Advanced Pricing - Assistance with Freight Modifier

Hi All
Can anyone assist with a Freight and Special charge modifier I am trying to create in 11.5.10.2
Scenario:
Due to this being product category related I have to create line level modifiers
1 x item ordered Freight cost = £8.50
2 - 3 items ordered Freight Cost = £15.50 (lumpsum)
4+ items ordered £15.50 (lumpsum) + £5 per additional item
The complete order will have to recalculate to ensure the correct carriage is finally charged
Any help would be gratefully recieved
Regards
T

You may have to use a formula to define the same condition using "CASE.. WHEN.. ELSE IF..END" statement.
Regards,

Similar Messages

Query regarding Advanced Pricing

Hi All,
I have an issue in setting up for a requirement,
There is an offer provided to the customer.
e.g customer buys ITEM A and ITEM B in the deal, then customer may be eligible for 10% discount on both ITEM A and ITEM B or customer is eligible for 20% discount on ITEM B only.
How to handle this in Advanced Pricing module.Provide the setup details.
Appreciate your help me in this regard
Thanxs & Regards,
Saiprasad.N

Hi,
You can set this up using the 'Other Item Discount' modifier in Advanced Pricing.
Requirement 1
Modifier Header - Promotion
Modifier Type Line - Other Item Discount
Item - Item A
Enter the following details in the 'Details Page'
Additional Buy Product - Item B
Get Item - Item A and Item B with 10% discount
Requirement 2
Modifier Header - Promotion
Modifier Type Line - Other Item Discount
Item - Item A
Enter the following details in the 'Details Page'
Additional Buy Product - Item B
Get Item - Item B with 20% discount
Regards
Pradeep

Hi Any body guide me for Advance pricing setups and implementation manual with screen shots

Hi Any body guide me for Advance pricing setups and implementation manual with screen shots
Regards
Guru

Hi,
Please <b>read the rules of engagement</b> before posting.
<b>- Do not ask to send you an email.</b>
The question you ask and the solution to it is often also interesting for other users of the community. If you ask somebody to send you the answer per email, you deprive others of also learning to know the answer. Therefore any requests for sending material or answers to an email address will be modified by the forum moderators.

