ADSM AnyConnect Client Profile Editor will not close...

When I fire up ADSM and go into the AnyConnect Client Profile Editor It will not let me close the Editor.
If I go it and jsut hit cancel, or OK, or the X, nothing happens.   The only way to exit is to Close down Java.
I've run ADSM on a few machines all with the same results.
ADSM Version 6.3(4)
Thanks

I Upgraded to ADSM 7.1(2)
This resolved my issue.

Similar Messages

  • Editor will not close down, frozen.

    Editor in Photoshop 13 will not close down, seems frozen.

    Go to Activity Monitor, search for "itunes," and quit every process related to iTunes.

  • Anyconnect Client profile files deleted after client upgrade

    L.S.
    I am running anyconnect version 3.1.02040 on a Windows 7 64-bit machine with UAC turned on.
    The ASA I am connecting to is a 5510 running ASA OS 8.4.5
    The problem I have is the following:
    We are using machine certificate authentication combined with RADIUS user authentication.
    The machine certificates are stored in the Machine/Personal container in the local machine.
    By default, the anyconnect client does not have the rights to access this certificate store when run by the user in non-elevated mode.
    We do not want to have the user run the client as administrator (in elevated mode) all the time.
    Therefor we have made an Anyconnect Client profile that sets the Certificate Store Override parameter to true and attached it to the group policy.
    With this XML in place (in the C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile folder)
    the users can connect to the ASA and authenticate using the certificate without the need for elevated rights. This is all working perfectly.
    The anyconnect client and XML file are distributed to the clients using a software distribution system (Microsoft SCCM).
    The problem happens when I update the Anyconnect package on the ASA. I recently updated the package to release 3.1.03103. This is what happens:
    The user can connect using the 3.1.02040 client (certicate authentication works without elevation, since the XML Anyconnect Client Profile is present)
    The Anyconnect software updates itself to the new version during the connection, pushed from the ASA.
    The VPN is established.
    However, the XML file that is associated with the group policy is deleted during the upgrade process and not placed back in the Profile folder on the client after the upgrade.
    This means the user cannot connect without using elevated rights the next time he wants to connect.
    If he uses elevated rights after the upgrade, the XML is pushed back from the ASA normally, allowing the user to connect without elevation again any subsequent times.
    Is there any way to push the XML profile to the client from the ASA after the upgrade of the Anyconnect software?

    Hi poiu720408 ,
    1.  You need to set up a web-url or group-alias under the group policy as web have enable the "tunnel-group-list enable" under the webvpn configuration.  So once the user connect to the proper URL/alias the profile will be applied. 
    http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
    2. Yes the Anycopnnect store a "Cache " information on the PC , if you want to clan up you have to go to the anyconnect folder on C: on the PC and delete the global_preferences.xml profile.
    3. This behavior is totally expected and they should disappear  after a some minutes , however if you wan to force this , you can use the command "vpn-sessionsdb logoff webvpn noconfirm"
    Please rate helpful post !
    Hope this helps
    - Randy -

  • AnyConnect Client Profile in ASDM

    I am trying to configure a client profile under the AnyConnect Client Profile tab in the ASDM but keep getting an error message stating "Check that you have a proper AnyConnect package installed in the AnyConnect Client Software menu.  Also check that your ASDM username have enough privelege."
    My user has sufficient privilege but I am not sure which AnyConnect software I should have to enable this.  Righ now I have
    anyconnect-win-3.0.10055-k9.pkg installed.
    This is a lab setup using GNS3.
    Any ideas?

    Hi Marius,
    I would assume you are running ASA 8.0x, right?
    Please check this out:
    "If you wish to use the ASDM-integrated Profile Editor to configure any of AnyConnect's components, you must use ASDM version 6.4(1) or later."
    Security Appliance Software Requirements
    So at this point, I would suggest to try to upgrade your ASDM to 6.4 or try with AnyConnect 2.5.
    Let me know.
    Thanks.
    Portu
    Please rate any posts you find helpful.

