Adsl, modem, router & AEBS

I have introduced a Level One broadband router on gateway mode between my x modem and the AEBS. THis seems to have caused the AEBS to start dropping the signal - the effect on the Macs is that on the airport menu we get the message 'airport scanning'. Previously we had a solid signal
Any thoughts? Is it in the setup - should the airport be in bridge mode?

Thanks Duane.
I'm still after the same features I mentioned. ADSL modem for being an ADSL modem, VoIP and QoS, AEBS for everything else.
I tried leaving the AEBS as a bridge, but couldn't reach any ports on anything behind the AEBS, even after putting it in a DMZ on the ADSL modem.
I do now have it working, in case it helps anyone else:-
Billion - NAT and DHCP on, VoIP configured and QoS to throttle everything when a call is active. Assigning a static IP to the AEBS, and putting that IP in the DMZ.
AEBS - NAT and DHCP on (share a public IP address), static IP to my main mac for forwarding some ports, and NAT PMP on which seems to work by auto-opening other ports as needed (i.e. iChat video works with it enabled, and not with it off).
So there 'ya go. May not be conventional (?), but all seems hunky dory.
Cheers.

Similar Messages

How to set up TimeCapsule (4th) to create own private (wired) network behind Airport Express (5th) that is set up to join existing wifi-network of fritz adsl modem/router?

I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?

Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative.

Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router

Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router
1. I’m writing from a rural town in Southern Nepal, very close to India. I’m planning to create a new WI-FI network at a small monastery here. Ideally, we will have two parallel wireless networks: the first network produced by an ADSL router/modem and a second network produced by another router in “repeater” mode.
2. Earlier, someone suggested that, when I post a question, I should provide as many details as possible about the situation here. Forgive me if there is “too much information”. I have to make a trip to the US to buy new networking equipment, so I very much want to get this right. Once I return here, I’ll be pretty much stuck with whatever I get in the US.
3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go). We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging). Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
4. If my dreams come true, the second router would be an Apple Airport Extreme (AX). An Apple router would be ideal because my experience with Apple routers is happy: they are easy to set up, reliable, and secure. Moreover, we use Apple computers and iOS devices here (and the new AX has the “ac” thing which will be preferable as we replace old machines with new ones).
5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
6. Our current, super-crappy 2wire 2701hg-t (ADSL modem/router) covers the 100-foot distance without a problem when it is working and there is Ethernet flowing to us. Frequently, our connection is very bad, and I may be unfairly judging the 2wire 2701hg-t. But, based on user reviews on the America Amazon.com, the 2wire 2701hg-t is pretty terrible: first it is simply old and second, among other problems, it seems to have a poor quality power supply unit. I do observe that it frequently seems to be recycling from scratch as if it had turned off and restarted. In any case, we are replacing it since it may be about 4 or 5 years old.
7. In previous posts on this forum, “LaPastenague” responded to some of my earlier questions about AX and ADSL. Among other things, he pointed out that (1) line-attenuation may be contributing to our poor connection and (2) we must choose a modem/router that is suitable for “long lines.” I’ve looked at our current modem/router statistics page; however, there are no statistics for line-attenuation or noise. (As you will see below, my strategy is to get the “better” modem/router that is suitable for long lines.)
8. Concerning our ADSL service, these are the facts I’ve gleaned from looking at the current router’s configuration pages:
Connection Type: PPPoE
Currently, the router is configured to use WPA-PSK security.
Connection Speed: Incoming: 1024 kbps & Outgoing: 509 kbps
(The following information may be unimportant at this time.)
Broadband Link Diagnostics:
DSL Synchronization: UP
G.DMT Signal: UP
PVC Connection: UP
PPPoE Service: UP
PPP Authentication: UP
IP Connection: UP
DNS Communication: UP
9. The ISP (Nepal Telecom) doesn’t supply a modem/router; however, they do have a list of (at times ancient) hardware and hardware vendors:
http://www.ntc.net.np/internet/adsl/adsl_vendersConf.php
10. Concerning what equipment is available here, what I have observed is that generally the ADSL modem/routers for sale locally, and in the far-away capital Kathmandu, and in nearby India are often also available in the United States, but they are the cheaper, older models. I will have to buy the new equipment in the US this year. At a different institution nearby, they are using the TP-Link modem/router td-w89016 which they purchased locally, I believe.
11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described? That is, connecting the two with a cable and creating two WI-FI networks.
12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
13. In fact, does connecting them with a cable help alleviate some of the problems that can occur between the Apple device and the ADSL modem/router?
14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)? I have heard of the “repeater”, “roaming” , and “bridge” modes.
15. Are there two levels of passwords which need to be considered? Of course, there is the network and network passwords which we create here and which will be different. But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
I think there are a lot of good reasons to use an AX router. Of course, if it is just going to be very cumbersome then, we would be loosing one of the best parts of using Apple products. So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple. Apple can rest assured that I will buy other things from them!
In that case, I’d likely buy a second TP-Link device to create a second network:
TL-Wa801NP [AP Mode Multi-SSID Mode AP Client Mode Repeater Mode (WDS / Universal) AP+ Bridge mode (point-to-point / point to Multi-point)].
Thank you in advance. Long live Apple!
Message was edited by: Jess1911

