Advance Payment to Venders
Hi Experts
I want to ask that what is the procedure of Advance Payment Flow system in SAP Business One. Means I have a vender who deals in advance payment so can i do it in SAP Business One, Please reply
Regards
Ashar Anwer
Hi Ashar............
In SAP B1 AP Down Payment Invoice you can use as Advance payment to the vendors. The Steps are like if you are giving advance payment as per invoice to invoice the you have to punch the PO first on the basis of which you should raise AP Down payment invoice. After that you have give payment to vendor against AP Downpayment Invoice through Outgoing Pyament and when you create the AP Invoice you should choose the same AP down payment invoice reference in AP Invoice so that it will deduct the advance payment amount from gross total as you already paid the advance to vendor. Then later it will ask you to pay only remain amount less advance payment amount.
Hope it will help you
Regards,
Rahul
Similar Messages
-
Hello All,
I want to confirm that my client has made the down paymewnt with respect to Asset PO at the time of down payment whether the payment amount will be loaded to asset or not.
As i know the payment amount should got to venders spl. gl a/c and it should not be load to asset .
This has happened here and because of it the system has calculated the depreciation twice one at the time of adv payment and other at the time of vender invoice.
please tell me what could be the reason behind that.
suggestHi
As per my understanding about your issue.
While posting advance payment with asset system will post to asset also with reference PO. Because of you may mention PO as well as Asset number. So that's system will post the entry to respective items and also you may select Transaction type 180 at asset line level. You can also check in the T.code AW01N asset balance as well as PO level.
And also please check advance payment date as well as depreciation run date.Because of you run Depreciation first after that you may post advance payment with the same date and with same periods after run the depreciation.
So that's why system will shows two time in the asset history.
I hope it will helps you.
Thanks and Regards
vamsi -
Advance payment report required
Dear guru
generally in our plant for advance payment we have to intimate the account department for release the payment against advance or PI or any other terms.
i want the report which can show me that which supplier payment is pending (for advance only)
at present i m using FBL1N. i didnt get the required report from this
Regards
DeveshHi Devesh,
There is no standard report to address just your specific requirement. However as others suggested you need to rely on the line item reports with specific selection criteria which you might already be doing.
Else develop custom report to suit your specific requirements.
Thanks & Regards
Subhasish -
Report for advance payment relevant purchase order
Dear Sapgurus,
Logistics people raise one purchase order and release procedure also from logistic teqm onlly after we need approval from finance head we had created one more release finance procedure how they will identify these are purchase order i have to pay advance payment is their any report can u please tell me.
Regards
UmiAmit kulkarni,
For this requirement you have to do validation of the amount field for advance payment againest PO.
i thiought this is only way to get your requirement
May be this information is useful to you
Regards
Surya -
Purchase order advance payment
Hi Friends,
Below is five requirement from my client regarding down payment and down payment request.
A) While posting down payment or down payment request Purchase order should require entry.
B) System should allowed to put purchase order for the same vendor against we posting advance payment or raising payment request.
C) If 100% advance has already paid against any purchase order, system should not allow to post any further advance against that purchase order.
D) If the 100% GRN has been done against any purchase order system should not allow to post any further advance against that purchaser order.
E) While paying advance system should consider the GRN or advance payment done against the purchase order, and system should allow the pay advance or raise the advance request less the value of advance or GRN value already done.
Your valuable input is highly appreciated.
Regards,
AshuHi,
whatever Mr.Ajay has told correct 1 & 2
The 1 and 2 are possible using field status groups. You can make the PO mandatory
The rest are not possible in standard system.
but system will propose while posting down payment r down payment request amount more than PO value warning message has accrued but it will never stop for posting ok
one more solution is with the help of ABAPer we can able to stop - Use Substitution,
Mr. Ajay below mentioned Option for EHP4 is also available for in this ME2DP also never stop - more than PO value down payment r down payment request
Its a matter of discipline... however, explore the new feature of PO advance payment in EHP4, Tcode ME2DP. May be you get few answers there
Mahesh -
Deduction of TDS while clearing Advance payment through F-53
Hi Gurus,
I deducted TDS on Advance payment of 10000 and then deducted TDS on Invoice of 50000 with base amount as 40000.
