Adv or BW report over abap report,Abt aggr,Abt error DTP

Hi experts
Please
1can anybody say the advantages of BW report compared to ABAP report.
2. while creating aggregates,IF we choose "Generate proposal" button .How and wht basis teh system will create aggregate.
3.What is Error DTP in BI 7.
Thanks in advance
I will reward points
pradeep

Hi Pradeep
Main diffrence is BW works on multidimentional model or using OLAP for data stagging
and r3 works on OLTP.
BW reports seams like R3 ALV reports but BW reports are advance and used by higher management persons who want there data suddenly .
BW reports took data from diffrent diffrent tools and generate very user friendly reports such as DB connect UD connect and Flat file .
basically BW reports used for alalysis purpose for quick dission in R3 report u cannot see past data but in bw report u can easly pull data from r3 and stored it into cube for future use its main point .
Aggrigate : Thes are used for performance after using aggrigate your query performance incress there are 3 thyes of aggrigate and those aggrigate play main role in performance issues,
DTP are used for data stagging in BW3.5 its done by PSA ..
Assign Points if its helpful
Thanks
Ankit

Similar Messages

Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi - [.....] - RTBUIP_Build_Invoke.vi.ProxyCaller

Hi all,
I am on a field campaign with my Labview-controlled instrument. I wanted to make a small change to the code and build it again for uploading to a cFP-2020 Fieldpoint but the application builder stopped with the following error message:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> ABAPI Get Settings From File.vi -> RTBEP_Invoke_Build_Engine.vi -> RTBUIP_Build_Invoke.vi -> RTBUIP_Build_Invoke.vi.ProxyCaller
This is another computer than the one I used in the lab previously so might have forgotten to install something. I just copied the whole application folder with project file and subfolders
to the Laptop I am using now. Labview version should be the same though (8.20).
Any suggestions?
Olaf

Hello Olaf,
This error is usually found when a subVI or a support file (DLL, custom control, etc)
isn't able to be found by the application builder. Possible reasons
for this could include subVIs no longer located in their original
paths and in need to be relinked, a DLL that isn't included in the build,
and many other possibilities.
You wrote that you copied the project from another PC, so it is very possible that some file went missing. Are all VIs in your project executable?
You could try to mass compile all the VIs in your project and see if that helps.
Regards,
Johannes
AE, NI Germany

How to resolve "Internal error: ABAP Report cannot be loaded" error

Hi All,
I am new to SAP.Please help me out from this problem.
When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps.
In transaction ST22 it shows this dump something like this
Runtime Errors         MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
    1 FUNCTION AC_SYSTEM_FLUSH .
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *" IMPORTING
    5 *"     VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL
    6 *" EXCEPTIONS
    7 *"      CNTL_SYSTEM_ERROR
    8 *"      CNTL_ERROR
    9 *"----
   10   data: sysubrc like sy-subrc.
   11
   12   CALL FUNCTION 'AC_FLUSH_CALL'
   13        EXPORTING
   14             SYSTEM_FLUSH = 'X'
   15             CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
   16        IMPORTING
   17             MESSAGE_NR   = sysubrc
   18             MESSAGE_TEXT = SY-MSGLI.
   19
   20   sy-subrc = sysubrc.
   21
   22   CASE SY-SUBRC.
   23     WHEN 0.
   24     WHEN 1.
   25 *     system_error
   26       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
   27     WHEN 2.
   28 *     method_call_error
>>>>>       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   30     WHEN 3.
   31 *     property_set_error
   32       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   33     WHEN 4.
   34 *     property_get_error
   35       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   36     WHEN OTHERS.
   37       RAISE CNTL_ERROR.
   38   ENDCASE.
   39
   40 ENDFUNCTION.
Thanks in advance
Sunil Choudhury

Hi Sunil,
The reason for this could be anything, anyways look up for an OSS note with the error message first.
As a workaround, you can try to use the classic debugger instead of the new ABAP debugger and see if it works.
You should be logged into SAP via SAP GUI when you are debugging BSP.
Regards
Chen