I am not sure if there are different interfaces but my 2wire does an excellent job with line info.
I get into this from browser.. using main IP.. in my case 10.0.0.138/MDC
In your case it should be whatever the IP of the 2wire is, followed by /mdc
Give it a try.
As you can see it shows vendor and loads of info about the line.
I rate it the best domestic modem for line info.
A good modem actually albeit a lousy router.
MDC is the diagnostics and Management Console.
3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go). We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging). Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
You are not repeating.. you are simply setting up two routers which are interconnected, so one is dependent on the other.. ie one is your adsl modem router and that will take the main router function. Your second router is really not working as a router, but as wireless access point (and switch if you plug things in).
That is perfectly fine. You are not roaming in this case since both routers are running different wireless names and networks.. but they are actually using same IP range.. all devices are on the one IP network with two different wireless access points.
4. If my dreams come true, the second router would be an Apple Airport Extreme (AX).
Apple router is fine for this. Easy to configure out of the box.
5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
The problem arises when you try and interconnect using wireless extend or repeater.. you are not using wireless to extend, you are using ethernet. Wired has no issues.
11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described? That is, connecting the two with a cable and creating two WI-FI networks.
It is a good choice.. It should be fine considering how poor your line is.. this modem is proving to have a couple of bugs.. it does not handle torrents well but I would suggest your system is not being used for that purpose. It has some port forwarding issues. Again you are probably not going to overload it.
12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
Absolutely best.. only decent method.
14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)? I have heard of the “repeater”, “roaming” , and “bridge” modes.
Bridge. Although if it gives issues there is another method, although rather complex to setup.. not something to worry about now.
15. Are there two levels of passwords which need to be considered? Of course, there is the network and network passwords which we create here and which will be different. But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
Only the adsl modem has the ISP authentication.. it is the box that does the link. The TC just piggy backs.
The passwords on the TC are for its Admin, wireless and disk access.
16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
For ADSL you must have the PPPoE authentication username and password.
So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple.
hmmm.. I am biased because I see the issues not all the good stories..
The latest airport and Time Capsule seem to have a few pretty severe bugs.. if they happen to hit you, they are extremely hard to fix if you are in the middle of Nepal. And Apple service centre is a long long way away.
I cannot answer your question from the point of view of a person on the ground in remote area. If the economics of the purchase works for you, great. Go for it.
In terms of wireless coverage.. the Asus AC models or Netgear R7000 kill the Apple. Sorry but it is just fact.
See reviews here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c
That is average.. if you look at the apple router in the worst location by changing the filters, it comes out worse again.
I cannot post the URL to our local forum here.. (apple doesn't allow it). But in testing with apple clients the asus still beat Apple router soundly.
Pure wireless range is not the only consideration.. but in a mixed environment and since the wireless on the 8980N is not too bad.. then buy Apple router for apple client devices makes good sense.
Maybe the older Gen5.. or two of them.. would do a better job.. with a bit more tested and known hardware.
One thing you do need to check.
Routers from every other brand allow you to select country. Any country from anywhere in the world. Apple routers do not.
If you buy an airport in North America it is coded to North America and offers just a few countries.. USA, Canada I suppose.. what else is North America??
You cannot change it to Nepal.
To get the one for Nepal you must buy the model that covers, South Asia I guess.. I am not sure which it is.
See what the license information is for wifi in Nepal as it might be very different to US and therefore illegal for you to run it in Nepal.
If only the whole world would just bow to America.. we could all follow the FCC regs..
http://en.wikipedia.org/wiki/List_of_WLAN_channels
This only applies to the Apple.. the TP-Link etc allows you to choose Nepal or correct country regulations for wifi.
Buying modems has one tricky bit.. that the actual adsl ATM channel is different in different parts of the world. No modem is usually impossible to setup but some can be difficult if it is pre-configured for US.. this is easy to overcome generally as you can download a firmware for another locality, so you can have local settings.

