Advanced mode and automated client config..

Hi,
Is it possible to configure automated client config when server is in advanced mode?
I have looked through the OD manual etc., but can only find info about automated client config for workgroup and standard install..
Am I just looking the wrong places?
Regards,
Kenneth

Hi
You are looking in the right places. No its not possible, leastways not in the sense I think you mean? You can achieve a deep level of client config using Advanced but only in the sense of controlling aspects of what clients can or can't do as well as access to Server Resources amongst other things.
You may have got a 'flavour' of what is achievable if you've been reading the Open Directory Admin Manual? You might also want to have a look at this:
http://images.apple.com/server/macosx/docs/UserManagementv10.5.mnl.pdf
Tony

Similar Messages

Bridge Mode and Wireless Clients

I have my network up and running fine, but I am now thinking I may need to tweak it a bit. I have an AEBS(n) and an Airport Express both set up with WDS. The Extreme is the base station and the Express is set in WDS Remote and in Bridge mode under the internet tab. The Express is hooked up via a wired ethernet connection to my PS3. Everything works.
I am wondering if in bridge mode, the express accepts wireless clients as well as providing net access to my PS3 over the ethernet cable. Both the extreme and express stations are close enough together that I am not sure which one I am connecting to when I use my laptop wifi.
Thanks in advance for your help.

I am wondering if in bridge mode, the express accepts wireless clients as well as providing net access to my PS3 over the ethernet cable.
Yes if you enable that option.

Lion low-power mode and iTunes client

Potentially dumb question, but it may make a difference in when and/or how I update my home network for media...
I understand that OS X Lion includes a "low-power" mode, in that it's a partial wake-on-LAN that doesn't wake up the display, etc. I also know that an Apple TV can't stream media (movies, specifically) from an NAS type system without going through an iTunes client at some point (even if the NAS has an iTunes server built in).
So, my question is -- does Lion's wake-on-LAN work in this sort of situation? That is, if the computer is in sleep mode, but iTunes is running, will attempting the stream a movie from the NAS to an Apple TV "wake" the Mac to perform its duties, and if so, does it do so in the low-power mode that doesn't turn on the display?

Potentially dumb question, but it may make a difference in when and/or how I update my home network for media...
I understand that OS X Lion includes a "low-power" mode, in that it's a partial wake-on-LAN that doesn't wake up the display, etc. I also know that an Apple TV can't stream media (movies, specifically) from an NAS type system without going through an iTunes client at some point (even if the NAS has an iTunes server built in).
So, my question is -- does Lion's wake-on-LAN work in this sort of situation? That is, if the computer is in sleep mode, but iTunes is running, will attempting the stream a movie from the NAS to an Apple TV "wake" the Mac to perform its duties, and if so, does it do so in the low-power mode that doesn't turn on the display?

Sleep mode and im clients

What I want to do is o be able to close my computer and leave an IM clients running so people can leave me messages. Is there anyway I can do this on my Mac Book Pro. Like a way to disable sleep or maybe a different program other than ichat

There are freeware/shareware apps that can disable the lid-closed sleep functionality of your MBP, such as InsomniaX or Sleepless.
Note that running for long periods with the lid closed can lead to heat problems.
Hope this helps...

Uninstalled Firefox using Revo Uninstaller (advanced mode) in Vista, and now Firefox will not run, period. No task in task manager. What dependencies did I screw up?

I wanted to reinstall Firefox to get rid of all the old Java libraries still installed. I uninstalled using Revo Uninstaller in Advanced mode, and I didn't bother checking what it did this time. I know firefox needs something to exist before it will start, otherwise I wouldn't be having this problem.
== This happened ==
Every time Firefox opened
== I uninstalled Firefox with Revo Uninstaller in Advanced Mode ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.38 Safari/533.4

Yes, it needs the user profile, I think. Granted you probably lost all your bookmarks and passwords and history and so on...
Go to your [http://support.mozilla.com/en-US/kb/Profiles profile folder] and delete it (or back it up, maybe there's stuff you can scavange from there).
Try to reinstall Firefox now. It should create a new profile.
And the Java stuff will still be there. It is uninstalled separately at your operating system's control panel, I believe. You can disable the plugins you don't want, too. Just go into Tools > Add-ons > Plugins.
And for future reference, if you uninstall Firefox and check the box that says to delete your private data too, it will clean every single trace of Firefox from your computer. This isn't some fishy software you download from a fishy site. Firefox is clean and safe to use :)

Measurement and Automation explorer or the Instrument I/O Assistant is not installed correctly.

