Advanced IDOC Monitoring Tool (AIM)

Dear all,
what is the Transaction of  'Advanced IDOC Monitoring Tool (AIM)' ?
It is mybe the WE02?
regards

Hi
IDOC Monitoring
WE02 IDoc display
WE05 IDoc Lists
WE06 Active IDoc monitoring
WE07 IDoc statistics
System Monitoring
SM12 Locked Entries
SM13 Update Monitoring
SM21 System Log Display
SM58 Transactional RFC Log
SM66 Debug Async Update Tasks
ST22 Dump Analysis
Regards
Gaurav

Similar Messages

  • Idoc monitoring tool .

    Guys , Is there any tool to monitor the Inbound and the outbound IDoc s from one server to another server . ?  I know there are transactions to view the Idoc , reprocess it , But i need to know is there any tool kinda thing which monotors all of the inbound and outbound idocs ?

    Hi,
    I have no idea if there exist such a tool..
    But when i had a similar requirement for IDoc monitoring i couldn't find any such tool so i developed a tool on my own similar to WE05 transaction but with additional functionality which will monitor the idocs and email the list of error idocs and complete idoc lists seperately. This tool was scheduled according to the client requirement daily and its working fine now.
    Regards,
    -Sandeep

  • Monitoring  tools of Idoc interface

    Can anyone provide me the information on   " Monitoring  tools of Idoc interface"

    Please search yourself before posting.
    Thread locked.
    Thomas

  • Please suggest DB monitoring tool

    Our DB have some performance issues, I need your suggestions to buy a DB monitoring tool to help us to resolve these problems.
    If you can share your experiences on the tool, it will be the best.

    Hi,
    We don't have enough knowledge on DB.In that case, beware of tools that make recommendations that you cannot understand . . .
    Some advanced monitoring tools can be cryptic for beginners.
    Is OEM or Statspack suitable to a beginner? Beware, the OEM diagnostic pack and the OEM performance pack are really expensive, over $6,000 per seat:
    http://www.dba-oracle.com/news_tuning_packs_price.htm
    Plus, consider 3rd party tuining tools.
    Historically, Oracle tools have had a bad reputation, and Oracle's Oracle Expert tool was widely criticized for making ridiculous tuning recommendations . .
    Everybody has a monitoring tool to plug, I even have a few that I wrote myself.
    There are a zilllion of them, but they all offer test drives, but try to find:
    - A monitoring tool that makes recommendations in plain English
    - A tool that is reasonably priced
    - A tool from a well-know vendor with a good track record
    Lastly, if you are not familiar with Oracle tuning, it may be better and cheaper to buy an Oracle health check.
    A guru can find tuning problems in just a few hours, faster and more efficient that using a tuning tool.
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/t_oracle_tuning_book.htm
    "Time flies like an arrow; Fruit flies like a banana".

  • IDOC Monitoring urgent

    Hi SAPpers,
    Does anybody knows what is IDOC Monitoring?
    The step by step configuration for IDOC monitoring.
    Was is the purpose of that?
    What is the Tcode for monitoring IDOC?
    Thanks will be rewarded

