Adter adding new ztv10 W 300 ZTE Router command prompt changed

I just installed my new ZTE Router (ethernet+wifi) model ztv10 w300 and got it working even though I seem to be having a few ip address conflicts. The question I have now is why do I see local0026bb05005b:~ jasper$ when I open a command prompt now instead of Jaspers-MacBook-Pro.local:~ jasper$ as before? Under sharing I still have Jaspers-MacBook-Pro.local, but no longer in the terminal. Why? Is this going to cause issues? How do I revert?

The hostname can be changed dynamically by routers and other network devices through DHCP requests, which can have the hostname keep changing every time your IP address and other DHCP information is renewed. If this is the case, you may be able to set the router to never provide hostname information, or you can set the computer to never accept a hostname change. To do this, you will need to add a line to the computer's hostconfig file using the following procedure:
Open the Terminal
Enter the following command:
sudo pico /etc/hostconfig
Authenticate, scroll to the bottom of the file, and add the following line:
HOSTNAME=MacBook
(Change "MacBook" to your desired hostname--no spaces)
Save the file and quit by pressing control-X, confirming the save with the "Y" key followed by "enter".
After this has been added to the file, the computer's hostname should not change even when you renew your DHCP lease.
Cheers

Similar Messages

Unable to connect to VM's in new cloud service via express route

We have changed our express route setup, initially we had an express route via London, but we have added a second one via Amsterdam and removed the one via London. All existing and new vm's in the different vnet's have connection to our local datacenter,
but as soon as we create vm's in a new cloud service the published routes don't seem to be picked up and the machine are only reachable in their local vnet on azure.
Does anyone have an idea where to look, it looks like the route publishing does not seem to work correctly, but it is strange that new vm's in existing cloud service do work correctly. BGP peering and vnet have been provided access via the expressroute and
all have status provisioned.

Hi Syed,
When I try to connect to a new vm via rdp or try to do a tracert to the machine (with firewall turned off on the vm) I don't get a response (traffic is routed via the express-route correctly). If I do a tracert to an ip on the on premise network
from the vm in question the trace is directed to internet instead of to the on premise network via the express route.
the new cloud services were created in the same region as the working cloud services and the vm's are also in the same vnet/subnet as the working vm's. If I delete a vm (keeping the disks) from a new cloud service and redeployed it in an existing cloud service
I can reach it again via the internal ip.
We have checked the route publishing and the correct routes are published to the express route/vnet.
When I check the provisioning of the vnet's via get-azurededicatedcircuitlink all the vnet's in question are listed as provisioned.
I'll try to remove the bpgrouting for the original expressroute this evening to see if that helps.
kind regards
Xander

Airport (new applemac pro) connection to router issues?

Hi all
I know this subject as been aired many times, and I have scoured the forums for an answer but there does not seem to be a definitive answer. But here goes with our particular issue. We bought a new 15inch apple mac pro laptop a few days ago. Being PC users this was a big step for us.
Setting it up was not a problem but what is an issue is the so called Airport hardware/software.
I use a Belkin N wirelss modem/router F5D 8633-4 uk. This connects my PC and 2 pc laptops (PC and 1 laptop us ethernet cable, the other uses wireless connection). all works wonderfully well.
Having set up the account in the apple mac pro as instructed, we find that:
*we had to change from PPPoA to PPPoE
*the ethernet connection is fineish
*the wireless connection is not and cannot find our network. It shows it on the list but refuses to ackowledge it, it greys out?
It does for some odd reason connect via PPPoE but shows no network and thus when I check my PC for connected devices the apple mac does not show up. It may be using another network but I have no access to any other than the one we use at home.
I spoke to the people at Belkin who took me through the ethernet connection and helped sort out an issue re outgoing mail (it would receive and not send). The ethernet connection will now do both. Issue resolved.
However, not so through Airport.
We have tried adding new account, deleting accounts and even deleted the keychain as is suggested in these forums.
I have spoken to apple helpdesk but to no avail. Might need another go.
Basically all I am after, is that the laptop through Airport connects to the network and recognises it as such.
Any help gratefully recieved.
Keith

