Advanced Mode

Hi Guys,
Simple question really. Is there a way of switching back to advanced mode after selecting simple mode on install?
I can't seem to find the option for determining output size, or do you determine that under export options?
Thanks,
Tony G.

I'm assuming these are two independent questions. Advanced install typically allows you choose what gets installed and where it gets put. Most of this you can change after installation without having to go through the application itself.
Secondly my only experience with changing file size and output resolution is under the options for exporting to QT.

Similar Messages

  • Edit button not working in advanced mode

    When I choose a page layout that is pre- made in the options, I can then switch to the advanced mode, but can't get my edit button to work so I can edit the frames or pictures.  Any ideas why?

    Hi sewloco,
    I order to edit the picture/image when in Create mode, you can directly use the toolbar present on the left side in PSE10. You don't need to switch to Edit mode.
    You can also add a new frame/background/graphic from the Artwork Panel. You have a complete set of Effects and layouts available as well. If you want to add text, use the Text tool (press 'T').

  • How to control attributes in 'Add Fields' in af:query Advance mode

    Hi,
    The VO attributes those set Queriable=false doesn't appear in the Add Fields dropdown in ad:query advance mode.
    But I have few attributes in a VO those required to use in VO query so I cannot set those attrbutes Queriable as false.
    Also observed that QBE doesn't work for the attributes whose Queriable set as false.
    So can someone please suggest me how to achieve below,
    VO attribute which having Queriable=true but doesn't appear in 'Add Fields' dropdown in af:query advance mode.
    JDeveloper version 11.1.1.7.0
    Edited by: user12820425 on Mar 21, 2013 10:16 AM

    Hi Naresh
    Thanks for your reply.
    In ViewCriteria -> UI Hints we can set attribute Rendered Mode as never, but that perticular attribute still appear in 'Add Fields' section.
    I think renderedMode=never means that attribute doesn't appear in Advance or Basic mode user need to manually select that attribute.
    So please suggest me how to achive my requirement.

  • Date/Time Format Stored Procedure Calls in ADVANCE MODE in JDBC ADAPTER

    Hi Experts,
    What is significance of Date/Time Format Stored Procedure Calls in ADVANCE MODE in JDBC ADAPTER.
    Thanks,
    ABDUR

    I guess this would be applicable for the folowing formats - DATE, TIME, TIMESTAMP.
    This is the correct link
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
    Regards,
    Prateek

  • File Adapter Advanced Mode - Msecs to Wait Before Modifications Check

    Hi, Can anybody tell me how to set this parameter "Msecs to Wait Before Modifications Check" in PI 7.1? I don't see this parameter at all. In advance mode of PI 7.1, we just have Maximum File Size(bytes). Also when I checked the SAP note 801926 for Advanced Mode we can just set only
    1. Parameter name: "clusterSyncMode"
    2. Parameter name: "ftp.timeout"
    Please let me know if anybody has configured this already in PI 7.1.

    Hi Ravi
    I think this feature is no longer supported in PI 7.1. Although it work with PI 7.0 for NFS and non FCC only.
    Thanks
    Gaurav

  • Issue is with OpenGL. System Info it allows Normal Mode but does not allow Advanced Mode.

    Problems with Repousse 3D feature in Photoshop CS5 Extended  
    I am trying to use the Repousse 3D feature in Photoshop CS5 Extended and have been unable to figure how I can get it to be an option using text. Can you explain how I do this, please?
    I have also tried rasterizing the text first and that does not work. I have tried placing the image and them loading the selection and I still do not have the option of Repousse.
    I believe the issue is with my OpenGL. In the System Info it allows Normal Mode but does not allow Advanced Mode. I spoke with the "Geek Squad" who advised that this is not an issue with my Mac but has something to do with the software.
    Can someone please help me fix this?  Thanks.

    If you really want help you may have to provide relevant information about your OS, GPU, its VRAM …

  • No Basic/Advanced Mode with Adjustment Brush

    I have LR3 and can't make any changes using the Adjustment Brush.  I can highlight an area (and change colors of the overlay) but that's it...any ideas on what I'm doing wrong?  I also have no Basic/Advanced switch...
    thanks

    The basic/advanced modes were removed from the application as part of the Lr3 update. Hit H key to make the brush visible and O to toggle overlay on/off. Make sure that Density and Flow sliders are not set to Zero. You may have to toggle open the full brush panel to see these options.

  • Af:query 'Hiding Unwanted Operators in Advanced mode having blank selection

    Hi,
    This is regarding 'Hiding Unwanted Operators in Advanced mode of af:query Component', I have followed the post by Jobinesh (http://jobinesh.blogspot.com/2013/01/prart-2-hiding-unwanted-operators-in.html)
    The attribute is non-default attribute and when we add the attribute from 'Add Fields' section it will be having blank selection option even if I have added below two lines under 'ViewAttribute' tag.
    <CompOper Name="Name" ToDo="-1" Oper="ISBLANK" MinCardinality="0" MaxCardinality="0"/>
    <CompOper Name="Name" ToDo="-1" Oper="" MinCardinality="0" MaxCardinality="0"/>
    Kindly suggest:
    1. How to remove blank selection operator.
    2. How to set particular operator as default operator in XML.

