Advanced Port Replicator for TE2000 Notebook
I have just bought a s/hand TE2000. Can anyone please tell me which model APR I should buy to go with it? Thanks
Hi
I have found the same info. Under options for this model there is listed Port Replicator with part number PA3082U/E-1PRP.
Similar Messages
-
Hi speed USB via an Advanced Port Replicator for a Tecra 9100?
I have the same issue with a Tecra 9100 and upgrading it to hi speed USB as an earlier post where the suggested solution was to use a PCMCIA card.
(see link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24103)
I had an idea but i don't know if it will work and need some advice?????
Can you buy an Advanced Port Replicator that has Hi Speed USB 2.0 ports on it (like the APR II PA3082U which works with the Tecra 9100) instead of the PCMCIA card.
If the Port Replicator docks into the motherboard will it give you Hi Speed USB 2.0 or is the Tecra 9100 constrained to USB 1.1 via the hardware within the laptop itself and the port replicator won't help?
Also if I go down the Port Replicator route do i need any drivers for the Hi speed ports of the Port Replicator to work on the Tecra 9100?
Or to ask the question another way - what does the PCMIA USB 2.0 card have in it that the Advanced Port Replicator with hi speeed USB doesn't have?
Many thanks in advanceHi there,
the Tecra 9100 has NO usb 2.0 and thats a fact. Since the port replicator has these USB 2.0 ports does not mean that your machine, when docked to the Portrep, is able to handle USB 2.0 devices. The portrep is just like an usb-hub and behaves like. So if your machine doesnt have it then thats it.
And the explanation to the PCMCIA/Cardbus solution:
The pcmcia card has USB 2.0 Chipset, thats the reason why it IS a USB 2.0 device (roothub).
I hope that was clear for you :)
Just purchase that card and you will have USB 2.0
Greets -
Where can I download a user manual for Advanced Port Replicator III plus
Where can I download a user manual for this?
I have searched the download manuals section but cannot find a reference to this.
Thanks for any helpSeems this manual is not available in the Toshiba user manual page.
But usually you should receive a user manual together with the Advanced Port Replicator III plus. -
Is Advanced Port Replicator III plus compatible with Portege R200
I just ordered a new Portege R200 and the above port-replicator... however, I note that the R200 isn't listed in the supported notebooks list for that replicator! Can anyone confirm if I have made a mistake and need to change the order?
WillI have visited the Options & Accessories area on the Toshiba European site and as you already said the Portg R200 is not listed in the list of compatible notebooks.
So I presume the Advanced Port Replicator III plus (PA3474E-1PRP) does not support the Protg R series. -
Need Advanced Port Replicator III drivers to use it with my Portege M300
Hi,
I have a Portege M300 with an Advanced Port Replicator III. I've had to reinstall the operating system and now can't find any drivers for the port replicator.
Can anyone help me out? I'm running Win XP
thanksHi
I assume you need drivers for the XP OS. Am I right???
On the Toshiba driver page you will find all necessary drivers and utilities for Portg M300.
There you will find also the installation instruction document. This document shows the right installation order.
You should simply download all drivers and follow the installation order. Thats all -
Advanced Port Replicator III Plus Driver/Frimware
Hi,
I am having a number of problems with my Poretege M300 on Advanced Port Replicator III Plus. Some Fn keys aren't working and I'm not able to get the correct screen display on my external monitor.
Question: are there drivers for the Port replicator? I don't have a CD or any other installation media.
Thanks, RichardPedro,
Thanks for this.
I have reinstalled the Common Modules and now when I undock the Fn F5 key works K to toggle between screens. I guess this is disabled when docked?
But I still can't use the Toshiba Assist and Presentation buttons, although I have also reinstalled the drivers for these as well.
The M300 supports the external screen resolution OK, but I have to re-arrange my desktop every time I dock and use the higehr resolution external screen.
Richard -
Port replicator for Equium A60
i want to use a port replicator for a A60 equium laptop can anyone advise what to use as i cannot see one listed for this laptop
Hello
Nick is absolutely right. It can not be connected to port replicator. All units that can be connected to port replicator have expansion port at the bottom side.
Bye -
Potege S100: Advanced Port Replicator/Docking Station
I need to know which docking station to use please.
Advanced Port Replicator III Docking Station
Will this one work?Hello Andrew
I found some nice infos about the unit which is compatible with your Portege S100.
Check this link:
http://www.costcentral.com/proddetail/Toshiba_Advanced_Port_Replicator_III/PA3314U1PRP/C90140/
Hope, I could help
Bye -
0A33944 Port replicator for Ideapad S206
I have recently bought a S206 ideapad computer fitted with Windows 8 and am pretty happy with it.
I want to use a port replicator to provide quick access for mouse, keyboard and monitor. Is Lenova item 0A33944 suitable? In particular it seems to fit my requirements but web information only states it works with Windows 7.
Moderator Note; p/n added to subject lineDear Customer
Welcome in lenovo forums
Can you please go to the BIOS and open the Boot tab and send USB boot as a first priority
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Port replicator for P200 series?
Hello, what kind of port replicator should I buy to work with a P200-RT9 series laptop?
Hello
Nick is absolutely right. It can not be connected to port replicator. All units that can be connected to port replicator have expansion port at the bottom side.
