Advanced mode in receiver FILE adapter

Hi there,
Does anyone of you have a list of aditional parameters to be specified in the receiver FTP communication channel?
The only one i found is ftp.timeout and this is available on my default FTP connetion parameters.
Thanks a lot in advance,
David

Hi David,
Additional parameters are published in SAP Note 801926
Also Check this one.
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
**Reward points if usefull***

Similar Messages

Receiver File adapter Append Mode

Hi
I have scenario where i am sending multiple idocs to file ...when i putting the file construction mode to append i can put multiple idoc in to file but i wanna do it on daily basis Means i wanna send the newly crated or changed Idoc on a daily basis to a single file ..
How can i achieve that
SV

Hi
You can achieve this using dynamic file names.
Every day different files
FileName-<DD>-<MMM>
chk these
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
rgds
Arun

Email attachment name in sender mail adapter to the receiver file adapter

HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
Vamsi

Hi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel

Receiver file adapter settings

Hi,
I have a scenario in which I need to generate a file in tab delimited format. But in the receiver file adapter configuration we have only text/binary file creation mode. By setting the File Type in TEXT mode will I be able to do a tab de-limited file?? Or is there any other configuration settings need to be done?
-Ken

Hi Amanda,
Thank you so much for the great info. I think I can find some stuff but still it would be helpful if you could forward the doc to [email protected] Also, yeah it looks like the receiving file format would be complex with header and footer. In the content conversion can we specify header and footer?? or is there any other way to define...FYI my source file also contains header and footer..I am just a little confused on how to set up the message types for mapping...
Many thanks..
-ken

Need to get the Mail attachment name as it is to the receiver file adapter

I am doing a Mail to File scenario. I need to get the attachment from the mail and store it on the file server. I am using the PayloadSwap bean in the sender mail adapter. My requirement is to carry forward the attachement name as it is to the receiver file adapter side and store the file with the same name.
Did any one try doing this? I was looking at developing an adapter module but got struck as I could not find whether the attachement name is stored in the XI payload after it has got swapped using the swap bean.
Any help would be appreciated.
VJ

