Adv Car Kit CK-7W - Bluetooth Problem !!

I recently got a new car, which has the CK-7W Installed in it.  I took out an old cradle that was in it, and decided to try to use my N96, via Bluetooth. (I fitted a Brodit Holder for the N96 - Just a holder no power etc)
I managed to pair it no problem,  however it drops the connection and switches of after 20 secs or so ?
After a while it turns back on, makes a connection and then drops it straight away, etc, etc, etc !!!
I have used my N96 on a Parrot and other bluetooth connections, and its fine, it just seems to be this one in my car ... lol.
Has anyone got any ideas, I have read the manual, I have reset the Box by disconnecting it, I have rest the bluetooth connections !!
I'm at a point now where I am ready to rip it out and get a parrot ck3100 fitted !!!
Cheers

The phone is on, when I get in the car, with bluetooth.
I start the car .... the remote light comes on ... it beeps, it says connected on the phone, and then 5 secs later it drops the connection.
The remote light goes off, it then comes back on 2 mins later ........ connects, and disconnects straight away, and so that continues.
The phone stays on throughout.
The distance is not an issue it is no more than 40-50cm from both the remote, and the Main box.
There are no other phones in the car.
I have reset the box, by disconnecting it
I have reset the Bluetooth by turning off and holding the remote button down, until it beeps.
Like I say I have no problems connecting to other Bluetooths, like the Parrot ck3100 in my wifes car, it will stay connected all day long.
I have even had the box out to look at it, and all looks fine, good connections etc.

Similar Messages

  • Problems Car-Kit CK-7W Bluetooth connection not st...

    Hello,
    I have the following problem :
    I have in my Car a Nokia CK-7W Car-Kit. The phone i use is a Nokia N73 with the latest software 4.0736.3.2.1.
    the only connection i use is the bluetooth i dont use the cable connection.
    Verry often when i am calling someone the connection is suddenly not good anymore. there is suddenly a lot of noise so the person on the other side is just hearing noise and could not understand me anymore.
    Calling again will not solve the problem they cant understand what i am saying.
    The only solution is to turn the ignition key to 0 so the car-kit is turned off and then restart again.
    Also has to power off the N73 and back on --> problem solved for a while.
    I have tried with my older Phone Nokia 6280 there the problem is not the same. Sometimes it is also not good but not the same as with the N73.
    With the 6280 i have also a different problem that it is not posible to disconnect the line when calling. so when i push the CK-7W button for a disconnect the line keeps open the only option is the read key on the phone.
    So i dont know exacly what is defective , is it the car-kit or are both the phones not good.
    Does anyone has the same problem.
    Someone told me that it is because i have one of the first CD-7W car-kits so they have software that is to old. I dont think that it is normal that there are so much problems. They have told me that i have one of the first versions because my paing key is not 0000 but a nr in my case 1819.
    When the CK-7W Module is defective , does anyone know if it is possibe that i just buy a Module without the other accessories.
    Thanks for the advice.
    DCA

    Hello,
    I can ubderstand if yo have installed more than 100 CK-7W that you are sure that the passcode must be 0000.
    I am 100% sure that on my original box there is CK-7W and on the manual the passcode is 1819.
    I have also a POP connector + cable (wich is not installed ) to connect the phone with cable. Has the CK-1W also this possibility ?
    What i dont can see is the correct nr ont the main unit because it is stiil someware behind the dashboard.
    The only think i can think of is that i have received a ck-1W like you told but is was in a CK-7W box. The manual deliverd was also CK-7W but the passcode was on a label that was put on the manual so they have the possibility to make a misttake.
    I dont think that after +- 3 year i can go to Nokia an ask them for the correct one ?
    So someone had made a mistake , maybe at Nokia or maybe in the shop. Why i dont know . the only thing i know is that i have a lot of problemens with this stupid thing.
    If you have installed 100's of the CK-7W can you advice me if the stupid thing is working fine or that i be better of to buy another one ?
    I only need a goed stable working Car-Kit not with display,....
    Thanks
    DCA

  • E51 muting car kit in silent mode upon receiving S...