Airport Express & Netgear DG834G 54Mbps Wireless ADSL Modem Router

Could you offer any advice as to whether an Airport Express could be used as a range extender for an existing Netgear DG834G 54Mbps Wireless ADSL Modem Router setup as I really like the idea of Airtunes and sharing a USB printer. I gather that it is possible to use an Airport Express to extend the range of an Airport Extreme basestation setup but have not been successful in finding any info regarding the Netgear.
Any info gratefully received !
G5 Dual 2.3Ghz Mac OS X (10.4.6)

mac-junkie, Welcome to the discussion area!
No it can not be used as a range extender.
But you can still use it for music and printer support. See KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Confused - best way to configure / connect AEBS to ADSL Modem/Router?

I currently have an ISP supplied Innacomm W3400V wireless modem / router that is poor at wifi. I've looked at several modem / routers to replace it with, such as the Linksys E4200, but have decided to give an Airport Extreme a try.
Now I've read a lot on the internet about POSSIBLE options for connecting the AEBS to the current modem (which I might replace as well) but what I can't seem to fathom is what is the BEST method in terms of performance, ease of management etc etc. As far as I can tell there's two main options:
1) Leave the modem router set up 'as is' (e.g. with the PPPoE settings and with it handling NAT and DHCP etc) but turn wireless network and security off, connecting the AEBS in Bridge mode. This seems to be the simplest way. Out of interest, the Innacomm has 4 ethernet ports, if I use this method, will I be able to to use the 3 ports on the AEBS and the 3 spare (given the AEBS will be connected to one of them)? Any problems / issues with using this configuration?
2) Switch the Innacomm into Bridge mode and turn off wireless, DHCP, NAT (anything else) and configure the AEBS with the PPPoE sign on details and DHCP ranges etc. Not sure what benefits there are to this, esp if I CAN still use the modem / router's 3 sparE LAN ports. Might be something I'm missing though?
At the moment I only need to improve wifi performance and hope the AEBS will do it. I'm just not entirely sure of the BEST way to set it up with my existing router (or even a replacement modem if I find it necessary to go that route.

Also, there's no benefit to be had by putting the original router into bridge mode and having the AEBS provide all the PPPoe, DHCP and NAT functionality (or would it in fact be worse)?
The only real reason to consider doing this is if you need the AEBS to provide both a "main" and "guest" network. Here, I am ssuming that you have a recent version of the AEBS.
In Bridge Mode, the AEBS can only provide a "main" network.
When the AEBS is configured to provide PPPoE, DHCP and NAT services, then the "guest" network feature is enabled if you need that functionality.

ADSL modem/router and AEBS - how to setup?

