Advanced Analysis BICS and BI Java

Hi experts , i have this Technical doubt:
Advanced Analysis for Office extract data for SAP BW by BICS ( BI Consumer Service). So, is necessary for use it the BI Java component installed on SAP BW?
Thanks a lot.
Regards.
A.

I don't think its required if you connect local through the SAP GUI back to BW. We have the BICS installed and that required us to move up to 7.02 on both our ABAP and Java(portal) stacks. If you are running XI 3.1 SP3 for BOE I sugguest you download the Analysis SP 1.0 SP08. If you have access to the software the install to a client is fast. Setting up the BICS is something you should do in time but takes an effort on both the ABAP and Java stack system. Sorry I do not have the answer you need. Just installed advanced anaylsis 1.0 SP 08.
When you install AA and try to connect to BW, if you get error it will point you to the log files. One problem I had was the antivirus software had to be turned off until we made adjustments. I hope this makes your work a little easier.
If you do not get a reply other than mine then turn in an OSS message on the SAP marketplace.

Similar Messages

SNC between SAP BO and SAP BW for MS Advanced Analysis

Hy experts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue:
when the user launch a Bex Query by MS Advanced Analysis, this error message occurs:
No applicable data found.
On the SAP BW system, on ST22 there is this runtime error:
CALL_FUNCTION_SEND_ERROR.
An error occurred when executing a Remote Function Call.
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
What happened?
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
An error occurred when executing a Remote Function Call.
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "SNC (Secure Network Communication)"
Place................ "CPIC (TCP/IP) on host ANDREA_13"
Version.............. 5
Error code........... "-12"
Error text........... "SNCERR_INVALID_FRAME#A received frame is
invalid/truncated or is no SNC-frame"
Description.......... "SncProcessInput"
System call.......... " "
Module............... "sncxx.c"
Line................. " "
The error reported by the operating system is:
Error number..... " "
Error text....... " "
User and Transaction
Client.............. 100
User................ 00000015
Language Key........ "E"
Transaction......... " "
Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
Program............. "SAPLRSBOLAP_BICS_PROVIDER"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."C:\Program Files\Microsoft Office\Office1"
Function Module..... "BICS_PROV_GET_INITIAL_STATE"
Call Destination.... "GBP_boe_Default"
Source Server....... "ANDREA_13"
Source IP Address... "10.101.3.80"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
"BICS_PROV_GET_INITIAL_STATE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1
of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
Could you help me?
Thank's a lot and best regards.
Andrea Maraviglia

Ciao Andrea,
just a couple of hints:
- Did you already tried to skip logon to BOE and instead directly select BW system? this should avoid to involve snc and then BEx query should be accessible. This would be a further confirmation that issue is the SNC, even if the log you posted is pretty clear about that.
- Do you have snc installed even in local PC running MS Advanced Analysis? I Think it is necessary for the described workflow (page 24 of Admin Guide):
"With SAP BusinessObjects Enterprise as the BI platform, single sign-on works if the following conditions
are true:
u2022 BusinessObjects Enterprise XI 3.1 is configured correctly for single sign-on. For more information,
see u201CConfiguring SAP authenticationu201D in the Integration for SAP Solutions Install and Admin Guide
at http://service.sap.com/bosap-instguides SAP BusinessObjects Business Intelligence (BI) >
Integration for SAP Solutions > XI 3.1.
u2022 Secure Network Communications (SNC) is installed on each client PC. For more information, see
SAP Help Portal at http://help.sap.com SAP NetWeaver > SAP NetWeaver Library > SAP
NetWeaver by Key Capability > Security > Network and Transport Layer Security > Secure
Network Communications.
u2022 Each end user has a user account in the connected BW system."
Furthermore, if I rember correctly, there could be restriction in license using SAP Cryptographic Library (client connection is not supported: SAP notes 597059 and 397195), so you should check your SNC software.
Hope it could hep.
Regards.
Roberto.

Advanced Analysis MS Office 1.3 ramp-up: when and what ?

Hello all,
Is there any news about Advanced Analysis MS Office 1.3 ramp-up:
when starting and what new functionality will be adding?

