Advance material planning for projects

Dear All,
We have a scenario for fabrication industry. Where client want to plan material procurement in advance for manufacture FG. But BOM of FG will come in later stage when design phase get finished in phases. Initial for cost planning and material procurement planning, they are finding out requirement of material quantities and costing happened on it. This material is planned for procurement, while the BOM will prepared in later design stage. FG are assigned to project activities, and project MRP will give planned orders. these material bom will rolled cost to activities, cost will get doubled and material too. How to handle this scenario, Any standard solution.

Hi Shrikant,
The advance procurement material list should be prepared and then it should be attached in initial stage to project.
Header(X)
Line item 1
Line item 2
This advance procurement BOM should be attached such that
the header(X) will become text item after attachment and
for the line items the Preq will be generated.
For this line item should be make to stock procurement type
and this should behave as dependent and independent requirement
and there will be no duplicacy of the requirements.
You need to dicuss this with PP consultant.

Similar Messages

  • Error running Execution plan for 'Project Analytics in PeopleSoft 9.0 '

    Hi ,
    I am running execution plan for Projects Peoplesoft 9.0 (BI Apps version 7.9.6)
    The issue is the file type data source went thru the database (data warehouse)
    the tasks that were completed SUCCESS were from the File source only from (SrcFiles).
    error as below.
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_PSFT_90_Adaptor:SDE_PSFT_ExchangeRateDimension_Full:(Source : FULL Target : FULL)
    MESSAGE:::
    Irrecoverable Error
    Error while contacting Informatica server for getting workflow status for SDE_PSFT_ExchangeRateDimension_Full
    Error Code = 36331:Unknown reason for error code 36331
    Pmcmd output :
    one more info,if this helps
    values defined in the Parameters of the execution plan.
    1     DATASOURCE     ,DBConnection_OLAP     is 'DataWarehouse'
    1 DATASOURCE     ,DBConnection_OLTP     is 'PSFT_9_0_FINSCM'
    1     DATASOURCE     ,FlatFileConnection     is 'PSFT_9_0_FlatFile'
    The 'Relational Connection' In Informatica Repository Manager is currently pointing to only 'PSFT_9_0_FINSCM'
    & 'DataWarehouse'
    Please let me know what is wrong?
    Regards,
    JK

    Hi ,
    I created the PSFT connection in 'Applicaiton connection' of Repository manager.
    Also the Informatica server's tnsnames.ora should have entry for the source( PSFT database) and that of the datawarehouse.
    thanks,
    JK

  • Material Master For Project

    Dear All,
    How we configure material master for Project stock
    Pl Help Step By Step
    or any document
    Regards
    Ranu

    Hi,
    While creating material master for project, you can select views as per relevance. While creating PO you should be clear whether you want to inventroze the stock or not. You can use account assignment as Q for matrial with Inventory.
    regards,
    Vinay

  • Moving avergae price updation in material master for project stock

    Dear All,
    My query is pertaining to updation of MAP( moving average price) for project specific procurement ( as project stock) for valuated project stock.
    As  definelty the cost of procurement gets consumed by project .but i want to know does the project stock procurement still updates the moving avergae price or not.
    Ex:-Suppose MAP in material master is 10 USD ( with qty 1)and i procure the same material ( qty 1)for project with account assignment Q for 9 USD . now will the MAP in material master becomes 9.5 USD or it remains 10 usd.?
    Please reply urgently
    Regards
    Amit

    Hi Amit,
    If your Project Stock is valuated, then, the valuation data for it is stored in a different table: QBEW.
    The normal, anonymus warehouse stock (the unrestricted use stock which is not assigned to any project or to any sales order) has its valuation data stored in MBEW.
    The "Accounting 1" view in the Material Master MM03 ONLY displays the data of MBEW.
    In the material master you will never see the valuation data of the valuated project stock (table QBEW) or the valuated sales order stock (valuation indicator "M" - table EBEW).
    The valuation data for the tables QBEW and EBEW can be seen in SE16 or in the transaction MBBS.
    Also note that these valuated special stocks are managed independently of the normal stock. If, for example, you change the Moving Average Price of your normal stock in MBEW, this will not have any influence on your project stock, as the data is under a totally diferent table QBEW.
    I hope this helps you,
    Esther.