Oops pressed the send key. Take two.
This is becoming a damn nightmare. When I run the adapter I am getting ModuleExceptions. Can you pass your eyes over these Java config settings to see what I am doing wrong. Using NWDS CE 7.1 with PI 7.1 both at SP07. All the imports were taken from PI 7.1 after SP07 was applied. The build id of NWDS is
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0001
Build id: 200901152336
APPLICATION.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
"http://java.sun.com/dtd/application_1_3.dtd">
<application>
<display-name>MailPOP_EAR</display-name>
<description>EAR description</description>
<module>
<ejb>MailPOP_EJB.jar</ejb>
</module>
</application>
APPLICATION-J2EE-ENGINE.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">engine.security.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">engine.j2ee14.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">com.sap.aii.af.svc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="interface">com.sap.aii.af.ifc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.lib.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.base.technology.facade</reference-target>
</reference>
<fail-over-enable mode="disable" />
</application-j2ee-engine>
EJB-J2EE-ENGINE.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-j2ee-engine SYSTEM "ejb-j2ee-engine.dtd">
<ejb-j2ee-engine>
<enterprise-beans>
<enterprise-bean>
<ejb-name>GetMailAttachment</ejb-name>
<jndi-name>GetMailAttachment</jndi-name>
<session-props/>
</enterprise-bean>
</enterprise-beans>
</ejb-j2ee-engine>
EJB-JAR.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<description>EJB JAR description</description>
<display-name>EJB JAR</display-name>
<enterprise-beans>
<session>
<ejb-name>GetMailAttachment</ejb-name>
<home>com.sap.aii.af.lib.mp.module.ModuleHome</home>
<remote>com.sap.aii.af.lib.mp.module.ModuleRemote</remote>
<local-home>com.sap.aii.af.lib.mp.module.ModuleLocalHome</local-home>
<local>com.sap.aii.af.lib.mp.module.ModuleLocal</local>
<ejb-class>sample.GetMailAttachment</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
SENDER MAIL ADAPTER modules
1 AF_Modules/PayloadSwapBean Local EB 1
2 GetMailAttachment Local EB 2
3 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local EB 3
1     swap.keyName          payload-name
1     swap.keyValue          MailAttachment-1
RECEIVER FILE MODULES
1     localejbs/AF_Modules/DynamicConfigurationBean     Local Enterprise Bean     1
2     localejbs/CallSapAdapter                    Local Enterprise Bean     2
1     key.0          write http://sap.com/xi/XI/System/File FileName
1     value.0          message.interface
VARIABLE FILENAME SUBST WITH ASMA TURNED ON
fName     message:interface_name
JAVA SOURCE
package sample;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.lib.mp.module.Module;
import com.sap.aii.af.lib.mp.module.ModuleContext;
import com.sap.aii.af.lib.mp.module.ModuleData;
import com.sap.aii.af.lib.mp.module.ModuleException;
import com.sap.engine.interfaces.messaging.api.Message;
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
import com.sap.engine.interfaces.messaging.api.TextPayload;
import com.sap.engine.interfaces.messaging.api.XMLPayload;
import com.sap.aii.af.service.cpa.Channel;
@ejbHome <{com.sap.aii.af.lib.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.lib.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.lib.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.lib.mp.module.ModuleRemote}>
@stateless
<code>GetMailAttachment</code>
@SuppressWarnings("unused")
public class GetMailAttachment implements SessionBean, Module {
     private static final long serialVersionUID = 7612238514043673502L;
     private SessionContext myContext;
     private MessagePropertyKey myFileName;
     public void ejbRemove() {
     public void ejbActivate() {
     public void ejbPassivate() {
     public void setSessionContext(SessionContext context) {
          myContext = context;
@throws CreateException
     public void ejbCreate() throws CreateException {
     public void getMessageProperty(MessagePropertyKey FileName) {
          myFileName = FileName;
@param moduleContext
           Contains data of the module processor that might be important
           for the module implementation such as current channel ID
@param inputModuleData
           Contains the input XI message as principal data plus eventual
           set supplemental data
@return ModuleData Contains the (changed) output XI message. Might be the
        response message if the module is the last in the chain.
@exception ModuleException
               Describes the cause of the exception and indicates whether
               an retry is sensible or not.
     @SuppressWarnings("deprecation")
     public ModuleData process(ModuleContext moduleContext,
               ModuleData inputModuleData) throws ModuleException {
          try {
               Message msg = (Message) inputModuleData.getPrincipalData();
               TextPayload payload = msg.getDocument();
               String contentType = payload.getContentType();
               // Content Type could be something like
               // text/plain;charset="UTF-8";name="file.txt"
               contentType = contentType.replaceAll("\"", "");
               int i = contentType.lastIndexOf("=") + 1;
               String fileName = contentType.substring(i);
               msg.setMessageProperty(myFileName, fileName);
               inputModuleData.setPrincipalData(msg);
          } catch (Exception e) {
          return inputModuleData;
JAVA ERRORS
2009-02-04 11:41:14     Information     Mail: calling the module processor for channel LMK_Common_Mail_Sender
2009-02-04 11:41:14     Information     Swap: swapping by payload-name ? MailAttachment-1
2009-02-04 11:41:14     Information     Swap: successfully swapped
2009-02-04 11:41:14     Information     Mail: message leaving the adapter (call)
2009-02-04 11:41:14     Information     The application tries to send an XI message asynchronously using connection AFW.
2009-02-04 11:41:14     Information     Backward validation is enabled
2009-02-04 11:41:14     Error     Unable to validate the message with message ID 8702df71-f254-11dd-9b9b-001a64a73518
2009-02-04 11:41:14     Error     Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14     Error     Mail: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14     Error     Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
     message1
          SD01_E
               FileName
               row
     message2
          SD02_E
               FileName
               row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Receiver File Adapter - Adapter Engine

I am able to read files using Sender File Adapter. But when I try to write a file using Receiver File Adapter I get the following erro:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="<http://sap.com/xi/XI/Message/30>" xmlns:SOAP="
<http://schemas.xmlsoap.org/soap/envelope/>" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.exi.usxid</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: No service user name found for Integration
Server is.00.usxid</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password)
for the Adapter Engine af.exi.uswalexi</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I tried executing the function module SAI_AE_DETAILS_GET but I am not getting the error URL Not found. This was working in the past. We upgraded to SP15 this showed up again.
Any help appreciated.