    Hi,
    Use
    You can easily and effectively monitor inbound and outbound processing of IDocs using special reports and graphic displays. An agent can also be notified automatically using a workflow if an “emergency” occurs (active monitoring).
    Features
    The following tools are available for monitoring:
    ·        IDoc Display
    All the other fields of the control record are available as selection criteria as well as partners and messages
    -   IDoc numbers
    -   Ports
    -   IDoc types
    You can display a tree structure of the IDoc directly using the IDoc number. The IDoc list is displayed again if several IDocs are selected.
    ·        IDoc Statistics
    The IDocs are sorted and represented graphically according to predefined status groups. Lists and individual IDocs can be displayed using mouse clicks.
    ·        IDoc Search
    You can select IDocs according to their business content, that is, according to the data contained in the segments.
    ·        Error and Status Processing
    Error and status codes are defined for the IDoc transfer. These codes can be assigned to a workflow task, which informs the agent automatically in a procedure.
    ·        Monitoring the Inbound Queue
    If you can receive IDocs via qRFC, you can monitor the inbound queue using a special transaction.
    ·        Monitoring the Outbound Queue
    If you can send IDocs via qRFC, you can monitor the outbound queue using a special transaction.
    ·        Active Monitoring
    This function provides you with a report that informs you if the number of critical IDocs exceeds a certain threshold.
    Active Monitoring Locate the document in its SAP Library structure
    Use
    This report automatically informs the agents responsible if too many incorrect IDocs are found.
    Integration
    Active monitoring is not used for processing or reimporting of an incorrect IDoc. Exception handling of every incorrect IDoc is responsible for this.
    Activities
    You plan the report to run regularly with a variant. The variant also informs the report of the status values to be selected: If the critical status contains more IDocs than specified in the critical number of IDocs, a message is sent to a predefined recipient.
    The recipient receives the notification in the form of a work item displayed in their Business Workplace. If they execute the work item, the IDoc statistics are displayed with the values determined at the time of evaluation. The agent can display the current status of these IDocs using the Refresh function. The selection criteria which led to the notification are also used for this evaluation.
    Example
    An important customer orders goods using EDI on working days, between 8am and 6pm. These goods are to be delivered at 4pm the next day. To ensure that the delivery is made on time, the ordered quantity must be recorded by midday on the day of delivery. The active monitoring function is to be used at 8am every morning to determine whether there are any orders which could not be processed automatically. The report, therefore, is started at the same time every day and 0 is selected as the critical number of IDocs. The agent responsible is notified if any incorrect IDocs are found and can then manually process the outstanding orders by midday.
    For more information see
    Schedule Monitoring Job (example)
    A processing status is assigned to an IDoc during processing (e.g. Status03: Data Transfer to Port OK). These status values are in turn assigned to a higher level status group (e.g. Output: IDoc Transfer Successful). This assignment to a status group is referred to as Qualification. You can change the assignment of status values to status groups in the Edit Status Values transaction.
    Procedure
           1.      To edit the status groups, choose the ALE customizing transaction SALE ® Set-Up System Monitoring ® Set-Up IDoc Status Display ® Edit IDoc Status Values (WE47).
    A list of statuses which have been defined is displayed.
           2.      If necessary, choose This graphic is explained in the accompanying text. By double-clicking on the status that you wish to assign a different status group, the detail screen is displayed.
           3.      The status group is displayed in the Qualification field. Use the F4 input help for an explanation of the numbers.
           4.      Select Save.
    ExampleExample
    Status 25 (processing despite syntax error (outbound)) is assigned status group 1 = “Outbound: IDoc generated". Replace 1 with 5 for “Outbound: IDoc Interface error".
    Chek Tcodes in WE02 OR WE05
    Regards,
    Phani,
    Points If Helpful.

  • Idoc monitoring using WE06

    Hi all,
    I want to do Idoc monitoring using the tool Active Idoc Monitoring(Programm: RSEIDOCA;Transaction : WE06).
    So when ever something goes wrong in an Idoc,depending on the idoc type ,I want to inform the concerned person by email using SAP mail( Business Workplace).
    My questions are with regard to the 2 possibilities(I thought) stated below for achieving this.
    [1]
    Is it possible to directly send an email to the SAP mail inbox of the concerned person,using this program depending on the Idoc type and other conditions if they exists .Because depending on the idoc type different users need to be informed of the error.
    I made a variant as said below in the link.
    http://help.sap.com/saphelp_470/helpdata/En/dc/6b81b943d711d1893e0000e8323c4f/frameset.htm
    Is it possible to test this case immediately by sending a error ORDERS Idoc.If yes,How?
    Is the configuration said in the above link sufficient or Is there any need to make any further changes.
    OR
    [2]
    Using transaction WE06,I want to the send the email to my sap mailBox and from there forward it to other users depending on the conditions said above.
    How could I achieve it? Test it immediately
    I would like to go forward with this 2nd solution,if thats better and easily configurable.
    How to configure this scenario.
    Any help is greatly appreciated.
    Regards
    K

    Closing this thread.Moving it to a more appropriate forum.