Dear Diego Ferrary
SBO Analysis 1.1/1.2 's Web service URL WSURL is not resolved, hence not able to login to the server.
The Error Log shows
General .NET Exception:
GetServerInfo exception (Error: WSE 99999)
   at BusinessObjects.DSWS.Session.Session.GetServerInfo()
   at com.sap.ip.bi.pioneer.core.boe.CrBoeInternalServiceBase.CheckBoeSystem(CoBoeSystemInfo iSystemInfo, ICrUrlValidatedResult& oUrlValidateResult, CrDSWSVersionEnum& oVersion, String& oErrorMessage)
     | 2012-02-29T18:08:42     |
But the same WSURL is working in Live Office Connection.
Am i missing something.
kind regards
Bala

Advanced Analysis MS Office 1.2 ramp-up: when and what ?

Hello all,
Is there any news about:
Advanced Analysis MS Office 1.2 ramp-up: when starting and what new functionality will be develop?

Hello Mikhail,
I heard at TechED Las Vegas this past week that 1.2 ramp-up will be starting later this year; the focus of this release we heard was going to be about Prompts.
I will go back to my notes and try to post a blog if I have enough information.
Also please note the name is BusinessObjects Analysis, MS Edition for Office (no longer Advanced Analysis)
Regards,
Tammy

Installing Advanced Analysis Vi's and Examples

When I try to open up some of the advanced mathematics vi's, labview can't find some of the subvi's. I'm assuming that I have to install these advanced analysis vi's because the program tells you that you have to before using the mathematics vi's. if anyone can tell me where I can install these from (do I need to download them from ni.com or what?) I'd really appreciate it!

It sounds like you might be having trouble because you do not have the Full Package of LabVIEW. The Full Package comes with several advanced analysis VI's that the base package does not include. This would explain why so many of the subVI's are missing. I'm afraid there is no place you can just download the VI's, you have to get the full package. If you are curious, you can look in the NI catalog on page 74 to see what things are not included with the Base package of LabVIEW. If you do have the Full package, you might want to be more specific about which VI's you are having trouble with.

BO 4.0 Advanced Analysis for OLAP - The MDAS service encountered an error.

Hi guru's,
We are running BO 4.0 SP02 Patch 11 with SAP BW 7 and experiencing the following error with Advanced Analysis for OLAP:
"Analysis edition for OLAP
The MDAS service encountered an error."
After you click show details:
"com.crystaldecisions.thirdparty.org.omg.CORBA.MARSHAL minor code: 0x0 completed: No"
I have researched into this and found forums such as:
http://forums.sdn.sap.com/thread.jspa?threadID=2053481
SAP KB 1560100 - BI4.0 Advanced Analysis Web problem: The MDAS Service encountered an error
SAP KB 1661163 - An error is generated when selecting a query or cube in Analysis for OLAP: Error 15
However, none of these have helped our situation too much.
We have rebuilt the windows server 2008 R2 recently, hence the process we followed was a fresh install of BO 4.0 SP02 platform & tools, and then patch 11 on top of these.
Crystal, WEBI's (using the same BICS connections as the AA's) and Dashboards are all working as per expected.
The errors are for every AA including ones with only 2 variable selections (light queries) to ones with many more. Hence it is platform wide for Advanced Analysis.
I have also tried creating new AA using existing BICS, new BICS existing AA, new BICS new AA all with no luck.
We have also created new Adaptive Processing Servers with only the MDAS as a common service, turned on tracing etc but nothing springs to us as to what is going wrong.
Any ideas would be greatly appreciated?
Thanks all,

Hi All,
After conversing with SAP support technicians we have found what is causing this issue.
On the windows servers we have the following installed locally:
- BO platform 4.0 SP02
- BO platform 4.0 SP02 patch 11
- BO client tools 4.0 SP02
- BO client tools 4.0 SP02 patch 11
- Crystal reports 2011 SP02
- Crystal reports 2011 SP02 patch 11
- Crystal reports for Ent SP02
- Crystal reports for Ent SP02 patch 11
It seems that the crystal reports 2011 or cr for Ent was causing an issue in the .WAR files that BOE uses to run Advanced Analysis for OLAP.
After uninstalling the two crystal products and removing any left over cr files in program files on the server, AA for OLAP works successfully in our environment.
The other point after this was i stopped the tomcat and SIA, i renamed the BOE folder under <install dir>\SAP BO4.0\Tomcat6\webapps and restarted the tomcat and then the SIA. In 4.0 when the tomcat is started again it will go and recreate the BOE folder from the BO directories effectively recreating the apps .WAR files under the webapps\BOE folder.
SAP will hopefully document this issue for other clients.
Cheers,