Maximum report processing jobs limit error on compile

I have been creating an VB.NET application using VS 2005.NET Pro. I believe the version of Crystal reports is 10.0 - I think. I got the following error when I created a new report and then compiled:
Error     1     Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = System.Exception: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80041016): The maximum report processing jobs limit configured by your system administrator has been reached.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
   at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"     J:\Development\ElkRunItWorking\WholesaleReportingSys\Trunk\WholesalerReporting\rptSalesSalesmanProductMonth.rpt     1     1     WholesalerReporting
I have looked at several threads with this error already, but they seem to be having the error when the app is running. I am just compiling and I get this error. Now, counted the number of reports I have created and it is 15. 16 reports seems to trigger this error. What is going on and what should I do? Thanks in advance.
Ed Cohen

One more thing, I do not have this in my registry:
HKEY_LOCAL_MACHINE\SOFTWARE\CRYSTAL DECISIONS\*10.2*\REPORT APPLICATION SERVER\SERVER\PrintJobLimit
I have looked all over the place it PrintJobLimit does not exist. Again, I am using Visual Studio.NET 2005 Pro on a Windows XP Pro machine. Thanks again.
Ed Cohen

VISA - unable to queue operation & device reported an input protocol error.

To summarise I have two main questions:
How can I clear the VISA operation queue and what causes an input protocol error during transfer?
I am using a Tektronix AFG3022B Function Generator with latest firmware connected via USB and LabVIEW 2013 SP1 patch 2 (13.0.1f2) 32bit with NI-VISA 5.4.1.
If I have a small timeout, say 100ms, and perform a save operation and op complete query on the device (*SAV 1;OPC?), then do up to 10 VISA reads; the first few reads time out (as expected), but then I frequently get the following error:
-1073807305 (0xBFFF0037) VI_ERROR_INP_PROT_VIOL. "Device reported an input protocol error during transfer."
Once this occurs, the whole VISA session seems to become unstable and lots of the read operations fail returing this error code and not the timeout error (0xBFFF0015 (VI_ERROR_TMO)).
This only seems to happen when I do save/recall operations (either internal or to a mass storage device connected to the instrument), all other commands/queries timeout for the first few reads (as expected) then return the value. Do you think this is probably down to poor instrument firmware/hardware? Or am I using the VISA incorrectly? I would have thought that attempting to read VISA data to soon should only generate a timeout error and not a protocol error.
Reason for small timeouts:
Instead of setting the timeout to 4 seconds and having no way of cancelling the read operation I set the timeout to 100ms and run a for loop up to 40 times ignoring timout errors unless it's the last loop iteration. This means I can the operation within ~100ms.
What causes the VISA protocol error? I can't find much information on it.
Once the protocol error occurs and I keep repeating the *SAV command, I get the following error:
-1073807303 (0xBFFF0039) VI_ERROR_IN_PROGRESS. "Unable to queue the asynchronous operation because there is already an operation in progress."
Once this error occurs, how can I force a clear on the VISA queue without unplugging/power cycling the instrument?
Some NI I/O trace captures attached to show what happens and test VI.
Using LV2014 SP1
Attachments:
VISA problems.zip ‏38 KB

I thought I would try to duplicate your problems, but I only have a Tektronix TDS Scope that has USB.
I am a big fan of using *OCP? to sync instruments control and your problem is of interest to me
This very simple write/read returns the *OPC '1' return char consistently between 175-185 ms. No problem
Trying your short timeout with a loop, I do not get what I or you expected.
If I run this with an adequate timeout (something well longer than the needed 185 ms) it returns in between 175-185 ms with one time through the for loop. As expected. No problem.
BUT! If I try setting the timeout to something below the needed 175 ms like your 100ms...
Sometimes it works but it takes over 2000 ms to return but only goes though the for loop twice.
But sometime it does not work at all, taking well over 10 sec to exit out of the for loop with a timeout error.
I never see the queue error that you are seeing
How long does it take to do a simple *SAV
I don’t think the queue error is coming from the instrument. You would have to send the instruments the SYSTEM:ERROR? Request before the instrument would report any of the instruments errors.
Be sure to set your Termination Char setting. I prefer to turn it off for the Writes so I control when to send it. But turn it on for the Reads
Also I noticed from your trace files that you use the *OPC? after a *IDN?. This is not needed as you will know the *IDN? is complete when your received the string back. In fact my Tektronix scope did not like it if I sent it "*IDN?;*OPC?\n". It would not send me anything back, not even the IDN.
Is the SAV command on your instrument so long that you need to be able to break out of the loop?
Omar

