Advanced print settings not working in cs6

Since updating to Yosemite, I cannot access the advanced print settings for my Epson 3880. I have the latest driver for the 3880. No longer can select the paper, profile, etc.

Problem Solved:
After uninstalling a previous version of Labview Runtime from the target machines and installing the newest version (which is consistent with my development environment) on the target machines, the Print Report.vi and all other report generation VI's I use seem to work fine.
Also important is to make sure that the lvrt.msi file on the development machine is up to date and consistent with the version of runtime on the target machines. This does not update automatically when upgrading to a newer version of labview (at least not when I updated from 6i to 6.02). It must be manually downloaded and inserted into the proper folder.
Thank you Ray at NI support.
Tom S.

Similar Messages

My HP photo smart C6280 printer does not work with CS6. Any Help?

My HP photo smart C6280 printer does not work with CS6. Any Help?

How does it "not work"?
What OS version are you using?

Printer settings not working on USB network printer since update to 10.6

I have a Canon Pixma IX4000 that is via USB connected to my server. We all print to it over ‘Printer Sharing’.
Under 10.5 you could use any setting on a computer, print it and the server would pass the settings on.
Since upgrading the server to 10.6 (not the server edition) I can for example no longer print in Grey.
All other computers are still on 10.5.
As a first step I upgrade the driver to the CUPS Printer Driver for OSX (10.26.0) ,as I figured that might be it (is also the only one for 10.6). (http://software.canon-europe.com/products/0010322.asp)
No luck.
Next I updated the drivers on the other machine. No luck.
Any suggestions as to what to do to fix this?
Ta

Hi Uriko - this sounds like something has gone wrong with your routing. I assume that you still have Internet access and the problem is limited to a specific domain.
Can you open your terminal program and type "nslookup URL" where you replace URL with the "specific url" you mentioned in your post.
For example for "nslookup www.demon.net" you get
Non-authoritative answer:
Name: www.demon.net
Address: 212.69.213.230
The last line contains the IP address. Use this instead of the domain name and see whether this works. For example, instead of pointing your browser at "http://www.demon.net/about-us" you would write "http://212.69.213.230/about-us"
Cheers
Michael

Print Settings not working in JDev 9.0.3??

I'm trying to print source code from JDevleoper 9.0.3.1035 and am having some problems.
Is there a way to set the page to print in Landscape? I've tried from the Page Setup and Print Menu's and neither are working for me?
Also, is there a way to print the way JDev 3.2 used to? It used to fit a lot more code on a single page?
Please Please restore JDev 3.2 printing capabilities in JDev 9?
Thanks
Bret

Works for me.
What OS/JDK etc are you using?

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

Redirected Printer is not working

Hello all,
We have a Windows Server 2012 R2 terminal server. We have set up two Lenovo thin clients to remote access this terminal server. The problem is that the redirected printer is not working on one of the thin client but works on the other one. I have made the
same settings on both of the thin clients.
The difference between these two thin clients is like following.
1. Printer: The one that is working is Canon printer and the one that is not working is HP printer.
2. They use different ISPs.
All other settings are the same. I did not find any error code from the event viewer too. The only thing that I have is this error message when I tried to print a test page. "Test page failed to print. Would you like to view the print troubleshooter
for assistance?" And when I click "Yes", it said I did not have the related service installed and I could not find the error code for this issue.
Does anyone have any ideas on this issue? Please share this.
Thank you very much.

Hi,
Thank you for posting in Windows Server Forum.
Based on your description it seems that there is issue with incompatible print driver. As you commented you can access for canon but not for HP. Please see that you have update version of HP driver is installed. If possible try to use RDS universal printer
driver and verify.
How to configure Microsoft RDS Universal Printing
Does this happen for any specific user or for all users? If this happen for any particular user then there might be issue with user profile got corrupt so need to clear user profile cache or delete it and re-login to check the result.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Photoshop extension building not working for cs6, works for the rest

I am building an extension for photoshop the manifest file is as below:
<?xml version="1.0" encoding="UTF-8"?>
<ExtensionManifest Version="4.0" ExtensionBundleId="Kit" ExtensionBundleVersion="2.0.0"
ExtensionBundleName="Kit" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ExtensionList>
<Extension Id="Kit.extension1" Version="2.0.0" />
</ExtensionList>
<ExecutionEnvironment>
<HostList>
<Host Name="PHSP" Version="[13.0,15.9]" />
<Host Name="PHXS" Version="[13.0,15.9]" />
</HostList>
<LocaleList>
<Locale Code="All" />
</LocaleList>
<RequiredRuntimeList>
<RequiredRuntime Name="CSXS" Version="3.0" />
</RequiredRuntimeList>
</ExecutionEnvironment>
<DispatchInfoList>
<Extension Id="Kit.extension1">
<DispatchInfo >
<Resources>
<MainPath>./index.html</MainPath>
<ScriptPath>./Kit.jsx</ScriptPath>
</Resources>
<Lifecycle>
<AutoVisible>true</AutoVisible>
</Lifecycle>
<UI>
<Type>Panel</Type>
<Menu>Beauty Retouching Kit</Menu>
<Geometry>
<Size>
<Height>580</Height>
<Width>250</Width>
</Size>
<MaxSize>
<Height>580</Height>
<Width>250</Width>
</MaxSize>
<MinSize>
<Height>580</Height>
<Width>250</Width>
</MinSize>
</Geometry>
<Icons>
<Icon Type="Normal">./pictures/thumb/Icon.png</Icon>
<Icon Type="RollOver">./pictures/thumb/Icon.png</Icon>
<Icon Type="DarkNormal">./pictures/thumb/Icon.png</Icon>
<Icon Type="DarkRollOver">./pictures/thumb/Icon.png</Icon>
</Icons>
</UI>
</DispatchInfo>
</Extension>
</DispatchInfoList>
</ExtensionManifest>
I tried this code for photoshop CC and CC 2014, it works for both but I couldn't get it to run for cs6 it gives the below error from the extension manager:
so isn't Version="[13.0,15.9]" correct? why would it not work for cs6? thanks in advance.

Hi,
CS6 doesn't support HTML Panels but Flash ones, this should be the why the Adobe Extension Manager fails.
You might find help here (Flash): Creative Suite Extension Builder and here (HTML): Extension Builder 3
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

Compression settings not working on Premiere Pro CC

I am a freelance editor working for a satellite delivery company. They have specific settings they require for their uplink signals. These setting have worked great on CS5, CS6 and CC2014. However the company is now using CC and these settings create HUGE pixels and the file is unusable. Why do the same settings not work on CC?

You're welcome.
https://blogs.adobe.com/kevinmonahan/2013/09/11/marking-posts-as-correct-or-helpful-on-the -adobe-forums/

Print Screen not working for user but working for Administrator

Satellite A100 Laptop Print Screen Not working for USER but is working for Administrator[ New ]
09-14-2009 11:25 AM
Hi I am new to this forum and am asking for your help. We are sharing a computer, the PrtSc key is working for the Administrator but not when we switch users. We have tried everything that we can think of: From opening a the page(S) we want to paste to not opening the pages. My most common usage is to PrtSc and paste it into an email , but barring that we have tried opening a page in notes, documents, word etc . Nothing seems to work. I do not get an error message , it just won't paste. Since we are not computer literate we are hoping you can help us with a solution . Thanks in Advance .

Jerry, that post you just answered was from nearly 4 1/2 years ago! And that's the last time the OP was here.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

Advanced print settings not working in cs6

Similar Messages

Maybe you are looking for