ADSL2+ Live, How long for service upgrade?

I live in Thaxted (EATHA Exchange) and having just checked my exchange, via samknows, I am surprised to see that a 21CN WBC date is set for 31/07/2012. I thought that we were going to be ignored completely by BT (beyond ADSL Max), so am very very happy to see that the upgrade is taking place.
I have done some further digging and BTW info says WBC 21CN live date between 01/07/2012 and 31/07/2012. Also having checked on BTW's ADSL availablity checker I get the following:
Your exchange is ADSL enabled, and our initial test on your line indicates that your line should be able to have an ADSL broadband service that provides a fixed line speed up to 2Mbps.
Our test also indicates that your line currently supports an estimated ADSL Max broadband line speed of 8Mbps; typically the line speed would range between 7Mbps and 8Mbps.
Our test also indicates that your line currently supports an estimated ADSL2+ broadband line speed of 17Mbps; typically the line speed would range between 10Mbps and 19.5Mbps. Our test also indicates that your line could support an estimated ADSL 2+ Annex-M broadband upstream line speed of 1.5Mbps and downstream line speed of 17Mbps; typically the downstream speed would range between 10Mbps and 19.5Mbps.
BT Retail says available NOW!
So it seems that the exchange is ready and I would guess that new orders are automatically being put onto WBC 21CN.
I've not had any comm's from BT regarding an upgrade.
Question is, how long will it be before I get upgraded?
Thanks,
We5tyBoy
Solved!
Go to Solution.

True enough. Though I shall report back on the 16th, until then everything is crossed!
I'm hoping to get a good speed on ADSL2+, my stats suggest so I believe:
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
0 day, 19:41:45
Downstream:
8,128 Kbps
Upstream:
448 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Fast
Noise margin (Down/Up):
10.1 dB / 25.0 dB
Line attenuation (Down/Up):
16.5 dB / 10.0 dB
Output power (Down/Up):
19.9 dBm / 11.8 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
7 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
9 / 0
Error Seconds (Local/Remote):
0 / 0
Out of interest, what upload do you think could I expect?

Similar Messages

  • Where can I find how long until my upgrade?

    I have the Motorola Rival and I can not stand this phone! I just stopped working..the screen is blacked out and the keyboard and everything is blank and its done its not working anymore and I want to know how long until my upgrade? I cant find it in My Profile ANYWHERE! HELP PLEASE!

    If you call customer service they can tell you how long until your upgrade and if you phone is broke and your not eligible for an upgrade yet ask about gettting a certified pre owned phone. Your allowed one per year but you have to pay for it. I think I got my droid eris to replace my broken phone and it was $169.99+tax and you can have the equipment billed to your next bill.

  • HT202159 how long should an upgrade to Mountain Lion take? Our original download was interrupted by power outage and now seems to be taking forever.

    How long should an upgrade to Mountain Lion take? Our original download was interrupted by power outage, it seems to be taking forever.

    Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
    http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
    Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
    Don't use wi-fi wireless for Mountain Lion recovery.

  • I just got an iPhone 4s and I added a passcode, the problem is I forgot my passcode. It says 'iPhone is disabled' but it doesn't say how long for or connect to itunes. How can I get my phone back? Any help please:'(

    My iPhone is locked and doesn't tell me how long for, and it doesn't say to connect to itunes... Please help me:(

    It did not work on mine It just turned it off then I tried to remember my pass code and it locked me out again, Also when i get on itunes it says it cant do anything for me because there is a passcode on my phone

  • Just purchased Lion...how long for the install wirelessly?

    Just purchased Lion...how long for the install wirelessly?

    Yes, the installer will launch automatically and wait for you when you wake up to proceed with the Lion installation.
    Good Luck, and remember to back up your data always before installing operating systems or OS patches.

  • Rarcrack - how long for the file with 400 MB ?