YTD calculation from BEx is not working in Advance Analysis for OLAP/OR Office

I have AA for OLAP based on BEx. There are YTD calculation in BEx Designer: User enters Period in variable, and in user exits, the Period Range is populated as "1 ~ UserEnteredValue" in second variable. In BEx, YTD is calculated based on the Restrictive KF for the period range, calculated in User Exit. This is working fine in BEx Analyzer, however in Advance Analysis (for OLAP OR in Ofice), the YTD value is not coming up they way it is in BEx Analyzer...
Anybody has any clue, why??
Thanking all of you in advance

Hello Sharma
If something is working for BEx Analyzer but not for Analysis OLAP or Analysis Office then this typically (but not always) indicates an issue with the BICS (BI Consumer Services) component.
I would suggest you contact support about this so the appropriate logs can be captured and the issue investigated by the BICS team.
Regards
Ian

Urgently! In Hyperion web analysis font and color can not be changed

In Hyperion web analysis, when I want to set or change font, a null dialogbox appear ; when I click and want to set or change color, nothing happen,even no dialogbox appears. Why?
My Oracle Hyperion Performance Management version is v11.1.1.2.
thanks advance!

Hello,
As far as I know from Metalink, there is a same problem with Japanese locale in WA. For cyrillic language, which I use, I've been advised by Oracle tech persons to set the same settings in all regionals (Standard and formats, location, and Advanced -> Non unicode) and IE language preference (or use English everywhere as temporary workaround), which worked for me. May be WA has some additional issues in Java color/font selection dialogs when using non-English locales.
If you have Metalink access, you can search for bug ID # 8538102, according to it, this problem will be fixed in 11.1.2 release of EPM.
Regards.

Advanced Analysis workbook does not open from infoview - only addin opens

I have saved an advanced analysis office workbook in bo enterprise and it is subsequently shown in a folder on infoview. But when I want to open the workbook from there excel opens with the aa addin opened but no workbook appears.
I have already set the LoadBehavior registry setting in the branch
HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\AddIns\SBOP.AdvancedAnalysis.Addin2003.1
to the value 3 for enabling (as described in the Ingo Hilgeforts book "Inside SAP BusinessObjects Advanced Analysis"). Somehow the workbook name does not get transferred to excel on opening.
Can anybody help?
Claudia

Open Central Administration
    Application Management
    Manage Web Applications
    Select the webapplication to change
    Click General Settings in the ribbon
    Scroll down to Browser File Handling and select Permissive
    Click on the OK button
If this helped you resolve your issue, please mark it Answered

BOBJ Advanced Analysis for Office patch SP10

I imported the analysis product into my existing SAP Installation Server. When I import patch 5 or patch 8, no problem. But when I import patch 10 and then check server, it says I'm missing 12 files. If I try to install to a workstation I see the same errors (11 files). If you just apply patch 10 directly to a workstation without using the installation server, it gives no errors. It seems that the install script for the server is just wrong. Some of the files it is looking for are actually missing. Others are there in the AAO folder, but they're not in the subfolders that it's looking in. Has anyone else seen this and is there a solution? Thanks.
It's not pretty, but here's a paste of the text from the sapsetuperrors xml file.
Action-Type State Error Source Destination Error-Code
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\pluginwrapper.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\pluginwrapper.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\DSWS_31\BusinessObjects.DSWS.BIPlatform.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\DSWS_31\BusinessObjects.DSWS.BIPlatform.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\DSWS_31\BusinessObjects.DSWS.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\DSWS_31\BusinessObjects.DSWS.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\DSWS_31\BusinessObjects.DSWS.Session.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\DSWS_31\BusinessObjects.DSWS.Session.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\DSWS_40\BusinessObjects.DSWS.BIPlatform.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\DSWS_40\BusinessObjects.DSWS.BIPlatform.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\DSWS_40\BusinessObjects.DSWS.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\DSWS_40\BusinessObjects.DSWS.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\DSWS_40\BusinessObjects.DSWS.Session.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\DSWS_40\BusinessObjects.DSWS.Session.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\DSWS_40\pluginwrapper.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\DSWS_40\pluginwrapper.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\BiDSWS_31.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\BiDSWS_31.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\BiDSWS_40.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\BiDSWS_40.dll -2147024894
File Install The system cannot find the file specified. SAP\AdmInstPt\AAO\Syncfusion.GridHelperClasses.Windows.dll C:\Program Files\SAP BusinessObjects\Advanced Analysis\Syncfusion.GridHelperClasses.Windows.dll -2147024894

