Advanced Call Manager on E71

I have the ACM installed on my E71. When I switch to "reject blacklist" mode, I have no problem. It works as expected. When I switch to "reject personal callers" mode, I have a problem. I have only 1 "active list", so when I switch mode from "reject blacklist" to "reject personal callers" mode, I expect the only "active list" that I have to be automatically the list to represent my "personal callers". However, I discovered that in "reject personal callers" mode, my phone rejected ALL callers, even those not in the "active list". Did I miss out anything, or do any steps wrong, or s there some software problem ? Do any of you with ACM on E71 have the same problem ? Any sharing will be appreciated, thank you.

yes my friend u r rite ............. u have to pay the moolah .....................
try if this helps
http://www.mobilecastle.biz/mobiles/symbian-os9-x-applications/47456-25-09-08-webgate-advanced-call-...
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Similar Messages

Advanced call Manager on E71-2 NAM

I have installed Advance Call Manager on my E71-2 NAM a couple of months ago and need some help. I also downloaded the manual. My problem is: I would like to have 2 profiles. #1 called "Day" where I can have the number of seconds before sending to answering machine mail set at 25. and #2 called "Night" where I can have the number of seconds before sending to answering machine mail set at 5.
When I set #1 to 25 seconds it is also changed in #2, when I set #2 to 5 seconds it also changes in #1.
I have been playing around with this for some time and finally decided to ask for help.
ps. The manual didn't help me, hopefully someone here can.
Thank you
Jim

yes my friend u r rite ............. u have to pay the moolah .....................
try if this helps
http://www.mobilecastle.biz/mobiles/symbian-os9-x-applications/47456-25-09-08-webgate-advanced-call-...
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

E71 backup SMS,Advanced call manager, Office probl...

Hi
I updated my Nokia E71, before updating I took a back up of my phone. After updating software when I restored back up Advanced called manager is not being installed it says certificate is experied, SMS messages are not being restored, Office is not working..... please advice how to get it working ?
Regards
Solved!
Go to Solution.

Dear
Welcome to the forum and thanks for your recent post.
You can backup your data and content but not for the program itself. Re-install the application and then restore the data/content.
It should be noted that some applications require a lincence and have trial period that must have been expired.
Please contact your local careline.
You'll need your IMEI number product code and they will set your license with you.
Both items can be obtain by typing (*#06#) from your device home screen.
Do let us know if you require further assistance.
Sincerely
Carl
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

E71 Advanced Call Manager...Mute but sound being t...

Hello friends,
I am using E71, and I am using this application Advanced call manager's latest version. I have noticed when it transfers the incoming call to voicemail through answering machine it does mute my mic, but it keeps sending/transmitting voices/sounds of my side to the call as if mic in reality is not on mute....but on screen I can see it says mic is mute as greeting is being played and caller is recording this message in answering machine. Please share the remedy how to make my mic actually mute when answering machine is playing the greeting and caller is recording the message ?
Regards

Has the program always been this way or did its behavior change recently? I use Blackballer Pro on my E73 (3rd Ed. FP2) for call blocking, and noticed a similar phenomenon. BB Pro can play back an arbitrary audio clip before dropping the call, and it also mixes-in room noises (from the mic) during playback. When I mentioned this to the programmer, he said that it's a function of Nokia's driver, and there is probably not a workaround. The issue varies from phone to phone. The inaccurate mute display could be a small bug. Assuming nobody has a better answer, you may want to contact the company behind Advanced Call Manager to get their opinion, too. I hope that helps.

Advanced call manager

Can advanced call manager be downloaded to N series Nokia mobiles free of charge ?
This fantastic program was available within my downloads! on my E71 , and I did the download free of charge, is it the same case with N series ?
Thanks in advance for your help

03-Oct-2008 08:54 PM
it_is_me wrote:
Can advanced call manager be downloaded to N series Nokia mobiles free of charge ?
This fantastic program was available within my downloads! on my E71 , and I did the download free of charge, is it the same case with N series ?
Thanks in advance for your help
i think the advance call manager with the E71 is a trial only, and ultimately it will require a license, you can try to download from Nokia Software Market

E63: Deleted Advanced Call Manager. Please Help!

