Advance bios?

I have the 970 gaming motherboard.
there's "limited" overclocking options. plus other stuff too.
is there an advance bios????? right now I'm not seeing "my genie" settings etc.

You mean OC genie?
what is your bios version and CPU?
Could you list you full spec?

Similar Messages

DEP, M55, Advanced Bios Settings

Thinkcentre M55, Windows XP
Does the M55 use Hardware-enforced DEP?
For some reason DEP can't be disabled or modified from Windows XPs GUI or boot.ini switches.
Boots back to it's default setting of On and OptIn (default configuration) Only Windows system components and services have DEP applied
Also looking for some detailed documentation or articles related to M55's Bios and the advanced bios settings.

Hello Sirald66,
I understand you want to disable wake-on the keyboard, is that correct? I will assist you with this inquiry.
There is not an advanced bios settings available for your current system bios, a possible future upgrade might make it available.
If I understand you correctly on the keyboard issue, you can make those changes in the device manager.
1.       Open device manager, if you are unsure how to get there have a look at this link.
2.       Scroll down to keyboard section.
3.       Click on arrow to the left of keyboard to expand section.
4.       Right click on keyboard, and then go properties.
5.       At the top of the next window go to the power management tab, and the option should be there to uncheck.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Unlocking advanced BIOS features on GT80

Hello!
I am a very happy owner of the GT80, and so far everything works perfectly. I was made aware that you can unlock the advanced BIOS features of this machine, but I don't know how. I would like to try them and see what additional features can be tweaked.
Does anyone know how to unlock those features, like with my original MSI GX660R where you only had to hold Shift+CTRL+ALT+Insert ? hehehehe
I am particularly interested in memory clocks, CPU TDP/controls etc. Thank you!

Yes and no. Power consumption meters show that the GT80 with 4980HQ consumes around 326W total system power under load. That CPU can consume up to 80W on its own, while doing its own turbo. Intel 4720HQ can consume near 60W under same turbo conditions.
Obviously the system can take it, as it can hold this for about a minute until intel self regulates to the TDP of 47W. If we could adjust this to the same values the CPU already consume, like 60W, we could significantly improve long term performance.
If you overclock the GPU's though, that will surely consume more power. But at its current 330W psu, we have alot of headroom for the system to operate how it should without problems.
I wish we could set the TDP at 60W for the CPU. IT is quite limited right now when doing intensive tasks, often power throttling (not due to thermals but 47W tdp) and reducing its speed to 3Ghz, or even lower depending on the load. At 60W, we could maintain 3.6Ghz indefinitely.
Due to the low 47W TDP, there is hardly a difference in performance between any of the core i7 HQ processors, after 1 min of operation at full load.

How to get into advance bios settings tab ?

How can i change the advance settings,power management etc in bios as it is not availeble in BIOS menu. I'm using Insyde bios v3.5.
Model-G560
OS-Windows 8 64bit pro

Hi Levaj,
I’m sorry to hear that the issue persists even after performing the “System Restore” in the computer; the only available option is to perform OSRI (Operating System Re-Install) which will confirm if the issue is Hardware related. To perform OSRI click on OKR (One Key Recovery) button in the computer, below is the link to download the User Guide for the steps to perform OSRI and refer page no. 2 to locate the OKR button and page no. 25 for the steps to perform OKR.
NOTE: Please backup the data in the computer before performing OSRI, as the data will be completely erased.
Lenovo G560 User Guide
If the issue persists even after performing “System Recovery” in the computer, I would Strongly Suggest Calling Technical Support for Assistance. Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps!!!
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

F4 to show advanced bios options not working

Hello, i have a MSI P6N-SLI FI board, with the v27 bios. I'm looking to disable C1E but F4 does not seem to do the trick. I remeber clearly on v25 i think, doing it, but it just dosent want to activate here. Any ideeas?

There is no C1E Option that could be made visible by pressing F4 in BIOS v2.7. It was still part of BIOS v2.6. In v2.7, however, it appears to have been removed.
Hit F4 while you are in the "Integrated Peripherals" Section and you will see that the F4-Function itself still works as a new option should appear.
Why would you want to disable C1E Support anyway?
What makes you think that it isn't already disabled?

Advanced Bios Features

While I am playing Counter-Strike Source I get an error 'Page Fault Found In A Non Paged Area' The blue screen thing. So anyways I went to the steam website and they said for me to disable all BIOS caching options, because XP does not use these caching features at all. But there are like 3 diffrent BIOS cache options and I dont know which to disable.
there is Internal Cache, System BIOS Cacheable and then C000, 32k Shadow.