    Hi,
    I've recently changed my 6230i to an E51 and have a new problem when using it with the CK-7W car kit connected via bluetooth. I have no sounds associated for receiving an SMS but it keeps muting the car radio for the action - just for a second but it's really annoying. It works ok for calls but I can not stop it from muting the radio for something that should not make a sound. It used to work great with 6230i. Any ideas?

    Just a shot in the dark.  Is your phone setup with Vibrating Alert set to on?  Maybe the act of vibrating is causing it to dim the audio?
    E71-2 Grey Steel
    type: RM-357 code: 0569371 FW: 410.21.010
    08-02-2010 Nokia E71-2 (236.06)

  • Iphone6 ios 8.0.2 bluetooth problem

    I have a 2013 Subaru wrx and the iphone6. With my old iphone 4s when i got in and turned on the car it would connect to the bluetooth within a few seconds. Now I have to manually connect every time i start the car. I have tried all the solutions i have found online to no avail. I have reset all the settings restored to factory both phone and car. Deleted my old 4s from the radio and added new iphone6. Also reset nework settings and its still the same. Still have to manually connect. Any body know how to fix this? 

    Hello Mxdad73,
    Welcome to Apple Support Communities.
    It sounds like you’ve done quite a bit of troubleshooting but your iPhone 6 still isn’t pairing with your car stereo automatically. The two articles linked below provide troubleshooting suggestions, which you may not have already tried, that will resolve most Bluetooth issues.
    If you can’t use a Bluetooth accessory or car kit
    iOS: Troubleshooting Bluetooth connections
    I hope this helps,
    -Jason

  • Nokia CK-7W Car Kit won't switch off after switch...

    Hi,
    I have a CK-7W car kit (connected via bluetooth).
    Recently, the car kit has been reconnecting 2 to 3 seconds after switching the engine of the car off. I cannot seem to stop this from happening, even when clearing memory or even disconnecting the car battery for 20 mins.
    Any advice on how to reset the car kit would be helpful.
    Thanks,
    Chris

    Thanks for the response.
    The car kit was installed by a Car Phone Warehouse Nokia approved fitter about 4 years ago The kit has worked really well until recently!
    The contol button doesn't seem to be stuck in and responds as it should to button presses. In terms of the cable being squashed or damaged. Obviously there is a chance, but in actual fact, only an inch is on show before it is hidden behind the dashboard. In this instance I'm not sure what damage might occur since I don't know how to remove the dash!
    Apologies, I'm not certain I understand your comment re:
      -  "You can rule out the button by disconnecting it then starting the car and connecting, before switching off the car to see if the kit shuts down."
    How do I disconnect the button? Does it pull away from the lead / cable?
    Many, many thanks for your help,
    Chris

  • Help with a E50 and a Audi Car Kit

    Hi
    Have used Nokia for many years and for teh past 2 have used a Nokia 8800 with my Audi Car kit, never had any problems before because I culd choose to use the contacts on my SIM card, on the E50 I cannot do this, Have gone through teh SIM access profile to no avail. I can still use the car kit but cannot scroll through my contacts via the steering wheel.
    Please help!!!!!!!
    Steve

    public class MyServlet  extends HttpServlet {
         public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
              response.setContentType("text/html");
              PrintWriter out = response.getWriter();
              Connection conn = null;
              String Form1a = request.getParameter("Form1");
              String Form2a = request.getParameter("Form2");
              // do all your database stuff
              // if Form1a and Form2a are valid values
                    MyBean bean = new MyBean(Form1a, Form2a);
              request.setAttribute("valid", bean);
       class MyBean{
               private String form1;
         private String form2;
         public MyBean(String form1, String form2) {
              this.form1 = form1;///////////////////////////////////
              this.form2 = form2;//////////////////////////////////
         public String getForm1() {
              return form1;
         public String getForm2() {
              return form2;
         public void setForm1(String form1) {
              this.form1 = form1;
         public void setForm2(String form2) {
              this.form2 = form2;
    NB: you can also declare your bean in a separate java file. In this case, you have to add public to your class definition : public class MyBean ...A servlet has a log method to display messages :
    http://java.sun.com/products/servlet/2.2/javadoc/javax/servlet/GenericServlet.html#log(java.lang.String)
    hth

  • Connecting 6822 to TomTom via Nokia car kit

    I am trying to connect my handset to my TomTom sat nav and can get the two units to connect via Bluetooth, but not if the handset is in the holster, when the Bluetooth connection does not work.
    At a guess, the holster/car kit is not Bluetooth enabled but can anyone confirm this? If so, is my only option to replace the holster?
    Thanks in anticipation.