I got my E63 and in a bid to check the optimal performance, I decided to remove all installed applications ("why would you do that?" don't ask me -- one of those crazy moments). After I removed the apps, I didn't see any marked increase in response time. So I decided to have them back on. And, lo! and behold! The applications I removed were gone from the app manager! I don't care about other apps, but I wanted to have Advanced Call Manager back. Is there a way to restore the app back to the App Manager? Thanks, Suresh

The following link is the E71 support/downlod site, but I know that the OS of E63 is identical to the E71's. So the advanced call manager should work perfectly.
http://europe.nokia.com/appmanager/UnitedStatesEnglishEUROPE_NOKIA_COM_3/Get_support;JSESSIONID_NCOM...!1782533979?_nfpb=true&_windowLabel=T305089368111234951438006&_pageLabel=P2341925&wsrp-urlType=blockingAction&wsrp-url=&wsrp-requiresRewrite=&wsrp-navigationalState=&wsrp-interactionState=_action%3D%2Fpageflows%2FEMEASupportTool%2Fbegin&wsrp-mode=&wsrp-windowState=
mgoksoy

The Advanced Call Manager by WebGate

I recently purchased the Advanced Call Manager by WebGate for the BlackBerry Pearl 8130, because of the Send busy tone, option & the Reply by SMS, option. I cannot get the Send busy tone, option to work @ all, it just sends callers directly to voicemail. And the Reply by SMS, option works, but not without sending callers to voicemail still, which totally defeats the purpose of why I got the program. Can anyone tell me how, I can get the Send busy tone, option to work @ all & without sending callers to voicemail. And how, I can get the Reply by SMS, option to work without sending callers to voicemail. Thanks.

do you have any lock/protection software in polace? say advance device lock?
if yes, remove ACM out of it. This should work

Advanced Call Manager and my E71x not getting alon...

I just bought a E71x and decided to give the advanced call manager a try. Found my phone on the Nokia website, noticed that it was listed FOR MY PHONE and figured, "Eh why not. Sounds cool enough." Installed it onto my phone through PC Suite no problem. Then went to run it on my phone and........ locked up after informing me it was a 30 call trial and asked me if I wanted to try or buy. I click try... nothing. I click buy.... nothing. Anyone got any suggestions?? Have since uninstalled the program.

you can contact nokia care line or use the 'contact us' button on the top right of this page. now i don't know if this is a nokia app. if it is not then i suggest you contact the developer directly and tell them what issues you are having. i know that you got it from the nokia site but it could have been some other company and nokia just posted a collection of apps for your phone. here are the links that you can use to contact nokia :
/discussions/board/message?board.id=topfaq&thread.id=3
hope you get it sorted out
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

CDR FIles in Call Manager version 7.1.5-30000

Good Morning:
I have a cluster of servers Cisco Call Manager version 7.1.5.30000; 01 Publisher and 02 subscriber. The publisher server passes CDR files to a call accounting application PC-SYSTEL on another server. At one point the CDR files are no longer spend the Call Manager to the application PC-SYSTEL
Call manager services are reviewed, the part of CDR Management in Cisco Unified Serviciability right. The only solution is doing a RESTART to PUBLISHER server, and then again go CDR files to the application PC-SYSTEL
Please anyone has any solution other than to give a RESTART PUBLISHER server, or is this the only way to restore this service.
Expect your news.
Thanks in advance for any ideas.
Regards.
Fernando.

