Advanced Formatting and Positioning Question

I have an image that I want to display at the bottom of every invoice page. I run into a problem when the invoice goes over 1 page. The image is displayed in the middle, or at the top, depending on the number of lines. I've tried to anchor my image, but that means my image is displayed at the end of every page.I've tried the last page option as well, which leads ot my image on being displayed at the end of the document.
Any ideas?

Hi,
I've similar issue. I need to print footer text at end of every page. I do not want to use footer due to some other requirement in my template.
Instead I am looking for 'ANCHOR'. Could you please let me know how did you anchor your image to get displayed in every page?
Regards,
Pratul.

Similar Messages

Video format and another question

I saw someone else ask what video format photos for iOS supports but i had a couple of extra questions so didn't want to hijack his.
I've been using aperture for years but my library was really messy, i'm loving photos overall so far as i hardly used the features in aperture and the interface looked a bit dated. Sharing photos was also a bit of a nightmare compared to the new photos app.
Anyway instead of importing the whole aperture library, which i didn't want to do as it was messy, i decided to start fresh with a new photos library and just copy/drag the photos over from my aperture albums/folders. Firstly, am I right in assuming when i do this, it will actually hardcopy the photo over into the photos library and not just a link or a soft copy from aperture? Therefore i can delete the aperture library once all photos are copied over and i will still have all the original photos in the new app? Just to note, i didn't use referenced files in aperture.
Secondly, unless I'm being really stupid, none of my older videos taken on IPHONES seem to copy over, even from just last year using an iPhone 5. the format seems to be .MOV.
Now, SURELY, apple are not going to release an photos app that DOESN"T support the importing of videos taken on their own phones from just a few months ago?

Hi. Your understanding of how the copies from your old library are not quite correct, but the bottom line is you would be able to delete your old Aperture library afterwards (or at some point, which might be a wiser approach). I used iPhoto not Aperture so I'm not sure if it's the same but take note of what you are actually exporting so you keep any GPS, date, keyword information etc. etc. you might have added.
Some have encountered this movie issue and found that simply exporting it to the desktop before adding it to Photos is enough, others have found the export to the desktop works but not the import into Photos and have had to use Quicktime to export it again to an Apple Device compatible format. Clearly the videos should be supported, I don't believe Apple have decided not to but rather that something has/is going wrong.

Advanced dreamweaver and php question

Hi I have a portal type of website for hairdressing and
beauty industry.
I am wanting to know if it is possible to have one register
form so that the the user can use more than one area:
Register for Directory/Classifieds - free registration and
use except for banner advertising
Register for Article Manager - free registratiion and use
Register to Search CV's - free registration and paid service
on a time limit
Register to place Job Advert & Search CV's - free
registration and paid service on a time limit
Register to place CV online for employers to pay and search -
free registration and use
I am currently using radio buttons to have all listings
inactive until approved by me to then change to active. Users on
registration can list their CV, Job Ad and Article but won't be
shown live until then. Job Ad, CV Search is a paid feature so I was
thinking of having session variables assigned to them.
I also have a radio button for the Job Ads and CV's that they
can hide or show public so that it is only shown live when they
need it to be.
Lastly I was going to have a radio button for expired or
notexpired so that when someone has registered and can still log in
to the system if it is expired there will be a note saying to renew
payment.
I know this sounds a lot but I would love that there is one
registration for customer convenience, one may want to place a
listing, article and search for CV's.
Lastly I am allowing the jobseekers to place their photo
portfolio of their work e.g. hairdoo's, make-up etc.
I want to allow all viewers to search and see these ( I will
try to watermark them for copyright ), but when they click on the
link they have restricted access to the CV until they pay.
I hope somebody understands what I mean, I guess I need to
restrict acces depending upon registration type and what would be
available to them.
Thanks for your time.