  • Settings in Material Management for Project

    >Hi Experts
    >At the client end we are using Materials Management with Project System module.
    >While making the Purchase Order we are putting the Accounts Assignment Category as "P".
    >and entering a WBS element for utilization of budget in the Purchase order.
    >The following is the detail of the client requirement.
    >The equipment are to be delivered by the vendor over three financial year 2008-2009, 2009-2010, 2010-2011. Accordingly the budget for the equipment has been split for the wbs element across the financial years 2009, 2010, 2011.
    >Hence the equipment has been entered in three lines with delivery date as 31.03.2009, 31.03.2010, 31.03.2011 respectively for assigning the budget of the respective financial years 2009, 2010, 2011.
    >The value to be delivered by the vendor is not fixed and may vary according to the requirement of the project. Hence we would be required to utlilize the line item for the year 2010, if the line item of the year 2009 get consumed for preparation of gr in fy 2008-2009. But when we are trying to prepare the goods receipt for the line item entered for financial year 2010, it does not allow to save the goods receipt and gives the error, budget exceeded.
    >The requirement is that he should be allowed to use the line item for year 2010 and the budget should automatically get transferred from fy 2010 to fy 2009.
    >Thanks in advance.
    >Ashutosh

    Hi Amit,
    If your Project Stock is valuated, then, the valuation data for it is stored in a different table: QBEW.
    The normal, anonymus warehouse stock (the unrestricted use stock which is not assigned to any project or to any sales order) has its valuation data stored in MBEW.
    The "Accounting 1" view in the Material Master MM03 ONLY displays the data of MBEW.
    In the material master you will never see the valuation data of the valuated project stock (table QBEW) or the valuated sales order stock (valuation indicator "M" - table EBEW).
    The valuation data for the tables QBEW and EBEW can be seen in SE16 or in the transaction MBBS.
    Also note that these valuated special stocks are managed independently of the normal stock. If, for example, you change the Moving Average Price of your normal stock in MBEW, this will not have any influence on your project stock, as the data is under a totally diferent table QBEW.
    I hope this helps you,
    Esther.

  • Material type for Project related

    Hi ,
    When creteing the material master we have which take  "Material Type"  if it related to project , i am perticular about construction and instaltion related business topic . Normally we take Raw material , semi finished material and finished material in case of manufactureing industry , in construction in

    Hi
    In projects also maximum Raw material is used. Usage of semifinished and finished material is minimum.
    i am particular about construction and instaltion related business topic .
    In construction industry raw material type is used.
    Ex:
    Cement, bricks etc...
    Cement and bricks is a finished product for production industry, but this as RAW material for construction industry.
    THanks
    S.murali

  • Raw material planning for process industry.

    I am going to implement SAP R/3 in process industry where i get raw material from farmers.I have to accept all raw material from surrounding villages because it's a government rule.So its necessary that all farmers should produce well quality yield. For that they must follow standard procedure to grow their crop.Is it possible to plan this using SAP PP?
    How to face this type of sceanrieo?

    Hi kiran Ghule,
    With the functions of the Quality Management (QM) module, you can implement it.
    The QM application component supports tasks associated with quality planning, quality inspection and quality control. In addition, it controls the creation of quality certificates you can do this
    Explore your self in this module if any problem then come back.
    Regards
    R.Brahmankar

  • Material requirment from Projects

    Hi,
    I have one scenario where the material requirments will come from projects as materials (BOM) are assigned to project builder. After MRP run if there is material components available in free stock, it is n't getting adjusted against material requirments, rather creating new PR for the items. Request you to suggest on this.
    Thanks & Regards,
    Ranjan

    Dear Biplap,
    Any material required for a project and is assigned to a project is generally a special stock, "Q' type.  Basically SAP handles material required for project seperately, Sale order separtely, consignment seperately, vendor seperatly etc. 
    So when u run MRP for the first time related to that project, generally no material will be avl <b>under that project segment</b> and create Planned order / PR as the case may be eventhough there is unrestricted normal stock for that material. SAP MRP will only consider the materials or docs for netting only if it is related to that particular project/sale order.
    If you want to consider the unrestricted stock also then possibly u will have to write a Z program which will convert the normal unrestricted stock into project stock and again rerun MRP on that material to cancell the requirement generated thro the initial MRP run.
    reg
    Kiki
    Award points if this helps

  • Forecast material plan & material reference in notification

    Hi Experts,
    How can I analyze the breakdown due to material shortage & how I plan these material in future so no such breakdown will b come in future.
    For that I create once object part in notification as material shortage & create breakdown order there I reserve material ,so I got all breakdown data from IW66 with reference to that object code but system cannot show for which that breakdown come.
      Again I created one notification type for material shortage there I take reference object Equipment number & material number but there also system cannot accept material no in notification. The warning msg come as material will b directly copy fr equipment no.,but mtr code not display in notification.
    How can I map these scenario.
    Thanks & Regards,
    AVI DDS.

    Dear
    You can Map this by Using User Status in Order , No Need to Use Notification ,
    Create 2 User Status ,
    first One As "Material Available" , Make this As initial Status.
    Second One as "Material Shortage" ,
    Assign this to ur Order type , whenever you Create Order , Order will be having this "Material Available" as initial User Status , if you find Material is Shortage , Manually Set second user status "Material Shortage".
    Whenever needed Run IW38 , In Variant Selection select   "User Status " , filter it to display Order with user Status "Material Shortage " , you will get Orders with shortage .
    Using this Order Number , In IW13 get all the Shortage Material & Plan for Next year
    You Can Use User Status in Notification Also
    Regards,
    Edited by: Srinivas Narayana Gowda on Jun 12, 2009 1:15 PM

  • Procurement for Projects

    Dear all
    Could explain how the material procurement for projects happen? What's the difference between this and normal procurement?