Hello Jurg,
First, try to uninstall what you have and restart the workstation installed. Download the latest version of the Analysis Office, for the 1.0 is the SP12 and for the 1.1 is the SP4. After install it and check how it will work.
Pay attention if your are trying to install the 1.1. We have 2 files, the 32 and 64 bit.
Thanks
Diego Ferrary

How to Set up the variables and others to compile and Run Java Programs

Hello,
I have just downloaded the jdk1.6.0_07 and jre1.6.0_07 and installed it in C:\Program files\Java in my Windows XP ,So please tell me how to sett up the enviroment variables etc to compile and run Java Programs from Command Prompt.
thanks

To set the PATH permanently, add the full path of the jdk1.6.0_<version>\bin directory to the PATH variable. Typically this full path looks something like C:\Program Files\Java\jdk1.6.0_<version>\bin. Set the PATH as follows on Microsoft Windows:
1. Click Start > Control Panel > System on Windows XP or Start > Settings > Control Panel > System on Windows 2000.
2. Click Advanced > Environment Variables.
3. Add the location of bin folder of JDK installation for PATH in User Variables and System Variables. A typical value for PATH is:
C:\Program Files\Java\jdk1.6.0_<version>\bin

Building and Deploying Java applications in different platform (OS)

Hi all,
We currently have a J2EE based web services application that is built (compiled) and deployed on Windows 2000 Advanced server. But in future, we will be using WIndows 2000 server for development only and HP-UX for production.
So, we are planning on executing the build (compilation) of our application on Windows 2000 server and deploy the same binaries (WAR) on HP-UX also. So, I wanted to know anyone has faced issues in the past by deploying an application on a different platform than the one on which it was compiled. Is it recommended by SUN to compile and build Java applications on the same platform on which the application is deployed.
Note that in my case, the JVM versions between Windows server and HP-UX would be the same. But the JVM for Windows server has been provided by Sun and the JVM for HP-UX has been provided by HP-UX.
Your inputs are greatly appreciated.

Well, it's all Java, right? So what's the problem? Since the JVM for HP-UX isn't made by Sun, so there could be compatibility problems, but I would expect that would be minimal if a problem at all. But you can't know unless you run it.
I don't know about building on the different systems. Java's supposed to be write once, run anywhere.... The byte code should be compatible no matter what. I've never heard of Sun saying "compile it on each platform". If the HP JVM isn't going to like bytecode compiled on Windows or another OS, then something isn't kosher with someone's JVM or compiler.

Drag and Drop - Java -- other application

Hi,
I'm writing an application, which requires to transfer the content of textfields through Drag and Drop to any other application.
Basically this works, but in combination with some applications, e.g. Mozilla, it happens, that the DragSourceListener doesn't recognize, that the Drag and Drop - operation is finished.
Because of this I get an InvalidDnDOperationException, when I try to start a new Drag and Drop - operation.
Can anyone tell me, how to solve the problem?
thanks in advance
Christoph

And I get the:
java.lang.NullPointerException
     at oracle.jbo.uicli.jui.JUPanelBinding.bindUIControl(JUPanelBinding.java:808)
     at empapppack.empframe.jbInit(empframe.java:116)
     at empapppack.empframe.<init>(empframe.java:51)
     at emppapppack.Application1.<init>(Application1.java:13)
     at empapppack.Application1.main(Application1.java:50)

Disabling buttons in Excel Advanced Analysis

Hi!
This is my first post...I am excited to be a part of this forum! I am currently a new intern at Proctor & Gamble and have a general question.
For some users of Advanced Analysis, I would like the display button (in the design panel under the Advanced Analysis tab) to be either invisible, or non-functional. Is there a way to do this (macros? or under admin control, adjusting the user account settings?)
Thanks so much for your help and time!
Jordan

Hi Tammy.
Unfortunately, only end users know, which characteristic and values they want to exclude.
If i exclude in Bex-Query, it will limit end users.
I opened a topic on ideas, please vote up if you agree.
[https://cw.sdn.sap.com/cw/ideas/6769|https://cw.sdn.sap.com/cw/ideas/6769]