I was given this as a solution from another forum, it seems to work:
The only place you need to be making changes is in System Preferences > Network > Airport
However, before you do that, connect the MBP to the Modem/Router with ethernet cable.
Can you access the internet and do everything else that you need to?
Go through the Wireless settings on the router again, and remove any security (purely temporary).
Go back to the Mac and set up the Network > Airport (it may now be called Wireless) for your wireless network.
Once the security has been removed and you have restarted the router, can you connect to the wireless network?
If you can, go back and add security to the wireless network, WPA2 should do, make a note of the password/those numbers, and try again.
The PPPoE thing should only apply to the Modem side of the Modem/Router, to connect the Router to the DSL line and should not apply to anything on the Router side of the device. All your computers and network printers will not be concerned anything to do with PPPoE. The Router side of the device deals only with regular TCP/IP and wireless.
The wireless side of the MBP is not concerned with how the Modem talks to the outside world (ISP). If it did, then you would constantly have to reconfigure your wireless network on the MBP every time you tried to connect to a different wireless network.
Hope it helps.

Will adding AirPort Extreme to my fios router improve my speed and distance to led tv.. The tv keeps dropping network and 50% of the time it tells me my broadband is too slow. I have upgraded to fios faster internet speed.

Will adding AirPort Extreme to my Fios router improve reception on tv located about 50 feet away..have new top of the line samsung smart tv and it drops signal every other day. When trying to watch netflix or amazon it transmits in SD only says bandwidth is not high enough for Hd. My ipad laptops and iphone work fine in this room. Any help will be appreciated or am I better off with a booster.

The AirPort Extreme will not be able to wirelessly "boost" or "repeat" the wireless signal from the Fios router, since It will only work with another Apple router for that feature.
So, if you plan to extend or repeat the FIos wireless signal, you should use a product by the same manufacturer as the Fios router....or possibly a "universal" repeater from a company like Netgear.
Make sure that you understand the store's return policy before you buy any kind of extender or repeater.....since you cannot know if the product will help until you try it out in your home.
The TV really needs a wired Ethernet connection from the Fios router if at all possible.

HT4259 When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

You don't have to do anything to the netgear.. the Express cannot wirelessly extend non-apple networks. You must plug the Express in by ethernet and create a new wireless network.. this can be the same name (SSID) and security as the netgear so it can become a roaming network.

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

In ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M

Added new fields in vendor master in xk01 but data is not getting saved

Hi experts,
To add new fields in vendor master i have followed the following steps :
1.) Appended a structure ZRTGS in LFA1 table with required fields and activated
2.) Added new button in xk01( vendor master ) using spro -> logistics-general -> business partner -> vendors ->
control ->adoption of customer's owaster data fields -> prepare modification free-enhancement of vendor master record
Created a screen group ZR and defined label tab pages with function code ZRTGS and saved entries
3.) Created a implementation for BADIs VENDOR_ADD_DATA and VENDOR_ADD_DATA_CS.
4.) Created a program with my own subscreen for the required fields
The button is getting displayed in XK01, XK02 and XK03 respectively. Whenever the button is clicked the subscreen with
the fields is also displayed. But whenever i try to save the data in either XK01 or XK02 it is not getting saved in to the
database table LFA1.
Request your help in this regard.
Thanks in Advance.

Hi,
You may need to check this include .
EXIT_SAPMM06E_008 -->Import Data from Customer Subscreen for Purchasing Document
Thanks,
vamshi

Adding new date field to already loaded data target.

Hi,
we have a cube containing date feild such as 0CALMONTH. the data is being loaded to the cube. now they have added new date feild (0FISCYEAR). how to get data to this feild. there is no data coming from source system for this feild. please can any one tell me how to include this feild and load data into it.
with regards,
sreekanth.