I am having difficulties getting Labview to work with my NI card. I have a PCI_6225 card running on a Win 7 64-bit install. I had to download all of the drivers and installers from the NI site and during the Labview install, I recieve a prompt asking for my hardware drivers. Since I only have the compressed hardware installer, Labview doesn't like what it sees and continues the installation of LABVIEW. I then attempt to open an analog input channel through the Instrument I/O Assistant which displays the error seen in the image attached.
I know the hardware works because in the Measurement and Automation client, I am able to observe the analog input I hope to collect in LABVIEW.
Is there a fix to get LABVIEW working? I have tried multple installs of LABVIEW and am on a administered computer through my University's IT people. I have 'full admin' rights. Thanks.
Attachments:
error.jpg ‏254 KB

Hello jbaxter,
When you download the Drivers from NI's website, make sure you unzip them (extract them) to a folder on your computer before you install them. If you use the NI Downloader it should prompt you to unzip and run the files after the download is complete. You need to either repair, or reinstall DAQmx and NI VISA. Make sure you download the latest versions of these first:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/global/lang/en/pg/1/sn/catnav:du,ssnav:sup/1//en/...
Then go to Control Panel»Programs and Features»National Instruments Software and click Uninstall/Change then go to DAQmx and NI-VISA and click Repair. You can then point to folder that you downloaded from NI's website (make sure this is not a zip folder, but the folder that has been extracted). Or you could choose Remove, and then reinstall them both again. Also if you are using GPIB, reinstall or repair the NI-488.2 driver.
Here are some relevant links:
http://digital.ni.com/public.nsf/allkb/DC808866AF7D5C0986256FCE006E9BAB
http://forums.ni.com/t5/LabVIEW/Again-I-O-Assistant-not-installed-correctly/td-p/1024807
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/quot-MAX-or-Instrument-I-O-Assistant-not-inst...
http://forums.ni.com/t5/LabVIEW/Install-Instrument-I-O-Assistant/td-p/1471516
Software Developer
National Instruments

Simply setup client features with server installed in advanced mode...

Hi,
If I setup my server in standard "mode" I see that Leopard clients discover my server automatically and the server try to set all clients fatures (Mail accounts, Ical server, etc.).
There is a way to activate this useful fature ALSO with a server installed in "advanced" mode?
My server need to be installed in advanced mode because it's an open directory master with a DNS that serve all my lan.
Thanks in advance...

Hi Kranthi_06,
According to your description, you have an environment with reporting services installed, the info given by the client they are using reportingservices with sharepoint integrated mode. In SSMS, you can see two databases with names reportserver$DEN2010 and
reportserver$DEN2010tempdb.
In Native Mode, in the SQL Server Installation Wizard, if we select Install and configure option, the ReportServer database will be created automatically through Setup. If we choose the Install only option, we must use the Reporting Services Configuration
Manager to create the database manually. By default, the database format is ReportServer and ReportServerTempDB. In SharePoint Mode, we need to create at least one Reporting Services service application by using SharePoint Central Administration or Reporting
Services PowerShell cmdlets, then three databases are created for each Reporting Services service application and the database names by default include a guid that represents the service application. The following are example names of the three SharePoint
mode databases:
ReportingService_90a9f37075544f22953c4a62e4a9f370
ReportingService_90a9f37075544f22953c4a62e4a9f370TempDB
ReportingService_90a9f37075544f22953c4a62e4a9f370_Alerting
For SSRS 2008 R2 or early versions, we can identify report server mode using the Reporting Services Configuration Manager. For SSRS 2012 or later versions, Reporting Services Configuration Manager no longer supports Reporting Services SharePoint mode. Configuration
of SharePoint mode is completed using SharePoint Central Administration.
Reference:
Verifying SharePoint integrated mode installation
Create a Report Server Database
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Advanced Mode in 4.8 Client?

We have client 4.8 version installed and many of the installations do not allow you to select advanced mode - it is grayed out. How do we go about getting the client to show the advanced mode capabilities?

I think you'll need to Edit the global profile "vpnclient.ini" located on "C:\Program Files\Cisco Systems\VPN Client". Open the file "vpnclient.ini", go to value "AdvancedView" and change it to "1".

Difference between config in administration mode and expert mode

Hi,
We can make changes to FPM-based component configuration via administration mode (SE80, menu bar Web Dynpro Configuration > test > Execute in Administration Mode) or expert mode (user parameter FPM_CONFIG_EXPERT = X), to, for example, add a new tab (main view) to a sap standard application (after enhancing the sap std component config).
I understand that in expert mode any changes are regarded by the system as modifications (as opposed to customisation with administration mode) and hence these modifications could be overwritten by future support pack application. Correct?
Is there any advantage to using expert mode over administration mode, given that expert mode config could be overwritten?
Thanks in advance,
JP.