DONT touch "internal cache", let it enabled!!! (or your computer will run very slow!)
disable both, system bios and c000 32k shadow ! they are useless, coz thought for dos and wont help you (just eat ram)

BIOS Problem with 915P Combo

Hi there...
I have one MB 915P Combo and i have problems in BIOS configuration.
I go to: Advanced BIOS Features / BOOT SEQUENCE
And have one option Boot from other Device, it have No.
I change to Yes, and reboot and now it is possible to use pen disks.
The problem:
If i install a program and at the end of installation (for example update IDE/Raid utility) it is necessary to reboot windows , i restart the windows and when go to windows, now is not possible to use pen disks...
To solve the problem temporaly:
It is necessary to go to the BIOS configuration and Change the Boot from other device to "No" and reboot... and Change again to "Yes" to work with Pen disk.
And sometimes appears a blue window in Windows with a Device Driver error.
How to solve the problem ?
I have the latest BIOS 1.6
Thanks.

What if you just normally reboot windows without any new installation? Does it happen the same way?

Y have problem with bios of motherboard K9N2-GM 8200 GE FORCE

y have updated the bios of my motherboard k9N2-GM 8200 nvidia geforce (y have a cpu athlon 64 bit dual core 6000+ 3000 Ghz) and it is missing in Advanced Bios Feature. in the bios, CPU FEATURE the SVM (secure virtual machine) Y have replaced the old bios but the problem is the same thing SVM is missing How do y restore it?

GENERAL INFORMATION
VENDOR NAME AUTHENTIC AMD
CENTRAL PROCESSOR AMD ATHLON (TM)X2 3 GHZ processor
FAMILY 15 MODEL 3 STEPPING 3
EXTENDED INFORMATION
TSC CLOCK 2999,99 MHz QS RATING 6000+
REFERENCE CLOCK 200 MHz HTL SPEED 1000 MHz CLOCK RATIO 15 VOLTAGE 2,040 V L1 DATA CACHE 128 KB L2 CACHE 2048 KB L1 INSTRUCTION CACHE 128 KB
NUMBER OF PHISYCAL CORE 2 HYPER THREADING YES NX TECHNOLOGY YES SSE INSTRUCTIONS YES SSE2 INSTRUCTIONS YES SSE3 INSTRUCTIONS YES POWERNOW! TECHNOLOGY T-Sensor, Frequency ID, Voltage ID
POWER MANAGEMENT FEATURES
THERMAL TRIP YES SEGMENT DESKTOP THERMAL MONITOR YES POWER LIMIT 125 WATT SOFTWARE T-CONTROL YES
Temperature Sensor YES CURRENT POWER 110,57 CURRENT TEMPERATURE 60920
CORE VOLTAGE
DINAMIC CONTROL YES THROTTING DISABLED CURRENT TSC CLOCK 3048,13 MHZ CLOCK RATIO 15,0 STARTUP 1000 Mhz clock ratio 5 maximum 2999,99 MHz clock ratio 15
Thermal Control
Default c1 divisor 8 Auto FID/VID NOT SELECTED
default c2 divisor 8 halt state enabled
Current c1 divisor 32
Current c2 divisor 8 STPGNT DISABLED
ADX6000IAA6CZ PROCESSOR CORE WINDSOR VERSION 5.3 GENERATION 15 VERSION MODEL 3.4 STEPPING 3 PROCESS TECHNOLOGY 0,09 micron SOI DSL REVISION JH-F3 ANNOUNCE DATE DECEMBER 12, 2006[/img]
y hope that it go well

No AHCI in BIOS in Satellite Pro A200

I just installed an ssd and would like to change the bios utility to ahci however there isnt an area that i am able to do this. the Computer is a Toshiba Satellite Pro A200 (psfa1a-003002).
Do I need to update the BIOS? Where do I get the update and how do I update it?

As far as I know BIOS update doesn't offer some additional options. Please check BIOS settings again. In advanced BIOS options there should be SATA option and there you can change between compatibility and AHCI mode.
I have it on my P200. It is almost identical machine but 17 and your is 15 model.

Will not enter bios setup

Every time i hit the F1 key on my HP Pavilion 7965 Desktop I get the HP screen and at the bottom of it, the message "Entering SETUP". However that is as far as it goes. It just seems to freeze and does not enter setup. Does any one knows why and how I can get it to finish entering setup?