Need Help for API Modifier in Advance Pricing

Dear Gurus, i've problem when i run API create modifier there is an error message:
"err msg 1is: Attribute list_type is invalid. Please re-enter."
can u help me solve this problem ??
Thx,
Dedy
my example script is :
===============================================================================
CREATE OR REPLACE PROCEDURE AAA is
--SET VERIFY OFF
--WHENEVER SQLERROR EXIT FAILURE ROLLBACK;
--set serveroutput on
--declare
/* $Header: QPXEXDS3.sql 115.3 2002/05/31 22:24:21 mkarya noship $ */
l_control_rec QP_GLOBALS.Control_Rec_Type;
l_return_status VARCHAR2(1);
x_msg_count number;
x_msg_data Varchar2(2000);
x_msg_index number;
l_MODIFIER_LIST_rec QP_Modifiers_PUB.Modifier_List_Rec_Type;
l_MODIFIER_LIST_val_rec QP_Modifiers_PUB.Modifier_List_Val_Rec_Type;
l_MODIFIERS_tbl QP_Modifiers_PUB.Modifiers_Tbl_Type;
l_MODIFIERS_val_tbl QP_Modifiers_PUB.Modifiers_Val_Tbl_Type;
l_QUALIFIERS_tbl QP_Qualifier_Rules_PUB.Qualifiers_Tbl_Type;
l_QUALIFIERS_val_tbl QP_Qualifier_Rules_PUB.Qualifiers_Val_Tbl_Type;
l_PRICING_ATTR_tbl QP_Modifiers_PUB.Pricing_Attr_Tbl_Type;
l_PRICING_ATTR_val_tbl QP_Modifiers_PUB.Pricing_Attr_Val_Tbl_Type;
l_x_MODIFIER_LIST_rec QP_Modifiers_PUB.Modifier_List_Rec_Type;
l_x_MODIFIER_LIST_val_rec QP_Modifiers_PUB.Modifier_List_Val_Rec_Type;
l_x_MODIFIERS_tbl QP_Modifiers_PUB.Modifiers_Tbl_Type;
l_x_MODIFIERS_val_tbl QP_Modifiers_PUB.Modifiers_Val_Tbl_Type;
l_x_QUALIFIERS_tbl QP_Qualifier_Rules_PUB.Qualifiers_Tbl_Type;
l_x_QUALIFIERS_val_tbl QP_Qualifier_Rules_PUB.Qualifiers_Val_Tbl_Type;
l_x_PRICING_ATTR_tbl QP_Modifiers_PUB.Pricing_Attr_Tbl_Type;
l_x_PRICING_ATTR_val_tbl QP_Modifiers_PUB.Pricing_Attr_Val_Tbl_Type;
mll_rec qp_list_lines% ROWTYPE;
pra_rec qp_pricing_attributes% ROWTYPE;
Begin
OE_MSG_PUB.Initialize;
/* Create a Modifier header of type 'DLT' (Discount List) */
--l_MODIFIER_LIST_rec.currency_code := 'IDR';
l_MODIFIER_LIST_rec.list_type_code := 'DLT';
l_MODIFIER_LIST_rec.start_date_active := sysdate;
l_MODIFIER_LIST_rec.end_date_active := trunc(sysdate) + 10;
l_MODIFIER_LIST_rec.source_system_code := 'QP';
l_MODIFIER_LIST_rec.active_flag := 'Y';
l_MODIFIER_LIST_rec.name := 'TEST01';
l_MODIFIER_LIST_rec.description := 'Latest New Description of HALLOWEEN 2000';
l_MODIFIER_LIST_rec.version_no := '9.4';
l_MODIFIER_LIST_rec.pte_code := 'ORDFUL';
l_MODIFIER_LIST_rec.operation := QP_GLOBALS.G_OPR_CREATE;
/* Call the Modifiers Public API to create the modifier header and a modifier line */
QP_Modifiers_PUB.Process_Modifiers(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_FALSE,
p_return_values => FND_API.G_FALSE,
p_commit => FND_API.G_FALSE,
x_return_status => l_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_MODIFIER_LIST_rec => l_MODIFIER_LIST_rec,
p_MODIFIERS_tbl => l_MODIFIERS_tbl
--,p_QUALIFIERS_tbl => l_QUALIFIERS_tbl
p_PRICING_ATTR_tbl => l_PRICING_ATTR_tbl,
x_MODIFIER_LIST_rec => l_MODIFIER_LIST_rec,
x_MODIFIER_LIST_val_rec => l_MODIFIER_LIST_val_rec,
x_MODIFIERS_tbl => l_MODIFIERS_tbl,
x_MODIFIERS_val_tbl => l_MODIFIERS_val_tbl,
x_QUALIFIERS_tbl => l_QUALIFIERS_tbl,
x_QUALIFIERS_val_tbl => l_QUALIFIERS_val_tbl,
x_PRICING_ATTR_tbl => l_PRICING_ATTR_tbl,
x_PRICING_ATTR_val_tbl => l_PRICING_ATTR_val_tbl);
if l_return_status = FND_API.G_RET_STS_SUCCESS then
--success;
COMMIT;
DBMS_OUTPUT.put_line('success');
else
--failure;
ROLLBACK;
DBMS_OUTPUT.put_line('failure');
end if;
IF l_return_status FND_API.G_RET_STS_SUCCESS THEN
RAISE FND_API.G_EXC_UNEXPECTED_ERROR;
END IF;
EXCEPTION
WHEN FND_API.G_EXC_ERROR THEN
l_return_status := FND_API.G_RET_STS_ERROR;
-- Get message count and data
dbms_output.put_line('err msg is : ' || x_msg_data);
WHEN FND_API.G_EXC_UNEXPECTED_ERROR THEN
l_return_status := FND_API.G_RET_STS_UNEXP_ERROR;
for k in 1 .. x_msg_count loop
x_msg_data := oe_msg_pub.get(p_msg_index => k, p_encoded => 'F');
-- Get message count and data
dbms_output.put_line('err msg ' || k ||'is: ' || x_msg_data);
end loop;
WHEN OTHERS THEN
l_return_status := FND_API.G_RET_STS_UNEXP_ERROR;
for k in 1 .. x_msg_count loop
x_msg_data := oe_msg_pub.get(p_msg_index => k, p_encoded => 'F');
-- Get message count and data
dbms_output.put_line('err msg ' || k ||'is: ' || x_msg_data);
end loop;
END;
========================================================================================