I'm working on integration of SAP with 3rd party application. While sending data from SAP to XI, i'm getting the following error which i've found in sxmb_moni (XML Message->Call Adapter).
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- -
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xp1.sapxi</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: No service user name found for Integration Server is.00.sapxi</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xp1.sapxi</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Plz help me to solve this issue. If possible mail me the solution to my personal email-id [email protected]
Note:
1. We are using CIM 1.3
2. In XI Server Message Monitoring, i'm getting the System Error message in Integration Engine.
3. In Payloads, i'm getting the required information in XML format as desired.
Thanks in advance.
Regards,
Navaneeth.S

Receiver file adapter posts multiples for singel source files

Hi,
I am using wild character in my input source ftp adapter but my receiver file adapter is creating multiple duplicate files. I am not sure why this happens as QOS is set to "Exactly Once" with archive processing mode. I tried with delete mode and the same error occurs. We had no problems testing it in our Dev environment but in QA its acting so strangely...Any advise is appreciated..
-Teresa

Hi,
2. Homany files you posted at oubound directory?
1. You said duplicate files at receiver side, is the files having time stamp? if so those are not duplicate files.
Thanks,
Satish.

Receiver File Adapter - FTPEx: 550 Access denied

Hi Experts,
In my receiver file adapter scenario I'm getting 550 Access denied in RWB.
I am a little confused here because I could access the FTP client from my desktop using the same User and Password informed in the Receiver CC. I also could drag and drop a file there.
Here you have Detail Display in RWB, it seems that at least the user is working fine for PI also:
Success: Connecting to FTP server "<FTP IP>"
Success: Write to FTP server "192.168.10.85", directory "\Transportadoras\10326750000101\", file "Nfe_teste.xml"
Success: Transfer: "TXT" mode, size 8881 bytes, character encoding UTF-8
Error: Attempt to process file failed with An error occurred while connecting to the FTP server '192.168.10.85:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor.
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: An error occurred while connecting to the FTP server '192.168.10.85:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor.
Regards,
Daniela
Edited by: Daniela Machado on Aug 11, 2010 10:18 PM

Hi Daneial,
This is an issue due to any firewall or proxy between your Xi system and the FTP.In this case the direct logon
works with same user but when XI tries to create file at runtime you get this error due to network issues.
To resolve this contact your Basis/Network guys and
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards,
$rinivas

Dynamic File Name for Receiver File Adapter

Hi All,
How can we use dynamic name for Receiver file adapter?
Can anyone help.
Thanks in Advance
Chemmanz

Hi Chemmanz,
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

Target Directory & File Name parameters in Receiver File Adapter with ASMA

Hi Experts..
I have the following question....
What am I suppose to inform in the Target Directory & File Name obligatory parameters in Receiver File Adapter if I am using ASMA to fill it? Is it any dummy value?
Also, if you have any step by step guide/blog to forward on how to use ASMA in file adapter I will be greatful.
Thanks in advance,
Daniela

You can give any dummy value in dir and file name... Just go through these blogs
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot

