 1 secure private wi-fi channel (plus ethernet connection) and at least 1 (maybe more) open wi-fi channels ?
Im looking at upto £150 to spend on a piece of kit to do the job.
I believe there is also some software which will allow me to set a "welcome page" on the open network(s) as well ?
THANK YOU for any advice !

Welcome to the BT Residential Customers forum
You would be best asking for advice on the BT Business forums http://business.forums.bt.com/
as there are probably plenty of people with a similar arrangement.
Thanks
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Hello I have a problem with security questions and i cant reset to my email The error was   Exceeded Maximum Attempts We apologize, but we were unable to verify your account information with the answers you provided to our security questions. You have

Hello
I have a problem with security questions and i cant reset to my email
The error was
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here      for assistance.
i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
http://www.traidnt.net/vb/attachment...134863-333.jpg
can you help me please

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Can Airport Express extend the private and guest networks simultaneously?

Can the Airport Express be used to extend the private and guest WiFi networks coming from the base station simultaneously, or can it only be an extension for one of the two at a given time?
Joe

Can the Airport Express be used to extend the private and guest WiFi networks coming from the base station simultaneously
Yes, either by a wireless connection or Ethernet connection to the base station.....assuming that both the base station and extender are using firmware 7.6.3 or higher and AirPort Utility 6.3 is used to configure both AirPorts, which must be dual band models.

If my macbook's memory pressure goes red with just Safari and Word open, is it just a memory issue?

Hello all,
I'd really appreciate any input on this issue. I'm not especially expert with regard to computer systems and software, so I ask that you please bear with me; I'll try to provide the best information I can. What has been happening with my computer is that it has been freezing and crashing, even with only Safari and Microsoft Word open. More information about the system as well as what I've done so far is below.
I have a mid-2012 13-inch Macbook Pro with a 2.5 GHz Intel Core i5 processor, 4 GB 1600 MHz DDR3 memory (two 2 GB cards), and an Intel HD Graphics 4000 card. I am running I have approximately 280 gigs free on my 500 GB Apple HDD. I am running OS X 10.9.3 (13D65), Kernel version Darwin 13.2.0.
In March or April of this year, my computer started seriously slowing down and freezing and crashing. (I think that this was around the time I upgraded to Mavericks, but am not 100% positive.) Since it is my only computer and I'm a PhD student, it took me until May to seriously address the issue. I ran Apple hardware diagnostics and the disk utility (verified the disk; verified & repaired the permissions), and tried uninstalling programs I thought might be causing issues, but nothing improved. Since it didn't appear to be a hardware issue, I decided to do a clean install of Mavericks with a full software update [and didn't use a time machine backup like I'd done in the past; I only backed up files and bookmarks this time and installed new versions of all my programs]. Although my computer ran better for a few weeks, it started slowing down again, and lately has been crashing on a near-daily basis.
After reading through the fora, I re-ran disk utility (disks check out fine; one permission -- for Safari -- seems to refuse to be repaired), re-ran Apple Hardware test twice (no issues found), and have been running the Activity Monitor [I put it in my dock with the bars showing CPU usage]. Today, when my computer started seriously slowing while I had only two programs open (Safari & Microsoft Word), the Activity Monitor icon on the dock showed all four bars at max.
I managed to get a few screencaps of the Activity Monitor:
So, this suggests to me that either (a) I have insufficient RAM to run Mavericks and run basic computer programs, or (b) there is some other issue.
Do you all have any recommendations as to the best way to proceed? I don't have a lot of cash, so I can't really spend money unless it is really warranted. Would it be worth running OnyX first? Or is this a pretty clear indication that I need new RAM? Alternately, are there any other issues that seem likely (an undetected hard drive problem, etc.)?
Thank you!