Advance Analysis Workbook Error ID-111006 on Refresh

We're currently on version 1.4.4.2737. I've created the advanced analysis office workbook using BOBJ connection and stored it on my PC. Next time when I open the workbook from PC and try to refresh it, it asks for BOBJ credential and then executes and I get attached message. No dump found in SAP BI (ST22).
If I create the workbook using SAP BI (Enter Skip on BOBJ credential popup) and then tried to reopen it, Refresh works perfectly fine.
Any idea why it gives error while refreshing the workbook on PC created using BOBJ connection?
Thanks,
Milind

Hi Tammy ,
We are presently using 1.4.9.3240 .I have an issue when I try to pull seven mesures which are tenure feilds in my scenario and which have maximum of 8 decimals ie (10892443.484) and have filtered with backgroud filters which are restricted data which should bring a result of 450 records approximately. But, analysis Throws an error with this samll data .
The Error Log for this is as below
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Worksheets()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Worksheets>b__4()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:22 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Error: Application Exception (ID 103042)
Nested Exception. See inner exception for details below.
   at com.sap.ip.bi.pioneer.core.main.CrSession.CallbackStart()
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStart()
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackStart(CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStartAmodal(CoCultureSwitchPack iPack, CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackWrapForOfficeEvents(CallbackWrapDelegate iDelegate, CnCallbackErrorSeverity iSeverity, CoUseWaitCursorEnum iWaitCursor)
>> General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.set_Saved(Boolean RHS)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<>c__DisplayClass15.<set_Saved>b__14()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlVoid(CrOfficeAccessorDelegate opCallback)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.set_Saved(Boolean value)
   at com.sap.ip.bi.pioneer.excel.views.EaViewManagerSession.OnProcessingFinished(Object iSender, CoProcessingFinishedEventArgs iEventArgs)
| 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.excel.main.EaSession.ProcessUnhandledException() ()
- Critical: Application Exception (ID 103042)
Nested Exception. See inner exception for details below.
   at com.sap.ip.bi.pioneer.core.main.CrSession.CallbackStart()
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStart()
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackStart(CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStartAmodal(CoCultureSwitchPack iPack, CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackWrapForOfficeEvents(CallbackWrapDelegate iDelegate, CnCallbackErrorSeverity iSeverity, CoUseWaitCursorEnum iWaitCursor)
>> General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.set_Saved(Boolean RHS)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<>c__DisplayClass15.<set_Saved>b__14()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlVoid(CrOfficeAccessorDelegate opCallback)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.set_Saved(Boolean value)
   at com.sap.ip.bi.pioneer.excel.views.EaViewManagerSession.OnProcessingFinished(Object iSender, CoProcessingFinishedEventArgs iEventArgs)
| 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.common.messagehandling.CoMessenger.WriteToLog() ()
- Critical: 111007 #msl.excp.norestart | 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.common.messagehandling.CoMessenger.WriteToLog() ()
- Verbose: Set DoNotUpdateSsoTickets to true for workbook | 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.excel.main.EaSession.RemoveWorkbook() ()
- Verbose: Set DoNotUpdateSsoTickets to false for workbook | 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.excel.main.EaSession.RemoveWorkbook() ()
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Name()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Name>b__f()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Worksheets()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Worksheets>b__4()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Error: Application Exception (ID 103042)
Nested Exception. See inner exception for details below.
   at com.sap.ip.bi.pioneer.core.main.CrSession.CallbackStart()
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStart()
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackStart(CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStartAmodal(CoCultureSwitchPack iPack, CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackWrapForOfficeEvents(CallbackWrapDelegate iDelegate, CnCallbackErrorSeverity iSeverity, CoUseWaitCursorEnum iWaitCursor)
>> General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.set_Saved(Boolean RHS)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<>c__DisplayClass15.<set_Saved>b__14()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlVoid(CrOfficeAccessorDelegate opCallback)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.set_Saved(Boolean value)
   at com.sap.ip.bi.pioneer.excel.views.EaViewManagerSession.OnProcessingFinished(Object iSender, CoProcessingFinishedEventArgs iEventArgs)