    15-Jul-200707:41 PM
    iano1966 wrote:
    i have a saab 93 with a nokia car kit fitted.
    i was using a 6230i but have replaced it with a e65.
    i bought a brodit holder as the e65 would not fit in the old holder(mbc-15s).the cable attaches and the phone shows as been attached to the car and it even charges, but when i use the phone the sound does not come out via the speaker system as before and i cant use the roof microphone neither.
    As soon i re-attach the 6230i the car kit works fully again, including the mic/ speakers.
    I am doing something wrong?............any ideas please?
    I don't drive so I'm going to ask probably what seems like a stupid question to you ....
    Are you using a cable or Bluetooth to connect to the in car kit ?
    If you're using Bluetooth then chances are the system you're currently using is incompatible with the E65 at the moment as the E65 wasn't around when the 6230i was created The good news however is that a fix MAY be available if the vendor has updated the firmware to resolve this.
    If you're using a cable then I would check to see if there's a new cable for use with the E65. According to Nokia you can use the same cable (CA-53) to connect to both the 6230i and the E65 - but that is for phone to PC. Your cable *MAY* be slightly different.
    Regards,
    Edward

  • IPhone G3 S with built in BlueTooth car Kit problem

    I have an iPhone 3Gs.
    When I connect to my car kit (Motorola T605) the kit always falls back into music mode.Tthe phone works in this mode but when I use either the iPod feature or a GPS navigation app I get no sound through the car.
    It worked perfectly with my older iPhone with 2.2.1.
    Any ideas as to what is wrong or what I can do to rectify the problem ?
    Do any of you have car kits that work fully with the iPhone 3G s that you can recommend .. It looks like I might have to change my car kit.
    I have updated my 2.2.1 3G phone .... The same problems exist. It seems to be a version 3.0 software issue to me.

    Hi Tim,
    I have just spent 2 hours on the phone with Motorola's tech support (They were useless at best !!!). I got nowhere at all. They blame all the problems all on Apple and say their kit is NOT guaranteed to work with all phones with A2DP. I wish they said that in their sales literature and i told them that .. they seemed to be unable to accept the idea that their saying it works in writing is somewhat misleading (Wrong in this case) and perhaps even a breach of sales law.
    I then spent over an hour at my local (and very experienced) car audio store. they were more than helpful but they also could not get things working correctly.
    I do have a Sony car stereo system and this has a lead for an iPod to play through the stereo system.
    I connected my iPhone to this ... it worked .. sort of ! .. I had to play around a bit .. I managed to get Audio to work and my navigation App (Navigon Europe) worked this way also.
    The store then played around with a Parrot MKi9100 car kit that they had on a demonstration stand.. This was significantly better and I am having my motorola T605 removed and disposed of in disgust tomorrow and the Parrot installed.
    The Parrot will also charge the iPhone via it's cable unlike the Motorola and Sony setup.
    I did speak to Parrot themselves and they have said to me that any of their models in the MKi range will be fine with the iPhone with version 3.0 software as they have done software updates .. The updates can be applied by the owners simply and quickly.
    Just for information for you and others with similar problems ... We also tried several car stereo systems that say they have bluetooth and iPhone compatibility built in to them .. Alpine in particular ... Not one worked !!!
    The Parrot is being fitted as I said earlier tomorrow ... I will make a further report when it's all done to let you know just how good it is and how everything works.
    I hope this helps.