Hello darkfant,
Pressing F11 on startup should enter the Advanced BIOS. If you press F11 on boot up does it do the same thing or is it just tied to the normal BIOS?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Need help with bios settings for Neo4 Platinum

Hi. I've checked several guides on bioses and still have questions about my settings. I'm not an overclocker, so I'm looking for stability over anything else (although I don't want my computer to run like a pig . I'll post what I have and the parts of the bios that I'm unsure of. I also have saved pictures of a Cpu-z scan if that helps. Any suggestions are much appreciated!
Here's my stuff:
Motherboard: MSI K8N NEo4 Platinum (MS-7125)
Processor: AMD Athlon 64 3000+ 512K 90nm (Winchester socket 939)
   clock frequency: 1800mhz
   system bus: 2000
   operating mode: 32/64
   voltage: 1.40v
   max temp: 70 degrees C
   thermal power: 89w
   L1 cache: 128KB
   L2 cache: 512KB
   cmos technology: 90nm SOI
   memory controller: 128-bit
Award bios version: 1.9
Installed ram: Micron Crucial Ballistix 512MBx2 (1024MB total) (Crucial
part number BL6464Z402)
   PC3200 400mhz Dual-Channel DDR Dimm (184 pins)
   configuration: 64Meg x 64
   unbuffered/non-ecc
   voltage: 2.8v
   memory timings:   2-2-2-6
Here's my current bios settings (I've only listed sections that contained settings that I was unsure of):
ADVANCED BIOS FEATURES
quick booting: enabled
boot to os/2: no
ioapic function: enabled
mps table version: 1.4
full screen logo display: disabled
seek floppy: enabled
typematic rate setting: enabled
typematic rate: 30
typematic delay: 1000
security option: setup
ADVANCED CHIPSET FEATURES
--->>DRAM CONFIGURATION
timing mode: manual
memclock index value: 200mhz
cas# latency TCL:2
min ras# active time TRAS: 6t
ras# to cas# delay TRCD: 2t
row precharge time TRP: 2t
row to row delay TRRD: auto
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
read-to-write time TRWT:auto
write recovery time TWR:auto
write to read delay: TWTR:auto
refresh period TREF:auto
user config mode: auto
x bottom of 32-bit [31:24] io: D8
x 1t/2t memory timing: 2t
x read preamble value: 8ns
x async latency value: 9ns
s/w memory hole remapping: disabled
mtrr mapping mode: continuous
PNP/PCI CONFIGURATIONS
primary graphic's adapter: first pcie
resources controlled by: auto (escd)
x irq resources setup: press enter
maximum payload size: 4096
CELL MENU
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
high performance mode: manual
aggressive timing: disabled
dynamic overclocking: disabled
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16)
cpu spread spectrum: disabled
sata spread spectrum: disabled
pcie spread spectrum: disabled
pcie clock: 100 mhz
sse/sse2 instructions: enabled
cool'n'quiet: disabled
adjust cpu vid: startup
extra cpu voltage: by cpu vid
cpu voltage 1.400v
memory voltage: auto
nf4 voltage: 1.50v
Thanks again. xpfshost

I'll do that, thanks. I guess I'm really mostly clueless about the following items:
memclock index value: 200mhz
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16
pcie clock: 100 mhz
Do they look OK?? Thanks!
xpfshost
Quote from: Grayone on 19-April-07, 05:13:03
Change your user config mode in dram configuration to manual and change your memory timing to 1T. The 1T setting will speed up your memory slightly.

[VIA] KT3 Ultra2 - - need to "Assign IRQ to VGA" in Bios but how?

G'day people,
I am having a little drama with the instalation of a new video card. The system recoginses a hardware device, and nVidia WDM Video Capture (Universal) bbut after driver install, I get an error This device cannot start (Code 10). The FAQ over at nVidia says that:
The Code 10 error is most often a result of not having the option "Assign IRQ to VGA" enabled in your motherboards system BIOS.
My problem is I cannot find how to enable this option in bios. Any ideas? Just going to reboot and edit this post with the BIOS version.
Okay.....When I enter Bios the info say AMIBIOS vers 3.31a.
Thanks.