    Hi everyone
    I'm trying to get the password in the encrypted file with 400 MB. It's more time I thought.
    If someone have used the program, rarcrack, can you tell me know that get the password with special characters ? 
    For example:
    The encrypted file with 400MB + the passwords "?_123_123_abc_@theworld".
    How long for that ?
    Thank you very much.
    Last edited by luckybc (2014-12-26 06:29:07)

    Does rarcrack know how long the pass-phrase is or not?
    Also, are you using a dictionary/removing obvious choices of pass-phrase to help speed up the process OR are you brute-forcing every single pass-phrase from the ASCII alpha-numeric alphabet + punctuation?
    TL;DR: Assuming I've done the Maths correctly, a damn sight longer that you might have thought
    Since you haven't said, I'm going to assume YES to the first question and I'm assuming you're brute forcing, to make the maths simpler.
    For one character position you're looking at about 26 lower case + 26 upper case + 10 digits + 10 punctuation marks of some sort. So that's 72 characters. You've got 22 characters in the passphrase, so that's a potential of 72^22 = 7.26632672153 x 10^40 pass-phrase combinations.
    Now let's assume you're doing this on modern hardware, with an SSD on a single machine which can process something at the rate of 200MB/s. That's two seconds a pass. That'll take you about 2.01842408931 x 10^37 hours.
    Disclaimer: I'm working off the assumption that encryption has been used, and that rarcrack would decrypt the whole file on each attempt (pass-phrase protection and encryption are different things...). I don't actually know how it works, but for those that do know how it does, you can probably work out the time from the number of pass-phrase combinations.
    Last edited by clfarron4 (2014-12-26 12:01:20)

  • How long for the I watch sport to be delivered from buying today 2nd May until it arrives at my door roughly?!

    how long for the I watch sport to be delivered from buying today 2nd May until it arrives at my door roughly?!

    What did the email say that confirmed your order? It states on there an expected delivery date. This is a user to user support forum, so no one here would really know when it would be delivered, only Apple would, and they do not participate in the forum.

  • How long for new apps for review and approval by apple?

    Hello there; was wondering if for a new apple developers' account, how long for a brand new app review? We submitted ours 6 days ago and wondering how long until the app gets reviewed and once in review mode, how long before approving it on the app store? Our app has been thoughraly QA'd and developed according to the Apple standards and recommmendations. Thank you.

    When i uploaded my application it took around 12 working days, If there is any problem in the app, apple team will send you the error to the mail.

  • How Long For Fixing and Release WPA/WPA2 on N900?

    Hay Nokia!!
    I use N900 Maemo PR1.2 Lasted update.
    At home i'm create WPA2-Shared-key (Belkin Router) it's worked.
    At Friend Home i'm used WPA2-Shared-key (Belkin, Lynksys, D-Link) it's  worked no problem.
    At Office i can not used WPA2-Shared-key with Lynksys difference model it's not worked, but many co-worker worked with iPhone.
    and My Friend use iPhone 3Gs worked with all WPA2 - Shared Key that i'm try with N900.
    i try change MAC by macchanger it's a same Not worked.
    i'm asking for Maemo.org they toll me it's BUGS -_-"
    How long For Fixing and Release??

    you will not get a response as other then the mods,  nokia folks do not really watch this blog.   your best bet is the maemo community where you were before.
    maemo.org

  • How long for upgrade reset after returning a phone to Amazon

    I returned a phone purchased at Amazon.com last week and I am wondering how long I should expect it to take for my upgrade to reset. I would like to purchase a phone soon.
    Thanks

    You may need to contact the Amazon site/seller.  If you bought it from them and returned the phone to them then they would have better answers even if they were just the point of sale and Verizon handles the contracts and plans.  Typically you have to work with whichever method you chose to buy with.

  • How long for upgrade response?

    How long does it take to get a response about a free Lightroom 4 upgrade? I called support 2 weeks ago and was told I would get an answer withing 24 hours. I then found out no case was opened for me. I then opened a case on 5/10, provided the requested receipt and cant get anyone to respond or give me an answer. How long can it possibly take to verify my reciept?

    This is a User forum so we have no answers to what you are after.
    Ask over here

  • How much for CS3 Upgrade?

    I was trying to get upgrade information regarding Adobe's new
    Creative
    Suite bundles online, but all the relevant web pages appear
    to be down.
    I've struck out with technical support, too.
    So, if any of you have already researched this, could you
    suggest even a
    rough estimate of what I might have to pay for Web Premium?
    I have Photoshop CS Version 8 on my PC and recently purchased
    Dreamweaver 8 for Mac. I want to upgrade to Web Premium for
    Mac. At the
    very least, it would be helpful to know what kind of upgrade
    price
    they're offering people who have Dreamweaver 8 only.
    Thanks.
    www.geobop.org - Family Websites
    www.invisible-republic.org - Adult political websites (Mature
    adults only)