  • Assigning AnyConnect Client Profiles based on the machine?

    I have an ASA running 8.2.x code with AnyConnect 2.4.x.I have both Radius and LDAP (AD) AAA available.
    If a user connects from a company owned laptop, I want to push down AnyConnect client ProfileA (with scripts to map drives etc...) and network ACL's set A.
    If a user connects from any other computer, I want to push down AnyConnect client ProfileB (no scripts etc...) and network ACL's set B.
    What I would like to do is CSD to do a machine certificate check (for presence of a cert from my private CA) and to assign a EndPoint Policy attribute (Managed on successful check or Unmanaged on failure). I can then use DAP to tailor the ACL's that get set.
    It seems like the only way to handle AnyConnect client profiles is with Group-Policy. Using LDAP I can assign a user to a Group-Policy, but I have no way of determining is they are coming in from a company laptop or not when assigning the Group-Policy. DAP can not assign an AnyConnect client profile.
    If at all possible, I do not users to have to pick a conenction profile or use different URL's.
    Is there anyway to accomplish this?

    Hi
    Did you ever resolve this issue?  I am trying to assign a specific IP address based on the hostname or machine cert but the certificate matching doesn't seem to look at the machine cert.
    Has anyone got any idea how I could do this?
    thanks
    Steve

  • "Anyconnect client profile" option missing in ASDM

    Hello,
    I'm in the process of setting up Anyconnect on the ASA, and have successfully updated the licensing, as well as uploaded the anyconnect pkg for web deployment. I enabled anyconnect on the outside interface and can now have the ASA push the client to the machine. Works fine. However, I want to add backup servers that the client will attempt to reach in the event the primary is down. I understand that "client profiles" can be created to customize settings like this. Problem is, when I follow the configuration guide with instructions for making client profiles at this location:
    http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/ac02asaconfig.html#wp1289905
    It shows that I should have an option for Anyconnect Client Profile and Anyconnect Client Settings.
    I don't have either of those options in ASDM. Here's what mine shows:
    I have another "SSL Client profiles" option, but it doesn't seem the same as the options above.
    Can someone assist with what I need to do to get the Client Profiles option to be available so I can add backup server information to the client? Thanks!

    Thanks for the response Marvin,
    It shows the ASA and ASDM versions are 8.2 and 6.2 respectively.
    Result of the command: "sh version"
    Cisco Adaptive Security Appliance Software Version 8.2(1)
    Device Manager Version 6.2(1)
    Result of the command: "sh act | i Ess"
    AnyConnect Essentials        : Enabled 
    I don't have the premium license, just the Anyconnect Essentials and Mobile licenses. I would imagine essentials should have the same profile configuration options, though. If it is in fact because I'm running an older version of ASDM, do I need to update both the ASA IOS and ASDM together, or can I just upgrade ASDM on its own? Thanks again.

  • Editor will not open in elements 7

    I had to reboot my computer to factory settings and installed El 7 several times and editor will not open. Error message elements editor has stoped working. I have installed it in my sons computer and no problem. Can any one pull me out of this black hole?????????????

    Hi!  I have fixed problem. The solution is to upload on a different user.  Thanks,    Doug
    Date: Mon, 14 Jan 2013 22:53:09 -0700
    From: [email protected]
    To: [email protected]
    Subject: Editor will not open in elements 7
        Re: Editor will not open in elements 7
        created by ukgaurav in Photoshop Elements - View the full discussion
    Hi, Please try couple of probable solutions as mentioned below: Solution 1:1. Close Elements.2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences. Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.Solution 3: Try launching with anti-virus off or removing PSE from conflicting list. Solution 4: On the drive on which you have installed PSE,on my machine it is on C:    Go  to C:\Program Files\Adobe\Photoshop Elements 7.0\Locales\\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.    Now launch PSE and check if it works.    For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743 Thanks,Garry
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4994422#4994422
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4994422#4994422
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4994422#4994422. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • ITunes will uses 100% cpu and will not close in OSX Lion

    When I start up iTunes, after a few minutes, the fan kicks on and Activity Monitor shows that it is using 100% CPU. The fan kicks up and the MBP gets warm. I have to force close to get it to shut down. iTunes match is constantly running, so maybe that has something to do with it?
    I'm not running it in Mini Player mode or anything like that, so I'm not sure what's causing the problem. Any thoughts on how to diagnose it?