Thanks for this help people, I am quite new at this. Only been tinkering for about 5 years.
Quote
That's not the right number, I belive what you are looking at is the American Megatrend version, not the actual BIOS string. It's usually at the bottom of the screen.
The only available BIOS versions are 1.X or 5.X depending on the version of mobo you are using. You need to confirm that first.
Okay how about version 5.5 date is 07/10/02.
Quote
In which slot is the sound card?
Is there a modem involved somewhere?
Did you uninstall the previous card's driver properly? Enter SafeMode to find out.
Okay the sound card is in IRQ17 which it shares with an modem. (???)
Yes I made sure I uninstalled the old graphics card driver before I installed the new one.
Also:
Resource   Share   Device Description
IRQ 16     Shared   Realtek RTL8139 Family PCI Fast Ethernet NIC #2
Resource   Share   Device Description
IRQ 16     Shared   NVIDIA GeForce 6600
Could this be my problem???
Quote
What system are you running in your PC ? Did you enabled APIC Function in Advanced Bios Features ? You have said very few about your PC. so better explain with more detail your hardware ( Memory speed, system etc.)
System?? as in operating system? Win XP Pro. that is is my sig. will check on that APIC.
Extra info.
Field   Value
Motherboard Properties
Motherboard ID   62-0710-009999-00101111-040201-VIA_K7$1AARK204_A6380VMS V5.5 071002
Motherboard Name   MSI KT3 Ultra2 (MS-6380E)
Front Side Bus Properties
Bus Type   DEC Alpha EV6
Bus Width   64-bit
Real Clock   133 MHz (DDR)
Effective Clock   267 MHz
Bandwidth   2133 MB/s
Memory Bus Properties
Bus Type   DDR SDRAM
Bus Width   64-bit
Real Clock   167 MHz (DDR)
Effective Clock   333 MHz
Bandwidth   2666 MB/s
Chipset Bus Properties
Bus Type   VIA V-Link
Bus Width   8-bit
Real Clock   67 MHz (QDR)
Effective Clock   267 MHz
Bandwidth   267 MB/s
Motherboard Physical Info
CPU Sockets/Slots   1
Expansion Slots   5 PCI, 1 AGP, 1 CNR
RAM Slots   3 DIMM
Integrated Devices   Audio
Form Factor   ATX
Motherboard Size   230 mm x 300 mm
Motherboard Chipset   KT333
Extra Features   Fuzzy Logic 4
Motherboard Manufacturer
Company Name   Micro-Star International
Product Information   http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php
BIOS Download   http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php
And memory:
DIMM1
Field   Value
Memory Module Properties
Module Name   Kingmax MPMB62D-68KX3-MBA
Serial Number   None
Module Size   256 MB (2 rows, 4 banks)
Module Type   Unbuffered
Memory Type   DDR SDRAM
Memory Speed   PC2700 (166 MHz)
Module Width   64 bit
Module Voltage   SSTL 2.5
Error Detection Method   None
Refresh Rate   Normal (15.625 us), Self-Refresh
Memory Timings
@ 166 MHz   2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz   2.0-3-3-6 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge   Not Supported
Auto-Precharge   Not Supported
Precharge All   Not Supported
Write1/Read Burst   Not Supported
Buffered Address/Control Inputs   Not Supported
Registered Address/Control Inputs   Not Supported
On-Card PLL (Clock)   Not Supported
Buffered DQMB Inputs   Not Supported
Registered DQMB Inputs   Not Supported
Differential Clock Input   Supported
Redundant Row Address   Not Supported
Memory Module Manufacturer
Company Name   Kingmax Inc.
Product Information   http://www.kingmax.com/product/pro_newp.htm
DIMM 2
Field   Value
Memory Module Properties
Serial Number   None
Module Size   256 MB (1 rows, 4 banks)
Module Type   Unbuffered
Memory Type   DDR SDRAM
Memory Speed   PC2700 (166 MHz)
Module Width   64 bit
Module Voltage   SSTL 2.5
Error Detection Method   None
Refresh Rate   Reduced (7.8 us), Self-Refresh
Memory Timings
@ 166 MHz   2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz   2.0-3-3-6 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge   Not Supported
Auto-Precharge   Not Supported
Precharge All   Not Supported
Write1/Read Burst   Not Supported
Buffered Address/Control Inputs   Not Supported
Registered Address/Control Inputs   Not Supported
On-Card PLL (Clock)   Not Supported
Buffered DQMB Inputs   Not Supported
Registered DQMB Inputs   Not Supported
Differential Clock Input   Supported
Redundant Row Address   Not Supported
AND DIMM 3
( I realize there is a mismatch here but have had no dramas as yet because of it, will try re-installing the hardware wit h this module removed)
Field   Value
Memory Module Properties
Module Name   Nanya M2U51264DS8HC3G-5T
Serial Number   884B2815h
Manufacture Date   Week 48 / 2005
Module Size   512 MB (2 rows, 4 banks)
Module Type   Unbuffered
Memory Type   DDR SDRAM
Memory Speed   PC3200 (200 MHz)
Module Width   64 bit
Module Voltage   SSTL 2.5
Error Detection Method   None
Refresh Rate   Reduced (7.8 us), Self-Refresh
Memory Timings
@ 200 MHz   3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz   2.5-3-3-7 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge   Not Supported
Auto-Precharge   Not Supported
Precharge All   Not Supported
Write1/Read Burst   Not Supported
Buffered Address/Control Inputs   Not Supported
Registered Address/Control Inputs   Not Supported
On-Card PLL (Clock)   Not Supported
Buffered DQMB Inputs   Not Supported
Registered DQMB Inputs   Not Supported
Differential Clock Input   Supported
Redundant Row Address   Not Supported
Memory Module Manufacturer
Company Name   Nanya Technology Corp.
Product Information   http://www.nanya.com/e-htm/abc/abc-03.htm
Thankyou for your help with this folks, really appreciate it and am having some fun learning.

