ADSL Filter Problems

Hi!
New to BT Broadband and not very technically minded. We have recently swopped from orange to BT as we were getting slow connections speeds and my sons live box 'lagged'. We have one BT Master socket (no extensions) and I need to plug in three items - BT Home hub(small plug), normal home phone (normal plug) and a device my husband uses for work (small plug). We call it a hand held (its a bit like the one the parcel delivery drivers use, which he has to connect everynight to upload his figures for work etc and I presume has an internal modem). So, I have fitted a standard double adapter into the master socket. Fitted a new filter into one and connected the home hub and home phone to that. Attached another filter and connected the hand held device to this. Now the hand held device can't get a dial tone. I tried several different ways to connect and have done a speed test in between. As set up above - I get a download speed achieved in test of 4304kbps and with the filters altered so that the hand held device can connect, I get 600kbps. The maximum I've been told my line can support is 5.5megs, so neither speed is very good really and it seems that how I have the handheld connected is the main culprit on the slow speed.
We get no interferrance on the home phone.
Firstly, can someone tell me if I have this connected wrong? Or is there an adapter that I can plug 3 devices into one being a normal home phone and two small plugs (preferably with a filter incorporated)
Our master socket is positioned high up above the kitchen cupboards so its not like we can just plug in and unplug the handheld everyday without climbing up on top of the kitchen units. (Don't ask why its up there!)

Sorry you lost me on data throughput..... I did say I wasn't very technically minded!
Unfortunately, after setting the devices up as described below our phone has no dial tone now. It may be the adapter so I will swop for another one before breaking down into tears.
We were with orange for years (originally wanadoo) and didn't receive any hard sell at all! In fact I would say we were left to fester. I did contact them lots of times and was sent emails on all things I should try at home first ie changing the filters, changing the channel, turning off all other applications on the computer - I've been through the lot!!
The chances of my husbands IT firm understanding what a usb adapter is let alone what 'osme' software is highly unlikely. We were going to go over to Virgin and he rang to check the hand held device was compatible. He was told not to bother as it didn't work properly on Virgin!
Would go through the process of unplugging everything else so he can T-com but it takes a little bit longer than a few minutes and the rest of the family are usually using the broadband connection for the internet and gaming at that time. Besides as I have said before the master socket is above a kitchen cupboard high up on a wall!!
As I asked previously, if we were told the line was capable of speeds of upto 5.5 megs. What sort of figures should the speed test report to indicate that this is what we get?
I have read a few of the other messages about slow speeds ie utube being literally impossible to watch and iplayer pausing every few minutes instead of playing continuously and thats what we get consistently.

Similar Messages

Since my ADSL filter replacement.....................

Last week I reported trouble with my telephone ringing tone disappearing etc. and found that this was due to a rogue ADSL filter on one of my three phones. A new filter, on Saturday cured the problem but since then or is it holiday traffic, my BB speed has dropped from a steady 15/16 Mbps to about 11/12 Mbps. During the analysis of the problem the BB was turned on and off quite a few times and I did some resets and so was wondering whether this could be the cause of the drop.
Should I wait for a few days or check all my push fit connectors which mean BB interruption again on the line?

just as I expected all the resets have increased your noise margin from normal 6db ( or maybe 3db) to 13.1db with a corresponding drop in connection speed.
you still have a lot of errors for 1+ day connected is quiet line test quiet?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Alv grid filter problem

Hi all,
I have a problem when filtering data in alv (I use REUSE_ALV_GRID_DISPLAY FM). The problem is that data is truncated in the matchcode of the filter.
I've seen several threads talking about this, but was not able to find the right solution for me... a lot of notes, and I think I shouldn't have to install all of them.. should I?
I followed this thread
ALV filter problem
but do not know the note installed by the asker in the end...
Could anybody help me?
Best Regards

Hi,
Please apply OSS note 898852.
Regards,
Bharadwaj

ADSL Filter Master Socket Configuration

I recently installed my Home Hub 4 incorrectly by connecting an ADSL filter to a BT Master Socket which did not require it. As a result I had an amber light and no connection and an unnecessary engineer visit. I cant see on the packaging ("4 easy steps") or manual where it tells me to not fit the ADSL filter in this instance. Did I miss this somewhere else?