Bye -
I can buy a 42W4631 replicator, but I am not 100% sure if it will fit a W530. When I search the Lenovo site i see it will fit a W500. I DO NOT read a "W500-SERIES", so I'm afraid it won't fit ??? Can anyone help me please ? Thanks !
Solved!
Go to Solution.Sorry, but I have one more question.
Are you SURE the 4337 will fit ????
What is the difference between the 4337 and 4338 please ?
I have a 170W adapter
Edit: I just bought a 4338 -
T61P BSOD when docking with Advanced Port Replicator
Seems that I'm seeing more and more BSOD when hot docking my T61p running Windows Vista. Machine is on and I dock and get BSOD. Any ideas? This was working fine for a while, I'm not sure what changed
Thanks... that's interesting...
So this Dynadocking station looks good (unless someone can point me to potential drawbacks). It leads me to believe that I can ditch the idea of buying a new Toshiba laptop and actually buy another brand and use the new laptop and my old M5 with the same Dynadocking station.
In that case, my remainder question is: I have internal drives that I swap in/out both my M3 and my M5. *Has the internal hard drive interface changed as well with the M9?*
Cheers
Daniel -
Port Replicator III+ very high cpu when moving usb mouse only in W2k
Tecra M2 with a port replicator III+
It's set to dual boot into XP and Win2000 (yes I know it's getting on a bit, but I've got a lot of stuff installed in win2k that is difficult to get hold of these days).
XP is 100% fine, but with win 2000 if I use my *USB mouse* on the *port replicator* ports and waggle the mouse around - the *CPU* jumps from 0 to *70+%* usage (the system process which I think indicatates as IRQ problem). If I plug the mouse into the laptop ports (when the laptop is docked) - it's fine, at most 5% cpu usage. It's a basic microsoft mouse. I definately think it's a usb problem of some kind, because the cpu even jumps a bit if I type quickly on my usb keyboard (only a couple of %). It happens with all the replicator's usb ports.
Any ideas? I don't really want to plug in my mouse in the morning because it kinda defeats the point of having a docking station in the first place! I've got the mobile extensions installed. All the other aspects of the replicator are fine
MartinHuh it will not be easy to find good explanation for this.
At this time when Tecra M2 was offered on the market as compatible port replicator Toshiba has offered Toshiba Advanced Port Replicator III (not +) and at this time both supported operating system was tested with it.
Later Toshiba has designed Toshiba Advanced Port Replicator III+ and confirmed compatibility with Tecra M2 but obviously with newer (at this time) WXP.
So now you have follow situation: you use newer port replicator but with much older operating system so I presume there is maybe some compatibility problem with W2K.
I cannot imagine you use it so often with W2K and if yes it cannot be so problematic to connect mouse directly on notebooks USB port.
Sorry but I dont think there is anything you can do about it. -
Hello,
I received today the Port replicator but could not get the PC to recognize this and create a "docked" hardware profile.
Going trough diferent searches I could not find if the port replicator should allow "docking" or not
The use of the port replicator is mainly to be able to disconnect the second monitor, external keyboard, mouse and LAN when I have to move into an other room and being able to link up to projectors trough the VGA portHuh it will not be easy to find good explanation for this.
At this time when Tecra M2 was offered on the market as compatible port replicator Toshiba has offered Toshiba Advanced Port Replicator III (not +) and at this time both supported operating system was tested with it.
Later Toshiba has designed Toshiba Advanced Port Replicator III+ and confirmed compatibility with Tecra M2 but obviously with newer (at this time) WXP.
So now you have follow situation: you use newer port replicator but with much older operating system so I presume there is maybe some compatibility problem with W2K.
I cannot imagine you use it so often with W2K and if yes it cannot be so problematic to connect mouse directly on notebooks USB port.
Sorry but I dont think there is anything you can do about it. -
External keyboard only works after reboot with Port Replicator III Plus
The problem is that when I boot the notebook, the external PS/2 keyboard doesn't work. When I reboot the keyboard flips on and then I can use it.
This problem occurs on a Toshiba Tecra notebook with a Advanced Port Replicator III Plus. I've used several keyboards, so that isn't the problem. I've changed a value in the bios which is used for USB devices (mouse/keyboard). I disabled the option, because I use a PS/2 mouse and keyboard, but the problem isn't solved. I hope someone has an answer to this problem.Hello
I presume that there is something wrong with docking procedure and touchpad. Try to disable the Touchpad while the Notebook is docked.
Try also to install mobile extensions again.
Maybe you are looking for
-
I must use Firefox 3.6.18 because my college claims it is the only browser compatible with their version of Bannerweb software. I dl'd Firefox from the link they gave me, http://filehippo.com/download_firefox/download/0a12ac3c44501912fff7cc544421ae7c
-
Where can I see what devices are connected to my Airport Extreme?
I just switched from a Belkin wireless-g router to the Airport Extreme (802.11n). With my Belkin router, when I entered the address "192.168.2.1", I was taken to a menu where, among other things, I could view all connected devices. How do I do that w
-
How can i reformat my harddrive using the recovery disk stored in partition drive?
hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partitio
-
PO will not print if line items are trash-canned
Hello, We have an instance where we had to cancel both line items on a PO. However, the system will not allow a printout, since there are no line items. How can we get a printout to send to the vendor to confirm that both line items are cancelled?
-
Cd burning throug itunes on win xp x64?
I'm running xp x64 and get the 'cannot find cd buner or software' message. Can anyone help?