jjjhbj111 wrote:
> I understand the Restrict Access to Page behaviour but
can someone have more
> than one access level?
Not with that server behavior. You would need to set access
levels based
on what a user is allowed to see. Level 1 for basic access,
level 2 for
a slightly higher level, and so on. If you want to have
different codes
for each type of access, you would then need to code all your
conditional statements by hand.
> I can't quite understand if they are already logged in
and they go straight to
> payments and return how the access level will change. Is
it because I do a
> mysql_insert_id()
It depends how you get acknowledgment that they have paid.
You already
know the current access level and user id, so use the payment
acknowledgment to trigger an update to the higher access
level.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Negative values in red and Positive values in black CONDITIONAL FORMATTING

Hi ... Everyone
I have to show Negative values in red and Positive values in black in one of my report.
i tried these conditions
1. <?if:GAIN<0.00?><?attribute@inlines:color;'red'?><?end if?>
but it shows negative values only in red ,positive values in black are missing
2. <?if:GAIN<0.00?><?attribute@incontext:color;'red'?><?end if?><?if:GAIN>0.00?><?attribute@incontext:color;'black'?><?end if?>
This gives the exact result what i wanted ...but the problem is i have five tables in my report ... so the above condition only allow changes in ONE TABLE ONLY. :(
Plzzzz anyone who can help me to sort out my problem or else SUGGEST ANOTHER WORKING CONDITION
Regards
Subham Mittal

Subham,
This should not be difficult and moreover the BI Publisher Desktop installation comes with a set of examples:
Start -> Programs -> BI Publisher Desktop -> Samples -> RTF Templates -> Advanced -> Conditional
There you can find two templates with the exact same situation like yours, highlighting either the foreground color or background color.
regards
Jorge

Advanced Format Conversion - PAL - NTSC question

I need to convert from DV PAL (@ 25fps) to DV NTSC (@ 23.98fps).
My first test conversion resulted in a DV file running at 29.97 fps.
Also, I seem unable to modify the speed settings in order to re-time from PAL to NTSC, which should run approximately 4% longer.
Can somebody guide me through how to achieve this?
G5, dual 2.7 Mac OS X (10.4.9) Final Cut Studio 2.0

Marc:
AFAIK standard DV NTSC is 23.97 fps, why do you need 23.98?
The best free way I found is with Compressor Advanced format conversion, using the settings you'll find in this thread posted by Andynick:
http://discussions.apple.com/thread.jspa?messageID=3055477&#3055477
Export your timeline as Quicktime Movie, same settings (self contained if you have space) and use that in Compressor.
Hope that helps !
Alberto

Backup and Restore image fails 3TB Advanced Format Drive Windows 7-32 SP1

Windows native backp fails to create an System Image, or a Complete PC Backup.
This occurs in Windows 7, 64 bit Professional, Windows 7, 32bit Ultimate, Windows Vista Business, 32 bit. It occurs in 6 different computers I've tried. All the backup drives are 3TB. I have tried Seagte USB and Hitachi USB drives. 4 of them. The Windows
7 Ultimate, 32bit machine has SP1. All operating systems are using the current Service Packs, and all of the MS Updates including all of the recommended harware drivers. All of the systems are using the latest BIOS, firmware and OEM drivers as well.
It looks like the issue may be causes by a deficiency in Windows related to the Advanced Format drive spec. All of the computers that qualified had the AF hotfix applied; Advanced Format Drives 512e 4k, Vista
and 2008 - KB2470478, Windows 7, and 2008 R2 KB982018
Error messages follow:
The Backup Failed.
Error message: One of the backup files could not be created. (0x8078002A)
The request could not be perfomed because of an I/O error. (0x8007045D)
This deficiency seems to apply across the board to different hardware manufacturers of external hard drives.
From what I have heard, Western Digital may have a format utility that addresses this issue, but only for WD drives.
Help.