    > If Adobe wants to trade abroad, and therefore incurs
    extra expenses why does
    > it take out the extra expenses only on non-US buyers?
    > So US designers should have to pay higher prices just to
    make designers
    > outside the US happy?
    >>I did not ask Adobe to trade abroad or establish
    offices abroad. None of us
    did: we don't want these offices and we don't need them.
    But maybe Adobe does. If it were necessary for them to
    establish offices and they didn't, I'm fairly sure I'd be reading
    posts like "Adobe is snubbing us."
    >>Adobe wants these offices and needs them to make more
    money.
    So you're on Adobe's Board of Directors now? How do you know
    their motivation? Also, you stated "why does it take out the extra
    expenses only on non-US buyers?" thus implying that if there were
    extra expenses involved for doing business worldwide, everyone
    should bear the costs including US customers. Say I have 2 clients,
    Bob and Mary, and I visit each one to do an in-person consultation.
    Part of my rate structure is to charge for mileage for in-person
    consultations. Bob lives next door, and Mary lives 50 miles away.
    If I go to visit Mary, I don't charge Bob half the cost of when I
    go to visit Mary.
    >>I just want to be able to download the same software
    as my American colleagues for the same money. But Adobe is trying
    to force me to buy the same software for a lot more money, citing
    localization costs...
    Maybe that is one of the reasons, maybe not. Since I'm not on
    the Adobe BoD, I'm not going to say "Well it's this reason, or that
    reason." When people talk about capitalism, they are funny. First,
    they want to charge people what they want for services they
    perform, whether it's designing, or cooking, or whatever they do
    for a living. However, they scream to high heaven when they
    perceive another company to be overpricing their product. For
    instance, I can make $25/hour working for a company, or I can
    charge 4 times that amount for design work I do on my own. It's the
    same work, but the amount paid me is significantly different. The
    beauty of this is that if a potential client, or company, doesn't
    to pay me that amount, they're free to go elsewhere. If I note a
    drastic reduction in demand for my services, I have the choice of
    reducing my rates. Who knows? Maybe Adobe will change their
    policies if the market shows they're losing money. As I've said, if
    you don't want to pay the price, don't buy the software.
    >>while it does not even have the courtesey to address
    me in my own language on the site I am forced to order from.
    You seem to be doing fine with English :-) . Maybe it is a
    lack of respect, as you've stated. However:
    A) Most web designers can read and write English.
    B) Adobe is shooting themselves in the foot by shutting out
    the few designers who can't read English, so hopefully that lets
    you sleep a bit better at night.
    >> So what I'll get for the fortune Adobe wants, is:
    American software, with an American interface (no Dutch version
    avaiable, not that I would want a Dutch version),
    > I fail to see a problem here. You're not getting
    something you don't want.
    >>Come on: I am paying almost double the price than
    Americans pay for exactly the same thing. You don't see a problem?
    You are not being serious.
    You COMPLEEEEETELY missed the point. You stated that you
    don't want a Dutch interface. Adobe doesn't supply one. No problem.
    That's like being allergic to seafood and complaining that a
    restaurant doesn't serve salmon.
    > My anger is growing, and so is my resolve not to
    upgrade.
    > So don't. It's not like DW is the only web design
    program out there. In
    > fact, you can probably find an open source program for
    free if you really
    > look, or just stick with your current version.
    >>That is irrelevant and quite a lame argument. I want
    to upgrade, and why should I not be able to upgrade at the same
    price as my American colleagues?
    Why should I be paying for Adobe wanting to branch out?
    It is neither irrelevant, NOR is it a lame argument. I don't
    want to pay taxes, but I deal with it. Also, as mentioned
    previously, I had purchased an education version of Director when I
    was a student a long time ago and wanted to upgrade to the
    non-educational version. However, Macromedia's policy was I would
    have to pay the full price, not just the difference. Guess what? I
    didn't buy the full version. I wasn't happy about it, but I dealt
    with it. Is someone forcing you to go with Dreamweaver? Is someone
    holding a gun to your head? If you want the Spry network, download
    it from Adobe's site for free. From everything I've read, Spry
    integration is about the only really major difference between CS3
    and 8. There are plenty of other web editors out there. No one is
    telling you you have to use DW. Also, do you have to upgrade right
    now? As mentioned in another post, I haven't upgraded since MX2004.
    If people in the EU and elsewhere don't upgrade due to the pricing,
    Adobe will probably revisit their policy. Who knows what *all* of
    the costs are for selling overseas? Do you?
    > This whole issue makes me think of gas prices. It could
    be one price at one
    > station, but just a mile away (at a station for the same
    gas company) it's
    > 20%> higher, simply because it's in a different
    neighborhood.
    >>I fail to see what that has to do with it. Surely
    people are not forced to fill
    up at the one expensive station?
    How did I know you would miss the point on this one also? The
    point is that there are different operating costs in different
    areas, so the prices fluctuate.
    >>They drive a mile further and use the cheaper
    station. But Adobe is stopping Europeans and Australians from
    driving the extra mile to get cheaper gaz.
    Adobe has only one station open to us, and that is the very
    expensive one. That
    is the problem.
    But if it really IS more expensive to sell globally and (due
    to factors which neither of us know about) they did need to open
    international offices, why should Adobe be obligated to absorb
    those costs? Again, if you don't want to pay the extra fees, don't.