Hi Melophage,
Thank you. Although it is possible something was running in the background, in Force Quit, the only applications visible were Finder, Microsoft Word, and Safari.
I ran Etrecheck and have included the output here:
EtreCheck version: 1.9.12 (48)
Report generated July 25, 2014 at 2:17:04 PM EDT
Hardware Information:
    MacBook Pro (13-inch, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2 cores
    4 GB RAM
Video Information:
    Intel HD Graphics 4000 - VRAM: (null)
        Color LCD 1280 x 800
System Software:
    OS X 10.9.3 (13D65) - Uptime: 1 day 2:16:0
Disk Information:
    APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 399.25 GB (220.13 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
        BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 100 GB (58.85 GB free)
    HL-DT-ST DVDRW GS31N
USB Information:
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information:
    Apple Inc. thunderbolt_bus
Gatekeeper:
    Mac App Store and identified developers
Kernel Extensions:
    [not loaded]    com.millisecond.driver.InquisitParallelPort (2285 - SDK 10.8) Support
    [not loaded]    edu.sissa.iokit.ioLabResponseBox (2.0 - SDK 10.6) Support
Problem System Launch Daemons:
    [failed]    com.apple.installd.plist
    [failed]    com.apple.wdhelper.plist
Launch Daemons:
    [loaded]    com.adobe.fpsaud.plist Support
    [running]    com.daz3d.content_management_service.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
    [loaded]    net.cloudpath.HelperTool.plist Support
Launch Agents:
    [loaded]    com.google.keystone.agent.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
User Login Items:
    iTunesHelper
    RescueTime
    Dropbox
    Activity Monitor
Internet Plug-ins:
    FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
    Default Browser: Version: 537 - SDK 10.9
    Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    o1dbrowserplugin: Version: 5.4.2.18903 Support
    SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
    googletalkbrowserplugin: Version: 5.4.2.18903 Support
    Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
    MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
    JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions:
    Ebates: Version: 3.0.2.5
    Save to Pocket: Version: 1.9.1
    PriceBlink: Version: 4.1
    Evernote Web Clipper: Version: 6.1.3
    Hukkster: Version: 1.1
    Add To Amazon Wish List: Version: 1.8
    Instapaper: Version: 1.2.1
    Coupons at Checkout: Version: 1.1
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
    Flash Player Support
    Java Support
Time Machine:
    Time Machine not configured!
Top Processes by CPU:
        23%    firefox
         4%    WindowServer
         0%    fontd
         0%    Activity Monitor
         0%    sysmond
Top Processes by Memory:
    818 MB    firefox
    111 MB    com.apple.IconServicesAgent
    102 MB    Finder
    98 MB    Microsoft Word
    94 MB    mds_stores
Virtual Memory Information:
    311 MB    Free RAM
    1.49 GB    Active RAM
    1.22 GB    Inactive RAM
    895 MB    Wired RAM
    3.49 GB    Page-ins
    159 MB    Page-outs
[Looking at the output, I would like to point out that Daz 3D is newer than the issues I've been having; I just recently installed it for a research project.]
Does anything stand out to you? Thanks!

How To: Setting up two WLANs (Private and Guest) - two distinct IP schemes.

WLC 2504 running software version 7.4.100.0.
Goal:
Private WLAN to allow access to internal network
Guest WLAN to allow access to web (in the DMZ)
We currently have the wifi-network running and is servicing web access only.
Any ideas on how best to go about this? There will be need to assign two different IPs to wireless clients depending on which WLAN they access.
Thanks.

Hello Daniel,
So in order to segregate traffic based on the WLAN they are connecting to, you will first need to establish/create dynamic interfaces on your controller which will be 'mapped' to a specific SSID(ie. Private or Guest):
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/consolidated/b_cg74_CONSOLIDATED_chapter_011111.html#ID594
If you already have the dynamic interfaces in place, you simply just create the WLAN under WLANs > Create New > Go. Once you apply, you will be sent to the 'General' section where you can apply the 'Interface' to the dynamic interface you created in which to put the client on.
Cheers,
Erwin
How helpful was I? Don't forget to rate me when you have the chance!

Help with security questions and wrong email

Hello apple support! Please help I did not set my security questions that MyAppleId say i have and the reset email is not mine help!

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
The people on these boards aren't either AppleCare or the Account Security team.
(98187)

How to extend secure network and guest network.

Sorry if this has been covered but I couldn't find it.
I have an Airport Extreme running the 7.6.3 firmware. Once Comcast gets their act together it will be running off a static IP. I want to wirelessly extend my guest WiFi and my secure WiFi. What do I need to get this done? Do I need to get an Express for each network? Or can another Extreme repeat both networks? Eventually I hope we will have Cat5 running to the repeater's location but that could be a long way off.
Thanks!

I cannot get the web page to open when I do a search on the SMC8014, but it appears that this is a modem/router or gateway type of device.....which will not allow the Guest Network feature to be enabled on the AirPort Extreme.
I did find this, which confirms that the SMC is a modem/router or gateway....not what you want.
http://www.speedguide.net/routers/smc-smc8014-biz-business-cable-gateway--534
The solution is to find out from SMC or your Internet Service Provider whether or not the 8014 can be configured to operate in "Bridge Mode".....which would then allow you to configure the AirPort Extreme to operate as the main router on the network. This would allow the Guest Network option on the AirPort Extreme to be enabled correctly.
Or better yet.....ask your ISP for a simple modem.......not a modem/router or gateway type of device.
So assuming this is all compatable (or I get compatable equipment), I can extend both networks with 1 express or 1 extreme?
That is correct.