Hey Baskaran,
Thanks for your reply and further info, I appreciate the dialog between us on this, it helps me and I hope it helps others, as I know from personal experience today that some SAP developers themselves are not clear on the diffrerence.
With regard to your comment "In both ways the modifications are not lost or overwritten" I quote from the fuller explanation on "Fitting Webdynpro..." I posted earlier in this thread, with the excerpt "Changes made in expert mode are modifications that are overwritten when a new release or enhancement package is imported. Expert mode allows configuration for an application to be launched from that application." of particular interest:
"The concrete layout of a Web Dynpro application is determined by the application configuration and the configurations of the embedded Web Dynpro components. These configurations can be adjusted or changed at any time. Floorplan Manager uses the concepts for changing Web Dynpro applications that have been prepared by Web Dynpro ABAP:
Changes to the Web Dynpro built-in and component-defined configurations are stored in administrator mode as delta information in the Customizing layer of Web Dynpro ABAP. Changes in administrator mode are modification-free changes. This is because when a new release or enhancement package is imported, only the Web Dynpro development layer is affected.
In expert mode, changes to the component-defined configurations are stored directly in the Web Dynpro ABAP development layer. Changes made in expert mode are modifications that are overwritten when a new release or enhancement package is imported. Expert mode allows configuration for an application to be launched from that application.
The configuration editor for Floorplan Manager is available to you for making changes. This editor can be launched in the Web Dynpro Explorer or from the runtime of the application. For more information, see Calling Up a the Configuration Editor."

Can we have more than 2 "and/or" conditions in filters in advanced mode in power view?

Hi,
I need to check 3 conditions in filter in advanced mode in power view. Is it possible out-of-box. Can we customize the advanced mode filters or do we have some configurable options for same.
Thanks,
Bhawna.

Hi Bhawna,
I'm the Dev Owner for the filtering experience in Power View. Sorry it took so long for me to reply.
In the Power View Advanced Filter cards, you cannot currently add more than two conditions. What Rhys meant about having as many AND filter conditions as you like is that because all of the filter cards are AND-ed together, you can effectively have
more than two filter conditions by adding multiple 'LastModifiedDate' cards.
Unfortunately this won't help you if you're looking to OR more than two conditions.
Adding the ability to have more than two conditions in a single Advanced Filter card is something that is near and dear to my heart, but it does open questions of nesting and grouping which would need to be addressed first in order to be able to offer a
complete solution.
Hope this helps,
Jeremy

After updating to 4.0 stable today, FF reports it is in offline mode and can't open pages! I've checked the work offline boolean in about:config, it is set to false as it should be. !?!?

After updating to 4.0 stable today, FF reports it is in offline mode and can't open pages! I've checked the work offline boolean in about:config, it is set to false as it should be. !?!?

What in particular didn't you like about Firefox 6?
You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
*https://support.mozilla.com/kb/common-questions-after-updating-firefox
Do a clean reinstall of the version that you want to use.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Time Capsule / Airport Extreme client mode and alternatives

I have three PCs on a boat.
I want to create a wired Ethernet with shared internet access via wifi from a remote, land-based access point. I have no control over the broadband router at the other end (so putting an apple device at the other end is not an option).
I read here:
http://bc.whirlpool.net.au/bc/hardware/?action=hview&modelid=264
... that the Time Capsule supports "client mode", so I bought a TC today with fingers crossed.
As soon as I configure the TC for client mode, it disappears off the wired Ethernet. In the instructions for the TC, there is a diagram showing the TC operating in what looks like client mode, but without any Ethernet devices attached. My interpretation is that if it does support client mode, it only does so as a wireless network drive and USB hub (ie no wired Ethernet). Correct?
So, I think my options are:
1. Plug a wireless gaming adaptor into the WAN port on the TC and use that to connect the TC to the remote broadband connection.
or
2. Take the TC back to the shop and get a gigabit router with aftermarket dd-wrt firmware to enable it to run in client mode, and then buy a gigabit NAS.
Am I talking sense?
Hopefully,
R

Thanks for your reply...
I am thinking of keeping the Airport Extreme as I have my PS3 and my Xbox 360 Elite connected to it by Ethernet and my Wii connected by Wi-Fi.
So the Wireless clients are the iMac, iPhones / iPod Touch, Nintendo Wii and my Canon Wi-Fi printer... all of which necessitate the 802.11n (b&g compatible) setting on the AEBS
I think that means that the Time capsule, Apple TV, Macbook and Airport Express will run on a throttled back 802.11n when ever there is no activity from the other devices... I am not entirely sure how the b&g compatible setting works.
One of my favourite things about my setup is being able to use the iPhone Remote App to control my Macbook, Apple TV and Airport Express. Sadly, I have to have iTunes running on my computer as Apple Tv won't transmit its content to Airport Express which would be the ideal.
Time Capsule has now been setup but I want to connect the HDD by USB and then use it as a Network drive, hopefully at 802.11n speeds. I will look into partitioning the Time Capsule but it has almost 300GB of Movies and I don't want to have to start again with all of that...