HP Experts - dm3 Switchable graphics and a lack of bios functionality

I currently own a dm3-1155ea with a switchable integrated 3200 and discrete 4330. I chose to put fedora 14 on my laptop which, when using proprietary graphics drivers (which are pretty much required for anything resembling battery life) only allow you to use the integrated graphics. Wishing to use the 4330, I ventured into the bios only to find a distinct lack of... Well, anything useful.
I've talked to customer support and they've confirmed that the functionality to turn off the integrated graphics exists, but has been deliberately disabled... Why? I understand hiding voltages and stuff or perhaps implementing a hidden yet accessible advanced bios for more advanced users, but doesn't it seem a little excessive completely blocking access to useful features? Features that are presumably there to solve little problems like mine...
So yeah, my question is really why so stingy with the bios features? Also, if you have any alternative suggestions about the switchable graphics in linux issue, I'd welcome them
Thanks
This thread covers a similar topic and contains additional details - http://h30434.www3.hp.com/t5/Notebook-Hardware/HP-I-need-you-to-support-your-Hardware/td-p/369867

I also have a laptop with switchable graphics but Intel integrated and ATI 3400 discrete. I run Kubuntu Linux 10.10 and cannot get the ATI proprietary drivers to work properly. My laptop is a Lenovo and it gives BIOS support to set the graphics all integrated, all dedicated or switchable and you can also turn off OS support for switchable. The only way Linux works right for me is to turn off OS support for switchable. Then I can set it to either all integrated or all dedicated. Windows 7 64 bit can run either graphics system, but Linux only sees and works off the integrated graphics, even if the BIOS is set to dedicated! I have no complaint as I still have OpenGL support at least at a minimal level (can run tuxracer). But if I try to install the add-on proprietary ATI driver I get the Linux equivalent of a blue screen....garbled pixellated log-in screen.

GX660 - how to restore BIOS?

Hello everyone,
a few days go I've tried to disable HPET in the advanced BIOS mode in a "unlocked BIOS" (i needed an unlocked BIOS for use SSD in AHCI mode); after saving BIOS settings and after reboot, I've only a blank screen.
Always seems to be power on but nothing happen...only blank screen.
I've tried to release AC, battery and CMOS battery but nothing change.
There's a way to restore BIOS(usb, cd, other)?
I've read CTRL+Home (where is "Home" button?....I've to use Fn button or 7 on Numeric Pad?) or CTRL+Start(Windows flag) on pressing power button but nothing happen.
Can you help me?
Thank you very much in advance
P.S. sorry for my bad english

MSI has answered me:
"There is no recovery BIOS procedure" then I've to send my notebook to MSI assistence.
Now, I'm trying to program a new BIOS EPROM...

Eclipse Plus- BIOS/ Overclocking

Although i am not having problems with my mobo as it runs stable and all, i cant run permanently at my overclock speed of 3900mhz. The system de-clocks which saves power, etc but i want to run at full speed all the time. With the BIOS revisions is there options to "fix" this and if so where can i get these bios's as the only one on MSI is version 1. See here all talking of v 1.3 and 1.4 but o cant to download them

The current BIOS for the Eclipse plus is version 1.0
With your system you should see 4300 Mhz easy seeing that it is watercooled.
In the BIOS do the following:
Advance BIOS Feature - CPU Feature - disable all except Hyper threading
- Chipset Feature - HPET Disabled
- Trusted Computing - No
Green Power - Disable all except Motherboard Led Control - Auto
Cell Menu - try the following settings
EIST - Disable
C-State - Disable
Base clock - 205
CPU Ratio - 20 = 4100 Mhz
OC Dial - Disable
QPI set to Full Speed and 4800 Gts
Mem Ratio - 3
Uncore Ratio - 6
CPU Voltage - +0.15
QPI Voltage - 1.30
DRam Voltage - 1.63
Spread Spectrum - Disable
These setting should give you a stable clock, if not then drop your CPU Ratio to 19 and increase clock to 215

Advance bios?

Similar Messages

Maybe you are looking for