| 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.excel.main.EaSession.ProcessUnhandledException() ()
- Critical: Application Exception (ID 103042)
Nested Exception. See inner exception for details below.
   at com.sap.ip.bi.pioneer.core.main.CrSession.CallbackStart()
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStart()
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackStart(CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStartAmodal(CoCultureSwitchPack iPack, CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackWrapForOfficeEvents(CallbackWrapDelegate iDelegate, CnCallbackErrorSeverity iSeverity, CoUseWaitCursorEnum iWaitCursor)
>> General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.set_Saved(Boolean RHS)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<>c__DisplayClass15.<set_Saved>b__14()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlVoid(CrOfficeAccessorDelegate opCallback)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.set_Saved(Boolean value)
   at com.sap.ip.bi.pioneer.excel.views.EaViewManagerSession.OnProcessingFinished(Object iSender, CoProcessingFinishedEventArgs iEventArgs)
| 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.common.messagehandling.CoMessenger.WriteToLog() ()
- Critical: 111007 #msl.excp.norestart | 2015-02-16T19:28:23 | com.sap.ip.bi.pioneer.common.messagehandling.CoMessenger.WriteToLog() ()
- Verbose: Set DoNotUpdateSsoTickets to true for workbook | 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.main.EaSession.RemoveWorkbook() ()
- Verbose: Set DoNotUpdateSsoTickets to false for workbook | 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.main.EaSession.RemoveWorkbook() ()
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Name()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Name>b__f()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Worksheets()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Worksheets>b__4()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Error: Application Exception (ID 103042)
Nested Exception. See inner exception for details below.
   at com.sap.ip.bi.pioneer.core.main.CrSession.CallbackStart()
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStart()
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackStart(CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStartAmodal(CoCultureSwitchPack iPack, CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackWrapForOfficeEvents(CallbackWrapDelegate iDelegate, CnCallbackErrorSeverity iSeverity, CoUseWaitCursorEnum iWaitCursor)
>> General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.set_Saved(Boolean RHS)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<>c__DisplayClass15.<set_Saved>b__14()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlVoid(CrOfficeAccessorDelegate opCallback)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.set_Saved(Boolean value)
   at com.sap.ip.bi.pioneer.excel.views.EaViewManagerSession.OnProcessingFinished(Object iSender, CoProcessingFinishedEventArgs iEventArgs)
| 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.main.EaSession.ProcessUnhandledException() ()
- Critical: Application Exception (ID 103042)
Nested Exception. See inner exception for details below.
   at com.sap.ip.bi.pioneer.core.main.CrSession.CallbackStart()
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStart()
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackStart(CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStartAmodal(CoCultureSwitchPack iPack, CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackWrapForOfficeEvents(CallbackWrapDelegate iDelegate, CnCallbackErrorSeverity iSeverity, CoUseWaitCursorEnum iWaitCursor)
>> General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.set_Saved(Boolean RHS)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<>c__DisplayClass15.<set_Saved>b__14()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlVoid(CrOfficeAccessorDelegate opCallback)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.set_Saved(Boolean value)
   at com.sap.ip.bi.pioneer.excel.views.EaViewManagerSession.OnProcessingFinished(Object iSender, CoProcessingFinishedEventArgs iEventArgs)
| 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.common.messagehandling.CoMessenger.WriteToLog() ()
- Critical: 111007 #msl.excp.norestart | 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.common.messagehandling.CoMessenger.WriteToLog() ()
- Verbose: Set DoNotUpdateSsoTickets to true for workbook | 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.main.EaSession.RemoveWorkbook() ()
- Verbose: Set DoNotUpdateSsoTickets to false for workbook | 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.main.EaSession.RemoveWorkbook() ()
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Name()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Name>b__f()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Worksheets()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Worksheets>b__4()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:24 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Error: Application Exception (ID 103042)
Nested Exception. See inner exception for details below.
   at com.sap.ip.bi.pioneer.core.main.CrSession.CallbackStart()
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStart()