Performance issue in Report (getting time out error)

Hi experts,
I am doing Performance for a Report (getting time out error)
Please see the code below and .
while looping internal table IVBAP after 25 minutes its showing time out error at this poit ->
SELECT MAX( ERDAT ) .
please send alternate code for this .
Advance thanks
from
Nagendra
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
   INTO CORRESPONDING FIELDS OF TABLE IVBAP
     FOR ALL ENTRIES IN IVBAK
       WHERE VBELN = IVBAK-VBELN
       AND   MATNR IN Z_MATNR
       AND   WERKS IN Z_WERKS
       AND   ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
         WK_BLOCK, WK_MMSTA, WK_MSTAE.
LOOP AT IVBAP.
      CLEAR WK_INVDATE.                                   "I6677.sn
      SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
      AUBEL EQ IVBAP-VBELN AND
      AUPOS EQ IVBAP-POSNR.
      IF SY-SUBRC = 0.
          MOVE WK_INVDATE TO IVBAP-INVDT.
          MODIFY IVBAP.
      ENDIF.                                               "I6677.e n
      SELECT SINGLE * FROM MBEW WHERE             "I6759.sn
      MATNR EQ IVBAP-MATNR AND
      BWKEY EQ IVBAP-WERKS AND
      BWTAR EQ SPACE.
      IF SY-SUBRC = 0.
         MOVE MBEW-STPRS TO IVBAP-STPRS.
         IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
         MODIFY IVBAP.
      ENDIF.                                      "I6759.en
    IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
      CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
      MOVE IVBAP-MATNR TO WK_MATNR.
      MOVE IVBAP-WERKS TO WK_WERKS.
      SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
        WHERE MATNR = WK_MATNR
        AND   WERKS = WK_WERKS.
      IF NOT MARC-MMSTA IS INITIAL.
        MOVE '*' TO WK_MMSTA.
      ENDIF.
      SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
        INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
        WHERE MATNR = WK_MATNR.
      IF ( NOT MARA-MSTAE IS INITIAL ) OR
         ( NOT MARA-MSTAV IS INITIAL ) OR
         ( NOT MARA-LVORM IS INITIAL ).
         MOVE '*' TO WK_MSTAE.
      ENDIF.
      MOVE MARA-PRDHA TO WK_PRDHA.
      SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
        WHERE MATNR = WK_MATNR
          AND SPRAS = SY-LANGU.
    ENDIF.
    IF Z_BLOCK EQ 'B'.
      IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
        DELETE IVBAP.
        CONTINUE.
      ENDIF.
    ELSEIF Z_BLOCK EQ 'U'.
      IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
        DELETE IVBAP.
        CONTINUE.
      ENDIF.
    ELSE.
      IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
        MOVE '*' TO WK_BLOCK.
      ENDIF.
    ENDIF.
    IF WK_PRDHA IN Z_PRDHA.                                    "I4792
      MOVE WK_BLOCK TO IVBAP-BLOCK.
      MOVE WK_PRDHA TO IVBAP-PRDHA.
      MOVE WK_MAKTX TO IVBAP-MAKTX.
      MODIFY IVBAP.
    ELSE.                                                     "I4792
      DELETE IVBAP.                                           "I4792
    ENDIF.                                                    "I4792
    IF NOT Z_ALNUM[] IS INITIAL.                              "I9076
      SELECT SINGLE * FROM MAEX                               "I9076
        WHERE MATNR = IVBAP-MATNR                             "I9076
          AND ALNUM IN Z_ALNUM.                               "I9076
      IF SY-SUBRC <> 0.                                       "I9076
        DELETE IVBAP.                                         "I9076
      ENDIF.                                                  "I9076
    ENDIF.                                                    "I9076
ENDLOOP.