G'Day all.
I've been using a Billion ADSL modem, with a 802.11g wireless feature for the last year or so. I have in my network:-
24" Core2Duo iMac
AppleTV
12" Powerbook
A few iPhones
Nintendo Wii
I now have a new AEBS and want to use that instead of the wireless in my ADSL modem. I can get the new wireless working, and still connect to the internet if I set up the AEBS in "bridge" mode, but the ports I had open/forwarded etc. before no longer work... (many apps that used to listen for connections can't be reached from "outside").
What I ideally want to do is:-
Use the ADSL modem for it's VoIP feature (inbuilt ATA), and QoS (throttles my internet connection during a VoIP call). I want to use the AEBS for everything else - wireless, NAT, etc. So, the ADSL modem is fairly "dumb" in this setup.
I figure that this way, both products can do what they are best at. When I need to use iChat etc., I know that it should pretty much just work, as long as I "enable NAT Port Mapping Protocol" etc.
Can anyone tell me how to do this? If I turn off the just disable "NAT" on the ADSL modem, I can't get on the internet at all...
Thanks in advance.

Thanks Duane.
I'm still after the same features I mentioned. ADSL modem for being an ADSL modem, VoIP and QoS, AEBS for everything else.
I tried leaving the AEBS as a bridge, but couldn't reach any ports on anything behind the AEBS, even after putting it in a DMZ on the ADSL modem.
I do now have it working, in case it helps anyone else:-
Billion - NAT and DHCP on, VoIP configured and QoS to throttle everything when a call is active. Assigning a static IP to the AEBS, and putting that IP in the DMZ.
AEBS - NAT and DHCP on (share a public IP address), static IP to my main mac for forwarding some ports, and NAT PMP on which seems to work by auto-opening other ports as needed (i.e. iChat video works with it enabled, and not with it off).
So there 'ya go. May not be conventional (?), but all seems hunky dory.
Cheers.

Which wireless adsl modem router???

I am completely confused by the various products and descriptions out there. My current G4 iMac is wired into D-link ADSL modem and I now have a G4 iBook and a MacBook and a Dell Inspiron XP wireless laptop in the house.
I am looking for a wireless modem router or router, which will be compatible with all above and be very easy to set up without too much technical ability. I understand that the Apple Airport Extreme base station has been withdrawn and so I have been looking at something like Netgear DG834G.
I would also like my Epson 1520 printer to be connected via USB to the router, as it was available on the Apple base station.
Can anyone help me.
Thanks
Desmond
imac G4 Mac OS X (10.4.7) D-Link ADSL modem

A simple solution if your D-Link has more than one LAN port is to get an Airport Express.
The G4 iMac and Airport Express would be connected to the LAN ports, you could then use your printer.
Check out the following website.
Reviews of equipment
http://www.adslguide.org.uk/reviews/
iFelix

Recommend me wireless ADSL modem router which supports IPv6

As the topic says. My previous device broke up contract with me and since my ISP supports IPv6 (at least in theory) I'd like to set up IPv6 network at home.
Thanks...

I did not mean to imply that Netopia was the only maker, you asked for a combo wireless router and ADSL modem; that was what came to mind.
IPv6 is has not been finalized and there are still many other aspects of the protocol that need to be finished before it is just dumped into the public. Also you need to think about the scale that we are dealing with when we are talking about changing from IPv4 to v6. There are not too many things between the two that are similar. Remember that the reason for IPv6 is not because its a newer thing, it is because we are running out of v4 addresses, but in the PUBLIC realm. Internally even large companies have an abundant of addresses using the private ranges such as 10.1.x.x; 172.16.x.x and 192.168.x.x for each class A,B,C respectively. The great advantage if v6 is that we will no longer have to use NAT, which can be problematic depending on how it is implemented. Right now when IPv6 is used it is actually being NATed from IPv6 to v4, and believe it or not that is what you will end up doing if you make your internal network v6. So you see there is no reason for any mfg. to hype IPv6 when it is still a mute point. We will start seeing more and more IPv6 within the next couple or years and once more large corporations begin to implement and are used to work out all of the kinks will we start seeing packaging hyping v6.