Hi David,
Did you have found any error message？
Check if all the files have been created on the hard drive.
Check the Volume shadow copy service in services window. To check follow these steps:
i.
Click Start and type services.msc in the search box
ii.
Search for the Volume shadow copy service
Make sure the start- up type is automatic. Steps to set the services to automatic
i.
Search for the service
ii.
Right click on the service
iii.
If the service is stopped then Start the service
iv.
Select Properties
v.
And in the Start-up type select Automatic
This is the most definitive answer I can find so am taking this as the answer.
http://social.technet.microsoft.com/Forums/en/windowsbackup/thread/889b01be-d333-4fc7-b005-e12b7b236ad7
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/444e8ea2-6417-45dc-83d4-f5ae45bbaa02
Thanks,
Jeff
如果您对我们的论坛在线支持服务有任何的意见或建议，请通过邮件告诉我们。
立刻免费下载
TechNet
论坛好帮手

PS3 and Advanced Format Issues (scorpio blue 500gb)

I just bought a scorpio blue 500gb that has advanced format i.e. 4k sectors and it is not working correctly with my PS3 slim with 4.75 firmware. I believe it's due to the advanced format tech used on the drive. Symptoms are constant corruption, PS3 rebuilds the database often after a cold start.very slow boot up sometimes, not everytime, but sometimes the drive indicator is solid for a long time and the screenstays black, sometimes it won't boot at all. I put a older scorpio blue 320 from 2008 and all the symptoms went away. The 500gb seems to work just fine in a USB enclosure when I format it on windows. Is there something special that needs to be done to these advanced format drives for the PS3?

Hi,
As a recommendation, check on the PS3 forums to see if they have any specific information about this. I haven't seen any post about this on the community.

Online format and AJA HD question. Which HD is right ?

I am supposed to deliver an output in HDCam SR, 24P format, 4:4:4 color space in 16:9 (1.78:1 full frame)
I am running a HD AJA card, but get different formats in the FCP selection box such as HD (960x720) , HDTV 720p, HD (1280x1080), also with the compression settings I`m not sure if I should use the AJA Uncompressed 8 or 10 bit which are only 4:2:2
My current timeline has stock footage in 720x480 29.97 and HD 960x720.
The offline was cut in a 720x480 NTSC DV (3:2) Anamorphic 16:9 CCIR 601
Is it easiest to just change the offline timeline format and then re-size all the clips? and what of the above formats should I use?
Thanks for any help,
Sincerely
Christian

I already have all the footage in high res on the system, since I captured it right of the Panasonic HVX200 camera and the P2 cards. I just did the editing in a low res timeline. So no re-capture needed. But what I`m not sure of is what the right HD resolution is that they need for HDCam SR. Is it 960x720, or 1280x1080,... 24P or 23.98,... ?

Newbie Questions - Interlacing, Formats and exporting to iDVD

Sorry everybody, but I've got some issues. I'm new to Final Cut Express but I have a decent knowledge of digital video formats and resolutions, etc. I'm going to try to give as much information as possible so as to make your jobs easier.
I'm putting together a project for work that is using NTSC DV (4:3, 720x480) that I didn't shoot myself as well as a number of photographs (6-8 megapixels). I originally put the timeline together in iMovie '08 then exported as XML to FCE. I moved the pictures around using keyframes to create what iMovie likes to dub the "Ken Burns" effect (although I somehow doubt that he was the first to use it). The project is only about two and a half minutes long.
I read up on the best way to export to iDVD and found that creating a Quicktime reference movie then directing iDVD to that seems the best way as you're not encoding the video twice. Unfortunately, the final product ends up extremely choppy and interlacing artifacts are everywhere (especially in the photos). I tried playing on an actual television, thinking my iMac just wasn't de-interlacing the image correctly, and it still looks just awful and horribly choppy.
What did I do wrong?
Help!

Thanks for a quick response. The problem is apparent through the whole video, both video and still images. In Easy Setup it was set at DV-NTSC. When I exported from iMovie it basically just kept the videos at their right place in the timeline, the photos, text and music didn't move over, so all of that was imported in FCE as you thought.
I would describe the problem as being extremely jerky. Not starting and stopping, just horribly un-smooth (that's not a word). But I don't get those big macroblocks like when something is encoded at a low bitrate. Especially when panning over still photos, strait lines get very, very aliased. It draws a lot of attention to edges and lines in the photo.
If, instead of just creating a reference movie, I export as H.264 and choose "DeInterlace Source Material" it does seem a little smoother, but the photos still look pretty bad.
Thanks again for any help.