  • How long for shipping?

    How long does it take for them to ship from china? I was pretty surprised when I saw that it was shipping from shanghai,CN. Unless I have my abreviations wrong and it's somethin else, how long does it take to ship usually when you get the upgraded 60 gig drive

    It's really weird. I just recently ordered my iBook w/ iPod (personalized from Apple), and both shipped from China. The iPod's taken around 3 days, and it's in Madison, WI, where I live. My iBook has shipped two days ago and apparently it's still in the FedEx depot in Shanghai, so I'm hoping to get it soon! Yeah, I just check the updates regularly like that...

  • How long does an upgrade to Yosemite take?

    Upgrading from Mavericks, the system appears to be stuck. I'm on the screen with the apple logo and a progress bar. The bar has not moved in an hour and is about half way. This is the screen after the initial install progress screen when an estimated time was provided. There are no extra sounds from the HD indicating any processing.
    how long does the process typically take?  Is there a way to stop it without totally fouling things? 
    Thanks,
    Anne

    I Found another thread that had a resolution. Thank you SATopWater  for your suggested steps. That appear to be working for me.
    This solved my question by SATopWater on Oct 17, 2014 12:41 PM
    I'm not recommending this to anyone, just thought I'd report on what worked for me:
    -  Let Yosemite upgrade sit at the white progress bar screen at 50% for 4 hours.
    -  Once I was nearly positive it wasn't doing anything like writing to the hard drive...
    -  Held power button for 10 seconds to turn computer off
    -  Waited about 10 seconds again
    -  Turned power on and held Command R  (It took about 3 minutes to boot)
    -  Clicked on WI-Fi symbol on upper right and turned off Wi-Fi
    -  Selected restart from the System menu option
    -  Computer rebooted and finished the upgrade
    I have since rebooted (twice to be sure) and run a few things and all seems fine at this point.
    See the answer in context

  • How long for in-app purchases to become active again after submitting an expired paid contract?

    We let our paid contract expire and therefore all active in-app purchases stopped working.  I just filled it out and it is now in-effect, but does anyone know roughly how long before these in-app purchases will become active again?

    Hi ,
    I'm very sorry to hear of the problems you have had moving to pay as you go.
    Please can you give customer service a call and ask to speak to the pay monthly retentions team who will be able to fix this issue for you.
    Click here for contact details.
    Thanks
    James

Maybe you are looking for

  • Problems after playbook update

    Hello blackberry users, I installed the new upgrade for the playbook last week and since then I have been running into the same problems; - extreme lag when playing games or surfing the web  - playbook freezing on games/web/home screen  - "Browser" n

  • SSID not showing

    The company I work for has all its APs controlled by a WISM. I recently deployed an AP out to a WAN site and when the AP boots up, I am able to see on the WISM, able to ping from the WISM and vice-versa, able to ping the IP addresses of the SSID from

  • Appraisal Document Error in ERP6 EHP6 and Portal 7.3

    Dear All, I am on ECC6 EHP6 and Portal 7.3 and using WDA ESS and MSS business packages. I have gone through all the below notes: 1600380 - Appraisal Document does not open in portal 1468466 Performance Management Launchpad Configuration 1463821 Perfo

  • SXMS_CONF_ITEMS

    hi under component monitoring, under self ping test, I see four options. One is does the Integration engine know the buisness system ? Another is Are roles in SXMX_CONF_ITEMS and SLD consistent ? What exactly do these tests mean ? When do we use thes

  • Audio previews in Leopard

    Hi In tiger, when you went to preview an audio track in the finder, you could skip to any point in the track as well as adjusting the volume. In leopard, you appear to just get a black icon with a play button- not quite as useful, or am I missing som