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackStart(CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStartAmodal(CoCultureSwitchPack iPack, CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackWrapForOfficeEvents(CallbackWrapDelegate iDelegate, CnCallbackErrorSeverity iSeverity, CoUseWaitCursorEnum iWaitCursor)
>> General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.set_Saved(Boolean RHS)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<>c__DisplayClass15.<set_Saved>b__14()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlVoid(CrOfficeAccessorDelegate opCallback)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.set_Saved(Boolean value)
   at com.sap.ip.bi.pioneer.excel.views.EaViewManagerSession.OnProcessingFinished(Object iSender, CoProcessingFinishedEventArgs iEventArgs)
| 2015-02-16T19:28:25 | com.sap.ip.bi.pioneer.excel.main.EaSession.ProcessUnhandledException() ()
- Critical: Application Exception (ID 103042)
Nested Exception. See inner exception for details below.
   at com.sap.ip.bi.pioneer.core.main.CrSession.CallbackStart()
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStart()
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackStart(CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.excel.main.EaSession.CallbackStartAmodal(CoCultureSwitchPack iPack, CoUseWaitCursorEnum iWaitCursor)
   at com.sap.ip.bi.pioneer.controls.main.CnSession.CallbackWrapForOfficeEvents(CallbackWrapDelegate iDelegate, CnCallbackErrorSeverity iSeverity, CoUseWaitCursorEnum iWaitCursor)
>> General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.set_Saved(Boolean RHS)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<>c__DisplayClass15.<set_Saved>b__14()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlVoid(CrOfficeAccessorDelegate opCallback)
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.set_Saved(Boolean value)
   at com.sap.ip.bi.pioneer.excel.views.EaViewManagerSession.OnProcessingFinished(Object iSender, CoProcessingFinishedEventArgs iEventArgs)
| 2015-02-16T19:28:25 | com.sap.ip.bi.pioneer.common.messagehandling.CoMessenger.WriteToLog() ()
- Critical: 111007 #msl.excp.norestart | 2015-02-16T19:28:25 | com.sap.ip.bi.pioneer.common.messagehandling.CoMessenger.WriteToLog() ()
- Verbose: Set DoNotUpdateSsoTickets to true for workbook | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.excel.main.EaSession.RemoveWorkbook() ()
- Verbose: Set DoNotUpdateSsoTickets to false for workbook | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.excel.main.EaSession.RemoveWorkbook() ()
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Name()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Name>b__f()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Error: General .NET Exception:
Exception from HRESULT: 0x800401A8
   at Microsoft.Office.Interop.Excel.WorkbookClass.get_Worksheets()
   at com.sap.ip.bi.pioneer.addins.xlwrap.WorkbookWrapBase.<get_Worksheets>b__4()
   at com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn[TResult](CrOfficeAccessorDelegate`1 opCallback)
| 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.excel.utils.EaExcelAccessor.AccessXlReturn() ()
- Verbose: Enter Cleanup | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.common.Help.CoHelp.StopF1HookIntern() ()
- Verbose: Leave Cleanup | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.common.Help.CoHelp.StopF1HookIntern() ()
- Verbose: EaTaskpane.setVisible: 0 | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.addins.xl.EaTaskpane.set_Visible() ()
- Verbose: Found context menu for Normal mode at index 28 | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.controls.cbar.EaExcelContextMenu.GetExcelNormalContextMenu() ()
- Verbose: Found context menu for Normal mode at index 28 | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.controls.cbar.EaExcelContextMenu.GetExcelNormalContextMenu() ()
- Verbose: Found context menu for Page Break Preview mode at index 31 | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.controls.cbar.EaExcelContextMenu.GetExcelPageBreakContextMenu() ()
- Verbose: Set DoNotUpdateSsoTickets to true for workbook | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.excel.main.EaSession.ShutDown() ()
- Verbose: Windows temporary directory C:\Users\hrangarajan\AppData\Local\Temp is writeable | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.controls.opendialogs.command.CnOpenSaveCommandsHelper.TryCleanupCache() ()
- Verbose: Destroying Application with ID defaultsessionanchor | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.core.logging.CrBicsLoggingLocation.log() ()
- Warning: Event was started, but not completed\: 255486 ms: Get provider result set (13040) | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.core.logging.CrBicsLoggingLocation.log() ()
- Information: [0] Try to find a service implementation for type SERVER_STATISTIC | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.core.logging.CrBicsLoggingLocation.log() ()
- Warning: [-1] No applicable service implementation found for type SERVER_STATISTIC. | 2015-02-16T19:28:26 | com.sap.ip.bi.pioneer.core.logging.CrBicsLoggingLocation.log() ()
- Verbose: Set DoNotUpdateSsoTickets to false for workbook | 2015-02-16T19:28:28 | com.sap.ip.bi.pioneer.excel.main.EaSession.ShutDown() ()
- Verbose: not NULL | 2015-02-16T19:28:28 | com.sap.ip.bi.pioneer.core.main.CrSession.SetInstance() ()

Advanced Analysis BICS and BI Java

Similar Messages

Maybe you are looking for