Now, when i am clearing this invoice and advance payment through F-53 to pay the remaining balance, system is again deducting TDS on Advance payment.
Please tell me how can i solve this issue.
Thank Youhii
here the steps u need to follow is
1. while making the down payment TDS is deducted
u make down payment through f-48.
2. post invoice through FB60. here when u r going to the withholding tax tab u need to delete the payment tax codes. if u do not delete than the tax will be deducted during the payment..
3. now go to F-54 and transfer the advance payment to normal by clearing special G/L
here when u clear the down payment the TDS deducted at he time of down payment will also be reversed.
4. now finally go to F-53 and make the outstanding payment to your vendor ..
so in this steps there wont be duplication of TDS pain.. u will be paying only once that is at the time of invoice.
Hope u got ur answer
assign points..
sejal singh -
Purchase order and advance payment
i raise one po in me21n after that i post advance payment document through based on the purchase order number & in f-48 their is field purchase order number and item numer i had already given what i post the purchase order number and item number after that again i went to me22n display purchase order the advance amount is not updated field in status tab can u please provide the answer
hi,
There is no way in the system to restrict the payment amount to 50%once, it is mentioned in the payment terms as 50% advance. System does not have control tocheck and avoid the full payment
Rgards
Uma -
Hi, Sap experts
I make advance payment to vendor against purchase order through F-48 now i want to use the advance payment amount in a report , which table & fields use for advance payment
regards
gkHi,
addition to that it will be always with posting Key 29 once cleared against invocie it will move to BSAK table. any residual clearing will create another document 29 posting key(open advance) key in BSIK table and 39 posting key for the full amount of advance in BSAK.
Rgds
Murali -
Advance payment against Purchase order/Work Order: F-47
Hi SAP Gurus,
Our Client's requirement is as follows u2013
Advance payment against Purchase order/Work Order:
1. Advance should be PO/WO wise & not item wise.
2. Advance should not exceed total PO/WO value.
3. Advance against PO should include taxes & conditions maintained in PO/WO
When I put the purchase order number along with the item number, it is taking into account the basic price for that specific item. This amount is excluding Tax.
Actually the advance is given against the Purchase Order. So whether it is possible to
1. Remove the mandatory filed of Item number against the PO?
2. Whether the amount of the advance should be inclusive of the Tax?
Regards,
AmitAmit kulkarni,
For this requirement you have to do validation of the amount field for advance payment againest PO.
i thiought this is only way to get your requirement
May be this information is useful to you
Regards
Surya -
How to do advance payment against PO for this is there any T.code
Hello,
Lt's say for ex: Once Po is created how to pay the advance payment against PO to the vendor, for that is there any transaction code.
Once advance payment is made against PO, again system should not allow for ammendement
So like this to control the system what are the configuration settings need to be done please explain
Early action in this matter will be highly appreciated.Hi,
Apply the user exit : EXIT_SAPMM06E_016
Following Logic can be use:
1. Validate the company code (BUKRS ) & Purchasing document type (BSTYP = F) from EKKO table for the Purchase order number (EBELN).
2. Check the entries for the Purchase order and the item number in the Purchase order history table ( EKBE) and also Validate if there is any down payment document exists (VGABE = 4)
3. If we find down payment doc in EKBE table then display the warning or error message as POP - UP by using functional module POPUP_TO_CONFIRM.
Step 1: Validate Company code and Purchasing Document type from EKKO table
Step 2: Check the Purchasing document history from EKBE table
Step 3: Check whether any down payment exists.
Step 4: Display popup message to user:
Use the function module u201CPOPUP_TO_CONFIRMu201D to display the below message u201CPo cannot be changed, Down payment already exists for this PO item u201D.