Hi Fernando,
Please check the following.
(1) Confirm that the billing server is configured correctly (verify the IP address). From the Cisco Unified Serviceability page, navigate to Tools > CDR Management to view the billing server parameters.
(2) Check if you can ping the billing server from the Publisher. From the Publisher CLI, you can use the following command:
utils network ping a.b.c.d
where a.b.c.d is the IP address of the billing server
(3) Check if the FTP (or SFTP) service/software running on the billing server.
(4) Check if the billing server is running out of disk-space.
(5) Check if the CDR Respository Manager service is running on the Publisher. If not, start the CDR Repository Manager service.
(6) On the Publisher, check the 'preserve' and 'destinationX' (X can be 1, 2 or 3) directories for CDR flat files. For example: if transfer of CDR files to billing server is broken from Jan 6th, then use the following commands:
file list activelog /cm/cdr_repository/preserve/20110106
file list activelog /cm/cdr_repository/destination1/20110106
(if multiple billing servers are configuration, the location will be similar to above, but the corresponding directories will be named destination2, destination3). This location contains symbolic links to files under preserve. CDR Repository Manager service uses these soft-links to determine what files need to be transfered to billing server.
If you don't observe files in either the 'preserve' or the 'destinationX' locations for the specific date, then it means that problem does not reside on the Publisher. Either the CDR records were not generated by the server that handled the call or it could mean that CDR Agent service on that server could not transfer flat files to the Publisher. Was the 'CDR Enabled Flag is enabled in CallManager service' enabled on that particular date ? Is the CDR Agent service running on the node that handled the call ?
If you observe files in the 'preserve' directory for the specific date, try restarting the CDR Repository Manager service on the Publisher. If the file transfer to the billing server does not commence, then set the trace level for the CDR Repository Manager service to Debug, wait 10 minutes, download CDR Repository Manager logs via RTMT and engage Cisco-TAC for further troubleshooting.
HTH
Manish

No CLI Access to Call Manager MCS 7800

Hello, my client has a Call Manager server MCS 7800. We have access to the GUI, but the former IT Manager's network docu
mentation has an incorrect password for telnet access. How can we go about recovering or resetting this password?
thanks for any help in advance.

Bad news:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html#wp339319
Cisco Unified Communications Manager Does Not Support Recovery of Administration or Security Passwords
Cisco Unified Communications Manager does not support recovery of administration or security passwords. If you lose these passwords, you must reset the passwords, as described in the Cisco Unified Communications Operating System Administration Guide.
The Cisco Unified Communications Operating System Administration Guide calls the section, "Recovering the Administrator or Security Passwords," instead of "Resetting the Administrator or Security Passwords." Access the "Recovering the Administrator or Security Passwords" section to reset the passwords.
Find your version here and follow the docs.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_documentation_roadmaps_list.html
For 7.1.2, that would be here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/7_1_2/cucos/iptpch2.html#wp1044244
Hope this helps....

Cisco Call manager migration

Hello All,
my company recently acquired a call manager 9.1 with the appropriate new hardware .We have an existing one that is going out of life cycle with version 6.1.5 . I need your advice , how is the best way to migrate from 6.1.5 to 9.1 if there is a way at all .I do not want to update the 6.1.5 , i want to migrate all the data to the new machine with 9.1 .I have search all over the internet for such topic but i can not find one.
Your help is much appreciated
Thank you in advance

Hi Kamen
This has been covered many times in this forum - however to give you a few pointers:
You cannot automatically migrate a 6.x CUCM config to one of a different version. You can only migrate exactly the same version between different hardware platforms.
The "normal" mechanism to upgrade from 6.x to 9.x would be to either upgrade your existing server to 9.x, backup using DRS and restore onto the new hardware, or, install 6.x on your new hardware, backup / restore and then upgrade to 9.x
It is quite possible that your new hardware will not run the latest version - in which case, you can sometimes upgrade to an interim release first - e.g upgrade your current version to 7.1(5), install 7.1(5) on your new hardware and do the backup / restore. Then upgrade your new hardware to 9.x.
If none of the above is possible, then you can use BAT to export out most of your current config, and then import into the new server. Note that BAT will not export everything (e.g. route patterns) and some things must be done manually. There also used to be issued in using BAT to export some security related parameters (e.g. PINs) and export them into a higher version. Note that this is a VERY time consuming process.
Hope this helps.
Barry Hesk
Intrinsic Network Solutions

Cisco Call Manager TFTP requests.