    HI
    Its the same Only u wil have to use the Item category' P' for projects.which impies that the procurement is done against the said Projects.
    Also this can be mapped with PS module where a central Project will be created. The project will be broken down in to no of Work break dowmn structures which will be assigned a cost element.
    The total expenditure on each WBS will be determined using the WBS element.
    The Item category of P as Account assignment category of P have to be used for the PO's. The corresponding WBS element and the G/L account has also to be entered at the item level.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful

  • Please help to understand the Service parts planning,we r tring to do poc for project

    Hi
    Please help to understand the Service parts planning,we r tring to do poc for project
    1)How the sales history flow from cube to Interactive forecasting screen(like dp in apo there is no Planning area to store data and no load planning area from cube,so please let me know how it will load data?)
    2)How the Final demand will flow to DRP for further planning?
    3)What is the exact purpose of BOD?
    4)What is the leading indicator forecasting and the purpose?
    5)Where data will store in SPP (forecasting and other data like liveache in dp)?
    6)Product interchangeability and use?
    6)Can you please forward the process document to understand the flow as i am not able understand the help document
    Thanks for advance help
    Regards
    kkk

    Hi,
    Please check Service Part Supply Plan - Enterprise Services in SAP Advanced Planning and Optimization - SAP Library
    BR

  • User Exit for Material Plan Costs

    I have an escenario where the client needs another option to calculate the material plan costs, but need to identify the correct user exit.
    In transaction OKYF exist the option "U Valuation Price with User Exit" but need the user exit to use.
    Hope to receive information soon...
    Best Regards...

    Hi
    you can use unit costing for material option for this...
    Automatic netowrk costing for material component
    you need to maintain proper costing variant for material component in config.
    in projects assign material then select material -edit - cost - unit costing.
    which will get reflected in network cost in CJ40.
    Venkatesh

  • Project plan for EP

    Dear All,
      I am very new to EP, we are planning to implement EP. Would anybody give a rough project plan for EP, Atleast any links. this is for 700 users.
    Thanks in advance
    chandrasekhar
    Message was edited by: chandrasekhar yadlapalli

    Chandra,
    Post your email and I can send you a project plan template. Additionally, you can get these templates and others from the EP ASAP links;
    https://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_EP/Enterprise%20Portal/index.htm
    To download EP ASAP;
    https://service.sap.com/~sapidb/011000358700005875762004E
    The inner tab called 'Accelerators' are where the templates can be found.
    Regards,
    James

  • Project Plan for ChaRM implementation help

    Hi everybody,
    I am creating a Project Plan to implement ChaRM in a new project.
    This is the first time i am doing that task and i must deliver that plan to a team soon.
    So i would like to ask you about comments, idea, missing items on my current plan please
    (I voluntarily did not mention Estimated Duration, team to perform, requestor, etc..)
    Pre-Check :
    - Validate System Component and SP Level
    - Request Ids & roles on satellite systems / Build USER IDs & roles created on all satellite
    - Verify TMS settings for ChaRm
    - RFC Connection creation / RFC TEST
    - Activation of cross system Object Locking - CSOL
    Project :
    - Determin type of project for ChaRm (implementation / Maintenance)
    - Create project
    - Activate project for ChaRm
    - Activate project for task lists
    - Id's created in SolMan & satellite
    - Establish Business Partners
    - Approvals (Change Control process)
    - Test creation of Change Request
    - Test :Import transports between dev - QA  / QA to prod
    Thank you in advance
    and thx for all the things i understood with all the topics of this forum.

    Hi,
    Follow RUN SAP Roadmap for Implementing your solutions. Go through [this link.|https://websmp109.sap-ag.de/runsap] This explains Run SAP and how you can plan to implement your SAP solutions (including ChaRM).
    Run SAP has 5 phases.
    Assessment and Scoping
    Define Operations
    Setup Operations
    Handover into Production
    Operations and Optimization
    Hope this solves your problem.
    Feel free to revert back.
    -=-Ragu

  • In case of Non Stock Material - Different GL for projects from WRX

    Hi Gurus,
    While doing MIGO for non stock material in case of projects, system is crediting account from WRX in OBYC with blank valuation class. but how can we give different GL for projects in this case.
    Please revert asap.
    Thank you

    >
    sapmm99 wrote:
    > For non valuated material, material  master is required or?
    >
    > As per my knowledge material master is mandatory only for stock materials. not for not valuated and non stock materials usually we never maintain master data for non stock and non valuated materials
    >
    > if i am wrong please advise me
    Its upto you if you want maintain material master record or not for non valuated material. With material master you have a material code to input in the field of PO, without material master you put in short text.

Maybe you are looking for