Photoshop saved a PSD file with security permissions, and now I can't access it. Please help!

Using Photoshop CC, I saved a PSD file after several hours of editing. I also exported a TIF file from the PSD. After closing Photoshop, I cannot access either file in any way. I cannot even copy them.
going to properties --> security, I get a message that reads, "You must have Read permissions to view the properties of this object." Click Advanced to continue.
When I click Advanced, it says "Unable to display current owner", and in none of the three tabs available (Permissions, Auditing, or Effective Access) can I click "Continue" and get any further than the message, "You do not have permission to view or edit this object's permission settings".
Please help me. This is highly frustrating, and a bug that is costing me over an hour of my time troubleshooting.
Thank you.
UPDATE:
I rebooted, and the files are... gone. Photoshop CC has no record of the file under "Open Recent".
What just happened? I lost a good 2 hours of work and a unique photograph
UPDATE2
I restarted the project, saved a PSD with Maximize Compatibility selected. Verified this file has appropriate permissions.
When I then go to File --> Save (not "Save as", but "Save"), after progressing to 90% or so, an error message comes up, "Could not save 'O:\[path]\file.PSD' because the file name was not valid."
I click "OK", and then go to the original file and check its permissions. They are now changed to "You must have read permissions".

I have this exact problem too. Windows 8.1 CC 2014 and all of a sudden I get the problems AIJ23 has. Say I have 8 files open, I save the first 3 or four, just with Control-S (saving in PSD format) no problem, then all of a sudden on the next save I get a message saying I don't have permission to save over the file followed by the same problems as above. I use Save As so I don't loose my work but I cannot delete/rename/change permissions of the original file. This only started happening about 2-3 days ago and only happens in Photoshop. I haven't managed to find much about this issue anywhere.

Help setting up a private and guest network

If someone could help me out here it would be appreciated. Here's the deal. I have AT&T U-verse and a 2Wire modem (3801HGV). What I'm looking to do is set up a private wireless network (to access all our computers/NAS/etc) and a guest network (which only has access to the public internet...for guests/co-workers). Unfortunately, the AT&T router doesn't have a guest network feature. So, doing a little research, I decided to buy an Airport Extreme because of its guest network feature. Upon setting that up, the Airport Extreme asks me to go into bridge mode which automatically shuts off the guest network. I thought maybe I could use an Airport Express to setup an additional wireless network that DIDN'T have access to the private network but unfortunately, it sees all the private stuff (it also wants to be in bridge mode).
Can anyone think of a solution for this?

Yeah, I tried this but unfortunately it didn't work
Was there a particular error message that you received?
Or was it a case of the 2-Wire not wanting to see a Double NAT situation on the network?
I can make this work with an AirPort Express using another Apple router as the "main" router, but I don't have a 2-Wire to test things out. By "work", I mean that computers on the AirPort Express network cannot "see" any of the devices on the "main" network.
If you are interested, I'll provide some details on the setup of the AirPort Express for you.

ADSL Broadband With Time capsule

Hello could someone please help me?
I currently have ASDL Broadband using a netgear modem router that i want to remove and use the Time capsule, can this be done by pluging the phone line in or do i need to get a modem for the time capsule?
cheers steve

You can use either an Ethernet ADSL Modem or a combined ADSL Modem/Router.
The best option is an Ethernet modem such as the X-Modem or similar as the Time Capsule is already a router and it works well with things like iChat AV without any extra configuration.
Alternatively you could use virtually any ADSL Router and configure the Time Capsule as a bridge. The downside to this sort of set-up is rather than using the TC as a router you are having to use the ADSL router to do things like sharing and hand out DHCP addresses. This means you may have to make additional configuration settings on the router such as port forwarding or modifying firewall rules for things like iChat AV to work.
Either way will get you on-line with the TC.