  • N8 Bluetooth car kit problem

    After some tests and research, it seems that:
    - N8 don't sync phonebook with the most recent Audi and BMW built-in Bluetooth car kits (but seems to work with some Mercedes models).
    - The antenna signal communication doesn't work either.
    - Some times (about 1 out of 3) the answer of an incoming call is not handled correctly by the BT car kit.
    - Just phone pairing and basic call handling is working.
    The same Audi and BMW Bluetooth car kits are working fine with the N97 (including phonebook synchronizing, recent call handling and antenna signal).
    In this situation the N8 is almost unusable safely by car!
    Does anyone have some advice?
    Is this a known problem from Nokia? Is it planed of being solved in a next firmware?

    There also Problems with Parrot MKI9200.
    After ending the conversation with incoming calls and pressing red button the N8 starts streaming music buy it self thru the Parrot. If you call out this never happens.
    And there is problem handling music streaming playback with the Parrot + N8.
    Speak and contacts works like it should.
    Toyota RAV 2010 BT HF you can pair it but you can't talk thru it.
    Older BT headset does the same you pair it but no sound.
    So I think N8 has problems with older Bluetooth devices.
    All Car brand has problems with many phones so it´s no 100% solution.
    Better to go the old way = Buy the BT car solution from the same brand as the phone
    and you get a solution from the same decade.
    And skip the old **bleep** the carbuilders is building in the most cars that has a development
    time for about 5-8years that worked good with the Nokia 6233.....
    Use the Nokia CK-200 work like a glove!
    But buy the extra external mic the build in is just built in...
    Kads

  • 1.1.3 and Parrot Bluetooth car kit problems and solution

    I've discovered a potential fix with help from the good folks at Parrot Bluetooth devices technical support. The main issue with version 1.1.3 upgrade and car kits appears to be when the iPhone attempts to sync contacts with the BT device. Apparently, something changed in 1.1.3 about how Apple sent contacts through BT. To fix it on a Parrot car kit, first delete the iPhone from the list of paired devices on the car kit. Then unpair the car kit on the iPhone. Pair the two devices following your devices instructions, only with contact synchronization disabled. On my 3200LS this meant selecting "Disable Synchro" from the phone pairing list. The connection was quick and rock solid after doing this.
    I have seen reports of this same solution working with Ford Sync devices also, and it may address some of the Garmin issues too. Obviously, this isn't ideal since you won't have any contacts or at least will have to manually enter them on your device. But it should get you through until Apple devises a fix in a near future (hint Apple) upgrade.

    Klash,
    Try updating to iPhone 1.1.4, and see if your issue is resolved.
    Hope this helps,
    Nathan C.

  • Car Kit problem with 6680

    Can anybody please assist me!
    I have a CK-7W car kit which I have been successfully using until recently with a 6230i. Last week my phone was upgraded to a 6680 and was supplied through work with the CR-27 cradle. However, when this is connected to the existing cradle connector, I get the message 'enhancement not supported' on the phone.
    Any suggestions?Message Edited by phill_a on 15-Jan-2006
    09:48 AM

    Ok.
    I have now tried the CK-7W with my wife's Nokia 6100, just using the pop-port cable and it has similar problems;
    1. It thinks it is connected to a headset, not a car kit.
    2. The radio stays on "phone" mode.
    I didn't actually try making a call on it, but it seems odd that the problems are similar with another phone.
    With my 6680 and the CK-7W, the phone works fine via bluetooth, but again, thinks it is connected to a headset, not a car kit.
    When I connect through the pop-port cradle (CR-27) the radio stays on "phone" mode and the phone thinks it is connected to a headset. If I try to make a call, the sound is terrible, with loads of echo and feedback.
    Also, while I can "see" my HDW-2, I am unable to actually pair with it.
    What do I do?
    I have bought the genuine Nokia accessories, and this phone seems unable to work with them. Plus the CK-7W seem unable to connect to either my 6680 or 6100 via pop-port.
    What can be the problem?
    I am really annoyed with what is supposed to be a high quality product.
    Perhaps someone will respond?
    6300 - E65 - CK-7W - CK-15W - LD-3W - BH-200 - TT6

  • Alltel 8130 and Nissan Bluetooth Car Kit

    HELP!!! New Nissan Altima with Bluetooth Car Kit.  I am able to pair no problem, make and receive call without a hitch.  Downloaded phone book with ease.  The problem is whenever I use the phone with the car kit after I exit the car the phone locks up, keys do not respond and I have to do a battery pull to reset the phone.  No problem until I use the phone in the car again (with the bluetooth kit).  Any help or suggestions are appreciated.  I do have the latest OS (4.5.0.89).
    Solved!
    Go to Solution.