Hi Nagendra!
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
check ivbak is not initial
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
avoid select widin loop. instead do selection outside loop.u can use read statement......and then loop if required.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
endloop.
U have used many select queries widin loop-endloop which is a big hindrance as far as performance is concerned.Avoid such practice.
Thanks
Deepika

Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL

Hi all,
We just upgraded SAP from 8.82 PL02 to 8.82 PL15.
Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach.
Before the upgrade this error did not happen.
No permissions or authorizations were changed in the workstation.
The Crystal Reports layouts remain working fine in server and in the other workstations.
In the workstation following are installed:
- Operating System Windows 7;
- Microsoft .NET Framework 4.5;
- SAP Crystal Reports runtime engine for. NET Framework;
- Crystal Report 2008 Runtime SP6;
- Microsoft SQL Server 2008 R2 Native Client.
All, but the operating system, are equal to the other workstations.
User has edit access to SAP folders, temp and access to the attach path.
We already uninstalled SAP client and client agent and re-installed it but with no avail.
Can anyone help me?
Thanks in advance.
Best regards,
Pedro Mariano

Hi San Xu,
Thank you for your input.
However I'm facing problem with each software is suitable.
I installed SAP Crystal Reports for SAP Business One (CR 2011 V14.0.4.738), but with no avail.
Thanks in advance.
Best regards,
Pedro Mariano

XML Report Publisher program is erroring out

Hi All,
I've customized the AR Customer Statements.
I've created a data definition as "ARXSGP" and uploded the sample_output.xml of Statement Generation Program to it. Also I've created a Data template as "ARXSGPO" and attached the data definition "ARXSGP" to it and uploaded the customized rtf file "XXHCC_CLE_F_ARCUSBALSL.rtf" and set the default output type to PDF.
As I donot wish to call the XML Report Publisher program manually every time when I Print the Statements through Print Documents-->Statements.
So I've done the below customization in ARXSGP.rdf file ie; Print Statements Report which is an Oracle Report.
I've added the below code in After Report trigger.
=======================================
FUNCTION AfterReport
RETURN BOOLEAN
IS
BEGIN
Below code added for Customer Statement Case Study
DECLARE
l_req_id NUMBER := 0;
L_XML_LAYOUT BOOLEAN := TRUE;
BEGIN
L_XML_LAYOUT := FND_REQUEST.ADD_LAYOUT (TEMPLATE_APPL_NAME => 'AR', TEMPLATE_CODE => 'ARXSGP', TEMPLATE_LANGUAGE => 'en', TEMPLATE_TERRITORY => 'US', OUTPUT_FORMAT => 'PDF');
IF L_XML_LAYOUT THEN
srw.message(20001, 'Template is picked ');
srw.message(20002,'Concurrent request Id : '||:p_conc_request_id);
l_req_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
'XDOREPPB',
NULL,
NULL,
FALSE,
:p_conc_request_id,
222, -- Receivables
'ARXSGPO', -- Statement Generate
'en-US', -- English
'N',
'RTF',
'PDF');
IF l_req_id > 0 THEN
COMMIT;
ELSE
srw.message(20004, 'Failed to submit request');
END IF;
ELSE -- Not L_XML_LAYOUT
srw.message(20005, 'Template is not picked ');
END IF;
END;
--------------------Code Ends----------------------------
SRW.USER_EXIT('FND SRWEXIT');
RETURN (TRUE);
END;
==============================================
After Printing the Statements through Print Documents-->Statements
Statement Generation Program is being called and later XML Report Publisher program is also being invoked.
But the XML Report Publisher Program is erroring out with below error.
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOREPPB module: XML Report Publisher
Current system time is 03-SEP-2012 17:42:18
Oracle XML Publisher 5.6.3
java.lang.NumberFormatException: For input string: "ARXSGPO"
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:447)
     at java.lang.Integer.parseInt(Integer.java:497)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:215)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PUBLISH -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-SEP-2012 17:42:22
Please help out with a solution.
Thanks,
Tech D

for r12 add one row for parameter "Dummy for Data Security" from desc of XDOREPPB
follow works for me
SQL> set serveroutput on
SQL>
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'N', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888651
successfully submitted.
PL/SQL procedure successfully completed
SQL> 'Y' for "Dummy for Data Security" also works for me
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'Y', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888652
successfully submitted.
PL/SQL procedure successfully completed
SQL>