Had look online at instructions and all can see js the socket shown was a standard socket and your socket had 2 outlets which was different
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Table filter problem

Hi expert ,
I have the problem on filter , which means
while there is no entry on the table , if click enter the filter action it shows runtim errors like that
Note
The following error text was processed in the system RD1 : Value 1 is not a valid index; context node: COMPONENTCONTROLLER.1.BBU_ITEMS
The error occurred on the application server BLR-RDEV-RD1_RD1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_ATTRIBUTE_PROPS_FOR_NODE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: IF_WD_CONTEXT_NODE~GET_ATTRIBUTE_PROPS_FOR_NODE of program CL_WDR_CONTEXT_NODE_MAP=======CP
Method: GET_NODE_STATE of program CL_WDR_TABLE_METHOD_HNDL======CP
Method: IF_WD_TABLE_METHOD_HNDL~APPLY_FILTER of program CL_WDR_TABLE_METHOD_HNDL======CP
Method: ONACTIONBBU_FILTER of program /1BCWDY/EAIL5PBJSQ5EPLFELLCZ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/EAIL5PBJSQ5EPLFELLCZ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
What should i do avoiding this one can anyone let me know about this problem ?
Thanks in advance
Sankar.M

Hi Sankar,
Do you mean to say like you get a dump when you enter some value in the filter field & press on enter while there is no data in the table?
If yes then give it a try in this manner. I haven't tried it out myself but its just a guess. You would have created an event handler for the FILTER event of your table. Say suppose your action handler method is ONACTIONON_FILTER then within this method you would be saying something like:
METHOD onactionon_filter .
" TABLE_CONTROL is TYPE REF TO IF_WD_TABLE_METHOD_HNDL
" Within WDDOMODIFYVIEW I obtain & save the reference of my table into TABLE_CONTROL
wd_this->table_control->apply_filter( ).
ENDMETHOD.
So instead of directly calling the apply_filter method first try to obtain the data being displayed in the table by using get_static_attributes_table method. Then check if the table is initial & call the apply_filter method only if the table is having some data.
Regards,
Uday

Filter problem with operating system in french

Hello,
There is a problem with the "Operating System - Windows" filter in the french version of ZCC.
If you create a bundle and go into "Requirements" and add a filter with Operating system and you set it to "Version 6.1 - Windows 7 / Windows Server 2008 R2" you get this error
"Vos modifications ne peuvent pas tre appliques pour les raisons suivantes :
ErreurLa version doit tre sous la forme "x" "x.x.x.x". "
"You changes cannot be applied for the following reason : formatting must be x to x.x.x.x"
The format should be "6.1 - Windows 7 /Windows Server 2008 R2 Versions".
The filter does work as intended with the english versions of ZCC. I have no problem with that but some of our admin does.
PS : I am currently unable to open an SR because our licence has not been renewed yet. So i am reporting this here.
Thank you!

Originally Posted by GuillaumeBDEB
Hi poplante, this bug is haunting Novell since version 11.0! Believe me on that. I'm the one who reported it. Here's the workaround.
1.Go to Server machine.
On Windows:
Go to
%ZENWORKS_HOME%\resources\properties\com\novell\ze nworks\core\web\internal\resources\CoreInternal_fr .proeprties
On Linux:
Go to
/opt/novell/zenworks/resources/properties\com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.proeprties
2.change the property value of windows.versions.6.1 from "Versions 6.1 Windows 7 / Windows Server 2008 R2" to "6.1 Versions Windows 7 / Windows Server 2008R2"
3.Then Restart the server. The issue will be gone.
By the way you will see this bug reappear with every new update of ZENworks including new service packs and monthly updates. So keep this workaround at hand just in case.
Hope it helps!
GuillaumeBDEB
In 11.3 the value seems to be:
windows.versions.6.1=Versions 6.1 - Windows 7 / Windows Server 2008 R2
But should probably be set to:
windows.versions.6.1=6.1 - Versions Windows 7 / Windows Server 2008 R2
And the correct Linux path would be: /opt/novell/zenworks/resources/properties/com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.properties.
This bug would probably take them a minute or two to fix, sad to hear that it's been there since 11.
Thomas

Table filter problem Jdeveloper 11.1.1.1.0

Hi,
I have problem with table filtering. When I filter table to get only one row I can not select this row to update child table (row is shown as selected).
Is there some option to overcome this problem?
Regards, Rok Kogovšek

I have problem with table filtering. When I filter table to get only one row I can not select this row to update child table (row is shown as selected).Does your child table have the master table ID in its partialTriggers?