    I also have this problem which has been getting worse with recent successive updates of Firefox. As a long-time user and advocate, I am about ready to look for an alternative browser. Firefox will not close and exit properly, requiring direct cancellation through Task Manager; starts up very slowly (often 1 to 2 minutes); and frequently locks up the CPU with 100% of cycles while doing NOTHING; offers to restart crashed sessions, but cannot recover and reload those sessions; will not operate correctly while any other application accesses the internet, like uTorrent. Firefox is set to delete cookies, etc. whenever the session closes, sqlite database is vacuumed regularly, CCleaner regularly wipes remaining accretions, and disk is defragged. Currently running 3.5.5 but will NOT upgrade until this problem is solved since later builds report the same problems. I know several other users who have experienced the same problem and I can no longer automatically recommend Firefox to users and clients. Is anybody paying any attention to this problem? What is being done to address this fault? Why is there no response to the original poster? Is this really a support forum or just a way to preoccupy and distract the users who suffer this malfunction? Wireless 54Mbps connection. No Adobe Flash, QuickTime, MS Silverlight, etc. installed on this machine. Firefox 3.5.5 with the following add-ons:
    Aardvark 3.0
    Adblock Plus 1.2.1
    Adblock Plus: Element Hiding Helper 1.0.6
    Free Download Manager plugin 1.3.4
    Highlighter 0.1.4
    MR Tech Toolkit 6.0.4
    repagination 2006.4.5.1
    Save Complete 1.0.1
    Session Manager 0.6.8.3
    Tab Mix Plus 0.3.8.4
    Unhide Passwords 1.2.5.1
    User Agent Switcher 0.7.2
    Thanks for any help or suggestions.

  • AnyConnect - Client profile

    Hi all
    I have a very quick question, been trying to find a solution but fail till now. The issue, is there is a default time for AcyConnect client profile to be downloaded/updated when you create a new client profile
    Example: if I have already a client profile (XML), then if I create a new Client profile. When the user connects, it should be using the new client profile correct. But this was not the case. The user was using the old client profile. However the new profile was updated on the client side after 8hrs.
    Ok as a workaround you could delete the xml file from the client PC, however my question is,is there is an option to enable this to be downloaded after creating the profile. I have checked everywhere with the client profile and was not be able to find any setting. If someone knows could you kindly share this please?
    Thanks in advance
    Lancellot

    Hi Lancellot
    as soon as you modify the profile on the ASA (or create a new one), all clients will download this profile as soon as they connect.
    Two things to note though:
    1. the new profile is only downloaded if the user logs in successfuly. So once the tunnel is established, you should see the new profile in the local profiles directory.
    2. Many settings in the profile are applicable *before* the new profile is downloaded, i.e. some are applied only before a connection is initiated (e.g. start before logon), others only during the connection attempt( e.g. automatic certificate selection).
    Similarly, if you add new ServerList entries to the profile then they will only be visible in the client GUI after the client downloads the new profile and disconnects.
    Does this clarify the behavior you saw?
    Herbert

  • AnyConnect Client Profile Backup Server Configuration

    I'm trying to understand the use of Backup Server option in AnyConnect Client Profile
    Configuration > Remote Access VPN > Network (Client) Access > AnyConnect Client Profile > Edit > Backup Server
    (Screenshot attached)
    My questions:
    1. In what all scenarios do we add servers (ASA devices) in this tab
    2. If I have same information in two different locations (Site A and Site B) for AnyConnect user, can I add Site A-ASA and Site B-ASA into Backup Server tab as a failover mechanism for end user.
    3. Or is it only used to mention ASA devices configured in failover unit
    4. In case of failover unit, does it support stateful failover
    I could not find answers to above questions from Google search. So, asking here