Receiver File Adapter - File Content Converstion

Hi,
I have an xml-output (as a string) but I need to use the content converstion tool in the receiver file adapter to make this into one string without the nodes etc. Example of the format that i want the file to be in:
1AXXX10363501       00000013PC..........etc.
And I need each instance of SBR in a new row. How can I do this? Please tell me if things are unclear.
Example of the structure the file has now without content converstion.
<?xml version="1.0" encoding="UTF-8"?>
<StockBalanceFlatfile><Rows><SBR>
<Type>1</Type>
<Mode>A</Mode>
<Owner>XXX</Owner>
<SKU>10363501</SKU>
<Quantity>00000013</Quantity>
<UOM>PC</UOM>
<Attr1>2476</Attr1>
<Status>0000</Status>
<Filller>----
</Filller>
<ELM>*</ELM>
<CRLF>CRLF</CRLF>
</SBR></Rows></StockBalanceFlatfile>
Best Regards
Claes

Claes,
Use the below content conversion parameters.
<u>Content Coversion Parameters</u>
<b>Recordsetstructure</b>    StockBalanceFlatfile,Rows,SBR
<b>Name</b>     <b>Value</b>
SBR.endSeparator           'nl'
If it doesn't help, reply back.
Best Regards,
raj.

Receiver file adapter with attachments.

Hi
I would like to pass a file receiver an attachment from a proxy. I have seen bits and pieces with attachments. I have read that its similar to the mail adapter.
In the module
localejbs/AF_Modules/PayloadSwapBean
module configuration:
Parameter Name: swap.keyName
Parameter Value: payload-name
Has anyone succeeded and would you explain the details?
Thanks in advance
Ian

Hi,
As far as I know, receiver file adapters do not supprt attachments.
You can use the payloadSwapBean to swap the attachment and the actual proxy payload and then send it to the file adapter.
Don't think it will be possible to send both the attachment and the payload to the receiver file adapter though.
Regards
Bhavesh

Receiver file adapter creates an innecesarry extra line

Hi,
I have an issue with an extra line that add the receiver file adapter with the content conversion.
The file XML that the file adapter has to convert, is the next;
<root>
<cofig>
<FileName>NameOfTheFile.txt</FileName>
</cofig>
<lines>
<line>
<data>BBBBBBBBBBBBBBBBBBBBBB</data>
<data>Aaaaaaaaaaaaaaaaaaaaaa</data>
</lines>
</root>
Because FileName is not necessary, I remove it with:
cofig.fieldFixedLengths 0
cofig.fixedLengthTooShortHandling CUT
but it leaves an empty line that i don't want. that is, the text in the file start in the second line.
Any help?
Thank you in advance.

Can you do a small change in your mesg. structure ?
change it to....
<root>
<lines>
<line>
<data>BBBBBBBBBBBBBBBBBBBBBB</data>
<data>Aaaaaaaaaaaaaaaaaaaaaa</data>
</lines>
<i><b><cofig>
<FileName>NameOfTheFile.txt</FileName>
</cofig></b></i>
</root>
and then use
cofig.fieldFixedLengths 0
cofig.fixedLengthTooShortHandling CUT
followed by
endSeparator 0
Ref: Suppressing Field In Receiver File Adapter for more details.

Multiple Header line in Receiver File adapter

Hi,
I have an issue in Receiver File adapter with multiple header lines. I am able to get only 1 header lines in the receiver file but not multiple header lines with 'nl' since it is static in file mode
[CommunityTag:Header]
empNo,EmpName,Age
[CommunityTag]
I tried with the below in content conversion one as below with no luck
Root.addHeaderLine=1
Root.headerLine=[CommunityTag:Header] 'nl' empNo,EmpName,Age 'nl' [CommunityTag]
Root.fiedSeparator=,
Root.endSeparator='nl'
I am getting the Header line as same row as static text.
Can you advise this.

Hi Gabriel, I suggest to produce the header lines from additional nodes in the message payload. That means you need to modify the data type of the target message in order to generate an extra structure in the payload. Use constants in message mapping to generate the header column names, e.g.
<Header>
<H1>CommunityTag:Header</H1>
<H2>empNo,EmpName,Age</H2>
<H3>CommunityTag</H3>
</Header>
In content conversion you have to convert the Header row with
Header.endSeparator='nl'
You won't need parameter addHeaderLine anymore then.
Regards, Martin

Advanced mode in receiver FILE adapter

Similar Messages

Maybe you are looking for