Filter problem in the report

Experts,
We have a problem with Filter on Costcenter taking very very long time . When we click on Filter button on Cost center after executing a BW report, then a new window opens and nothing happens after that with a blank white screen in the filter window. We have tried so many options to improve performance but only one thing worked out as a work around.
I have deleted enteried in the master data table using TC SE14 and then reloaded master data. Then filter on this working now with in 1 min. But we have process chains running every day loading Master data .Once these process chains finish again when we filter on Cost center on the next day, now the problem still exists , takes long time to for filter window to open up. Is there any way to delete master data entries delete automatically. Any advice appreciated .
Thanks

Hi Kiran,
Is that u are doing the master data full upload?
Try to do delta loads.
If it is the client specific. Create a process chain to delete the same master data contents. and schedule the process chain to run daily night or just before the master data loads happen, so that it will not affect the runtime. Else have to delete the same manually.
Hope this helps u.
regards,
Kishore.

Upload file - filter problem

Hi all,
I have a problem with upload file using JSF RI 1.1 + tomahawk.
I think that the problem is in the web.inf filter definition because I get these warns:
17:11:51,875 WARN Digester:127 - [ConverterRule]{faces-config/converter} Merge(null,java.math.BigDecimal)
17:11:51,890 WARN Digester:127 - [ConverterRule]{faces-config/converter} Merge(null,java.math.BigInteger)
17:11:52,578 WARN ExtensionsFilter:34 - Please adjust your web.xml to use org.apache.myfaces.webapp.filter.ExtensionsFilter
And also this error when I click in a button to go to the upload page:
16:47:47,250 WARN ReducedHTMLParser:468 - Invalid HTML; bare lessthan sign found at line 127
When I click in the button to go to the upload pages the first time i get this error ad with the second click I get the right page.
It seems like he go to the filter the first time and then to the faces servlet the second, it is possible?
this is the code of the web.xml:
<filter>
        <filter-name>MyFacesExtensionsFilter</filter-name>
        <filter-class>
            org.apache.myfaces.component.html.util.ExtensionsFilter
        </filter-class>
        <init-param>
            <param-name>uploadMaxFileSize</param-name>
            <param-value>10m</param-value>
        </init-param>
        <init-param>
            <param-name>uploadThresholdSize</param-name>
            <param-value>100k</param-value>
        </init-param>
    </filter>
    <filter-mapping>
        <filter-name>MyFacesExtensionsFilter</filter-name>
        <servlet-name>Faces Servlet</servlet-name>
    </filter-mapping>
    And this is the code of the page with upload:
<h:form id="upload" enctype="multipart/form-data" >
                <h:outputText value="Gimme an image: "/>
                <t:inputFileUpload id="fileupload"
                value="#{fileUploadBean.myFile}"
                storage="file"
                required="true"/>
                <h:commandButton value="load it up" action="#{fileUploadBean.upload}" />
            </h:form>Anyone can help?
Thanx very much!
Message was edited by:
-Frizzi-