Problem with window.close and window.open

I am having two suspected Actionscript problems which only seem to be happening with Flash player 9 and later.
BACKGROUND:
I have a client who needs browser-launched swf files to play from a CD-ROM (I do not want to use the Flash projector). These files were created a few years ago using Actionscript 1 & 2 code and everything has worked perfectly until now.
Here is the setup:
First, an autorun file on the root of the CD runs and writes a 'trust file' to the 'Macromed' directory. The autorun next launches 'index.htm' which is simply an html page containing a series of links (topic1.htm; topic2.htm; and so on). Next, let's assume the student clicks the 'topic1.htm' link from the 'index.htm' page. The 'topic1.htm' link launches a web page (also located on the CD) which contains and displays 'topic1.swf'. So far, everything works fine.
Here is where the two problems happen.
Problem 1:
I have an 'Exit' button within each swf (remember each swf is contained inside an html page). The 'Exit' button has always worked properly, but suddenly does not work in Flash player 9. I am using the following Actionscript 2 code on the 'Exit' button:
on (release) {
getURL("javascript:window.close()");
The 'Exit' button has always worked using this code (and still works in Flash player 8 and lower). However, it does nothing when played using Flash player 9.
Problem 2:
There are links to html popup windows within the 'topic1.swf' file (remember 'topic1.swf' is contained inside 'topic1.htm'). Each popup window contains a swf file that is used to present a demonstration. When the student clicks the 'demo1.htm' link from 'topic1.swf', an html popup window SHOULD load and display 'demo1.swf' inside the 'demo1.htm' window. The main ('topic1.htm') window stays open so that the student can return to the topic after completing the demo. This has always worked properly until Flash player 9. Here is the Actionscript 2 code
which I am using on the button inside 'topic1.swf' to launch 'demo1.htm':
on (release) {
getURL("javascript:launchWin2('webpage2.html');");
ADDITIONAL INFO:
'topic1.htm' contains the following code which is used to support the Actionscript code listed under 'Problem 2' above.
<SCRIPT LANGUAGE=JavaScript>

</SCRIPT>
I would appreciate any help anyone can offer. I am wondering if the problem has to do with a need to use ONLY Actionscript 3 code from Flash player 9 onwards.
Thanks!
Terry

You may have '''Switched ON Caret Browsing'''. press '''F7 (on Mac: fn + F7)''' to toggle '''Caret Browsing ON/OFF'''
* click '''Firefox''' button and click '''Options''' -> Advanced -> General -> remove
Checkmark from '''Always use the cursor keys to navigate within pages'''
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox
Check and tell if its working.

My iPhoto libraries have been made with older vs. and cannot open them with iPhoto application or Library Manager

I have multiple iPhoto libraries made with older vs. of iPhoto. I cannot open any now with either iPhoto or iPhoto Manager, just get a spinning icon.

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Problem with media encoder and re-opening projects

Dear all, I'm a newby and I'm having a very strange problem.
I've made my first premiere project and all seems ok in the preview. Then I've tried to exported it in avi using media encoder. This is a 1024x682 color movie, 25fps, duration about a minute. Avi export setting was xvid compression, and after a long wait (10 min) and nothing started, I've re-tried with divx. After some more time, media encoder blocked and I needed to put it down with windows task manager. Then I closed normally premiere.
After re-opening premiere I've selected the saved project, but it do not open and a message appear (in my language, so I'm trying to translate): "Impossible to open a sequence of the project. It was not possible to associate any sequence preview file or codec to this kind of sequence."
Moreover I've tried do create some other simple projects but none of them can be opened!
More info: Premiere pro CS4, Win XP sp3 32bit, PC AMD64 3200+, 3 GB ram.
Inside project: a couple of avi non compressed video and a couple of jpg still images. And some transitions and text. Background music. Very simple.
I hope you can let me know how to get back to my project, and also to export in avi. Help! Thanks!
Addition:
PS: maybe the codec error I attach can be the cause? How to solve?

Unfortunately, both Sherlock and G-Spot do not see the Adobe MainConcept CODEC's correctly. Adobe uses a naming convention, that they do not understand, but it's done to "hide" those CODEC's, so that other programs do not overwrite them.
Now, there have been reported instances, where a full-paid version of PrPro has "reverted" to the trial version. The trial version cannot do anything with regard to MPEG.
In those cases (do not know the causes), the fix has been to uninstall CS4, run the Adobe Clean Script CS4 several times, rebooting between each run, then installing CS4 again, then updating it. This has worked in every case, that I can recall.
What caused the full-paid versions to revert is a mystery to me, and I have yet to hear of the cause.
Sounds like your full-paid CS4 now thinks that it's the trial version. The steps above should get it fixed for you.
Good luck,
Hunt

ADSL Broadband with Secure private and Guest Open ...

Similar Messages

Maybe you are looking for