Do you have Advanced Pricing installed?
select status from fnd_product_installations
where application_id=(select application_id from fnd_application
where application_short_name='QP');
I is Advanced Pricing and S is Basic Pricing.
I don't think you can use the API if you are on Basic pricing (unless you have transportation execution implemented and it is called for that purpose).
Thanks
Nagamohan

Issue Coupon Modifier Line Type in Advanced Pricing

hi,
i have to issue coupon to the customers using the issue Coupon functionality in Advanced Pricing.For this i have created Modifier List Type of Promotion.And created two Modifier Lines of Discount and Coupon issue under this Modifier List.While Assigning the Discount Modifier Number to the Coupon moifier number field in the Coupon issue line iam getting the error "Coupon issue must have either 'Discount' or ' Promotional Goods' as its benefit modifier".help out to solve this problem.
regards
yesukannan

Hi Yesukannan -
I think you have the wrong forum. Your question is about Advanced Pricing, but this forum is for Advanced Planning.
Rgds,
Keenan Gangewere
[email protected]

How to modify input range (DAQ assistant) with a numeric control ?

hello every one
I am currently working with the NI USB-6218 acquisition card.
I would like, in order to acquire a signal, to be able to choose the input range of the DAQ assistant with a numeric control ( and not by opening the DAQ assistant window ) (like the "number of sample" and the "rate" entry...)
Is it possible and if yes, how ?
Thanks so much in advance for your answers !
Solved!
Go to Solution.

hello
sorry I forgot it. but after spending a few hours on the problem this morning, i solved it Apparently, I corrupted the general DAQmx assistant last friday. By restarting my computer this morning, this issue was solved and I was able to transform the constant into command for the input range.
Thanks a lot for your help !!!
Guyua

STO with freight--to beloaded on material at GR--Critical

Hi,
Scenario:Cross company stock transport
Goods are transfered from plants A to B.
PO in B with freight condition FRB1 is to be created.
Goods issued against this PO.
Goods are received in th B plant.
B comes to know the EXACT freight costs ( clearing charges,customs transportation etc) only after goods reach to B, so he wants to enter/modify the EXACT cost at the time of GR ie to load this cost on material.
But once GI is done, system does not allow to change/add the conditions in PO.
How this can be handled so to have delivery costs loaded on material at the time of GR in plant B?
This question has been raised by me earlier also but yet to find out any conclusive suggestion.This is very critical for me.
PLEASE suggest how this type of requirement is mapped.I am sure this is a very commonly followed process in any industry and in SAP must be mapped.
Thanks in Advance
Regards,
manOO

Hi Sairam,
Thanks for the feedback.
In my case the exact delivery costs are only known when the goods reach the destination.
I can put some prefixed value as the delivery cost.But once I issue the goods vide delivery created, I can not alter the freight costs.
In most of the cases, it will be very difficult to put the exact costs in PO and that is the problem.
How this can be handled then ?
Is there any way by means of which we can have conditions in Inbound delivery by means of which I can create a Inbound delivery and put the exact conditions there ..
Please suggest a another approach.
Thanks in advance
Regards,
manOO