I don't have org.apache.myfaces.webapp.filter.ExtensionsFilter in my libraries, I only have org.apache.myfaces.component.html.util.ExtensionsFilter. I also tried to change it, but it still don't work...
I tried to redo all the process, and now I can't even access the action method in my backing bean....
I repost the the file that I use:
This is the error that I get when I try to use the action method:
16:24:11,203 WARN ReducedHTMLParser:468 - Invalid HTML; bare lessthan sign found at line 135
16:24:11,203 WARN ReducedHTMLParser:468 - Invalid HTML; bare lessthan sign found at line 180 web.inf snippet:
<filter>
        <filter-name>extensionsFilter</filter-name>
        <filter-class>org.apache.myfaces.component.html.util.ExtensionsFilter</filter-class>
        <init-param>
            <param-name>uploadMaxFileSize</param-name>
            <param-value>100m</param-value>
            <description>Set the size limit for uploaded files.
                Format: 10 - 10 bytes
                        10k - 10 KB
                        10m - 10 MB
                        1g - 1 GB
            </description>
        </init-param>
    </filter>
    <filter-mapping>
        <filter-name>extensionsFilter</filter-name>
        <url-pattern>*.shtml</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>extensionsFilter</filter-name>
        <servlet-name>Faces Servlet</servlet-name>
    </filter-mapping>JSF page:
<h:form id="upload" enctype="multipart/form-data" >
                <h:outputText value="Gimme an image: "/>
                <t:inputFileUpload id="fileupload"
                value="#{fileUploadBean.myFile}"
                storage="file"
                required="true"/>
                <h:commandButton value="load it up" action="#{fileUploadBean.upload}" />
            </h:form>BackingBean:
public class FileUploadBean {
    private UploadedFile myFile;
    private static Logger log =Logger.getLogger(FileUploadBean.class);
   public String upload() {
        log.info("FileUploadBean.upload");
        try {
        log.info("fileupload_isfile?"+ getMyFile().getBytes());
        log.info("fileupload_path"+ getMyFile().getSize());
        log.info("fileupload_name" + getMyFile().getName());
        System.out.println("myFilename" +getMyFile().getName());
        catch (Exception e){
            log.info("Errore nell'upload");
        return "ok";
    }Please help... I don't know how to solve it. Coul anyone post me a simple WORKING example?
Thanx a lot!!

Quadrature encoder on PCI 6220 DAQ custom digital filter problem

I am using both counters on my 6220 DAQ for quadrature encoders. What I am trying to do is filter some bounce that I am getting on the axes. I want to be able to custom set the minimum pulse width for each encoder (or both the same should be fine). The problem is that the digital filter using DAQmx channel property for each line seems to work fine (I haven't proven that this actually works) but one has to choose from preset values (the smallest being 2.55ms). I want to reject anything that is less the 10ms. This document mentions that you can set up a programmable filter based on an external filter clock. How do you actually do this? Is there no way to use one of the internal timebases for this? If so how? The "Digital Filtering Conciderations for TIO-Based Devices" entry in the NI-DAQmx help states that you can choose one of four different values for a debouncing filter on a PFI line (different values than the previously linked document) and a custom filter value.
OK here is the short question .... is there a way for me to digitally filter the lines coming into my counters to reject anything less then 10ms through software only? If so, how? If using an external timebase is required, how do I do this?
Thanks in advance for any help
Greycat

Hi Greycat,
Although the documentation does mention that you can have one programmable filter setting, this is only true for TIO-Based devices. Unfortunately, the NI-6220 is a M-Series, which means that the only allowable minimum pulse widths settings are 125 ns, 6.425 µs and 2.55 ms. More information on this can be found in your NI-DAQmx help under NI-DAQmx Device Considerations » Digital Filtering » C and M Series.
I believe for your application requirement, we would have to look into some oour Counter/Timer devices.
S_Hong
National Instruments
Applications Engineer

ADSL Interface problem

I have installed the Cisco 1721 with WIC-1ADSL and VPN module and configured to connect to the Japan network over VPMN from India.
WAN link is ADSL.(bridging mode)
It works fine,but suddenle I lose the CD in the ADSL interface card,and I lost the connectivity,if it works it works fine for say 4 to 5 days,If it lose the CD then I struggle to get the connectivity.When the CD is not detected that time if I replace the Cisco 1721 router with the ISP provided ADSL router then it get connected to the Internet.
This is not a permanent problem,it is a intermitent problem.
Could u please guide me?
Thanks and Regards,