Rename client computer via ARD and Automator

Does anyone know of a method or action to rename (Computer name) Macs using AppleRemoteDesktop and Automator?
I have over 700 laptops on a school network that I would like to rename based on a tab deliminated text file containing the all the mac (ethernet) addresses and the assocated user.
I have tried sending a unix script and the text file via ARD to change the computer name via scutil, but it doesn't work consistently.

You should be able to use AppleRemoteDesktop to rename the remote computer. Once you are connected to the remote computer, just go to "System Preferences...", and click on "Network" and change the computer name.
If you are a non-administrator of ARD, you may need to turn on the access privilege to rename the remote computer. Go to "Preferences..." in ARD, and click on "Security" button, and turn the access privileges on.

TS3694 Ipad is stuck in recovery mode and can not advance after attempted IOS 7 update

After attempting to upload IOS 7 for ipad the Ipad locked up in recovery mode and I get the 3194 error message

I'm getting the same message, and I have had to restore my iPad and lost all my settings!

The dreaded 404 message using basicHttpBinding, Transport security mode, and certificates

I am working on setting up a WCF service using mutual authentication with both client and server certifiates. The service is hosted in IIS 7, and I'm trying to access it from a simple console app. When I try to connect to the service, I get the error ""There
was no endpoint listening at
https://localhost/IISHostedService/MyService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details." The inner exception is "The remote server returned an error:
(404) Not Found."
I have seen people all over the net reporting this error, but so far none of their fixes work for me. I have an HTTPS binding in IIS for my app, and I am able to browse to my service (using either http or https) and view it with no problems. I can get the
wsdl (also over either protocol) with no issues, but connecting from the client doesn't work.
Here is my server config:
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceCredentials>
<serviceCertificate findValue="ServerCertificate" storeLocation="LocalMachine" x509FindType="FindBySubjectName" />
<clientCertificate>
<authentication revocationMode="NoCheck" />
</clientCertificate>
</serviceCredentials>
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_MyService">
<security mode="Transport">
<transport clientCredentialType="Certificate" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<services>
<service name="MyService">
<endpoint binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_MyService" contract="Namespace.IContract" />
</service>
</services>
</system.serviceModel>
And my client:
<system.serviceModel>
<behaviors>
<endpointBehaviors>
<behavior name="clientEndpointBehavior">
<clientCredentials>
<clientCertificate findValue="ClientCertificate" storeLocation="LocalMachine" x509FindType="FindBySubjectName"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
</behaviors>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_MyService" closeTimeout="00:10:00"
openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"
allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536"
messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered"
useDefaultWebProxy="true">
<readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<security mode="Transport">
<transport clientCredentialType="Certificate" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="https://localhost/IISHostedService/MyService.svc behaviorConfiguration="clientEndpointBehavior"
binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_MyService"
contract="Namespace.IContract" name="BasicHttpBinding_MyService" />
</client>
</system.serviceModel>
I am not sure if it matters, but this client and server are running on the same physical machine in a test environment. I have confirmed that both the client and the server certificates are installed, and that the issuing authority is trusted. The virtual
folder is set in IIS to "Accept" client certificates, and SSL is not required.
Does anyone have any thoughts what I may be missing? This service works without a problem over HTTP, so it has to be somehow related to the certificate that is being passed. With the Server certificate, I just trapped the ServicePointManager.ServerCertificateValidationCallback
event to manually approve the certificate if the subject matched what I was looking for (the subject does not match the domain name, since this is a test environment). Do I need to do something similar for the client certificate?
EDIT: One thing I do notice is that, in the WSDL, the soap location is always pointing to http. I'm not sure if that is correct or not:
<wsdl:service name="MyService">
<wsdl:port name="BasicHttpBinding_MyService" binding="tns:BasicHttpBinding_MyService">
<soap:address location="http://computerName.domain.com/IISHostedService/MyService.svc" />
</wsdl:port>
</wsdl:service>

A little more information (since this is the main thing I have to work on today):
After some research, I decided to try using a custom certificate validator, in case something is wrong with the client certificate. In the clientCertificate\authentication node on the server, I set the certificateValidationMode="Custom" and set customValidationType="MyType.Validator,
MyType". My type is apparently being found (when it is not found I get a "service could not be activated" error), but my Validate() method is never being called.
Now this leads me to believe that it's not a problem with the client certificate, but something else, before it even gets that far.

Advanced mode and automated client config..

Similar Messages

Maybe you are looking for