I was looking to see if there was a way to look at what devices request config files from a Cisco Call Manager TFTP server.
I know that you can use RTMT to look at the total number of requests made, but is there a way to know what device make the request.
Thanks in advance,
Robert

You could do this by doing a packet capture on the server as described in the link below
https://supportforums.cisco.com/docs/DOC-11599

Cisco Call Manager and LifeSize Endpoints

Hello dear support community,
last week I asked which version of Cisco Call Manager supports BFCP (https://supportforums.cisco.com/message/3966334).
Unfortunately I asked the wrong question.
As it turns out I just didn't need to know which version of Call Manager supports BFCP, which I know now, I also need to know if Call Manager is compatible with LifeSize systems?
Here is the setting, so you know what I'm dealing with:
The costumer uses Cisco Call Manager (Ver. 9.1) as SIP registrar for his LifeSize endpoints. The problem is, when he is making a video conference (via SIP) and he wants to share a presentation, the other side either sees him or the presentation, but not both.
We tried it with our Call Manager (Ver. 9.0) and some LifeSize endpoints. As soon as the LifeSize endpoint uses CUCM as SIP registrar, the option to share the presentation is completely gone.
I guess the costumer switched sources from cam to pc. That would explain why he just sees either video or presentation. But, as you might have guessed, it's not an acceptable solution for the costumer.
And yes, we made sure that BFCP is enabled for the endpoints.
So, what I'm asking myself and you is:
Is this known? And more important, is there a reliable workaround?
Thanks a lot in advance.
Best regards
Tobias

I've been down this road and when I asked the question Lifesize's stance was that it wasn't supported by THEM. I pointed out that CUCM now supports line-side BFCP but they essentially shrugged their shoulders. Either they are blatently disabling content sharing by virtue of using a SIP Proxy or they have a priorietary SDP/header that CUCM isn't passing through.
Either you can call Lifesize and shake them up a bit or you can wireshark the SIP dialog to see what the codec asks CUCM before disabling the sharing button. Once you know that you might be able to use SIP transparancy to pass the header through.

Cisco call manager express : desactivate silencious mode in Ip telephony

Hello All,
I configured cisco call manager and it works well. I would like now not to allow users to make their phone in silencious mode by using down volum. May I do it with cisco commands lines? Thanks in advance for any help.
PS : I have a Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.2(3)T1, REL
EASE SOFTWARE (fc1)
Regards.

Hi Carl Messer ,
just one doubt, in fast track method can we give any phone model with any protocol(sccp,sip) type as a reference?
for example for 8831 sip phone reference phone type given is 7937 which is a SCCP phone so my doubt if i gave 7975 sccp will it work?
from above thread:
voice register pool-type 8831
xml-config maxNumCalls 2
xml-config busyTrigger 1
xml-config custom sshAccess 0
num-lines 2
description Cisco IP Phone 8831
reference-pooltype 7937
voice register pool 1
busy-trigger-per-button 1
id mac ####.####.####
type 8831
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
description 233
codec g711ulaw
no vad
Rgds
Vigeesh

How to extract 911 report from Call Manager

Hi, It has been requested I provide a report showing only 911's and where they are originating. Does Call Manager have a utility I can use to extract this data?
Thanks to all in advance, it is greatly appreciated.

Hi Ross,
This is the only method that I know of to do this type of search (in CCM);
Using SQL Queries to Search the Call Detail Record with Cisco CallManager
Search for Calls Made to a Specific Number
In some situations, you might need to find out the extension which called 911 on a specific date. Complete these steps in order to search for calls made to a specific number such as 911.
In order to search for calls that are made to a specific number, you can run a different query.
For example, if you want to look for calls to 911 you can enter the query select * from CallDetailRecord where finalcalledpartynumber='911'.
The bottom of the page displays all the entries in the CDR that have the final called party number equal to 911.
Add a date to this query in order to refine it.
For example, for all calls to 911 after August 1st, 2003, run the query select * from CallDetailRecord where finalcalledpartynumber='911' and datetimeconnect > '1059696000'.
The bottom of the page displays all the entries in the CDR that have the final called party number equal to 911 made after August 1st, 2003. '1059696000' is the universal time in seconds for August 1st, 2003.
In order to see who calls 911, run the query select callingpartynumber from CallDetailRecord where finalcalledpartynumber='911'.
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801d71c5.shtml
Hope this helps!
Rob
Please remember to rate helpful posts.....

Advanced Call Manager on E71

Similar Messages

Maybe you are looking for