    Problem Solved: I went to Alltel store and they adviced I do a manual disconnect from the phone before I turn off the car, this seemed to work so since I placed ther Bluetooth icon on the frontpage of my phone it seems to be working fine without having to manually disconnect.  I do not quite understand why it works now but it does.

  • BB Z10 can`t connect to my bluetooth hans free car kit

    I was reading a lot of forums, web pages, etc... and i cant find the anwers to my problem...
    I bought a new Z10 and i cant connect to my car via bluetooth.. I have a Audi Kufatec Fiscon Car kit, integrate with the radio and with the multifuncional sterling wheel ...
    I have the last version of OS 10 (10.1.0.273) 
    Any advice will be apreciate...
    Thank You

    This might help
    http://nickscarblog.com/diy/fiscon-bluetooth-retrofit-audi-a4s4-with-rns-e/
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Bluetooth car kit connectivity issue after IOS 8.1.2 update

    After the IOS 8.1.2 update I cannot connect my IPhone with the Bluetooth car kit (hands free) system of my car.
    Before the update connectivity was perfect, after the IOS 8.1.2 update the car kit does not find the IPhone any longer.
    To solve this issue I deleted both the car kit and the IPhone from the paired devices list of both (my car and the Iphone) and tried to pair them again - no success. The car kit just does not finds the Iphone any longer.
    Please, help!!!

    Just to share the way I finally solved the problem - might be helpful to somebody else.
    I didn't noticed before that the IOS 8.1.2 update changed automatically the name of my Iphone from the one I've given to it before to just "Phone".
    I re-named the Iphone (just gave a new name to it by going to Settings -> General -> About -> Name) and then the car kit managed to find the phone very quickly via Bluetooth.

  • E65 and AUDI A6 MMI Bluetooth Car Kit

    I am absolutely amazed at Nokia's unwillingness to consider close cooperation with major car manufacturers i.e. in my case AUDI.
    Having changed to a Business Phone from a SONY ERICSSON, i now find that the BT functionality is close to useless when compared with the Sony Protocols.
    It is time that NOKIA lived up to their tagline of connecting people and did something about maximising the functionality of the BT Car Kits out there rather than sending out the typical response of "please contact your 3rd party kit provider for configuration issues"
    Come on Nokia, you can do better and will be well served to do so . With all of the legislation in place on use of phones in cars, a lack of commitment to the market will loose customers and loose Nokia Market Share!

    Are you by any chance a vodafone customer? If so the vodafone software has been causing a lot of problems with bluetooth.
    If not then it is likely a compatibilty issue. My E65 has worked perfectly with every headset, kit and dongle that I've tried it with.
    It could also be a faulty phone.Message Edited by psychomania on 07-Jun-200703:13 PM

Maybe you are looking for

  • Trying to convert to word. Half the text is missing and all the pictures. Please help ASAP

    Need help converting to word. Not showing text or images

  • Custom icon settings ignored in taskbar

    I added custom icons for Chromium and Gimp to my custom icon theme, but even if the custom icons are correctly shown in menus and short links, after I launch one of these programs the default icon is shown instead of the custom one into the taskbar.

  • Servce tax and cess on freight

    Dear gurus,    let me know is there any configuration for the provision of service tax & cess on freight.where we maintain . regards ravikanth

  • Web Dynpro for ABAP  Documentation

    Hi Guys, Basically Iam an ABAP consultant. Now I have to start working on ABAP WEB DYNPRO. Could some one suggest me the best Document to start with or if any one has one available Could you pls pls share it with me. My email ID is [email protected]

  • Unable to find configuration file: jdk.conf

    When i try to use sqldeveloper in lunix show this error Unable to find configuration file: jdk.conf Working directory is /u02/sqldeveloper/jdev/bin Exception in thread "main" java.lang.NoClassDefFoundError: java/lang/StringBuilder at oracle.ide.perfo