Hello Gab,
your problem is indeed very annoying and common to xDSL backup solutions. Cisco has a 'new' feature called "object tracking" which is designed to address this issue, check this link:
Reliable Static Routing Backup Using Object Tracking
http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00801d862d.html
Basically, you track the object (ip address) on the internet via your primary link, if the primary link fails, the router will activate the backup link, effectively eliminating the dependency on the interface status...
HTH,
GP

Interactive Report Filter Problem

Hello,
I ran into a problem with an interactive report today. When the report first loads, no issue. If a filter is added, an error is returned. The error is actually generated by an assertion routine that raises and exception if a NULL value was passed in. Here's a modified/simplified version of the query:
SELECT id,
   name,
   dept,
   emp.year_of_emp(hire_date) AS years_of_employment
FROM emp_table
WHERE id IN (
   SELECT c001
   FROM apex_collections
   WHERE collection_name = 'EMPS_UNDER_MANAGER'
);Again, when the report first loads, no problem. Then when the manager applies, say a filter on dept, an error is raised from the emp.year_of_emp function because a NULL value was passed in.
I know that all emps with an emp id in the collection have a hire_date so I don't feel as though I should have to add another condition in the where clause to filter those out (although that is the work around at this point). Anyone have any ideas as to what could be causing this?
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur

Roel,
Hey there! Hope you enjoyed your time off ;) Thanks for having a look...
Yes, of course I "could" update the functions, but this is NOT something I want to do. I'm one of those people that subscribes to Coding by Contract and the assertion routines at the beginning and end of my subprograms are an important part of that.
This may be a lack of understanding on my part with regards to the order in which Oracle does it's thing - or a bug in Apex... I'm able to duplicate the problem on apex.oracle.com: dmcghan/test/test.
Log into the demo app with admin/dmcghan. The home page has an interactive report, filter the name and you should get the error. When you look at the query you'll see a filter in the where clause that goes against the apex_collections table. This is populated from the post-authentication procedure. Let me know if you have questions.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur

Anyone familiar with Graduated Filter problems in LR-5?

My problem is that the filters only function with the edit pins and I cannot filter the complete image without selecting an area first. (My presets still work)
No clue what happened, please help me out.
Thanks!

runningkatze wrote:
Thanks Rob...
You bet .
runningkatze wrote:
In LR 4, the tools seemed so much more forgiving. In LR 5, it is incredible sensitive.
I don't think there have been any algorithmic changes in red-eye, Lr5 vs. Lr4 (certainly none mentioned by Adobe, nor in Victoria Bampton's very thorough list of changes in Lr5, nor that I've noticed in the forums...), so if it is behaving differently (you sure it's not you? ), then it sounds like something is a-wonk now in your Lr5 (or was a-wonk before in your Lr4 ).
~R.

ALV filter problem

Hi,
I am facing a problem with the ALV grid. Recently our system got upgraded to ECC 5.0
There is a column in the grid for displaying message texts.If i try to set a filter for the message text column,a popup comes as usual to select the values in the message column. In that popup, suppose a F4 help is taken, texts are getting truncated.
Could you please suggest any OSS notes need to be added for this?
Regards,
Raju

Hi,
try to use EDIT_MASK for that field and see.
you try this way..
<b>
Fieldcat-edit_mask = '==ALPHA'.</b>
for the text field.
Regards
vijay

Xcelsius Using BICS filter problem

Hi
I am using xcelsius with bics remote services
Here my problem is like
In Bex query itself i put filter for products(Ex pencil,pen,Book,Papers)
in Data connectivity(xcelsius Side) screen also i applied filter(in input values)for product
I am using drill for pie chart to fill the filter cell in spread sheet
Based on the filtercell the listbox will display the product names
Here my problem is listbox is show pens and pencils(when i click on pens and pencils in pie chart respectively) but it not showing papers and books(when i click on books and papers in pie chart)
So what i am understood is filter is working properly but y its not applied for all product
Guys could you please help me?

Hi Venkat,
Can you please tell me, which kind of Variable you are using for filtering.
If you are filtering without variable. your query won't give the data other than those materials u have filered globally( means in query global filter pane).
Even though your problem looks like issue with drill down. please check.
Thanks and regards,
Sriramvijay.R

ADSL Filter Problems

Similar Messages

Maybe you are looking for