Advanced EQ settings on X-Fi car

I have an odd question. I'd like to know if it's possible to import an Audigy Advanced EQ file into somewhere in the X-Fi software. I had grown particularly fond of one Advanced EQ setting, back with the old Audigy "CTPanel" applet, I've exported the file, and I'd like to tweak my EQ settings according to my old Advanced EQ file. Is this possible at all ?

Anyone have any information about this? If it's not possible, I'd like to know.

Similar Messages

  • N73 "advanced" camera settings ?

    I have recently got an N73 for myself to replace a **bleep**py V3. Quite a complex phone to get around - my last Nokia was a 6310i - but the one area that disappoints in the camera software.
    I notice that on the N80, which is basically the same camera and Symbian OS, there are a range of advanced camera settings which do not exist on the N73. Specifically, the ones that interest me are "sharpness" (which should be set to none / minimal for any descent chance of a good photograph) and the JPEG quality setting. Saturation would be nice too, but hey.
    It feels like they are set to "high" and "low" respectively - which is great for a consumer's "gosh! wow!" type thing but speaking as a keen photographer it makes the N73's camera pretty useless except for taking pictures of car accidents and documents.

    Am I sure about documents in what sense ? The N80 manual clearly mentions a sharpness setting and I threw the JPEG quality / compression parameter in as an example of a good thing to be able to change. Perhaps you can expand on your question ?

  • Command to set modify Advanced Security Settings (Audit Settings for folders) on windows 2008

    Hello,
    We have requirement to modify  Advanced Security Settings (Audit Settings for folders) on windows 2008. I am looking for a command which does this job.
    I know, using group policies I can do this; in fact I had done this using group policies. However, I need to do this on number of servers which are not in domain. There are around 15 folders on which I need to enable Auditing; manual editing folder advanced
    permissions is a cumbersome job. Hence, I am looking for a command line options.
    I need to know how command can be utilised to enable Audit option on a folder. Please share a command which can do this; once I get the command, I will create a batch file for other necessary folders. (BTW, this is not a scripting question, I just need to
    know the command hence, please do not re-direct me to scripting forum)
    Manually through GUI, I am setting following.. snaps are given below
    Thanks !

    You can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
    This
    posting is provided "AS IS" with no warranties or guarantees , and confers no rights.   
    Microsoft
    Student Partner 2010 / 2011
    Microsoft
    Certified Professional
    Microsoft
    Certified Systems Administrator: Security
    Microsoft
    Certified Systems Engineer: Security
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows 7, Configuring
    Microsoft
    Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
    Microsoft Certified IT Professional: Enterprise Administrator
    Microsoft Certified IT Professional: Server Administrator
    Microsoft Certified Trainer
    Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
    Thanks !

  • How can I access Advanced Javascript Settings?

    I'm aware that, in recent versions of Firefox, the ability to disable Javascript has been removed. I don't intend to re-open discussion of that particular decision. But removing that option has also removed access to the Advanced Javascript Settings menu, which was far more useful than simply disabling Javascript itself. For example, although I rarely disabled Javascript entirely (other than when debugging my own site), I routinely disabled the ability of websites to disable context menus or to move and resize pop-up windows.
    Unlike disabling Javascript entirely, these are settings which provide a positive benefit for "ordinary" (non-developer) users. If, say, I want to open a link in a new tab, then the correct way to do that is to right-click on it. Sites which disable right-click degrade the user experience, and allowing a way to override that is a good thing. Whatever the justification for removing the ability to disable Javascript entirely (and I do understand it, even if I don't agree with it), I can't see any justification for removing access to these advanced settings.
    So my question is, how can I re-enable access to the Advaned javascript Settings? I can't see any obvious setting for it in about:config, and simply disabling javascript entirely via that method isn't what I want to do.

    The href value javascript:void(0) is a placeholder to be shown when you hover a link, so you can see that this is not a normal link.<br />
    The actual action is done via an onclick handler that is tied to the button (link), so if this isn't working then this can be caused by a script that didn't run properly to add this onclick action to the button or that JavaScript is blocked on that website possibly by an extension.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Note that there is also security software that can block pop-ups and JavaScript, so check that as well.
    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.

  • In Firefox 2.0+ you can go to Advanced JavaScript Settings and check a box to allow scripts to change status bar text. How do I do this is Firefox 10.0.1?

    In Firefox 2.0+ you can go to Advanced JavaScript Settings and check a box to allow scripts to change status bar text. How do I do this is Firefox 10.0.1?

    Two items in the Advanced JavaScript window were removed as of the Firefox 4.0 version, but they are still available thru about:config .
    Type '''about:config''' in the URL bar and hit Enter. <br />
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''dom.disable_window_status_change''' = double-click to toggle to '''false''' to allow websites to mess with status text.