  • Start with Advanced mode in Query Panel

    JDev 11.1.1.5.0 ADF BC
    I have a query panel in my form with table made from View Criteria.
    When runs, it starts with Basic mode.
    I want this to be changed to start with Advanced mode straight away.
    Is that possible?

    Hi,
    Edit the ViewCriteria. In the UI Hints tab set Search Region Mode to Advanced.
    Kevin
    Message was edited by: KevinAngus - you beat me Timo!

  • How to control the number of fields in the Advanced mode in af:query

    Hi,
    How to control the number of fields in the Advanced mode in <af:query>?
    Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
    How do i control the list of fields in ADDFields button?
    Any ideas?
    KR

    You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
    http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

  • Can we have more than 2 "and/or" conditions in filters in advanced mode in power view?

    Hi,
    I need to check 3 conditions in filter in advanced mode in power view. Is it possible out-of-box. Can we customize the advanced mode filters or do we have some configurable options for same.
    Thanks,
    Bhawna.

    Hi Bhawna,
    I'm the Dev Owner for the filtering experience in Power View.  Sorry it took so long for me to reply.
    In the Power View Advanced Filter cards, you cannot currently add more than two conditions.  What Rhys meant about having as many AND filter conditions as you like is that because all of the filter cards are AND-ed together, you can effectively have
    more than two filter conditions by adding multiple 'LastModifiedDate' cards.
    Unfortunately this won't help you if you're looking to OR more than two conditions.
    Adding the ability to have more than two conditions in a single Advanced Filter card is something that is near and dear to my heart, but it does open questions of nesting and grouping which would need to be addressed first in order to be able to offer a
    complete solution.
    Hope this helps,
    Jeremy

  • Start Installer in Advanced Mode

    Hi,
    is it possible to start the Installer in Advanced Mode instead of Simple Mode?
    We created our own Catalog and everything but for our Developers it is a bit confusing that they always have to switch to Advanced Mode before they can proceed.
    Regards
    Lasse

    Hi Lasse,
    I'm just about to commit changes that include support of a new system property. With this you'll be able to default to
    the advanced mode:
    -Doomph.setup.installer.mode=advanced
    I'll track it via https://bugs.eclipse.org/bugs/show_bug.cgi?id=431124
    Cheers
    /Eike
    http://www.esc-net.de
    http://thegordian.blogspot.com
    http://twitter.com/eikestepper
    Am 01.07.2015 um 21:20 schrieb Lasse Knudsen:
    > Hi,
    >
    > is it possible to start the Installer in Advanced Mode instead of Simple Mode?
    >
    > We created our own Catalog and everything but for our Developers it is a bit confusing that they always have to switch
    > to Advanced Mode before they can proceed.
    > Regards
    > Lasse

  • Af:query advanced mode.How to hide ???

    I am using Jdeveloper 11.1.2.3.0
    I have a af:query component. I need to have the advanced mode features like add fields but I want to know is there a way to make the screen have the look and feel of basic mode.(Just to have one search box for a field ,not the another search box with has the drop down options like "equals,contains" etc ).
    Is there a way to avoid coding by using "CompOper" to hide each and every option in the search field ?
    Could some one pls guide me ????
    - Pani

    In the Structure window, double-click af:query.
    In the Property Inspector, click the Appearance tab.
    To enable the basic/advanced mode button, select true from the ModeChangeVisible field. To hide the basic/advance mode button, select false from the ModeChangeVisible field.
    You can Edit View Criteria as well, set the Search Region Mode to Basic.

  • AF:Query -how to hide attribute in basic mode but show/add in advanced mode

    Hello,
    I have a requirement to initially hide some attributes when displayed in BASIC mode of af:query with the possibility to add these hidden attributes in ADVANCED mode.
    Is it doable somehow?
    edit: JDeveloper 11.1.2.3.0, ADF BC
    Regards,
    Miroslaw
    Edited by: Miroslaw on 2013-01-16 14:59

    Hi,
    Always mention your JDev version.
    If you are using BC4J as your model, you can create view criteria and set which attribute to be visible in which mode under UI hints, and use this criteria as query panel in your page.
    -Arun

  • No advanced mode on Mac OSX?

    I'm usin the VPN client 4.9.01 on Mac OX 10.6 and I can not activate the advanced mode in order to set up or configure connections. The software starts in simple mode, CMD+M does not doe anything and if I click on 'Options' the Advanced Mode is greyed out. I already tried uninstall and reinstall but the situation doesn't change. It's unbelievable frustrating, how can I resolve this?

    I have exactly the same problem and also tried uninstall and reinstall but nothing works. How to solve this?

Maybe you are looking for