Sreekanth,
If Record creation date is the right field for deriving fiscal year, Why cant you derive the year from the date...by using automatioc time conversion...?? In update rules...??
For exising data, you can do loop back to populate the data. see the below doc, for more info:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f421c86c-0801-0010-e88c-a07ccdc69601
Hope it Helps
Srini
Message was edited by: Srini

I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

Adding new albums to smart playlist PLEASE HELP

Having a little trouble adding new albums to smart playlist that already exist. Can this be done?

Having a little trouble adding new albums to smart
playlist that already exist. Can this be done?
I am trying to edit smart playlist but songs dont show up, they are in the library.

Adding new characteristics to cube with data

Hi Gurus,
i need to add some characteristics to a cube already in production, this cube is customized version of material stocks/movements cube (0ic_c03).
i am looking for a way to add the new characteristics without having to do reinitialisation (opening stock,...), i am thinking about a loopback process but how do i manage to get the new characteristics populated for the historical data?
Thank you.

Hi,
If you want to load historial data, you must take ECC down time and re-intialization is required.Becasue you are adding new object in Cube and for that you need to change the Update rules, then need to load historical data, so without down time and reinitialization it is not possible.
Check like below.
You have data in PSA, so try to delete data from Cube and then load from PSA. Because you may write code in Update rules on;y I think. So in that case, it may work.
Thanks
Reddy

Adding new fields to Item Data - PO (ME

Hi All,
Is it possible to add new custom fields to PO Item Data in Confirmations tab and these new fields are required only in PO Change (ME22N).
How can we achieve this!
Can anybody provide feasible solution for the same!
can anybody tell me if this is possible!
Thanks in advance.
Thanks,
Deep.

Hi All,
Thanks for the reply.
Can anybody confirm BADI ME_GUI_PO_CUST will acheive desired functionality for above posted issue!
Functionality: Adding new custom fields to confirmation tab. During Inbound delivery in confirmation tab (Item data) if 'Confirmation category' is selected then the new custom fields should show up below for input & they can be saved.
if 'Confirmation category' is not selected then new custom fields should be invisible.
Thanks,
Deep.
Edited by: Deep on Jul 24, 2009 4:49 AM
Edited by: Deep on Jul 24, 2009 5:05 AM

Adding new fields to the data flow

Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveen

yes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda

Adding new data to update multiple series in charts - in one action

I would like to know how to update a data series range in a chart all at once as can be achieved with Excel by
manually entering row numbers to expand the data series range or
by dragging a reference frame in a table to include additional data in the range.
At present, the only way that I have discovered I can update a series is to manually change the cell reference detail for each series individually. This is achieved by selecting a single line and clicking several times on the Data reference cell in the Inspector Chart option by highlighting the cell reference details and then manually changing the cell reference for each series separately. This is tedious, time consuming and more than a little clumsy! What used to take me a few minutes to update my charts in Excel is taking me tens of minutes in Numbers.

theguardian wrote:
I would like to know how to update a data series range in a chart all at once as can be achieved with Excel by
manually entering row numbers to expand the data series range or
by dragging a reference frame in a table to include additional data in the range.
Unless I'm misreading this, similar techniques work in Numbers.
The original table contained only the sequential labels in column A and the data shown on the upper chart.
I made two changes, similar to those in your list (but in the opposite order, hence the reversal in my numbering):
2. Added data to cells B11:B15 (labeled J-N). (The data added is a copy of the first five data from the original series.) Selected the chart, then expanded the data series by dragging the control (small circle) down to include these cell (plus B16) in the charted range. The chart updated to include this data.
1. Selected B11:B15, then went Table > Add Rows Below (keyboard shortcut: option-down arrow). Numbers added five rows to the table, and updated the chart to include those rows, as shown in the lower version of the chart. Paste the data into these new rows to add it to the chart.
Although I had selected rows inside the charted range when adding new rows (to keep that "O" label on the x axis and show the 'space' before it), the five rows could as easily have been added to the end of the chart. Select B12:B16, press option-down arrow.
Regards,
Barry

Adter adding new ztv10 W 300 ZTE Router command prompt changed

Similar Messages

Maybe you are looking for