  • Acrobat Pro - advanced print settings

    Hello,
    my system: Adobe Acrobat Pro 10.1.7
    I want to change the settings under file - print - advanced
    the settings under "Acrobat default" and "Custom" are not modifiable
    do someone know how it works?
    thanks K.W.

    Only the fields supported by the selected printer driver are active on that dialog; for example if you don't have a PostScript printer, that section is turned off.

  • Setting "Advanced security settings" on an OU using Powershell

    Hello,
    I have been tasked to create an OU with the simular permissions as another. On the current OU, the admin1 acount has special permissions (set within the Advanced Security Settings). For the new OU, they want a new admin2 account to have the same permissions
    on the OU as admin1 has on the current OU.
    I was able to extract the OU permissions using the following Powershell script:
    Get-QADObject 'OU=Temp,OU=,OU=Group,DC=Department,DC=Company,DC=com' -SecurityMask Dacl -sizelimit 0 |
    Get-QADPermission -Inherited -SchemaDefault |
    Select-Object account, rights, source, appliesto |
    Sort-Object account |
    Export-Csv c:\temp\report.csv -NoTypeInformation
    However, Powershell script did not provide the "Advanced Security Settings". Therefore, I am looking for a couple Powershell commands that:
    1. Copies the permission entries of the Advanced Security Settings Properties on an OU
    or
    2. Sets the permission entries of the Advanced Security Settings Properties on an OU
    Any help would be greatly appreciated.
    Mxer4life

    Hi,
    Please try with the following code to copy the atestuser1's ACL on TempOU1 and assign atestuser2 on TempOU2. Please be advised to test in your lab/test environment first. I tested only once. :)
    $ou1 = [adsi]"LDAP://OU=TempOU1,dc=adatum,dc=lab"
    $user1 = 'adatum\atestuser1'
    $ou2 = [adsi]"LDAP://OU=TempOU2,dc=adatum,dc=lab"
    $user2 = 'adatum\atestuser2'
    $acl1 = $ou1.psbase.ObjectSecurity.Access | ? {$_.IdentityReference -eq $user1}
    Write-host ($acl1 | out-string)
    $acl2 = $acl1 | % { New-Object -TypeName System.DirectoryServices.ActiveDirectoryAccessRule -ArgumentList ([System.Security.Principal.NTAccount]$user2), $_.ActiveDirectoryRights, $_.AccessControlType, $_.ObjectType, $_.InheritanceType, $_.InheritedObjectType }
    Write-host ($acl2 | out-string)
    $acl2 | % { $ou2.psbase.ObjectSecurity.AddAccessRule($_) }
    $ou2.psbase.CommitChanges()
    Write-host "After update with $user2"
    Write-host ($ou2.psbase.ObjectSecurity.Access | ? {$_.IdentityReference -eq $user2} | out-string)
    rgds,
    AZ

  • "Authentication Type" greyed out in Advanced Wireless Settings (WRT54G)

    I wish to change my Authentication Type from Auto to Shared Key in my Wireless -> Advanced Wireless Settings section of my web-based admin utility. However, it's been greyed out for some reason.
    I understand that the Shared Key mode is more secure than the Auto mode, therefore I wish to change it. Would anyone happen to know as to why this would be greyed out like this and how I can fix it so that I can have access to the options? I'm using WRT54G V.6 with firmware v.1.01.1 (the latest one from linksys). TIA.

    I think I figured it out. I'm currently using WPA Personal mode and as I understand it, only WEP mode applies to whether you're using an Open System or Shared Key. Can someone please confirm this for me? TIA.

  • Can one set up Lightroom to allow use of manufacturer's printer profiles and Advanced Color Settings

    I like the effects that I can apply to my B&W images using Advanced Color Settings, but understand that I get best print quality using the manufacturer's paper profiles. However, I get locked out of Advanced Color Settings unless I choose "Managed by Printer". Can I do both - select a specific paper profile and use Advanced Color Settings? Thanks

    I don't know what printer you are using. But if you want to use all of the controls in the Lightroom print module you need to let Lightroom manage the color. For my printer, this requires making that choice in Lightroom and then disabling color management in the printer driver. Then, using Lightroom, I am able to use all of those settings and choose the appropriate profile provided by the paper manufacturer.
    With my printer, if I choose to let the printer manage the color, I can make all of those choices in the printer driver. But you cannot split your management between Lightroom and your printer.  You have to go one way or the other.

  • Advanced print settings not working in cs6

    Since updating to Yosemite, I cannot access the advanced print settings for my Epson 3880.  I have the latest driver for the 3880.  No longer can select the paper, profile, etc.