Intercompany STO with inbound delivery with freight....Urgent

Hi,
I have following scenario to map.
There are 2 company codes A & B and a shipment of goods is to be transferred from A to B.
I wish to use Intercompany STO process with UB.
However, A & B are geographycally separated so there involves transportation costs which will be beared by B.
How can I have the pricing procedure if I wish to have one in STO ?
If I create some freight conditions then I can add the values but I will not able to know the exact freight charges till B receives the shipment and the invoice for the same.
In this case how can I use pricing procedure ?
If I do not enter any freight charges in PO then how can I add them before I do the GR in B as this is requirement to add freight costs on material at the time of goods receipt so to arrive at exact landed cost for that material in B.
Once I wish to transfer the goods from A to B, I will do delivery so that stock gets reduced from A otherwise if I wait till the stock is physically transferred to B and then B changing the PO and add freight and subsequently doing picking, PGI and GR ,it will not correctly reflect stock positions in A.
What is the better way I can map this process.
If I wish to use inbound delivery before receiving the goods in B can I add conditions in Inbound delivery ? If so how it can be done ?
So my intended procedure will look as
Intercompany STO-UB
Outbound Delivery
Picking/PGI
Inbound Delivery with freight
GR
Please suggest as this is very critical and important requirement
Thanks in advance
regards,
manOO

Hi,
Thanks for the feedback.I wished to use NB but I don't want to go with the regular NB and subsequent billing cycle.
I want to use UB.
Anyways, is there any way by which I can have freight cnditions added at the time of Delivery.Be it Outbound or Inbound.
Please suggest.
Thanks in advance
Regards,
manOO

Advanced Pricing in Service Charges

Hi,
I'm trying to get the Advanced Pricing engine to work with charging lines in Service. Right no there's no implementation of the pricing engine in Service Charging and Service Contracts on debrief/charges level or on contracts coverage level.
Are there any APIs that can be used to be able to have qualifiers, modifiers and their contexts to calculate prices directly in charging?
TIA.
Regards,
Robert.

Hallo Robert,
eventuell hilft dir folgender Metalinkeintrag weiter:
Note:303884.1
Gruß
Robert

Promotional items Oracle Advance pricing on book event

Hi,
I have created modifier for buy1 get1 free in oracle advance pricing. I works fine on book event in order management.
But I need to add the function which execute/run modifier in book workflow instead of it fires autiomatically.
I cannot find where from it executes and add modifer(add line to order) .
any help.

1) Create process constraint to restrict by responsibility and assign users to responsibility.
2) Create PTO Kit item(have A,B,C,D& E as included items) in Configurator. Create 'group of lines' modifier on this item in Advanced Pricing.
3) Create PTO with A,B,C and in modifier have a qualifier condition with quantity

Advance Pricing for Purchasing - Setup a Promotion

Hi. Its possible to setup a Promotion (buy one get more free) in Advance Pricing and refer it in a Purchase Order?
We are working on R12.1.3.
Thanks
ALejandra

Hi,
I dont see, you would be able to use promotional modifiers with PO's.
Recently we logged an ER with Development to incorporate the same
14736855 - NEED TO USE PROMOTIONAL MODIFIER ON PURCHASE ORDERS
Another ER 4584793: LIMITED FUNCTIONALITY OF ADVANCED PRICING (MODIFIERS, PROMOTIONS, DISCOUNTS, CON too exists.
Please review this
Oracle Purchasing Integration with Oracle Advanced Pricing – Release 11.5.10 (Doc ID 394490.1)
In this white paper you can see this
Promotional Goods (Buy x, get y at n%)
X Not supported
Regards,
Paarthy

Advance Pricing -- For Diwali Offer

How to give advance pricing for the this diwali offer
1. For a stores, any thing worth more or equal to Rs 1000, INR purchasing bill (say Bill A) , a coupon will be issued which can be used only once for the next purchasing bill (say Bill B) which has to be more equal to Rs 200 INR, and discount of 20% is applicable for purchasing Bill (that is BIll B). No Coupon will be issued for Bill B, even if the purchasing amount be more or equal to 1000 INR after discounting.
regards
adarsh

Hi,
I dont see, you would be able to use promotional modifiers with PO's.
Recently we logged an ER with Development to incorporate the same
14736855 - NEED TO USE PROMOTIONAL MODIFIER ON PURCHASE ORDERS
Another ER 4584793: LIMITED FUNCTIONALITY OF ADVANCED PRICING (MODIFIERS, PROMOTIONS, DISCOUNTS, CON too exists.
Please review this
Oracle Purchasing Integration with Oracle Advanced Pricing – Release 11.5.10 (Doc ID 394490.1)
In this white paper you can see this
Promotional Goods (Buy x, get y at n%)
X Not supported
Regards,
Paarthy