    I think we need to be careful when we talk about failover. The original post was clearly asking about two different scenarios
    1) ASAs at two different sites
    2) ASAs configured as a High Availability failover pair (Active/Standby).
    The profile does work to provide failover in 1) but does not work to provide failover in 2).
    I do not know the authoritative answer to the question about IP phones use of the profile. I believe that the answer ought to be that yes the phone would receive the profile after its first connection and would use the backup server identified in the profile is the primary server was not available. That is a basic functionality of the AnyConnect client and if the phone is using the AnyConnect client then it ought to support that failover. 
    If someone does have an authoritative answer then please speak up. Several of us would like to know the right answer here.
    HTH
    Rick

  • Elements 12 (Editor) will not open?

    I have Adobe Photoshop Elements 12 installed on my Windows 7 computer.
    I am no longer able to open the Editor portion of the program. The Organizer seems to be working but every time I try to switch to the Editor, I get the following error message.
    "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close program.
    Thanking you in advance for any help regarding the above problem.

    boogboog2
    Please review and consider and do not be put off my the Premiere Elements in the title.
    See mention of my experiences with getting Photoshop Elements 12 to finally work.
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    Thanks.
    ATR

  • Premier elements 13 editor will not open.

    Premier elements 13 editor will not open and gives the error A problem caused the program to stop working correctly. Please close the program. I have reinstalled twice and confirmed my pc meets all the requierments.

    NOTE - McAfee kills the program http://forums.adobe.com/thread/1460089?tstart=0
    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •You MUST use an account with Administrator Privileges to run Premiere Elements
    •(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Which version of Quicktime do you have installed?
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Help! My PSE8 Editor will not work!

    When I try to open it, the editor will not load and I get an error message when I attempt to open a previously saved document I did in photoshop. the message says that the editor will not work. I already tried the ctrl+alt+shift keys at startup.

    I am having the same issue. In my case the software was inside the new computer that i've purchased.It is a vaio with windows 7, 64bit.The organizer runs normally from the first time.When I tried to open the editor, appeared the license agreement on which you have to accept in order to continue. I clicked accept but absolutely nothing happened.Then I had to start task manager and close the program because it didn't respond.
    I also tried to restart my pc and re-do the whole process, but again nothing changes.Any ideas?

  • ASDM Anyconnect client profile - unable to edit preferences

    Hi,
    I have a functioning vpn set up, my problem is that I'm trying to set up anyconnect start before login. I navigate to the anyconnect client profile section in the remote access vpn and create a profile xml file by clicking the add button. I can add a profile but as soon as I save the file I can no longer edit it. The edit button is greyed out and if I double click the file the asdm returns the error: "Input is not a well-formed, schema-compliant XML file."
    I'm running the following versions of software:
    asdm: 7.1(5)100
    anyconnect: 3.1.05152
    asa: 8.2(3) <----asa hardware doesn't support running a newer version.
    I have not been able to find any info on this particular problem but maybe someone here can help?

    Hello Ryan,
    Do you run into the same problem if you upload AnyConnect 2.5 and perform the same task?
    Also, have you tried this operation from a different machine with and old JAVA version like 1.6?
    HTH.

  • Mail won't display the viewer window, and it will not close (force quit does not show in menu bar).  Can't shut down to reboot because the open mail program prevents it.   Any advice?

    Mail does not show the viewer window even when new viewer window is cliced.  I tried to close mail and reopen, but it will not close, and force quit option does not appear in window bar.   I tried to shut down the computer and reboot, but it cannot close because of open mail program it says.    Help!

    Many thanks.  Once I was able to close mail, it reopened and behaved quite normally.  Thank you.  I'll remember the option quit for force quite!

Maybe you are looking for