Edited by: redriver on Nov 27, 2011 10:06 AM -
A/R Advanced Payment Steps Confirmation
I need some confirmation regarding advanced payments from customers. I have read in the forums that advanced payments can not be linked to a sales order and the suggestion was to use the remark field to make note of the payment. Using the remark field is not an option for me. So as I understand it the steps for processing an advanced payment from a customer would be as follows.
1. Create sales order for amount $1,000.
2. Create A/R Down Payment invoice for $1,000
3. Create incoming payment $1,000
4. Create delivery off the sales order
5. Create invoice with $0 balance due from the delivery
Correct?
It just seems steps 1-3 are a lot of work that could be avoided if SBO simply added a deposit field to the sales order window that posted the payment once the sales order was saved. Iu2019m not a programmer so I just have to work with what comes out of the box.I am having an issue applying a payment to the reserve invoice. Initially I posted my advanced payment steps as follows.
1. Create sales order for amount $1,000.
2. Create A/R Down Payment invoice for $1,000
3. Create incoming payment $1,000
4. Create delivery off the sales order
5. Create invoice with $0 balance due from the delivery
Based on Gordon's suggestion step 2 above would be an A/R Reserve Invoice. After doing so I moved on to step 3 and entered an incoming payment. I then selected the checkbox next to the A/R Reserve Invoice in the rows below in the "Incoming Payments" window. Lastly I click the "Add" button, but B1 throws up a message "...amount to be paid is not matched to existing transactions. Do you want to post this amount as a Payment on Account?"
I don't understand why I am getting this message. If the payment I've entered is matched to the reserve invoice what's wrong? Am I missing a step or do something out of sequence? I even created the delivery from the AR Reserve Invoice and still had the same problem applying the payment to the AR Reserve Invoice. -
Control against advance payment over delivery date
Dear Gurus,
here we made a PO and its delivery date has been completed.
Advance payment has been given to PO vendor.
here can we restrict based on delivery date,that after completion of delivery date the advance payment should not be posted
Regards,
Bhanu.
Edited by: Bhanu Y on Dec 21, 2011 4:08 PMAdvance payment cannot be restricted based on PO delivery date in standard SAP.
Advance payment will be made through request F-47 and payment made through F-48. F-48 refers the advance request and F-47 refers the PO document number and item. -
Creation of DPR for advance payment to be made to customer
Hi Experts
Can I create DPR for advance payment to be made to Customer (thru Customer Code) thru tocde F-37 or any other way ? I understand tcode f-37 is used for advance payment to be received / received from customer. Tried by changing config thru FBKP but it creates DPR for advance payment received only.
Whether this is possible ?
Regards
VimalI want to make Loan Payment / Shares Application Money Payment from Parent Company to Subsidiary Company. Treating subsidiary copmany as customer.
Actually want to know whether DPR for advance payment to customer is possible or not ?
Regards
Vimal -
Unwanted printing of advanced payment when printing a sales order or pick
It will be great to have an option of disabling the automatic printing of the advanced payment incoming payment when printing a sales order or invoice.
The option is currently not available on the document printing options.No print sequence for sales order is setup.
But even before on 2007 version, it was SAP default to print always the incoming payment of an advanced payment on every sales order or invoice. -
How to go for Advance Payments..Release Process
Hi SAP Experts,
How to go for Advance Payments..
Any Guidence will be appriciated with Points..
Thanks in Advance
Adarsh
Edited by: adarsh srivastava on Jan 25, 2008 7:57 AMHi Aadarsh,
Advance payments is nothing but Down payments. Here i am taking down payment to Vendor and later clearing against invoice.
PROCESSING DOWNPAYMENT MADE TO Vendor
ENTERING DOWNPAYMENT REQUEST:
Accounting > Financial Accounting > Accounts payable > Document Entry > Down payment > Request (or) F-47
Document date 24/07/2007 (current date) Posting date 24/07/2007 (current date)
Account ****** (LG)
Trg.sp.G/L Ind. A & press enter.
Amount 25000/- Business area 830B
Due on 27/07/2007 Text Down payment request & POST.