Advanced Pricing

In advanced pricing line modifier details, we have repeating grouping no's with different qualifier context, qualifier attribute, value from, value to and so on. We want to write a query showing these repeating grouping no's as a single line or record having same grouping no's but diffferent qualifier details. Please let me know if yo want the sample data output or if additional details are needed.
Thanks.
Edited by: [email protected] on Jun 20, 2010 12:59 PM

Try this ... the assumption is that your PTE is ORDFUL and that you're using US language ... adjust the code accordingly if that is not the case.
SELECT
qual.qualifier_grouping_no
, qtl.name
, qll.list_line_id
, qual.qualifier_context
, nvl(stl1.user_segment_name, stl1.seeded_segment_name) as qualifier_attribute
, qual.qualifier_precedence
, qual.comparison_operator_code
, qual.qualifier_attr_value
, qual.qualifier_attr_value_to
FROM
qp_list_headers_b qlh
, qp_list_headers_tl qtl
, qp_list_lines qll
, qp_segments_b seg1
, qp_segments_tl stl1
, qp_prc_contexts_b cxt1
, qp_pte_segments pte1
, qp_pricing_attributes qpa
, qp_qualifiers qual
WHERE 1=1
AND qll.pricing_phase_id > 1
AND qll.end_date_active is null
AND qll.list_header_id = qlh.list_header_id
AND qlh.end_date_active is null
AND qlh.list_header_id = qtl.list_header_id and qtl.language = 'US'
AND qual.list_line_id = qll.list_line_id
AND qll.list_line_id = qpa.list_line_id(+)
AND cxt1.prc_context_type = 'QUALIFIER'
AND cxt1.prc_context_code = qual.qualifier_context
AND seg1.segment_mapping_column = qual.qualifier_attribute
AND seg1.prc_context_id = cxt1.prc_context_id
AND seg1.segment_id = stl1.segment_id and stl1.language = 'US'
AND pte1.pte_code = 'ORDFUL'
AND pte1.segment_id = stl1.segment_id
ORDER BY
qual.qualifier_grouping_no

Using Advanced Pricing in Purchasing--r12

Can anyone give me the steps required to give a discount/surcharge on the PO price using Advanced Pricing. I understand that we have to set up modifiers and attach qualifier groups to such modifiers, but I'm not getting the desired results. I did not find any information regarding this in the Purchasing UG(r12).
Any document reference will be of immense help.
Thanx!!

Yes, to use Advanced Pricing in PO there are different setups involved you need to manage them well regularly, if there are frequent changes in discount rules.
Since you want to apply discount on PO Total, hence Blanket Agreements with Price Breaks (simpler alternative to Advanced Pricing) is not applicable in your case.
For the scenario mentioned it is important to know when you want to apply this discount/ surcharge. When the users are entering the PO do they already know the discount? Because apart from technical considerations you need to check for the impact on downstream processes upto the end of the cycle.
You can try to use the approach mentioned in your post using a trigger from Personalization/ a concurrent request. For concurrent request option you can try to use PO_CHANGE_API1_S.update_po but it will consider POs with Approved/ Requires Reapproval status and with restrictions. Like it won't update price if receipt exists against atleast one shipment and accrued and/ or invoice created etc. That's why "when" part of the question is important.
If you plan to use form personalization then be careful, as it may popup unwanted message windows confirming no. of
record(s) committed (as you have commit the changes). Also if you plan to update line prices directly in the form (not thru API/ backend) then there may be possible gaps. Say if there are mutilple lines & users clear some lines after query and then apply the discount then at form level it won't get applied to all lines for that PO.
Another important aspect is adjusting the line prices. As you will try to adjust line price based on total discount applied on PO total, after a price update takes place price changes will be rolled down to the shipment level for standard POs. The adjusted amount should match invoice to avoid un-matched recurring accrual entries.

How to download or upgrade to the io5 system on my iPad 2? Thanking everyone in advance for assisting me.

How to download or upgrade to the ios5 on my iPad 2 . Thanking you in advance for assisting me.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Advanced Pricing - Assistance with Freight Modifier

Similar Messages

Maybe you are looking for