Crystal report add on installation error

Hi ,
While starting the crystal report addon following the error is coming--> retrieving the COM class factory component with CLSID{3EBB7859-E4 E3-4D77-B ,our operting system -- windows 2003 server-- 64 bit ,
Regards
Naresh K

Hi Naresh,
You can find more information on the thread:
SAP Business One and Crystal Reports
There are quite few threads in 10 pages for Crystal Reports. You may post it there too.
Thanks,
Gordon

Adding a Subreport to existing report and getting this error, "Unable to connect: incorrect log on parameters"

I have taken on an existing vb.net project done in Visual Studio 2008 with crystal reports version Crystal Report XI.
The reports on their own work very well. Problem is I need to add information to my report which is a 'many-to-one' situation where for each Project Id that I am displaying I need to display several attached documents and the report I am working on is for several Project Id's.
I figured this would be a perfect situation for a SubReport. I created a separate report which calls a stored procedure to get all of the Attached Documents for a specific Project Id. I thought if I were to add this new SubReport to the Original Report and link the Project Id's, easy-peazy, I would be done.
This is not the case. I have vb code that loads the Original Report with a stored procedure and when this code runs with the setup I described above it fails when it is creating the final report with the following error:
Logon failed. Details: crdb_adoplus : Object reference not set to an instance of an object. Error in File C:\~\ProjectDescriptionReport {6BA19F79-2A12-4826-B1F6-456EF799963B}.rpt: Unable to connect: incorrect log on parameters.
I have no specific connections in my vb code for the reports. If I do not add the subreport to the main report, it loads correctly, so I know the error is caused by the subreport.
This is the code that creates the original report (sorry for dumping the code here, i just thought it would be easier to see all the code) :
Public Function LoadReport(ByVal inProjectNum As Integer, ByVal strProjectName As String) As DataTable ', ByVal inFiscalYear As Integer, ByVal inCompany As String) As DataTable
        Dim cnn As SqlConnection = Nothing
        Dim cmd As Data.SqlClient.SqlCommand
        Dim obj As New clsDataClass
        Dim dataAdapter As SqlClient.SqlDataAdapter
        Try
            LoadReport = New DataTable("DescriptionReport")
            cmd = New SqlCommand()
            cnn = obj.Create_Connection()
            With cmd
                .CommandType = Data.CommandType.StoredProcedure
                .Connection = cnn
                .CommandTimeout = "60"
                .CommandText = "usp_GetProjectGroupSpecsCR"
                .Parameters.AddWithValue("@ProjectNumber", inProjectNum)
                .Parameters.AddWithValue("@ProjectName", strProjectName)
            End With
            dataAdapter = New System.Data.SqlClient.SqlDataAdapter
            dataAdapter.SelectCommand = cmd
            dataAdapter.Fill(LoadReport)
            Dim oRpt As New ReportDocument()
            oRpt.Load(Server.MapPath("ProjectDescriptionReport.rpt"))
            oRpt.Refresh()
            oRpt.SetDataSource(LoadReport)
            'oRpt.OpenSubreport("AttachmentsReport").SetDataSource(LAR)
            oRpt.SetParameterValue("inProjectNum", inProjectNum)
            oRpt.SetParameterValue("strProjectName", strProjectName)
            oRpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, True, "Projects_DescriptionReport") 'inCompany & "ProjectsReport_Description" & inFiscalYear) <-- Line where the error occures.
What I need to know is what is the proper way to add a subreport to a vb.net application?
From the ways I have tried it is clearly not working and I am out of ideas. I am fairly new to Crystal Reports and this way of coding it.
Any help for this would be greatly appreciated, I've been stuck on this for a while and am finally reaching out to the Crystal Report Specialists.
Thank you in advance,
Bryan

Hi Bryan,
You may want to check the Connection properties also. I think the MS Data.SqlClient.SqlCommand is using the MDAC driver, or could be modified.
If you are connecting to SQL Server 2008 or above you should be using the SQL Native 10 or 11 Client.
As Dell suggests have a look at the samples and if you can use a DSN ( 32 bit or 64 bit ODBC Admin )
Also search for "CRlogger", you'll find how to enable CR's database logging component and may help show you what part is failing.
Don