Problems reconfiguring ADSL modem+router to modem only

I've currently got the Netgear DG834G working as a modem+router and connected to the AEBS which is in bridge mode.
I want to use the AEBS as the router. I've discovered how to set the DG834G to modem only, but I cannot get the internet connection working like this. It connects using PPPoA. It asks me for a LAN IP address.
I'm not sure what I should be entering on the AEBS. In Airport Utility, under Internet, I have connect using Ethernet, IP address as the static IP address given to me by my ISP, for subnet mask I've entered 255.255.255.0, for router address I didn't know what to enter, and I've tried using the same as the static IP address, also tried a slight variation on that (increased the last value), I've tried using the IP address of the modem, but nothing has helped. The DNS server settings I've entered are those provided by my ISP. For connection sharing, I've set it to Share a Public IP address. NAT is enabled.
I've got no idea what is wrong. I've read in other threads about power cycling the devices, so I've tried that and it didn't work.
Perhaps if someone could point me to the right settings, perhaps it's worth power cycling again with the right settings. I'm particularly baffled by 2 things 1) what the AEBS wants for the Router Address and 2) why the modem has an IP address (perhaps just for accessing it's web based control panel?).
Help would be most welcome - I feel I have exhausted all of my 'trial and error' options.

If your ISP has provided you with a static IP address, then they will also have provided you with a subnet mask, a gateway or router (they are the same thing in this context) IP address, and domain name server address(es). It is essential to know this router (or gateway) IP address.
I've just reconfigured the DG834G back to mode+router, and noticed that when it connects it shows the subnet mark and gateway. My ISP only provided the IP address, and the Netgear seems to get the other details automatically. I have made a note of them, so I will try again entering them on the AEBS.
What remains unclear to me is exactly what functionality remains to the Netgear device when - as you said - it becomes configured to work as a modem only.
The info on the web control panel says it loses all routing functionality when in modem only mode.

Safari 5 causes Netgear DGN2000 ADSL modem/router to crash

I installed Safari 5 yesterday on my Macbook Pro running OS X 10.6.3
The installation went fine. Almost immediately my modem/router crashed (I think due to a DNS problem) and I was unable to log into the router to reboot either from a Mac or from a PC. I need to power cycle the modem/router to re-establish my broadband connection. I've confirmed that this happens every time I launch Safari 5 after loading one or two pages from the net. My Macbook is fine if I stick to Chrome or Firefox. I have the beta (Gala) version of Adobe Flash player 10.1 installed and I'll check later whether uninstalling this solves the problem.

Safari 5 also crashing my netcomm NB6 adsl2 box. I have to reset it every half a dozen pages if I use safari 5. Firefox not causing the same problem.
I tried turning my develop menu off in Safari, it didn't help.
It happened without using google.
It seems like pages with lots of links to different sites are more likely to cause it (though I've stopped using it now, and didn't test much). I don't like to speculate, its not my code, but I'm guessing it could be the DNS prefetch that got mentioned as a feature.

Connecting my WRT610N with my other Modem\Router (Philips ADSL Modem\Router)

Hi, I recently purchased a WRT610N Dual Band router and I have some questions to ask. I plugged the UTP cable (blue one) from my modem's\router's (Philips) ethernet port 4 to "Internet" port of the WRT610N router. In "Basic" Setup I chose "PPPoE Connection" (my ISP here in Greece working in PPPoE) and everything gone fine. WRT610N seems to log to Internet and everything is OK....but... In those 2-3 days that I'm working on it, I am curious in How this works.. and if my setup is 100% ok because I one bizzare problem.. the problem is that I run a DynDNS.com Client application, cause I wanna have Remote access from my work. this client has logs, I reviewed the log and I see that every 10 or 20 minutes (exactly 10 or exactly 20) my IP is different.. (I use dynamic IP from my ISP)...and I ask : What I have to do to the MODEM\ROUTER from one side and WRT610N on the other side? What setup? What exactly I must do to be 100% sure that everything is working fine? NAT ? firewalls from the two routers? DHCP ? In general I mean... Thanks and.. sorry for my English.. (I'm from Greece so.. )
Life Is Painless.. (for the brainless)