Question for load VRML file with scale and position missed

Hi,
I trid to read a .wrl file from the "load VRML" vi, most simple .wrl models can be correctly read but for some more compliacted models their scales and positions were incorrect.
I attached the file which I read the .wrl file and a car model from Matlab Virtual Reality toolbox. The file can be read but their position and scale was missed. I check this model on other VRML readers and I believe the car model is correct. Does anyone know how to fix this problem?
Thanks,
-Alex
Attachments:
VRMLproblem.zip ‏88 KB

Hi Yi Y,
Thanks for your reply.
The attached files are the correct .wrl file and the one read from LabVIEW.
The colored is incorrect, the car is seperated to some parts, and the scale of some of the parts are wrong.
I think you can use any .wrl reader to read the wrl file I posted, all the reader I tried can read it successfully besides LabVIEW.
In the vi I have you can try to adjust the scale or rotate it then I think you can find the seperated car parts.
I will appreciate if you can give me any suggestion. Thanks,
-Alex
Attachments:
original.JPG ‏110 KB
readfromLabView.JPG ‏74 KB

Format Sound.position and .duration into time

Hi,
How would i go about formatting Sound.position from
milliseconds into proper time like 1:30 for 90 seconds?

i have figured it out if anyone else wants to know...
where timeString is the Sound.position in
milliseconds!

Advanced Format Hard Drive not recognized by HP DV6000 Controller

Hello,
I have an HP DV 6000 laptop (6276 I think, I'm at work can't check) that came preinstalled with a Western Digital 160gb 1.5gb/s 5400 RPM drive (Vista) that failed a couple of weeks ago. So i bought a Western Digital 750 GB WD Black SATA III 7200 RPM 16 MB drive to replace it. I read about people having some problems with Advanced Drive Format hard drives not being recognized by their controller, but also read that depending on the controller and specific Dv6000 model laptop they had-one wouldn't run into problems.
Well sure enough, when attempting to install Windows 7 I received the error that the hard drive was not detected. After researching online I came across an article on WD's site that noted
"Our SATA II hard drives use autospeed negotiation. This enables our SATA II drives to automatically detect the motherboard data transfer rate, making it backward compatible with SATA I data transfer rates. However, some older SATA I controllers are unable to support autospeed negotiation and cannot recognize the drive. This “drive not detected” condition occurs when a chipset is incapable of correctly negotiating the data transfer speed with a SATA II hard drive."
my drive is a SATA ||| but I'm pretty sure it's the same problem. The site goes on to say a fix would be to "purchase and install a third party PCI or PCI-Express Second Generation Serial ATA controller card for your Serial ATA hard drive(s)."
My question(s) are.
1)Is the problem that I am trying to install a Sata ||| hard drive on a laptop with a controller that will only recognize SATA | hard drive?
2) Or is the problem that the hard drive is an Advanced Drive Formatted hard drive and I need to buy a hard drive with out that specification?
3) Or Should I buy a SATA controller card as WD suggests on their website and if so will this definitely allow my laptop's controller to recognize the new hard drive and proceed with the installation?
4)Or Should I just return the hard drive and buy a SATA | non Advanced Drive Format hard drive? (question 2 basically)
Thanks for your help!