  • IDoc Monitoring: Data collection not getting completed

    Hi,
    I have setup IDoc monitoring in Solution Manager 7.1 SP08 for managed systems which is on ST-A/PI 01Q. There are many IDoc being generated in the managed system but I am not getting any alert for it.
    In the alert inbox I get the message that the data collection has not yet taken place since the last activation. and the last data collection time is shown as of 2009.
    Also in the managed system the BPMon background job BPM_DATA_COLLECTION_2 get cancelled with run time error TSV_TNEW_BLOCKS_NO_ROLL_MEMMORY
    What can be the issue?
    Regards
    Vishal

    Hi Vishal,
    Please check and implement below notes to fix the first issue:
    1570282 - Advance Corr. BPMon ST-A/PI 01N
    1946940 - ST-A/PI 01Q SP2: Advance Correction BPMon (Infrastructure and
    EBO)
    1869678 - Advanced Corrections for BPmon/Analytics Delivered with 01Q SP1
    (framework)
    Thanks
    Vikram

  • BEST DB MONITORING TOOL

    hai every body ,
    from your experience which is the best DB monitoring Tool ...?
    my purpose is to watch the activities(insertion,deletion,updation on which tables?)  when an application is working...
    or is there any other oracle supplied packages,which satisfies my purpose...?
    please specify to me...
    thanks in advance...
    john

    Hi John,
    which is the best DB monitoring Tool ...?For proactive monitoring, you cannot beat STATSPACK, all free . . . .
    For reactive monitoring, I like Quest Spotlight and Confio Ignite.
    my purpose is to watch the activities(insertion,deletion,updation on which tables?) when an application is working...That not monitoring, that's auditing!
    You can use LogMiner for free . . .
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

  • Java - Weblogic performance monitoring tool

    Hi there,
    I would like to use a performance monitoring tool for the JVM 1.2.2.x running on weblogic5.1,
    I understand this is quite old version of JVM and already EOL. However We are having performance issue needs to be addressed ASAP.
    Please advice, many thanks in advance.
    - Arun Janarthanan

    Free performance monitoring tool? You can try WebLogic Scripting Tool, you
    can download from
    https://codesamples.projects.dev2dev.bea.com/servlets/Scarab?id=S13
    You can write your own JMX code to get some runtime status from WebLogic as
    you want.
    http://e-docs.bea.com/wls/docs81/jmx/index.html
    "John Marmelstein" <[email protected]> wrote in message
    news:[email protected]..
    Hello,
    Might anyone know of a free performace monitoring tool? Just I've used
    the monitoring part of Mercury before, it makes nice graphs of memory use.
    Is there some free equivalent out there?
    Or maybe someone has cooked up some JMX script ?
    thanks!
    JM

  • Recommendation for MDM monitoring tool

    Dear all
    We are using MDM 5.5 Sp06 on HP Unix. What should we use as an monitoring tool?
    CCMS and SMD is not supported for the above combination.
    Please suggest. Thanks in advance.
    Regards
    Ravi

    Thanks Markus for the reply.
    SMD is not supported for MDM 5.5 sp06 on HP UNIX platform. We got this confirmed in one of the SAP OSS message also.
    since MDM 5.5 SP06 P4 we are supporting CCMS heartbeat again. The documentation is almost finished and waits for last rework - will be provided soon
    We are not using P4, but if you can share the documentation or provide the link, it will help a lot.
    Just to re-confirm CCMS heartbeat is supported for SP06 P4 on HP Unix. Can you please confirm this?
    Thanks in Advance-
    Ravi