SSRS VB Code error while deploying report -- There is an error on line 5 of custom code: [BC30201] Expression expected._

Function MakeList(ByVal items As Object()) As String
If items Is Nothing Then
Return Nothing
END if
Dim builder As System.Text.StringBuilder =
New System.Text.StringBuilder()
builder.Append("<div>")
For Each item As Object In items
builder.Append("<div <ul>")
builder.Append(item)
builder.Append("</ul>")
Next
builder.Append("</div>")
Return builder.ToString()
End Function
Function Length(ByVal items as Object()) as Integer
If items is Nothing Then
Return 0
End If
Return items.Length
End Function

Hi Wintersbay,
According to your description, when you use the custom code in SSRS report, you got the error message.
To solve the problem, please refer to the custom code below:
Function MakeList(ByVal items As Object) As String
If items Is Nothing Then
Return Nothing
END if
Dim builder As System.Text.StringBuilder =
New System.Text.StringBuilder()
builder.Append("<div>")
For Each item As Object In items
builder.Append("<div <ul>")
builder.Append(item)
builder.Append("</ul>")
Next
builder.Append("</div>")
Return builder.ToString()
End Function
Function Length(ByVal items as Object) as Integer
If items is Nothing Then
Return 0
End If
Return items.Length
End Function
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Report service Integration (sql 2012 and SharePoint 2013) error Report Server WMI Provider error: Invalid namespace

Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.

Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Financial Reporting Studio has overflow error when opening any report

Hello everyone!
I faced with problem in FR Studio. When I try open any report is appears an error "Overflow". In others machines this error is not appears.
Version of FR Studio: 11.1.2.757
Many thanks for your advices!

Uninstall CRVS2010 that you currently have installed.
To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325 - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
Reinstall CRVS2010 SP1 from here:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
- Ludek

Disk Utility is reporting a fatal hardware error-S.M.A.R.T. status failing. Is there hope?

OS 10.5.8 on a 1.8 GHz Power PC G5. Installed Western Digital WD1002FAEX as a second internal hard drive. I also installd the jumper needed to slow HD down for this computer. Initialized and formated the HD was able to back up a large iPhoto file and am still able to acceass the file from the new HD. Now Disk Utility is reporting a fatal hardware error-S.M.A.R.T. status failing. Is there hope?

Is that on your first drive or the new one???
Only experience I had with SMART warning was that in less than 48 hrs it was dead for good.

Error in File (report server\ report.rpt): Database Connector Error

New installation of XI R2 - using Crystal Reports Version 11.5.8.826 for developement against Oracle DB.
Currently have around 20 reports running on XI (need to import ~1500 reports from Crystal Enterprise 10, but waiting to resolve this issue)
Some reports sometimes (not always) get the following error:
Error in File (report server\ report.rpt): Database Connector Error
If the report is re-scheduled, report will sometime run fine and sometimes gets the same error again.
There seems to be no logical way to determine which parameters will cause the report to fail or when.
I'm experiencing the problem on about 3 reports only - All against the same DB and only occassionally. These 20 reports were developed with CR XI and all run against the same Oracle DB.

I've got the same problem- the reports run fine in Crystal, but sometimes (not everytime) they fail in InfoView with "Database Connector Error" message. My report doesn't contain any data, just 8 sets of 4 subreports in different footer sections, which each connect to a different stored procedure. The report is to help with our server checks: we have a set of 4 different stored procedures which run on each of 8 different servers making 32 different SPs and there is a subreport in this report for each.
It does seem to be random whether this problem occurs or not- I have scheduled the report to run regularly (1 recurring instance) and sometime it works, sometimes not, but always the same failure message. I have increased the success rate by allowing the report to re-try on failure, but this does take time, and isn't really curing the problem.
I wonder whether this error could be caused by a delay in one of the SPs returning its data, and the report timing out since no data is being returned. Would anyone know whether this is likely to be the cause, and if so how to fix it? Or any suggestions what else it could be?
Thanks,
Tom

Adv or BW report over abap report,Abt aggr,Abt error DTP

Similar Messages

Maybe you are looking for