DISPLAY VENDOR A/C TO SEE NOTED ITEMS:
All requests are comes under NOTED ITEMS. To see this, select the T code FBL1N.
Vendor Account ****** (LG) Company code 8301
All Items
Noted items (deselect the rest of the all check boxes) & execute.
ENTERING DOWNPAYMENT MADE TO VENDOR:
Accounting > Financial Accounting > Accounts Payable > Document Entry > Down payment > Down payment (or) F-48
Document date 24/07/2007 Posting date 24/07/2007
Account ****** (LG) Special G/L ind A
Account 211002 Business area 830B
Amount 25000/-
Value date 24/07/2007 Text Down payment paid. (Dont press enter)
Select REQUEST button.
In the next screen select the check box & select CREATE DOWN PAYMENTS button and SAVE.
DISPLAY VENDOR A/C TO SEE DOWN PAYMENT MADE:
Select the T code FBL1N
Vendor Account ****** (LG)
Company code 8301
All Items
Special G/L transactions (deselect the rest of the all check boxes) & execute.
POST PURCHASE INVOICE AGAINST PAYMENT MADE:
Accounting > Financial Accounting > Accounts Payable > Document Entry > Invoice - general (or) F-43
Document Date *//*** Posting Date *//***
Company Code 8301 Currency INR
PstKy 31 Account ****** (LG) & press enter
Amount 50,000/- Business Area 830B Payt terms 830I
Text Goods purchased
PstKy 40 Account 401000 (Material Purchased) & press enter
Amount * Business Area 830B
Text + & press enter. Select menu item DOCUMENT > SIMULATE & POST.
CLEARING OF DOWNPAYMENT MADE AGAINST INVOICE:
Accounting > Financial Accounting > Accounts Payable > Document Entry > Down payment > Clearing (or) F-54
Document date 24/07/2007 Posting date 24/07/2007
Account ****** (LG)
Invoice ref. ****** (against which Vendor invoice you want to clear)
Text Clearing document
Select PROCESS DOWN PAYMENTS button. Double click in the TRASFER POSTING (or) specify the amount & SIMULATE & SAVE.
DISPLAY VENDOR A/C TO SEE OPEN ITEMS:
Select the T code FBL1N
Customer Account ****** (LG)
Company code 8301
Open items
Normal items (deselect the rest of the all check boxes) & execute.
CLEARING OPEN ITEMS MANUALLY:
Accounting > Financial Accounting > Accounts Payable > Account > Clear (or) F-44
Account ****** (LG)
Clearing date *//*** (Current Date)
Select PROCESS OPEN ITEM button. First deselect all items (by double clicking on the line items). Then double click on the first invoice line Item (Invoice 25,000) and double click on the payment (Document type KA) and SIMULATE and POST.
DISPLAY VENDOR A/C TO SEE ALL ITEMS:
Select the T code FBL1N
Customer Account ****** (LG)
Company code 8301
All items
Normal items (deselect the rest of the all check boxes) & execute.
If this is helpful. assign me points
Maybe you are looking for
-
Hi experts, I am updating a scheduling agreement using IDOC with basic type DELFOR02 and message type DELINS. After posting an IDOC, I get an error message of "No batch input data for screen SAPMSSY3 0121" or "No batch input data for screen SAPMSSY3
-
My music is completely messed up: many songs shortened to 3:01, many songs in different versions. Should I delete all and reimport all my purchases? Or is there a more elgant way of cleaning the media center?
-
I can go to contacts,edite scroll down to the bottom then hit delete but when I go back to my contacts it's still there can anyone help me with this
-
SOA Server on Linux never gets started.
Guys We are trying to install SOA Suite 11g Version 11.1.1.5 on Linux but it nevers gets started. A thread was posted earlier but didnt get help. Here is the earlier thread soa-infra goes down time everytime We tried each and every possible solution
-
I have been having serious problems with losing meetings which I entered into ical. When I go back to check they have vanished. It seems to be happening randomly. I use isync to sync my calender up to another computer and had it on auto sync. I thoug