Forget it and.. SORRY.. (If a moderator can delete this thread..please do it..) I found the right answer in this thread :
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=26177
Life Is Painless.. (for the brainless)

Experience Using New Nighthawk AC1900 Wi-Fi VDSL/ADSL Modem Router (D7000-100NAS)

I am getting frustrated with my Netgear 7550 modem/router with attached Netgear WNDR4300 router when playing Xbox. It will often drop connection in the middle of an online game and restart itself. I am considering replacing them with the new Netgear AC1900. I have ATT DSL.I would hate to spend $250 for the AC1900 if it won't solve my problem.

I am getting frustrated with my Netgear 7550 modem/router with attached Netgear WNDR4300 router when playing Xbox. It will often drop connection in the middle of an online game and restart itself. I am considering replacing them with the new Netgear AC1900. I have ATT DSL.I would hate to spend $250 for the AC1900 if it won't solve my problem.

Netgear Wireless ADSL Modem Router

I am able to easily connect my Windows based laptop to the Internet, but am having problems using my Imac wirelessly.
When I go Open Internet Connection, the Airport frame status shows "Connected to "billcarolinternet42", signal level maximum ..... but
the computer doesn't seem to be connected to the Internet!
Please help, as my mother is getting tired of Ethernet cable!!
thanks Bill

Check points:
iMac has correct network name and password?
iMac is set to 'use DHCP' and has obtained IP number from the router?
Has the router been set to accept only specific MAC addresses (MAC is nothing to do with Macs, it's a unique number allocated to every ethernet or wireless card)? If so has your iMac's MAC address been intered?

Connecting a WRT54G2 V1 to a ADSL Ovislink Modem router combo

I am trying to set up my linksy router to a ADSL Ovislink Modem router combo and when I install the CD on the main computer I keep getting this error message
"Error 322- New router or gateway not detected"
I have hooked everything up correctly as the CD has instructed me. My TV, phone and internet all are on the same package. I have powered down both th ADSL and my linksys and still not detecting the linksys. The 1 computer light on the linksys blinks evry now and than and so does the ((( light will blink sometimes too.
I had my cable modem hooked up to it in August and it worked fine and than we moved and the place we moved to has ADSL modem router and I need to hook up my router to get internet as the ADSL only allows one computer to be hooked up through the ADSL one. So I know there is nothing wrong with my router.
Any suggestions would be helpful.

If you are trying to setup your router using the setup disk you can exit from the setup and configure all the settings on your router manually.
If your Internet Service Provider is DSL follow this link

Zoom ADSL X6 modem router

My previous ADSL modem failed (Possibly lightening strike)!
I had no means to get to this list to find a recommended modem, specifically for iChat which I use every day. I went to my local PC World because it was the only place I knew I would get a choice at that time of night, and the only ADSL modem router which mentioned Mac OSX on the box was a Zoom ADSL X6 modem, quite low cost. So I bought one - and it works out of the box.
BUT - it doesn't talk to Safari (3.0 beta). The first page will not load fully, so I had to use Camino.
There is an issue with filling in the ISP details, where the details for the log in to the modem front page gets entered into the ISP log in details. They are different and it takes some work to keep them separate.
Also the Zoom.com company pages do not load correctly in Safari 3 - they are missing the top menu bar so you cannot navigate the site.
Andrew

Hi
Some router/modem's have touble with safari(2 & 3).
They seem to work better with Internet explorer.
I would have liked you to have got a Netgear DG834.
Tony

Adsl, modem, router & AEBS

Similar Messages

Maybe you are looking for