  • Inbound idoc monitoring

    Dear all
    What tcode use for inbound idoc monitoring when data is transfer from one sap system to other sap system
    Thanks
    Amit

    Hi
    use the Tool (TCODE  <b>WE19</b>) for inbound IDoc monitoring.
    Also check the following Tcodes
    <b>BDM2</b>                 Monitoring: IDocs in Receiving Sys.
    <b>ELDM </b>                Monitoring of IDocs Processed
    IDX5                 IDoc Adapter - Monitoring
    RSEIDOCA             Active IDoc Monitoring with Workflow
    <b>WE06  </b>               Active IDoc monitoring
    Reward points if useful
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • Reg : IDOC Monitoring

    Hi All,
           Could any one please let me know abt the IDOC Monitoring technique?
           What are all the things we need to take care in idoc monitoring?
          Any inputs will be of gr8 use.
    Thanks in advance.
    Regards
    Abhilash.

    Hi Abhilash,
    In Idoc monitoring we monitor the idocs in MMS system. Depending upon the type of data ( Master or Transactional) we need to take action .
    For master data in error status, you need to replicate the data, if it still fails then you will create a ticket and assign it to your next level support.
    Fror Transactional data in error status ( for eg  51 status you will first reprocess the data through RBDMANI2 program) u need to reprocess, if it still fails then create a ticket and assignit to properresolution group which will take care of issue.
    Remember For master data you should always replicate the data first and for transaction reprocess the data.
    we monitor the idocs in red status and yellow status.
    Red status -  02,26, 29, 51
    Yellow status - 30, 64 , 52
    Depending on the status of idoc and type of data ( Master or Transactional) it contains you will take action.
    refer link below for more info
    http://help.sap.com/search/highlightContent.jsp
    Regards
    Vinod

  • Unix Application monitor tool : Help needed

    Hi All,
    I am planning to develop an Application monitor tool for internal use.
    In a Nutshell this tool will monitor set of services (user applications), which or running on HP UNIX box from a windows terminal. Just to know whether they are running OK or not (red green amber!). In other words executing small command on unix and sending the result back to client.
    I am wondering is there any open source tools for this type purpose from which I can take some help.
    Thanks in advance

    A few simple Google searches will probably pull up what you are looking for on HP Unix. For starters
    http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=GGLD,GGLD:2004-08,GGLD:en&q=open+source+monitoring+tools+HP+unix

  • Performance monitoring tool for Essbase

    Currently we are using Zabbix to monitor the resource usage of Essbase database (CPU, memory, disk IO, etc).
    We would like to know is there are any other web based monitoring tools that can monitor down to process level. The existing Windows performance monitor is relatively complex and also lack of web based interface for administrator to monitor the processes easily.
    We are also looking at Quest Spotlight for Windows but not yet fully explored its capability. We would like to know if there are other choices used by other Essbase administrators.
    Thanks in advance.

    Jbooth wrote:
    Please review the following thread where I wrote a bit about monitoring tools - Re: Monitoring System 9.3.1 Availability
    Regards,
    JohnThanks John! I don't realize that Hyperic is a open source freeware for monitoring. I will try this way.

  • "wsnmp Monitor Tool" in BusinessObjects XI R2 ??

    Post Author: itsmeraghu
    CA Forum: Administration
    Hi Forum,
    I work on BO 6.5.1 and use "wsnmp Monitor Tool" to monitor for BO logs and it scans the Business Objects logs and raises SNMP traps based on its configuration file( wsnmp.ini) and sends to NetIQ.
    What my question is:  Does BusinessObjects XI R2 has "wsnmp" tool (or) any new tool which monitors BO logs and raises SNMP traps ??
    Thanks in advance...Raghu

    I dont believe there will be, but I have not seen anything official on the matter so who knows.
    If it happens it will be in a Service Pack so the only thing I can say it to keep an eye out for the next one and see if it is listed in the supported platforms doc for it.

Maybe you are looking for