Hi @jasmine00
Welcome to the HP Support Forums.
I certainly understand your issue with the drive upgrade. Unfortunately it is a bit of the nature of notebooks, the sacrifice of a large amount of upgradeability, in exchange for compactness and portability. Whenever a new technology comes out, older notebooks are never really going to be easy to upgrade, it at all. Normally the unit as a whole is tested with a set list of hardware, and only those items are supported.
That being said there is this document that could be helpful with your problem.
Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
And for your reference:
HP Pavilion dv6000 Notebook PC Maintenance and Service Guide
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

BEx Analyzer - Aggregation of Negative and Positive Values

Hello Gurus,
I have a key figure 0Subtotal1. This KF contains both negative and positive figures.
For eg; +10, -20, -30.
In Query Analyzer, I need the column total as 60 and not
-40.
Can I use a formula and use the ABS function...
Any clue....
thanks in advance.

hi BW,
u can make -ve sign as positive in the query.
Go to query properties in the query designer, then click on display tab->there u will find in the number format block settings for the display of -ve numbers....u can change them to positive there...
reward if it helps,
ajay

Another Iphoto '11 and PSE9 Questions

I'm running the latest version of iphoto '11. Just installed PSE9 and all of the updates.
I've made PSE9 the external editor in iphoto.
In the PSE9 prefs, I set:
- the color picker to apple's
- set on first save to save over current file
When I want to edit a JPEG file in iphoto, I select the file, and click on the edit button in the bottom corner. Iphoto duplicates it (that is fine) and the picture comes up in PSE9. I edit it (draw a big snowflake on it), and then select File -> Save. (Not save as). A save dialog pops up.
QUESTION 1) I thought the save dialog should NOT pop up? Help?
QUESTION 2) In the same dialog, the format is set to photoshop. If I click save, the changes don't show up in iphoto. Make sense-- it is in photoshop format. Should I have to manually select JPEG everytime? It doesn't auto select it?
If I change it to jpeg and click save, and then click ok on the jpeg option window, the file saves and I see the changes in iphoto.
In iphoto, if I now select the modified photo and select edit, it doesn't make a duplicate first. I guess it knows not to?
I edit the photo in PSE9 again (add another snow flake) and select file -> save.The save dialog pops up again and photoshop format is selected. If I select JPEG, the name now changes from IMG13_3.jpg to IMG13_3 copy.jpg.
Question 3) If I save it, it is a new file, and the changes don't show up in iphoto. Is this expected? I have to manually change the file name?
This doesn't seem all that efficient and could be stream lined...
Thanks

This may be preaching to the choir but here goes:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full sizes
I also suggest the Maximize PSD File Compatabilty be set to Always.
In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
Happy Holidays

Toshiba Satellite: upgrade to Advanced Format hard drive?

Hi! I have a Toshiba Satellite. My hard drive is on the fritz, so I want to upgrade the hard drive. I called Toshiba support and asked what kind of hard drives I could use. They said "Any hard drive that isn't Advanced Format".
So I buy a new hard drive (that has no mention of being Advanced Format). It arrives, and (surprise) it says "Advanced Format" on the drive itself.
My question: is it okay to use Advanced Format drives on a Satellite? I know I'll probably have to update the BIOS, but beyond that, is there anything special about a Satellite that would cause it to have problems?
Toshiba Satellite L775D-S7222
Windows 7
New hard drive I want to use: "WD Black". WD5000BPKT (It's a Western Digital brand.)
I intend to "clone" my entire system, windows and all, to the new drive. I know I will have to run a "realignment" tool. I plan to use WD's cloning tool, which can both clone and realign.
http://support.wdc.com/product/downloaddetail.asp?swid=119&wdc_lang=en
edit: For reference, there's an excellent knowledge base article here:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Errors-after-installing-new-quot-advanced-...
I guess my question is "Should I avoid AF completely" and try to return the hard drive?
Solved!
Go to Solution.

Satellite L775D-S7222
"WD Black". WD5000BPKT
Just for the record, the WD5000BEKT does not use advanced-format technology.
WD Scorpio Black
I called Toshiba support and asked what kind of hard drives I could use. They said "Any hard drive that isn't Advanced Format"
Toshiba's tech support is correct in the case when you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. It's likely you will have the sort of problems I have described in this message.
After Restoring to New Hard Disk, No Windows Update - a Fix
I know of no reason you should have difficulty when you follow the instructions from Western Digital for cloning to an AFT drive.
-Jerry

Advanced Formatting and Positioning Question

Similar Messages

Maybe you are looking for