    Problem Solved:
    After uninstalling a previous version of Labview Runtime from the target machines and installing the newest version (which is consistent with my development environment) on the target machines, the Print Report.vi and all other report generation VI's I use seem to work fine.
    Also important is to make sure that the lvrt.msi file on the development machine is up to date and consistent with the version of runtime on the target machines. This does not update automatically when upgrading to a newer version of labview (at least not when I updated from 6i to 6.02). It must be manually downloaded and inserted into the proper folder.
    Thank you Ray at NI support.
    Tom S.

  • Need clarity on advanced airport settings please.

    I have an intel imac ( n), macbook (n) , iphone (g), apple tv (n) and airport express running a set of speakers.
    I have just upgraded to a new dual band AEBS from the old UFO one.
    All works really well, and macbook to mac speeds seem 3-4x faster. All good.
    BUT, confused about one of the advanced manual settings - "wireless network options".
    Radio mode and radio channel are set to automatic, but I went into WNO and selected 5GHZ network name. Now I see 2 networks on my imac - the normal one and the 5GHZ one.
    Does this mean that I have to manually select the correct network now, or will the devices jump from g to n as required?
    Is there any point of having the second network named? or does this force compatible units to use the faster speed?
    It all works, I just want to get the best out of it.
    Ta.

    Radio mode and radio channel are set to automatic, but I went into WNO and selected 5GHZ network name. Now I see 2 networks on my imac - the normal one and the 5GHZ one.
    Does this mean that I have to manually select the correct network now, or will the devices jump from g to n as required?
    That is correct. You would now have to manually point the wireless client to which network you wanted them to connect to.
    Is there any point of having the second network named? or does this force compatible units to use the faster speed?
    One of the reasons you may want to have two separate Network Names is to "force" a wireless client that is capable of connecting to either to connect to a particular radio instead. Another is that you want to use each network for a different reason. For example, you may want to use the higher bandwidth 5 GHz network for streaming video or for gaming, and then, dedicate the lower bandwidth (but greater range) 2.4 GHz network for general computing and Internet access.

  • Where have the Quicktime advanced export settings gone in Keynote 6.3?

    Where have the Quicktime advanced export settings gone in Keynote 6.3?
    In previous versions, it was possible to select numerous options and setting to export a high quality Quicktime video.

    The new version 6 and the previous version 5 can both be installed, many users use both to utilise the different features. If you had the previous version installed and have not deleted it is located in iWorks in the Applications folder. If you don't have the previous version it is available from Ebay.

  • DEP, M55, Advanced Bios Settings

    Thinkcentre M55,  Windows XP
    Does the M55 use Hardware-enforced DEP?
    For some reason DEP can't be disabled or modified from Windows XPs GUI or  boot.ini switches.
    Boots  back to it's default setting of On  and  OptIn (default configuration) Only Windows system components and services have DEP applied
    Also looking for some detailed documentation or articles related to M55's Bios and the advanced bios settings.

    Hello Sirald66,
    I understand you want to disable wake-on the keyboard, is that correct? I will assist you with this inquiry.
    There is not an advanced bios settings available for your current system bios, a possible future upgrade might make it available.
    If I understand you correctly on the keyboard issue, you can make those changes in the device manager.
    1.       Open device manager, if you are unsure how to get there have a look at this link.
    2.       Scroll down to keyboard section.
    3.       Click on arrow to the left of keyboard to expand section.
    4.       Right click on keyboard, and then go properties.
    5.       At the top of the next window go to the power management tab, and the option should be there to uncheck.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • No Internet - Cant change Advanced Network Settings

    Since today some of the programs on my Mac Book Pro cant reach the internet (e.g. mail, safari) - some work (skype).
    (I think this might be a corrupt port:80 configuration.)
    I cant change or deleted any configurations in the advanced network settings. Every time I delete a network or change something else an click on "Apply" - its the old settings again.
    Any suggestions?

    Hello Yobu & welcome to the forums.
    Make sure that Skype/Growl are the most newest versions that are fully Snow Leopard compatible.
    Try resetting some of the hardware involved (PRAM~NVRAM). See this Apple KB for details, etc.:
    http://support.apple.com/kb/HT1379
    Can't hurt to try, and apparently this has helped others recently.
    As well, have you done due diligence on the basics.... confirm sufficient free space on the HD; validate disk health via DiskFirst Aid, never install SL from downloaded torrents/betas, etc. Let Spotlight finish indexing; clear out old cache files and outdated/broken/duplicate fonts; find and delete related plists.

  • IPad loses advanced mail settings

    I have set up e mail on my iPad from my own domain Rogersfamily.uk.net.  The advanced main settings that define that the POP server uses password authentication keeps getting lost.  I re-enter it again and it stays for a while then gets lost again.
    Any ideas what the problem may be?

    I have set up e mail on my iPad from my own domain Rogersfamily.uk.net.  The advanced main settings that define that the POP server uses password authentication keeps getting lost.  I re-enter it again and it stays for a while then gets lost again.
    Any ideas what the problem may be?

Maybe you are looking for